AW and LMS
The situation:
We created a course that consists of three modules for
running at a
LMS(Moodle). These modules are hierarchical. The learner
begins with modules
1. At a certain point he can switch to modules 2 and then to
module 3. The
same back. The modules are AW-pieces.
The problems:
It is not possible to launch module 2 direct from module1 (by
the function
GoToNetPage), because the first golden rule of scorm is: A
SCO may not
itself launch other SCOs. But how I tell the LMS: Now (when
the learner
pushed a button within the module 1) starting module 2?
When package the modules with One Button publishing, create
the package with
the Authorware Learning Object Content Packager and the
matadata file with
Authorware Learning Object Metadata Editor I get all the
necessary files
separate for every module. But how I get the information for
the LMS that
these modules are part of one course? I guess that the
"Groups" in the
Authorware Learning Object Metadata Editor have something to
do with that,
but how is it to use?
Thank you for every help.
Frieder
right.
F. Scheffel wrote:
> No, I cant expect from the learner that he jumps from
module to module and
> back. When there is no solution to lauch the modules by
LMS I must make one
> SCO from three.
>
> "Mark Tomlinson" <mark.tomlinson@.> schrieb im
Newsbeitrag
> news:[email protected]...
>> Then live with the 3 SCO 'issue'
>>
>> F. Scheffel wrote:
>>> Means that we have jumbo-SCOs. Very hard to
handle while authoring.
>>> "Mark Tomlinson" <mark.tomlinson@.>
schrieb im Newsbeitrag
>>> news:[email protected]...
>>>> Or make them all one SCO?
>>>>
>>>> F. Scheffel wrote:
>>>>> But means this is it impossible to lauch
the module 2 from within
> module
>>> 1?
>>>>> The learner must stop module 1 and start
module 2 with the
> LMS-buttons?
>>>>> "Amy Blankenship *AdobeCommunityExpert*"
>>> <[email protected]>
>>>>> schrieb im Newsbeitrag
news:[email protected]...
>>>>>> "F. Scheffel"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>> The situation:
>>>>>>>
>>>>>>> We created a course that
consists of three modules for running at a
>>>>>>> LMS(Moodle). These modules are
hierarchical. The learner begins with
>>>>>>> modules
>>>>>>> 1. At a certain point he can
switch to modules 2 and then to module
> 3.
>>>>> The
>>>>>>> same back. The modules are
AW-pieces.
>>>>>>>
>>>>>>> The problems:
>>>>>>>
>>>>>>> It is not possible to launch
module 2 direct from module1 (by the
>>>>> function
>>>>>>> GoToNetPage), because the first
golden rule of scorm is: A SCO may
> not
>>>>>>> itself launch other SCOs. But
how I tell the LMS: Now (when the
>>> learner
>>>>>>> pushed a button within the
module 1) starting module 2?
>>>>>> That's the whole point. The learner
is supposed to return to the LMS
>>> when
>>>>>> traveling between SCO's.
>>>>>>
>>>>>> HTH;
>>>>>>
>>>>>> Amy
>>>>>>
>>>>>>
>>>> --
>>>>
>>>> Authorware Media Synchronization Command:
>>>>
>>>> www.authorwarextras.co.uk --> Commands
>>>>
>>>> Media Synchronization made easy !
>>>>
>>>> EuroTAAC eLearning 2007
>>>> www.eurotaac.com
>>>>
>>>> www.AuthorwareXtras.co.uk
>>>> www.freelists.org/list/flashelearning
>>>
>> --
>>
>> Authorware Media Synchronization Command:
>>
>> www.authorwarextras.co.uk --> Commands
>>
>> Media Synchronization made easy !
>>
>> EuroTAAC eLearning 2007
>> www.eurotaac.com
>>
>> www.AuthorwareXtras.co.uk
>> www.freelists.org/list/flashelearning
>
>
Authorware Media Synchronization Command:
www.authorwarextras.co.uk --> Commands
Media Synchronization made easy !
