AVS 3120 not resolving hostnames without domain name

Dear friends,
Why could be this happenning? My domain name servers are configured inside the box and are up and functional. Inside AVS, I can ping to "server.domain.com", but when I ping only to "server", the answer I get is "unknown host: server". What shall be done to solve this?
Cheers!

This can be caused by wrong mapping which can lead to wrong destination or incorrect VIP which having a set of url policies that are misdirecting

Similar Messages

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

Exchange 2013 wildcard certificate - problem IMAP POP Because the matter is not a fully qualified domain name

Hi all, I have an Exchange 2013 SP1, I have installed a third-party SSL certificate and correctly on the server, but when I assign the POP and IMAP services, I see this error
The certificate with thumbprint XXXXXXXXX and subject '*. Xxxx.yyy' can not be used for POP SSL / TLS connections because the matter is not a fully qualified domain name (FQDN). Use the Set-POPSettings X509CertificateName command to set the FQDN of the service.
I tried to run this command and restart the POP and IMAP services
ImapSettings set-ca-server-1-X509CertificateName mail.xxxxx.yyy
POPSettings set-ca-server-1-X509CertificateName mail.xxxxx.yyy
But the POP and IMAP services, the certificate is not assigned.
You know as you can solve
regards
Microsoft Certified IT Professional Server Administrator

Hi,
Before we go further, I’d like to confirm if you can use POP and IMAP properly.
If everything goes well, we can safely ignore it:
http://www.hsuconsulting.com/wildcard-ssl-certificate-exchange-2013-imap-and-pop-error/
If not, we can try the following commands :
Set-POPSettings -ExternalConnectionSetting {mail.domain.com:995:SSL}
Set-ImapSettings -ExternalConnectionSetting {mail.domain.com:993:SSL}
http://careexchange.in/how-to-enable-and-configure-pop-imap-in-exchange-2013/
Note: Microsoft is providing the above information as convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

In address bar ip is resolving intead of domain name

Hi,
We have web chaining configured in TMG for the clients to access internet. The websites are resolving perfectly when Proxy IP is configured in IE on client system.
When we are testing internet access without proxy in IE, the websites are resolving to IP address instead of domain name.
Is there any settings/configuration to be done in TMG to fix this?

This is by design.
If you use TMG as a Proxy Server, the TMG will do the request on be-half of the client, whicn includes resolving the hostname and URL filtering can be applied. If your cient does not use the TMG as a Proxy Server and will only pass-through the TMG as a gateway,
the client will do DNS request themselves. TMG will only see a source and destination IP Address. The following applies:
If you use a Proxy Server you are connected as a Web Proxy Client. URL filtering is applied properly.
If you do not use a Proxy Server and pass-through the Proxy Server within a hop, you are connected as an SecureNAT Client. URL filtering cannot be applied to a SecureNAT Client.
The only way to force URL filtering, is by using a Proxy Server and require authentication. Only a Web Proxy Client can authenticate, a SecureNAT Client cannot authenticate and will be blocked.
I hope this makes more sense.
Boudewijn Plomp | BPMi Infrastructure & Security
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember, if you see a post that helped you please click "Vote as Helpful", and if it answered your question, please click "Mark as Answer".

What is the point in this "BScatalyst" if can not use your own domain name?!

the marketing of adobe BScatalyst is a enigma for me. What is it? when you can´t use your domain name?!

