AVPresence component
Hi There,
I am using AVPresence component and when I change the size
manually for bigger image, it gives me very bad resolution.
I know becuase i am changing the size and Presenter Video
component inside that.
So is there any tip that I can change the size of that
component.
Thanks in advance.
One thing is Resolution at which you are publishing the
movie. You can try increasing to the limit your webcam supports.
Other thing might be Are you changing the size of AVPresence
component as a whole or changing size of Presenter Video inside
that component and all other components individually.
If you are changing the size of AVPresence itself without
changing the size of each component individually, it might stretch
the video digitally, might give bad resolution.
Hope this helps a bit.
Similar Messages
-
AVPresence component performance
We have been working at testing a virtual meeting room based
on the AVPresence component that came with FMS developer edition
and have had some good results.
We had some very promising tests with participants across the
country and even from Africa and Europe having very useable
experiences.
But we have also experienced inconsistant performance
including audio being out of sync with the video (by 10 or 20
seconds), the video displaying in "slow motion" or some
participants experiencing long delays in receiving the video/audio
stream (30 to 45 seconds) between one person asking a question and
the other participant hearing the question.
Some of the longest delays were to participants in Brazil
(the FMS is located in Canada) but we also saw unexceptable
performance to computers on the same network as the server and also
to some participants using the internet cable provider as the
server is connected to. The problems have occurred with only 2 or 3
connections so it is not running into the 10 connection limit on
the developer license.
Are these poor results simply some of the "limitations" built
into the developer edition ? Or are we going to continue to run
into serious user experience issues once we move to a fully license
FMS?FMS components were not create to have best performance so
you should never rely on a FMS component in a commercial product...
The worst component is probably the connection light that will call
server a the interval you set this is a major issue (you should
call server only when you need this data). Developer license is the
same as the full license.
Your delay can from a lot of things for each client : slow
computer, slow internet connection, firewalls, upload and download
limits, flash player version, OS platform(sound echo on Mac when
sound kHz is under 44), ...
From server side : Ram size, CPU power, do you use FMS and
your Web Server on the same computer, bandwidth size allow, are you
connecting directly to the RISQ network(in Canada)...
Delay that you obtain is to long, is absolutely NOT NORMAL
for sure. Sometime, from my experience, problem is 30 inch in front
of monitor... so try the same test with a competent technician...
If computer on the same network in the same location had poor
results problem is probably from your network or your server...
post more technicals informations if you can! -
Creating a 'high-def' AV Component
I'm working on a virtual classroom videochat application for
Communication Server MX. I'm about 4 days into my experience with
Flash Comm and I'm not very far along.
The application calls for four small live video spots for the
professors who are presenting and on larger video spot for the
classroom camera. I've tried doing this using Flash MX' AVPresence
component linked to the simple connect component. This setup works
but gives end-users horrible video quality.
I've read around and found that the problem is that I am
essentialy stretching the video by specifying a larger size than
the default at that is the source of the distortion and pixelation.
I also found many people who suggested that the solution was to
build a custom video component that allows enlarging the feed.
So far I can't find any sort of guide that suggests I can do
this or explains how. I've got pages of documentation but I don't
know enough about the stuff to sort out where to start piecing
together this component.
Can anyone give me or direct me to some good resources or
tutorials for creating a higher resolution video component?Along with making the video object larger, you also have to
tell the camera what resolution to capture at (I think the default
is 160x120).
Look in the docs for the camera class, specifically the
setMode() method. Once you change the camera image dimensions to
match the size of your video object, the picture will clear
up. -
Problem with inputText in my custom component
Hi, I have a custom dataTable component that I'm trying to get to work. It has to be a custom component because dataTable doesn't support rowspan, colspan, multi line headers, and a rendered attribute for rows. The problem is, that when I wrap the column tag inside my row tag then the method for the inputText tag never gets called in the UPDATE_MODEL_VALUES phase.