EuroTAAC eLearning 2007
www.eurotaac.com
www.AuthorwareXtras.co.uk
www.freelists.org/list/flashelearning
Similar Messages
-
WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade
Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
JelenaHello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl restoreDBTableMig.pl restoreJRMMig.pl restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
USER ID is ..................................... : sysadmin
OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
Generation to be restored is ................... : 0
Backup taken from............................... : /opt/BKP/
Common Services version in the backup data is... : 3.3.1
Common Services is installed in................. : /opt/CSCOpx
The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
WARNING: The list of applications installed on this CiscoWorks server does not match the list of
applications in the backup archive. If you restore data from this backup archive,it may
cause problems in the CiscoWorks applications.
Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
Available disk space in NMSROOT................. : 86451488 Kb
Required disk space in NMSROOT.................. : 35906524 Kb
(The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
Cross Platform Update started.
Cross Platform Update completed.
License check started.
WARNING: The license details in the server are different from the backup data.
After restoring, please check the license available in the server.
WARNING: Your current license count is lower than your earlier license count.
If you restore the data now, devices that exceed the current licence count
will be moved to Suspended state.
License check completed.
Restoring certificate.
WARNING: Cannot evaluate the hostname, hence the certificate
may be from this host or another host.
[ Certificate not overwritten ]
Restored Certificate.
Restoring Common Services database.
Restored Common Services database.
Restoring CMIC data.
Restored CMIC data.
Restoring CMC data.
Restored CMC data.
Restoring Security Settings.
Restored Security Settings.
Restoring DCR data.
Restored DCR data.
Restoring Certificate key store.
Restored Certificate key store.
Restoring DCNM CrossLaunch data.
Restored DCNM CrossLaunch function.
Restoring JAAS configuration.
Restored JAAS configuration.
JRM Job Migration started.
JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
10% of IPM Restore Completed
30% of IPM Restore Completed
50% of IPM Restore Completed
60% of IPM Restore Completed
70% of IPM Restore Completed
100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena -
Can VMS 2.1 and LMS 2.1 be installed in same server?
Dear all,
May I know can VMS 2.1 and LMS 2.1 be installed in same server? If so, how about the sequence of installation? If LMS 2.1 is already installed on the server, do I need to install the VMS Common Services? Thanks
GaryHi,
In VMS 2.1 bundle, RME and Security Monitoring Center are included. As I know, RME can receive syslog from switch/router/PIX and Security Monitoring Center can receive syslog from PIX. If I install these two applications on the same server, will there be problems about the syslog receive? Will the syslog messages mix-up? Thanks
Gary -
Prime Fulfillment 6 AND LMS 4.2 on single Solaris 10 server?
Is it possible to easily operate both Prime Fulfillment 6 AND LMS 4 on single Solaris 10 server?
They were not tested together, and I recommend they not be installed on the same zone instance (due to potential conflicts). Now, if you're certain you have a server that can accommodate both suites (in terms of resources), create separate zones for each suite. This will eliminate the conflict possibility while still giving you one overall physical machine to manage.
-
Hello,
A customer currently have 2,500 Cisco Prime Infrastructure Lifecycle device license using Prime Infrastructure version 1.2 and LMS 4.x. the customer wants to upgrade to Cisco Prime Infrastructure 2.0.
Does anyone know if it is possible to upgrade to version 2.0 without additional cost? the licenses from
Cisco Prime Infrastructure 1.2 has to be upgraded or we need only to rehost the VUDI.
Also could be possible to upgrade LMS 4.x to Cisco Prime Infrastructure 2.0?
thanks!The two features you mention are two big missing ones. Another is full syslog capability. I don't believe CiscoView or day one support via package updates is included either.
Another is less tangible - the depth of experience and documentation available for LMS vs. Prime Infrastructure (particularly the wired management features). I agree for wireless PI 2.0 looks good. Some new features are coming for wired that look promising but they are new as of PI 2.0 so I'm taking a wait and see on them.
I hope to get 2.0 up in my lab in the next week or so and will hope to be pleasantly surprised but that's seldom the case with a major new release. -
Issue with .flv Captivate and LMS
Hi, I am testing an LMS that we will be rolling out in the
New Year. We have produced some Captivate2 modules and have
successfully loaded them as SCORM2004 onto the LMS and they run
okay.