I think you need to do a lot of research and a lot of reading.
The point is: adobe has NOTHING TO OFFER besides the software (muse) for
developing a site.
Sorry to repeat this a lot but your not correct here as well.
Muse came recently and is a simple tool to help get people into making sites from the graphics and design industry basically. BC Has a full template, layout and code system:
http://docs.businesscatalyst.com/dev-assets/reference#!/module-reference/photo-galleries/m odule_photogallery.html
It has API Access, it can be developed using any coding software from Dreamweaver to Coda 2. This for many is the primary method of creating BC websites and has been for years, even before Adobe purchased the BC company.
It is always being updated as you can see with the new rendering engine and liquid markup:
http://www.businesscatalyst.com/bc-blog
The point is the CC atracts amatures, like my self, to devope sites, but
they have NOTHING to offer on the hosting side of the work.
Sorry, but none of this is correct. CC is a service created by Adobe to take all its software into the cloud, it is not just there to develop sites. In terms of storing your work in the cloud that is one of its primary functions. Ignoring BC and websites you can store your files, PSD's through your Creative Cloud account.
Your post was put under moderation automatically by the forum software because how you posted it. The caps will do it.
everything above here are without ANY interest for the common amateur muse developer. Why do you think we use muse?!
I communicate, I read and know a lot of Muse developers, Again your not correct here as well. Sorry for repeating this but this again simply not true and pretty much everything you have said so far is that.
A lot of Muse users develop very nice looking but basic in function websites, there are a lot who would like to do more such as eCommerce etc, you are not the norm in your thinking off what everything is from CC, BC and the web.
CMS me here, SAAS me there, and business analysis me over again. IT IS OF NO INTEREST FOR US MILLIONS OF MUSE USERS!
Again, this is not true. Most of the posts I see from Muse users is how they do more with BC and many want and ask how to upgrade their CC BC to offer more features. The Creative Cloud version of BC is the VERY BASIC version of it, it does not have most of the abilities it has if you have one of the higher plans.
See here:
US Yearly Pricing | Adobe Business Catalyst
A complementary product to Muse is HOSTING!
Creative Cloud is Adobe moving into the Cloud space for their products and services, Muse is an entry level designer based peace of software to create basic websites. Business Catalayst is what you do not want to research into and hosting is just storage basically.
Adobe Business Catalyst
In terms of your website, people make sites just for family etc and put them on the web, Real domain or not you can build a site for what ever you want. But its a website and will be out there on the web. Search engines like google will index such sites so if you do not want them out there on the internet do not create them to make them available.
I do not mean to be rude, but your comments are not valid and going no where. You not really understanding what anything is, your complaining about things are not true or things that you think do not exist when they do.
I have been developing sites on the Business Catalyst platform for over 5 years and using other coding platforms and other CMS's for longer then that. I am considered one of the people outside BC who know the platform for the most so please trust in what I am saying here.
If you want just hosting just use Creative Cloud or something like dropbox.
If you want to learn more about the web or building sites etc I suggest you go lean, there are many great resources out there.

Need to set hostname and domain name

Hi All,
I need to
1) set my "hostname" (foo), and
2) set my "domain name" (acme.local)
such that my machine identifies itself as "foo.acme.local". Anyone know how to do this? (I found the host name in file sharing, but it will not let me set the domain name.)
Many thanks,
-T

etresoft wrote:
Your domain is the name of your server.
What gave you that idea? My domain name is "acme.local". It is not the name of my server. I have three servers on my network. The one with the DNS, DHCP, and firewall servers on it called "server.acme.local".
I am confused about why you feel the need to have a subdomain.
This is not a subdomain. What gave you the impression I was asking for a subdomain?
What you seek to accomplish is entirely unnecessary and far more involved than just editing a config file.
Pretty easy in Linux and Windows. They just grab the domain name from the DHCP server. Or, you can hand configure them if you wish. Do you know how accomplish same in 10.6.4?
Give your machine a name in System Preferences > Sharing and it will have the name "whatever.local". That is all you need.
I would like to the entire network name displayed correctly. "whatever.local" is incorrect. It should be "machinename.domainname" or "foo.acme.local". In my example, "foo" is the machine name ("whatever" in your example) and "acme.local" is the domain name. (Not the server's name, by the way.)
"System Preferences > Sharing" will not let me add any extra periods. And will not let me change the ".local" either. (In this instance, I want the ".local".)
Here is the reverse rule I had to hand create:
182 PTR foo.acme.local.
(The dot on the end is not a mistake.)
I do not want a stray computer floating around that does not identify itself correctly. "foo.acme.local" is correct. "foo.local" is not.
By the way, this computer gets its IP address from a DHCP server, which does tell this Apple what the domain name is. (It gets ignored.)
/etc/dhcpd.conf
option domain-name "acme.local";
That is the config file for your DHCP server. You would use this if your machine were sharing its internet connection, for example. You don't need to edit this file.
You misunderstand. The DHCP server, not on this Mac, is not being used to share Internet connections. It is being used to assign IP addresses to machines on the local network. It is also being used to assign fixed IP's to network printers based on their MAC addresses. In my network, these are "off Internet" addresses. The firewall, also not on this Mac, it used to share a single Internet connection with all the internal users.
Hmmm. I created the file (dhcpd.conf) by hand. And, yes I do need to edit it all the time. Especially when I have bone headed machines on my network that do not follow or respond to standard networking conventions. This Mac does not accept the domain name given to it by my DHCP server and as such my DHCP server will not automatically update my DNS tables.
Evidence of this can be found in the dhcpd.leases, where I had to hand enter
client-hostname "foo";
into the lease table (did not do me any good).
I am wondering if 10.6.4 is not capable of handling this kind of standard network naming convention. (FreeBSD, which Apple run on top, is capable, so I am confused.)
MacOS X does not run on top of FreeBSD. They are different operating systems. MacOS X has a POSIX layer which most closely resembles BSD, that is all.
Interesting. Thank you for pointing out the difference. I bet POSIX know how, just like FreeBSD, which it resembles.
If I change the name in /etc/hosts, will Apple over ride it? (I am not at the machine or I would just try it.)
You do not "change" the name in /etc/hosts. You are just adding entries into your machine's lookup table. You can add as many aliases to as many IP addresses as you want. This is not the same as changing your machine's name, but it may be sufficient for what you are trying to accomplish - assuming I knew that, which I don't.
Then, where do I make the change?
10.6.4 did not tell the DHCP server what its name was either, so I had to hand add it into my DNS forward and reverse records. AAAAHHHHH!!!!
I strongly advise against editing files you don't understand.
I create my entire DNS configuration by hand, including my forward and reverse tables. Oh yes, I understand it, do I ever understand it. You should not jump to conclusions: it is insulting. I am presuming you meant no insult. Just be more careful next time.
I think that what is happening here is that 10.6.4 is not set up to follow standard network naming conventions. I would posit that the idea is to keep home users out of trouble. Probably a good thing. If 10.6.4 is not capable of using standard naming conventions, (or following standard DHCP conventions), I would just like a confirmation of that so I will stop trying to figure out how to do it. And, stop wasting my time and just hand configure any additional Mac's that enter my network.
Again, a "confirmation that it can not be done", or "how to do it" is what I am looking for.
Thank you for the assistance,
-T