I'm starting to think that JSF doesn't support 2 levels of tags between the inputText and dataTable. I'm hoping that someone can tell me what I have wrong with my components.
Here is the JSP snippet.
<cjsf:rptTable>
<cjsf:data id="dataTable1" value="#{allAuthUser.tableRows}" var="myTableRow1">
<cjsf:row>
<cjsf:col>
<h:inputText id="tableTestFld" value="#{myTableRow1.testFld}" size="5" maxlength="5"/>
</cjsf:col>
</cjsf:row>
</cjsf:data>
</cjsf:rptTable>Here is what it renders. It looks to me like everything renders fine. So I'm guessing that there is something in a component that is causing JSF during the life cycle to not be able to process correctly.
<table>
<tbody>
<tr>
<td><input id="tblmaintForm:body:dataTable1_0:tableTestFld" name="tblmaintForm:body:dataTable1_0:tableTestFld" type="text" value="" maxlength="5" size="5"/></td>
</tr>
<tr>
<td><input id="tblmaintForm:body:dataTable1_1:tableTestFld" name="tblmaintForm:body:dataTable1_1:tableTestFld" type="text" value="" maxlength="5" size="5"/></td>
</tr>
<tr>
<td><input id="tblmaintForm:body:dataTable1_2:tableTestFld" name="tblmaintForm:body:dataTable1_2:tableTestFld" type="text" value="" maxlength="5" size="5"/></td>
</tr>
</tbody>
</table>Note: If I leave off the row tag it renders the same way except of course the <tr> and </tr> tags are missing. If I do this, then the backing method for the inputText tag is called and everything works fine. Why doesn't it work with the row tag in place?
Here are the components:
public class UIRptTable extends UIComponentBase {
public UIRptTable() {
setRendererType("tblmaint.rptTableRenderer");
public String getFamily() {
return "javax.faces.Output";
public class UIRptTableData extends HtmlDataTable {
public UIRptTableData() {
setRendererType("tblmaint.rptTableDataRenderer");
public String getFamily() {
return "javax.faces.Data";
public class UIRptTableRow extends UIOutput {
public UIRptTableRow() {
setRendererType("tblmaint.rptTableRowRenderer");
public String getFamily() {
return "javax.faces.Output";
public class UIRptTableCol extends UIColumn {
public UIRptTableCol() {
setRendererType("tblmaint.rptTableColRenderer");
public String getFamily() {
return "javax.faces.Column";
}Here is part of the faces-config file in case you need it.
<!-- Components -->
<component>
<component-type>tblmaint.rptTable</component-type>
<component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTable</component-class>
</component>
<component>
<component-type>tblmaint.rptTableData</component-type>
<component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTableData</component-class>
</component>
<component>
<component-type>tblmaint.rptTableRow</component-type>
<component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTableRow</component-class>
</component>
<component>
<component-type>tblmaint.rptTableCol</component-type>
<component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTableCol</component-class>
</component>
<!-- Render Kits -->
<render-kit>
<renderer>
<component-family>javax.faces.Output</component-family>
<renderer-type>tblmaint.rptTableRenderer</renderer-type>
<renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableRenderer</renderer-class>
</renderer>
</render-kit>
<render-kit>
<renderer>
<component-family>javax.faces.Data</component-family>
<renderer-type>tblmaint.rptTableDataRenderer</renderer-type>
<renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableDataRenderer</renderer-class>
</renderer>
</render-kit>
<render-kit>
<renderer>
<component-family>javax.faces.Output</component-family>
<renderer-type>tblmaint.rptTableRowRenderer</renderer-type>
<renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableRowRenderer</renderer-class>
</renderer>
</render-kit>
<render-kit>
<renderer>
<component-family>javax.faces.Column</component-family>
<renderer-type>tblmaint.rptTableColRenderer</renderer-type>
<renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableColRenderer</renderer-class>
</renderer>
</render-kit>I sure hope that someone can help me out. Please let me know if you need any additional information.
Thanks,
RayHi, Ray!