I tried creating a .flv using Studio8 and inserted it into a
Captivate 2. The module runs okay on my harddrive. I create the
manifest.xml file and zip all the content and upload onto the LMS.
The LMS will launch the file okay and it plays and stops at the
point where the flv should play - but it doesn't there is nothing
not even the small flv controls are displayed. If I click on the
forward button it advances to the next part of the Captivate as
normal.
Has anyone else experienced this and found a solution?
thanks
GerryI highly recommend you look at:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=470&threadid =1203710&highlight_key=y&keyword1=flv
This issue is one that is CAUSED by Adobe. The flvs work fine
on an Adobe server. They are trying to force people to use their
service.
It sucks, and I hope someone fixes it soon -- not being able
to play flv is ridiculous. -
Help--if I create an e-learning course with Adobe Presenter I have three output options for publishing.
Creation of a flash presentation via HTML (SWF)
Run it through Adobe Connect Pro
Publish to a PDF
Can any of these be supported through an LMS other than Connect Pro? I'm trying to tie a developed course to an LMS on a large scale such that multiple companies can register many employees and manage, track course completion, etc.
DanMy opinion is positive, depending on your needs. We use Presenter and Captivate for all of our courses. Presenter has ease of use going for it. If you can use PowerPoint, you can use Presenter. That can be good or bad. I believe Presenter is great for straight-forward, click-through courses. Quizzing is decent. It's not a robust, option-laden application.
Captivate is great for simulations and interactive learning. You can force the learner to participate.
I haven't used many others out there but Adobe has two winners in these products. -
Captivate and LMS JavaScript Problem
We use Captivate and a Plateau LMS. We had an issue with
bookmarking within our course. The first lesson worked just fine,
but later lessons were not bookmarking. We added javascript alerts
to the code to see when the Captivate content was setting LMS
variables.
We feared the issue was the bandwidth between the client and
the LMS was so limited that the script attempting to set the LMS
variables was failing, but this is not the case. The script appears
to not run at all sometimes at random intervals. When it does run
it is successful each time. The first lesson, which works reliably,
is much smaller than the other lessons, maybe the size of the SWF
factors into the ability for the script to run properly?
Has anyone else run across this issue? Does anyone have
advice in deeper troubleshooting an issue like this?
Any input is appreciated.
Thanks!
ChrisI think that CP3 sends back its data on a time basis, not a
slide
basis...like every 7 seconds or something?
We've had customers who are tracking interaction data in
their CP
quizzes which have like 40 questions. If they go through it
too quickly,
the timed 'save' to the LMS gets behind quickly...so by the
time the
user is done, only 2/3rds of the suspend data has been
saved...
And I imagine the bookmark could be left out entirely as
well.
So see if it's a timing thing? Go through slowly, see if
posting happens
on a timed basis...maybe that will help determine where the
issue is...
I do wonder how CP4 sends its data back...
Erik
chrishillman wrote:
> The script appears to not run at all sometimes at random
> intervals. When it does run it is successful each time.
The first lesson,
> which works reliably, is much smaller than the other
lessons, maybe the size of
> the SWF factors into the ability for the script to run
properly?
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips! -
Message types for SAP HR Personnel Development and LMS modules
Hi Friends,
I had a requirement to create ALE's for SAP HR LMS module and Personnel Development module.
So, what are the message types and IDoc s are availble. Earlier replies could be appreciated.
Thanks,
Pavan.Hi Nayani,
The Message type is HRMD_A for HCM to HCM with basic types HRMD_A01 to HRMD_A07(HRMD_A07 is the latest).
From HCM to Non Hr/CRM/SRM is HRMD_ABA.
Br/Manas -
Does anyone know if Captivate works with the LMS system Force
10?
Thanks,
JeffI think that CP3 sends back its data on a time basis, not a
slide
basis...like every 7 seconds or something?
We've had customers who are tracking interaction data in
their CP
quizzes which have like 40 questions. If they go through it
too quickly,
the timed 'save' to the LMS gets behind quickly...so by the
time the
user is done, only 2/3rds of the suspend data has been
saved...