How to deny other hostname or domain name pointing to same IP address in MySQL

Im using Cento 6.5
and
MySQL version 5.6.25
For example:
IP address:
192.168.1.250
this IP has 2 domain name
1. db.mysqldatabase.com
2. web.mysite.com
i want to block or deny the 2nd domain name in database hostname
if i update our Mysql Connection should be like this
$connection=mysql_connect("db.mysqldatabase.php","userdemo","demo");
$db=mysql_select_db("db_demo",$connection);
?>
But if i use also web.mysite.com i still connected i want to use web.mysite.com as my url website
and db.mysqldatabase.com as my database connection.
is it possible?
Thanks
This topic first appeared in the Spiceworks Community

Hi Linda, are you referring to the Domain Name showing in the Connectivity Tab of the Linksyssmartwifi utility? The Domain Name is automatically assigned by Comcast. This setting will depend on the type of internet connection that is set up for you by your ISP. Can you give me more details of your Internet connection set up? I'd like to see how it goes. Did Comcast provide you a new Domain Name?

LMS 4.2 discovery does not resolve hostname

Hi,
I'm trying automatic discovery with Ping on sweep module. I'm using the following configuration (you can also see it in the attached file):
discovery module - ping on sweep
global seed device - 192.168.6.35
preferred DCR display name - DNS resolvable hostname
The LMS server has its hostfile populated with the device ip/hostname that i'm testing with and resolving from the server works in both directions. Nevertheless, after discovery proccess is finished, the device is added in DCR with its IP address as dispaly name (screenshot in the attached file).
I've tried the same method in CiscoWorks 4.0.1 and it works fine.
I'm attaching the debug log files from discovery test. The LMS is running on Windows Server 2008 standard
Please advice,

Hi,
I'm trying automatic discovery with Ping on sweep module. I'm using the following configuration (you can also see it in the attached file):
discovery module - ping on sweep
global seed device - 192.168.6.35
preferred DCR display name - DNS resolvable hostname
The LMS server has its hostfile populated with the device ip/hostname that i'm testing with and resolving from the server works in both directions. Nevertheless, after discovery proccess is finished, the device is added in DCR with its IP address as dispaly name (screenshot in the attached file).
I've tried the same method in CiscoWorks 4.0.1 and it works fine.
I'm attaching the debug log files from discovery test. The LMS is running on Windows Server 2008 standard
Please advice,

How a router can resolve dns without ip name-server command?

Hello everyone,
A question about the command "ip name-server *.*.*.*"
If I didn't put in the DNS server, the router can still resolve the domain name. You can see the domain server is 255.255.255.255.
Why does this happens?
R4#ping www.cisco.com
Translating "www.cisco.com"...domain server (255.255.255.255) [OK]
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 184.31.192.170, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
R4#

Hi,
There is a name server inside the LAN. Before searhing in the DNS server, it checks the name server in the LAN to reduce the time for searching. The name server of the LAN is like a cache which stores the results coming from the DNS server.
So, it is name server of the LAN which is resolving the IP address.
Thank you.
* please rate the helpful posts.