1) I was trying to put a button in the column header (for sorting) and I couldn't get that to work. That involved the >colhdr tag. I got that to work but I don't remember the fix. I'll look it up and reply back with that when I can.Dealing the first part of your trouble, you need NOT a custom component.
I have looked through the implementation of RepeaterRenderer, as you advised me, and found that the multi-header possibility is included in the implementation of dataTable control.
The code below is the part of source of repeater.jsp with only change:
<d:data_repeater>  <h:dataTable>
And it works fine.
<h:dataTable id="table"
binding="#{RepeaterBean.data}"
rows="5"
value="#{RepeaterBean.customers}"
var="customer">
<f:facet name="header">
<h:outputText value="Customer List"/> <!� First Header row -- >
</f:facet>
<h:column>
<%-- Visible checkbox for selection --%>
<h:selectBooleanCheckbox
id="checked"
binding="#{RepeaterBean.checked}"/>
<%-- Invisible checkbox for "created" flag --%>
<h:selectBooleanCheckbox
id="created"
binding="#{RepeaterBean.created}"
rendered="false"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Account Id"/> <!�Second Header row -- >
</f:facet>
<h:inputText id="accountId"
binding="#{RepeaterBean.accountId}"
required="true"
size="6"
value="#{customer.accountId}">
</h:inputText>
<h:message for="accountId"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Customer Name"/> <!�Second Header row -- >
</f:facet>
<h:inputText id="name"
required="true"
size="50"
value="#{customer.name}">
</h:inputText>
<h:message for="name"/>
</h:column>
<h:column>
<f:facet name="header"> <!�Second Header row -- >
<h:outputText value="Symbol"/>
</f:facet>
<h:inputText id="symbol"
required="true"
size="6"
value="#{customer.symbol}">
<f:validateLength
maximum="6"
minimum="2"/>
</h:inputText>
<h:message for="symbol"/>
</h:column>
<h:column>
<f:facet name="header"> <!�Second Header row -- >
<h:outputText value="Total Sales"/>
</f:facet>
<h:outputText id="totalSales"
value="#{customer.totalSales}">
<f:convertNumber
type="currency"/>
</h:outputText>
</h:column>
<h:column>
<f:facet name="header"> <!�Second Header row -- >
<h:outputText value="Commands"/>
</f:facet>
<h:commandButton id="press"
action="#{RepeaterBean.press}"
immediate="true"
value="#{RepeaterBean.pressLabel}"
type="SUBMIT"/>
<h:commandLink id="click"
action="#{RepeaterBean.click}"
immediate="true">
<h:outputText
value="Click"/>
</h:commandLink>
</h:column>
</h:dataTable>
You may have a look at HTML source to prove that dataTable is already what you need:
<table id="myform:table">
<thead>
<tr><th colspan="6" scope="colgroup">Customer List</th></tr>
<tr>
<th scope="col"></th>
<th scope="col">Account Id</th>
<th scope="col">Customer Name</th>
<th scope="col">Symbol</th>
<th scope="col">Total Sales</th>
<th scope="col">Commands</th>
</tr>
</thead>
<tbody>
2.) The second trouble is still unsettled as previously. Right now I have different task at my job, and I can�t continue investigation of this problem.
But when you find smth., please let me know. I�ll be very grateful.
Regards,
Oleksa Stelmakh -
Mini dvi to Component Video adapter !
Help !
Where Can I Find "mini dvi to Component Video adapter" ?
Help !"there is no such thing in apple store"
I MAID,
Begging your pardon, but I just tried the above linked Search Results, and what you seek is apparently on the list, as the search was performed exactly as you specified. You can read the description of the various items for sale and tell us what is different about the one that you need. That way we can perform a new search for you, or, in the alternative, you can search for yourself. If the Apple Store doesn't have what you want, search CompUSA. -
Presently I have a mini display port>VGA adaptor, running to a convertor box I picked up that handles S-video out, which is working fine for SD. I also have a VGA to Component Video (5 wire RCA) adaptor cable. Connecting Component adaptor dircetly to the mini display adaptor doesn't seem to work, neither does plugging it into a VGA port on the SD convertor box. I am guessing there is another convertor box out there that will help me make the transition from mini display to Component. Even if it means having a handful of adaptors plugged in. does anyone know where to find such a wonderful and magical device?
