AVTransmit2 & AVReceive2 Not working on same PC

hi
i get a problem ,i program on AudioCoference + java
When i use the same port number in both AudioTransmit &
AudioReceive class then a got a problem
After running the AudioReceive class i got a Error mesage
for using the same port
How can i solve the problem Please help anyone <[email protected]>
Message was edited by:
Amit.v

Did it do a system update for the Touch aswell? It did for me when I selected to Restore. Did you enter the password for your network? If none of this is working, I suggest you go to your nearest Apple Store and let them look at it. They can confirm if its faulty or not

Similar Messages

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

[svn] 3913: BLZ-272 Two long polling endpoints not working in same app with Firefox

Revision: 3913
Author: [email protected]
Date: 2008-10-27 13:49:02 -0700 (Mon, 27 Oct 2008)
Log Message:
BLZ-272 Two long polling endpoints not working in same app with Firefox
The long polling waitMonitor object in the FlexSession did not keep track of
blocking polls via endpoint ID. This prevented the second channel from blocking.
Enhance the FlexSession.waitMonitor to be a map of endpointID to
EndpointQueue objects, and keep track of the monitors based on what endpoint
they are associated with.
QA: Yes
Doc:No
Checkintests: passed
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-272
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/FlexSession.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/client/FlexClient.java

Revision: 3913
Author: [email protected]
Date: 2008-10-27 13:49:02 -0700 (Mon, 27 Oct 2008)
Log Message:
BLZ-272 Two long polling endpoints not working in same app with Firefox
The long polling waitMonitor object in the FlexSession did not keep track of
blocking polls via endpoint ID. This prevented the second channel from blocking.
Enhance the FlexSession.waitMonitor to be a map of endpointID to
EndpointQueue objects, and keep track of the monitors based on what endpoint
they are associated with.
QA: Yes
Doc:No
Checkintests: passed
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-272
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/FlexSession.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/client/FlexClient.java

Oracle Forms 10G(tabbed canvasses not working the same as in Forms 6i)

Hi everyone,
I have a form which gets called from another form through a list of value. The called form(second form) has a group of tabbed canvases which get displayed depending on the parameters passed from the first form.
The Form is working prefectly fine in Forms 6i but when I converted the same form in to forms 10G it does not seem to work the same way. The tabbed canvasses are not getting displayed. I am manually having to press the execute query to get data displayed in the tabbed canvasses. I checked the parameters that are being passed and they are the same as that in Forms 6i.
Please let me know where my 10G Form is going wrong. Appreciate your help, please send me an email on [email protected]
Thanks

duplicate
Re: Oracle Forms 10G not working as Oracle Forms 6i

Deskewing not working the same in version XI as it did in version 10

We have been having issues with Adobe XI and the de-skew feature. In version 10 we could take a previously scanned PDF and go in to Tools > Documnet Processomg >Optimize Scanned PDF > make the needed changes to the Filters (Deskew:On, Background removal: Medium, Descreen: On, Text Sharpening: On) , Edit the OCR PDF output Style to "Searchable Image" and then run the optimization. This would apply the filters and deskew the document both in the same step. However, since version XI when we do the same thing, with the same files it will apply the filters but it will not deskew them (we have tried multiple files and multiple systems to rule out file issues and install issues). The only way that we can get it to deskew it is to set the OCR PDF output to "Clearscan". This would be fine except for the fact that the the clearscan setting does not apply the filters. So...the only way we can get this to do what we need is to run the optimization once with the OCR PDF set to "Searchable Image" to apply the filters and then run it again with the OCR PDF output set to "clearscan" to deskew the document. This is not a big deal with a single page document but becomes a larger time issue when dealing with large, multipage documents. It appears that this is a "bug" in version XI. Any suggestions on how to accomplish in version XI what we used to be able to do easily in Version X.
Additional information: We are running Adobe 11.0.01 on Windows 7 64 bit OS.
I have also seen LoriAUC's last post on http://forums.adobe.com/thread/992172 but those settings did not work for us either.
Thanks in advance for any assistance.

OK Adobe needs to hire people who can read *and* comprehend words.
The Issue is WITH Acrobat 11
I am having the same problem - deskew does not work on Acrobat 11 on Windows 7 64 bit.
The advice: "For the time being, please use Acrobat 11 as this issue does not exists in Acrobat 11." is inaccurate.