Azure AD user name not using configured custom domain name

I have configured a few users for Lync Online that I setup before I had custom domain name work with Azure AD. Now I have the custom domain setup and verified and configured as the primary domain. The users that were configured for Lync
Online are still displayed with the *.onmicrosoft.com username in Azure AD.
Is there a way I can change these users so their usernames use our custom domain?

You can easily change the UPN via PowerShell:
Set-MsolUserPrincipalName -UserPrincipalName [email protected] -NewUserPrincipalName [email protected]
If you want to do this in bulk for all users, you can use something like this:
$all = Get-MsolUser -All
$users = $all | ? {$_.UserPrincipalName -match "tenant.onmicrosoft.com"}
$users | % {Set-MsolUserPrincipalName -UserPrincipalName $_.UserPrincipalName -NewUserPrincipalName $_.UserPrincipalName.Replace("tenant.onmicrosoft.com","domain.com")}
Test it first against a single user of course :)

LMS 4.2.2 Fault manager does not resolve hostname for some devices

This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server.
The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.

The problem may occur if the lookup was not possible when the device was added to fault management.
Faultmanager, unlike the rest of LMS, does not update the display name.
If the resolver.pl in /opt/CSCOpx/bin is able to get the device name, then resolution is fine.
The only workarrounds are to the delete the device from LMS and re-add it, or use cli tools on the server to remove and re-add the device from the DFM repository.
Cheers,
Michel

Muse is not publishing to my domain name, instead its publishing to business catalyst

I have several sites that are up and running a long time now with no trouble. Today i had to sign into muse and it said my trial had begun.
I signed out and back in again and now it will only let me publish to a businesscatalyst temp site
Eugene

I deactivated muse and reactivated and although i have right Adobe id and password its offering me a free trial of Muse

Getting old site off the 'net without appropriate files. (to start over with same domain name)

As a complete novice, I'm not even sure how to start this question...but, I have tried everything and I think I have "lost" my website in terms of bringing in back into DW and changing/updating it. My backup files on my computer have disappeared and the appropriate files through my cPanel to bring it back to in order make changes aren't there. The website still functions, but it is outdated for my business needs.
So, at this point, my question is this; how can I gain control over the domain and start over from scratch. I don't want what is out there anymore, but without control through the above mentioned devices, is it even possible to build a new website and get the old one off the 'net as it is and still keep the original www.name.com?
I'm clueless at this point. Thanks.

Chazmonk wrote:
So, at this point, I don't know what is really going on. My main goal was to get my existing website off the net and put something updated on with the same domain name. I was successful with what JTANNA suggested, but I don't know what I'm doing with a mirrored site in terms of what my needs are. I am not against changing the domain name and just leaving this one out there, though I did put a great deal of time into building it. I would take some further help if anyone has more suggestions, but I'm about ready to move one.
Thanks for trying to help.
You will need to sort out the FTP issues because when you have edited your site, you will need to upload it and so FTP details will be required.
Your first port-of-call to sort this out is to contact your host who can reset the password for you so that you can start all over again. The alternative, is to give your password/login details to Murray (PRIVATELY) so that he can try from his machine. When this is done, you can always change the password for your own security.
hth

Can´t resolve domain names in the intranet

I am unable to see a site in my workplace's intranet because safari (and explorer) are unable to resolve the server domain name (//dbs01/login.asp/) and the most frustrating part is that the lamest PC connected to it can. I worked it around changing the dbs01 part for the ip number of the server (192.168.100.1xx) and was able to login to the site but as I click on any link my problem starts again because the javascript instructions redirect the browser to pages using the name "dbs01". How can I make it work?
This happens with airport as well as ethernet connection to the intranet
MacBook Pro Mac OS X (10.4.7)

Updated info: I realized today, after doing some more digging, that when the Cisco Windows client is installed, it basically creates a new network adapter. When I go to that network adapter, and check the properties for TCP/IP, there are entries under DNS for my county's DNS server. So when I am connected with Cisco VPN using Parallels, I can access the internet no problem because the vpn client has DNS entries. But when I connect using the Mac version of Cisco, on the same laptop, while in Mac OS X, I can't go to an internet site unless I manually enter the IP address. So, I'm still needing help here. Is it a setting my county needs to change on the Cisco switch? They had mentioned to me that when connected with VPN, all regular internet traffic is routed through one's ISP. But that doesn't seem to be the case here...

AVS 3120 not resolving hostnames without domain name

Similar Messages

Maybe you are looking for