ThanksYour setup works fine for DV, because you used a DV deck and most likely DV footage. But now you are working with 720p HD footage (what format, BTW? HDV, dvcpro HD?). That same setup won't work for monitoring HD. Now you need an HD box or card to send out a proper HD signal. And since you have an older G5, you won't find any current solutions. You'll have to look at used capture cards that are PCIx. Or you and look at the Matrox MXO, that connects to the computer via a monitor connection. DVI.
-
I want to hook up Apple TV but my One HDMI Jack on my TV is already connected to my HD cable box. My TV has jacks for s video, component, and PC in jacks.
Can I use one of them to connect to Apple TV with some type of cable to my newer I-pad ?Here are the Apple TV outputs.
What other outputs does your HD cable box have?
Apple TV (2nd and 3rd generation): Guide to ports and connectors
http://support.apple.com/kb/HT5713
Cheers, Tom -
Why do I need to declare "defaultButton" ? (In a component form part of view stack)
After doing some research and some help from FlexGuy in another thread, I realize that I need to make sure I have custom components initialized before accessing parts of the component. Just recently I was thrown for a long time when I tried to first click on a form field that was part of a component in my view stack, I'd get:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at mx.managers::FocusManager/focusInHandler()[C:\autobuild\galaga\frameworks\projects\framew ork\src\mx\managers\FocusManager.as:601]
With the debugger it's occuring in the focusInHandler method of FocusManager.as: (apparently _defaultButton is null.)
// restore the default button to be the original one
if (defButton && defButton != _defaultButton)
defButton.emphasized = false;
defButton = _defaultButton;
_defaultButton.emphasized = true;
This prompted me, on a whim, to delcare a defaultButton:
<mx:Form id="empForm" defaultButton="{submitButton}">
which refers to my submit button:
<mx:Button id="submitButton" click="submitEmployee()" label="{submitLabel}"/>
My question, is why is this necessary? In some examples I don't see this declared at all, but I seem to need it? (I'm calling creationPolicy="all" to make sure my components are initialized but I still seem to have to this defaultButton declared?)It's a way of proving that you are able to purchase content from that country's store i.e. that you have a valid billing address in it
From Why can’t I select None when I edit my Apple ID payment information? - Apple Support :
If you changed your country or region
When you change the country or region of an existing Apple ID, you must provide a payment method and update your billing options. If you want to remove your payment method after you change the country or region, you can change your payment information to None. -
IE Script error when double clicking on a view in Abap Webdynpro component
Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
BhupendraHi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy -
Create a new view in a enhance component
Hi All,
I want to create a new view for sales order and quatation in a component BP_factsheet.When i craete new view ,it is asking about some value like model node, bol entity, higher level, bol realtion.after that is is asking context node ,bsp application ,custome controller and view type.How can i get these value .when i create a new view then have to add these view in run time repositry under a window or not?
Thanks in advance....
VishwasHello Vishwas,
You might be interested in knowing how to customise the new UI to add a new view using the enhancement concept.
Please refer to the published document on the service marketplace:
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
refers to the link at
service.sap.com/okp
Inside this go to:
SAP CRM 2006s: Learning Map for Technology Consultants
wherein you can find the cookbook to perform similar operation in detail.
SAP CRM UI Cookbook
I hope this helps. -
Creating a new view in a component
HI,
I am trying to create a new view in a BSP component using the wizard. But the context nodes are not getting created. Its throwing up an error - "View not copied with wizard; processing not possible".
What could be the problem ? Pls help.
Regards,
Aravind.Hi Arvind,
Before posting error, please search for it.
Here is what i found here in 2007 forum itself.