Sound and Vibrate does not work at same time

Hi Support,
I have recently purchased BlackBerry Z3.
It does not support Sound & Vibrate at same time.
In Normal mode, I have enabled Sound and Vibrate but it does only give sound for incoming calls/messages.
(does not vibrate)
In Vibrate Mode, it does only vibrate.
This is the first time I am using Blackberry and I am annoyed with the basic feature not working.
Please respond.
Regards,
Sunil.
Solved!
Go to Solution.

I'm glad things are back to normal for you.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

LENOVO Z51 MOUSE AND KEYBOARD NOT WORKING AT SAME TIME

I know this question has been asked before, but those solutions do not work for me. I just got my new Lenovo z51 80k60030us and I quickly put a game on it just to test out the waters. ran well. However, I can't move (use the keyboard) and look around (use the mouse) at the same time. I looked all over the internet and understood that it has something to do with "palm tracking" however no one had the solution for my specific mouse/keyboard issue. when I try and change the options under the lenovo mouse, it is grayed out. I tried everything to ungray it, but I have yet to succeed. help please??

ColonelONeill wrote:
Try using a newer generic Synaptics driver?
http://www.station-drivers.com/index.php?option=com_remository&Itemid=352&func=fileinfo&id=1602Thank you very much! I was looking for a generic Synaptics driver, but there website didn't even have one for windows 10... Again, thank you very much.

Mail Signatures, Folder Organization, Notification and Attachments not working the same since upgrade to Mavericks

Hi All,
Normally very quick to do so, I’ve been hesitant to upgrade to Mavericks based on so many issues being reported with Mail + Gmail.
Previously Apple released a fix for these issues and I still waited a while. This weekend I upgraded to Mavericks and Mail is definitely not working as I’d expect it.
Some of the things I notice include:
1) My saved mail folders, previously in alphabetical order, are now in reverse alphabetical order and dragging them to be in a different order has no effect
2) Previously when I clicked on a message and pressed Message > Remove Attachments the message would reappear in my inbox within a second or two, without the attachment. Now, the message simply disappears.
3) The little red icon no longer appears in the dock when a new message arrives
4) For my various accounts, signatures do not appear/disappear as I select a different From account (each of my accounts has different signatures).
Does anyone have thoughts on any of these items?
Thanks,

Not an answer, but a repeat ...
I too have problem (2) -- Remove Attachment now makes the email in question disappear (in fact moving it to Archive).
Help would be appreciated.
(Have just moved from Lion to Mavericks.)

Urgent - Things not working the same in server and local machine

Hi,
I have created an advanced table under advanced table as per the instructions in the dev guide. When the Add Row button is pressed in the parent table, I am inserting rows into the child VO and hence I should see rows in the child table in the UI. This is working fine in local machine. But when I deploy in the server it is not working. The child table is showing no search conducted. I have good OAF experience and have deployed things properly. But what could I be missing?

Hi Sumit,
"If the Child VO is not getting executed, please check the code which is responsible to execute the child VO. Do pay attention to exit clauses (like if conditions which skips a clause) and pay attention. "
- If those things were a problem, it wouldn't have run in the local machine also right? Also, I ran diagnostics on the server and I can see the child VO is having the rows. It is something to do with the association of the child with the parent. But again: it's working fine on the local. That's what is bothering me and that's why I need some expert help. If you want, I can send you the page, controller and the AM ( 3 files)
Of course redeploying the entire code, importing pages and bouncing is an option that could be explored.
- Done that multiple times with a lot of care. Cleared Cache etc etc.

I touch music shuffle not working. Same song plays over and over. How do I fix?

The shuffle for my iTouch is not working. It ontinues to play the asme song over and over. I have powered on and off many times as well as re-syncing the unit. I would try to take the battery out to reset but do not know how. What next?

Sounds like the Repeat option has been enabled. To disable it, tap the artwork of the currently playing track to bring up the additional controls. Under the scrubber bar on the left hand side is the repeat setting. Tap it until it turns white meaning that it is off.
B-rock

