AVRCP Buetooth issues with Mighty Mouse interference (?) and SONY CMT-HX5BT

Hello:
Just got a SONY Bluetooth enabled mini stereo system (CMT-HX5BT). Knowing my iMac with OS X 10.4 doesn't support AVRCP Bluetooth (another issue entirely!) I downloaded the Softstick Audio Gateway for Mac. This will allow me to play my iTunes music on the SONY stereo. However, when the Mighty Mouse is switched on, the playback is exceptionally fragmented and almost non-existent except very short bursts. When the MM is switched off everything works wonderfully.
I am hoping that whomever is responsible for BT in general did think that BT Mice would be used at the same time as stereos/headphones. Hopefully this is an issue with something other than BT in general such as Softstick, the MM, or OS X. Any ideas?
Does anyone think upgrading to Leopard, and using the operating system's built -in AVRCP support be better than a third party application? Although I haven't found conclusive proof that OS X 10.5 actually has AVRCP support either. Does this mean Logitech will be getting my business as I switch back to a regular radio frequency cordless mouse?
Thanks for any suggestions.

Thanks for your answer, no problem... it's OK
why don't you try with OS X 10.5... I guess the A2DP is built in Leopard (natively)
Today I saw the CMT-HX5BT at the local shop, they obviously have no clue about its functionality with a Mac, but that mini hifi looks great and it's not even that expensive...
maybe I should buy it anyway...

Similar Messages

  • Strange Issue With QIP 7100 STB and Sony Bravia TV

    I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.   

    It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
    Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override?  This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version).  In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
    Hope that solves your issue.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Delay issue with mighty mouse and macbook pro. help?

    Connected but delayed in movement. I am connected to an HD tv via HDMI and only a delay issue on the tv monitor. The mouse responds as normal on the laptop screen if I have it open, but on the TV it is delayed. Any clue as to what might be wrong? I am running HDMI to a converter for the mini display port and have seen it work many times with no delay. I have changed the batteries and reconnected/restarted the computer and the mouse numerous times. 

    Hey there, I'm on the forums because I can't get my wireless mouse to connect to my new MacBook Pro either (just got it yesterday). Bluetooth Device Manager seems to "see" it when it searches, but insists it can't connect to it, saying either "device not found" (which is ridiculous, since it's right up there in the list) or "cannot find the necessary services." Yet I cannot find anything definitive on the tubes to say that the two don't work together. Anyone else have any ideas for us??
    I should mention I changed the batteries b/c at first I thought that's all it was. When it didn't work I brought it to a 2009 MacBook Pro, and that one connected no problem ::shaking head::

  • Mighty mouse usb and wireless issues with OSX 10.6.1

    Since upgrading to OSX 10.6.1 I have experienced intermittent mighty mouse issues with both the USB and wireless mouse. Essentially the mouse works as a pointer. However, I cannot select anything or use the mouse buttons. I need to re-start the machine in order to get it to work properly again. Anyone else had this issue or have suggestions for fixing it?

    Pushing the power button briefly on my iMac turns off the display and stops the hard drive running (both my internal and external drive). Pushing it briefly again brings everything back up in about 2 seconds - it's not a full startup. That's why I call it "sleep" - cause that's what it seems to be doing.

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • Strange issue with USB mouse and USB headset.

    Good day everyone.
    I was experiencing a rather strange issue with my mouse and headset(both USB).
    I am using KDE and ALSA, if that matters.
    They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
    Anybody ever had that problem?

    I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
    https://bbs.archlinux.org/viewtopic.php?id=122475
    Does my old thread sound like your issue somewhat?
    Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
    What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

  • Does IceMat work with Mighty Mouse Wireless?

    I am looking for the perfect mousepad. I am tired of the tiny and flimsy mousepads that move all over the place.
    After looking around I found the IceMat. It looks pretty nice and seems like it might be a very good mousepad (It better for $30+).
    Has anyone used the IceMat with the Mighty Mouse (Wireless)? If so, how was it? Has anyone used the IceMat at all? What do you think?
    Any other suggestions for the perfect mousepad?
    IceMat Manufacturer site:
    http://www.icemat.com/
    IceMat on Amazon
    http://www.amazon.com/Icemat-10012-2nd-Edition-Blue/dp/B000BCZ8Q8

    I used IceMat before and I won't suggest it for any mouse from apple.
    If you really want a nice mousepad, go for FUNC1030. I am using it
    with apple mighty mouse and they work pretty well together.
    You can find more information about it on www.func.net
    The reason I don't suggest IceMat is that if you read the description from its website carefully, you should notice it's made of glass. It will kill your mouse very fast. That's why they also sell Icemat Padsurfers to protect your mouse. However, none of them work with mighty mouse. Also, for a mousepad which has a hard material surface, you need to clean it very often. At least once a week or might be more often.

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Issues with Bex query structures and Crystal Reports/Webi

    Hi experts,
    I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
    Budget $
    Budget %
    Actual $
    Actual %
    Budget YTD
    etc
    if I drag the structure into the Crystal Report detail section with a key figure it displays like this
    Budget $     <null>
    Budget %     <null>
    Actual $     300
    Actual %     85
    Budget YTD     250
    the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
    Actual $     300
    Actual %     85
    Budget YTD     250
    Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
    Business Objects Edge 3.1 SP2
    SAP Int Kit SP2
    OS: Linux
    BW 701 Level 6
    Crystal Reports 2008 V1
    Thanks
    Keith

    Hi,
    Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
    ingo

  • HT1349 Has anyone had issues with the iphone 4s and facebook.

    Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

    @razmee: rather unhelpful.
    @tata - we're having the same trouble, and the only solution we've found doesn't fix it.
    1) uninstall
    2) login on PC/MAC and change password
    3) reboot iphone
    4) install facebook app, reboot again
    5) login from iphone. 
    No joy.
    Safari works, but not for the apps.
    Of course, it's Facebook that has to fix this.

  • My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

    My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

    You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
    Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
    http://www.f-secure.com/weblog/archives/00002300.html
    (I have ClamXav set to scan incoming emails, but nothing else.)

Maybe you are looking for