I guess you have not enhanced your component and your view.
Without enhancing the component it is not possible to add a new context node.
Here is a very helpful, follow it and the the other link within this thread,
both are very useful in this regard.
Web Client Context Node Enhancement
Thanks & Regards
Shiven -
Error While Adding a Software Component
Hi All,
While adding a software component in the SLD, i am getting the below error. Can anybody please suggest me the possible reason for the same.
Storing changes to persistence failed. Please check both your J2EE engine and database are in a healthy running state. (Error: CIM_ERR_FAILED: [NWMss][SQLServer JDBC Driver][SQLServer]Could not allocate space for object 'BC_SLD_CHANGELOG' in database 'X7A' because the 'PRIMARY' filegroup is full.)
Also i would like to know what is a software unit in a SLD??
Thanks in advance,
KulwantIs there any DC checked in?
-
Error while opening a component in ACC
I am getting error while trying to open component in ACC. I can the component is running, but when tried to open it (either thro Open component or by double clicking on it) am getting the following error.
Any idea on the cause of this error?
Server exception:
java.lang.ClassNotFoundException: com.package.MyComponent
at atg.nucleus.SimpleComponentState.readObject(SimpleComponentState.java:593)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:306)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:155)
at atg.rmi.context.ContextualSkeletonImpl_Stub.invoke(Unknown Source)
at atg.rmi.context.ContextualStub.invokeSkeleton(ContextualStub.java:121)
at atg.security.proxy.UserSessionProxy$SessionStubHandler.invoke(UserSessionProxy.java:180)
at atg.rmi.context.ContextualStub.invoke(ContextualStub.java:95)
at $Proxy2.getConfigInfo(Unknown Source)
at atg.ui.component.model.ComponentClientImpl.getConfigInfo(ComponentClientImpl.java:352)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:214)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:198)
at atg.ui.component.ComponentBrowser.editSelectedComponent(ComponentBrowser.java:748)
at atg.ui.component.ComponentBrowser$EditAction.actionPerformed(ComponentBrowser.java:735)
at atg.ui.common.DevTree$MousePopupAdapter.applyDefaultAction(DevTree.java:266)
at atg.ui.common.DevTree$MousePopupAdapter.mouseClicked(DevTree.java:289)
at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
at java.awt.Component.processMouseEvent(Component.java:6266)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Client exception:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.lang.ClassNotFoundException: com.package.MyComponent
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:178)
at atg.rmi.context.ContextualSkeletonImpl_Stub.invoke(Unknown Source)
at atg.rmi.context.ContextualStub.invokeSkeleton(ContextualStub.java:121)
at atg.security.proxy.UserSessionProxy$SessionStubHandler.invoke(UserSessionProxy.java:180)
at atg.rmi.context.ContextualStub.invoke(ContextualStub.java:95)
at $Proxy2.getConfigInfo(Unknown Source)
at atg.ui.component.model.ComponentClientImpl.getConfigInfo(ComponentClientImpl.java:352)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:214)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:198)
at atg.ui.component.ComponentBrowser.editSelectedComponent(ComponentBrowser.java:748)
at atg.ui.component.ComponentBrowser$EditAction.actionPerformed(ComponentBrowser.java:735)
at atg.ui.common.DevTree$MousePopupAdapter.applyDefaultAction(DevTree.java:266)
at atg.ui.common.DevTree$MousePopupAdapter.mouseClicked(DevTree.java:289)
at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
at java.awt.Component.processMouseEvent(Component.java:6266)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.lang.ClassNotFoundException: com.package.MyComponent
at atg.nucleus.SimpleComponentState.readObject(SimpleComponentState.java:593)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:306)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:155)
... 33 more
Edited by: Gopinath Ramasamy on Sep 3, 2012 1:32 PMIf you have everything else in place then you may also try to check RMI specific java system property "java.rmi.server.codebase". Try adding the JAR containing your classes into the server's RMI codebase system property as "-Djava.rmi.server.codebase=http://myapp/classes.jar" in the java options of your server startup script. But you should first check what is the existing codebase value and then can specify additional JARs if you feel they should be made available for download to client. Refer http://docs.oracle.com/javase/1.5.0/docs/guide/rmi/codebase.html
You also mentioned about accessing component through REST call. Can you elaborate a little more on the whole environment and scenario that how/where exactly you are using ACC to view that component? -
Error while using Image component to display a child flash file
Hi
I'm using Xcelsius version 4.5. I used the "Image Component" to import a child flash file(.swf) into the parent flash file.