AVReceive2 and AVTransmit2 not work the same...HELP

I am using AVReceive2 and AVTranmit2 in a programs I am developing. I have run the two programs as the standalones they are and I get the video or audio I send across. But in my program when the program calls up the routines it launches and only does a hand full of what it should do. It is also like the SessionListener, ControllerListener, and ReceiveStreamListener are missing. The program listens for a RTP connection to come in but it never completes the action when I know that there is a connection being attemped. The same istrue for the AVTransmit2 it does not create the RTP session that I know is supposed to go out. It is like skipping a large piece of code. Even though they are all contained correctly. If someone can give me an answer to why these two programs work out side of what I am doing and why they are not in what I am building it would be highly appreciated. ASAP I need this working by tomorrow morning. Thanks
public CommPt(String rcvr,String sender,String rcvr2) {
        initComponents();
    //    System.out.println("start to receive signal");
   //     if (pick.equals("Receive")){
   //     at = new AVTransmit(new MediaLocator("vfw://0"),"192.168.1.101","22222",null,new MediaLocator("javasound://8000"));
   //             at.start();
   //     String argsv[]={"192.168.1.102/22222","192.168.1.102/22224"};
        avReceive = new AVReceive(rcvr);
        avReceive.start();
   /*     while((avReceive.getConnection()).equals("false")){//carlos
            System.out.println("2");//carlos
            if (!(avReceive.getConnection()).equals("failed")){//carlos
                System.out.println("3");//carlos
                avReceive =new AVReceive(rcvr2);//carlos
                avReceive.start();//carlos
                break;//carlos
            }//carlos
        }//carlos*/
      /* if (!avReceive.initialize()) {
         System.err.println("Failed to initialize the sessions.");
         System.exit(-1);
        // Check to see if AVReceive is done.
        try {
         while (!avReceive.isDone())
          Thread.sleep(1000);
     } catch (Exception e) {}
     System.err.println("Exiting AVReceive");*/
    //    if (pick.equals("Transmit")){
                Object stand=new Object();
             //   System.out.println("Start Time delay");
                try{
                    Thread.sleep(5000);
                catch(Exception ex){
                    System.err.println(ex);
             // System.out.println("time delay ended");
                String [] temp2;
                temp2=sender.split("\\ ");
                at = new AVTransmit(new MediaLocator(temp2[0]),temp2[1],temp2[2],null,new MediaLocator("javasound://8000"));
                at.start();
    }Edited by: Laughincrow on Nov 29, 2009 5:02 PM

Laughincrow wrote:
ASAP I need this working by tomorrow morning. ThanksI guess since it's tomrorow morning I shouldn't bother to comment on this thread...
P.S. If you don't want to take the time to remove your commented-out code that makes it nigh-on impossible to see what your code is actually doing, then why would anyone want to take the time to help you?

Adobe Air ServerSocket not Working the same on XP/Vista/7

I'm having a strange problems with an air socket server i've written.
I have an Air application written using Flash Builder 4. It's basically a simple HTTP server. It's purpose it to open a server on a specific port and serve files (both html and swf) out to a web browser.
When i run the air application on my desktop (windows 7, firefox 4.0b11, ie8, flash builder 4 compiled with flex sck 4.1.0) everything works correctly. Whether i run the server through the Flash Builder debugger or actually do the full packaging and install as a standalone air app then run it using the Air Runtime like any user would. I load up the server, punch in the address from anywhere and the page loads, and the requested swf displays correctly. While the server is running on my desktop i've tested clients including Windows XP and Vista with IE8, HTC Evo4g Android phone, and the Playstation 3 browser. From any tested client with the server running on my desktop all requests are handled correctly and pages/swfs load and display correctly.
The problem comes when i run the air app on another computer. When i package it and install it on one of my two test systems (Windows XP and Windows Vista) things start to go wonky. The Air app loads on the two test systems but when a client tries to use their web browser to request a page things don't display correctly. The client can load the html file fine but the swf that it receives from the server does not display. I can check the log on the status server and see the HTTP GET being processed, and the file sent. However, the browser simply displays a blank box where the SWF should be. With the server running on either of my two test boxes (XP and Vista) the same clients who can connect and display html and swf's delivered from the server experience this problem.
I think i've eliminated browser request as the problem from testing different browsers on different OS's on each of the test installations. As best I can tell, the problem is with the server side of the app. The server uses the SocketServer class to listen for a connection and then writes out the HTML headers and content to the socket manually, i'm not using any external libraries for writing to the socket.
here's the code for writing to the socket when a swf is requested.
     var content:ByteArray = new ByteArray();
     var stream:FileStream = new FileStream();
     stream.open(file, FileMode.READ);
     stream.readBytes(content);
     stream.close();
     socket.writeUTFBytes("HTTP/1.1 200 OK\n");
     socket.writeUTFBytes("Content-Type: application/x-shockwave-flash\r\n");
     socket.writeUTFBytes("Content-Length: " + content.length + "\r\n\r\n");
     socket.writeBytes(content);
I don't believe the problem is with the socket write since it works on my desktop but not when the server is running on another. I'm wondering if the problem is with an external system dependancy. Are there any external libraries, visual c++ runtimes, tcp/ip libraries that Air uses to fulfil requests to sockets on different operating systems/versions? I've been searching around the web and browsing through adobe live docs for a few hours on this but can't seem to find a resolution anywhere. If more detail is needed, please let me know. Any help would be much appreciated.