I gave the path "D:\246024\Loblaw\Dashboard Docs\New Folder\trend input.swf" in the general tab of the image component.
After exporting the .xlf into a flash file , it works fine in the system in which i created it. If i open the same flash file in any other system the parent file opens but the child flash file imported through the image component is not displayed.
Please help me out in solving this issue
Thanks
Anithayes, you will face the same problem as its still looking for the path of the swf.
you need to have the SWF on specific location which is accessable by the Parent SWF
usually web page or something which is accessable for all.
good luck -
Error while running SDK Component on Server Side
hello,
I have a SDK Issue. I've created a gauge using jgauge ( jgauge - jGauge is a dial gauge that is simple, powerful, and 100% javascript and css. - Google Project Hosting ) in a SDK Component, and it's work fine in Localhost, In order to change the Image of the gauge, I've used 64bit convertor and the out come is this:
the problem start when I've upload it to the server and tried run the Dashboard on Open Document / LanchPad.
the component came out really messed up, all the canvas component created by the application are scattered:
The problem repeats in every browser (EI, Mozila, Chrome). Product info:
Design Studio 1.2 SP01
BO 4.1 SP02
have anyone faced this kind of problem or any other problem in uploading SDK component to server?
thanks.I think you problem is on the following error.
Manifest fetch failed (404)http://***/BOE/OpenDocument/1312081147/zenwebclient/manifest.appcacheopenDocument.faces?logonSuccessful=true&shareId=0bttoken=MDAwRGoxU2JUMTtMVFZZXTFQRG1MRzBLTDQ5YWpvM…:1
Because all the others there i see on my SDK and it works.
When you execute it locally, those same errors appears?
And I have no clue what you have wrong there, but since the error mentions the MANIFEST, you should take a look there, here is example of one working.
Manifest-Version: 1.0
Bundle-ManifestVersion: 2
Bundle-Name: ComboBox
Bundle-SymbolicName: com.leandro.gp.combobox;singleton:=true
Bundle-Version: 2.3
Require-Bundle: com.sap.ip.bi.zen.rt.components.sdk.eclipse
Bundle-Vendor: Leandro
Make sure that the SymbolicName and Bundle Version are the same as in your contribution.xml.
Hope this helps.
Best
Leandro
Maybe you are looking for
-
How do I link an existing Behance Prosite with new CC membership?
I have a Prosite that I pay monthly for. I recently became a member of the Creative Cloud supscription as well. Can anyone tell me how I can eliminate my Prosite payment and link it up with my CC account since it is now included?
-
How to launch up to 5 websites?
In the Cloud marketing info, Adobe say that I can use their web hosting to launch up to 5 websites... I've now signed up to the cloud, but I can't find any info or help on how to start using this service... Does anyone know how...? Thank you
-
Which is better iphone 4 or iphone 4s??
i want to upgrade my iphone 4 to iphone 4s. is it worth it?
-
Oracle 9.2 - DataGuard - Physical vs Logical setup
We have database (in-house) with a few large tables (over 8M rows) and quite a few supplemental tables. Updates to this database are usually happen in batches, but single updates are also possible. We got a back-up server at another location (hosting
-
Okay, for starters, I think this is probably not explicitly an InDesign issue. I have a template I use in InDesign, and every time I try to print it to our color machine (Konica-Minolta bizhub Pro C5500/EFI Fiery Print Server), It processes in the qu