I appreciate you taking the time to look at this. Good to know I'm not completely crazy, that makes me feel a little better.
The 178774 is bytesLoaded()   and 1096810 is bytesTotal() as seen by the swf.
That's what i was experiencing. The issue you're seeing with it running on vista of the swf apparently only loading 180k of the 1 meg is what i'm experiencing. For me that happens when the server side of things is running on my XP or Vista machine. On Win 7 it works fine. Also, for mp3's it seems to only download the first couple seconds. When i stream an mp3 from the server it only plays a couple of seconds and stops.
Not sure if the index.html file that it serves out is small enough that it gets it in one cycle but for larger files it closes out the socket before sending all the data.
If i get some free time tomorrow i'll see about getting an Ubuntu virtual machine going and test it there as well. I don't have access to a mac to try it on OSX.

Camera connection kit not working the same on IOS 5 as it did on IOS 4. Bugs or deliberate features?

Using the Camera connection kit Previously downloaded files were recognised and only new pictures were uploaded. Doesn't seem to work in IOS 5. I was using the Ipad as a photos backup and display device.

I haven't had an issue. Do you use the same card on both devices and it works differently on each one?
You might try resetting the one that isn't working. Hold down the sleep and home key, past the red power down slider and until you see the silver apple. Let it reboot and see if it works.
Might, might not help it, but it's a common fix for glitches.

Internal network not working the same as on previo...

Hi all,
I had the previous HH3 when I had standard BT Broadband, with this I was able to browse to webcam.home for example.
Since my upgrade to Infinity I now have the new HH3 installed (Software version V100R001C01B031SP09_L_B), no matter what I do I can no long browse using the name. If I look at the details in Home Hub manager UI then I can find the IP address of the camera and browse to it, this works fine. It doesn't look like the new hub is handling the internal network in the same way.
I am using DHCP for all the connected devices.
Any ideas would be greatly appriciated as i don't want to have to remember all the IP addresses of my networked devices.
Thanks in advance,
Steven

Hi svacher
If you logon to the HH3, under the Home tab, what is listed under "Devices currently connected to your BT homehub".
You should see your camera there and it's hostname. If you only see the ip address then the hostname has not been resolved. That could be that the camera has not "registered" it's name with the HH3.
Not sure if you are using your browser from Windows, but you could try opening up a command prompt and running this command. It will flush any old DNS entries and should allow you to use the hostname.
ipconfig /flushdns
ptan

Class.newInstance() does not work the same way in Java 5.0

We upgraded our development environment to RAD 7, and I am experiencing an interesting problem with the code below which worked perfectly with the previous version.
Class cloneClass = fromObject.getClass();
Object toObject = null;
toObject = cloneClass.newInstance();
I am using an open source hashtable called OrderedHashtable that uses the key-value lookup capabilities of a hashtable and order preserving capablities of a vector. It stores the objects in a hashtable and stores the keys in a vector.
fromObject in the code above is a key (String) that I retrieve from the OrderedHashtable and clone it using the code above. But with java 1.5 , the cloneClass.newInstance of this String object returns an empty string.
I guess there is a work around where I can check if the cloneClass is an Instance of String and just do fromObject.toString(), but I was curious to know if there was a change in the way class.newInstance() works in Java 1.5

>
fromObject in the code above is a key (String) that I retrieve from the OrderedHashtable and clone it using the code above.No. How could that code possibly clone a String? Where are you telling it what the new String's contents should be?
(HINT: Nowhere.)
I guess there is a work around where I can check if the cloneClass is an Instance of String and just do fromObject.toString(), but I was curious to know if there was a change in the way class.newInstance() works in Java 1.5No, it has not changed.

AVTransmit2 & AVReceive2 Not working on same PC

Similar Messages

Maybe you are looking for