And I imagine the bookmark could be left out entirely as
well.
So see if it's a timing thing? Go through slowly, see if
posting happens
on a timed basis...maybe that will help determine where the
issue is...
I do wonder how CP4 sends its data back...
Erik
chrishillman wrote:
> The script appears to not run at all sometimes at random
> intervals. When it does run it is successful each time.
The first lesson,
> which works reliably, is much smaller than the other
lessons, maybe the size of
> the SWF factors into the ability for the script to run
properly?
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips! -
Hello,
Ever since I begun creating projects from Captivate 5.5 and uploaded it in our LMS, I have observed this below image which briefly displays just before my project begins to play.
I hope someone could explain to me what does it actually do.
Projects were published as SCORM1.2 compliant and so far my projects are okay. Just needed some explainations on its existence.
BR
-MiguelThis image displays while your Captivate module is connecting to the LMS. You can configure the text that displays in this animation at that time via the field at Preferences > Quiz > Reporting > Enable Reporting > LMS Initialization Text.
It doesn't appear when you're not using a SCORM-compliant LMS. If the course module is having difficulty connecting to your LMS, this animation will be there for quite a while. Normally it will disappear within a second or two at most. -
Coursebuilder and LMS communication
A few postings appeared over the past year regarding running
web pages with Coursebuilder interactions and Knowledge Tracking
on, but encountering the dialog, "Tracking System Not Found". I get
the same dialog, too. I see no replies yet about this
train-stopping little dialog.
I'm only sending one HTM page to test it in my LMS system,
for which I created the Coursebuilder frameset.
Does anyone know what to do in the Action Manager, or in the
code on the page, to "talk" to an LMS? I have added JavaScripts to
send variable values and "Send Core Data" and other elements to the
Action Manager (which I verified are correct), but doubt if they
are being sent.
We use Aspen by SumTotal. I will be contacting them next, but
wanted to know what to do in Coursebuilder first.
Does anyone know the answer or know someone who has had
success with Coursebuilder communicating with an LMS?
Thanks,
JoyceDoes your course have a quiz, with a Quiz Results page? If so, in my experience, as long as the Quiz Results page is near the end of the project with just one or two slides after it, and the user clicks the Continue button on the Quiz Results slide before closing down the lesson file, then the LMS seems to get the data fine.
-
Hello,
I'm not very familiar with Cisco Prime Infrastructure or LMS.
I would like to use the application to manage wired devices such as routers and switches and, in a future phase, wireless devices.
I understand CPI allows me to monitor my devices but I'm not sure if I can configure them, for example, what if I need to configure a port, a vlan, or anything, is it possible to do this with CPI?
I also see that getting CPI will include a license for LMS, can both of those applications be installed on the same appliance server?
Thanks.Hi Daniel,
LMS and PI cannot be Installed on the same appliance server.
LMS must be installed in a separate VM or an a UCS server or physical NCS appliance alone.
Prime LMS
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps11200/data_sheet_c78-697479.html
Functional Comparison between the 2 products:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
Check the below post ,it will be helpful:
https://supportforums.cisco.com/message/3916572#3916572
As per me , you can start the Cisco Prime LMS for now as your focused is to manage the LAN device currently and in future when you plan to manage wireless devices , you can start using PI . I hope by then we should have compelte data migration from LMS to PI.
Thanks-
Afroz
[Do rate the useful post] -
What are the steps to upgrade the IOS on a 2960-X stack using LMS 4.2? Can I use the .bin file or do I need the.tar file? Also, will this upgrade all the stack members or just the stack master?
By my count, you have ~100 devices in that building. I would expect many of the IP phones will have a PC attached. Why is your port count so high? 192 ports or 240 ports per the quotes seems like too many.
Also, you might want to check the 3650 switches. They are basically replacements for the 3750x with newer technology and the same price point.
It doesn't look like 3750 + 2960 makes sense. Why add another bottleneck and layer of troubleshooting if not necessary? Why not just stack the number of switches you need instead of adding a semi-distribution layer? Stacking provides much more throughput than copper uplinks. If you need more throughput to the cores, use 4 X 10G uplink interfaces. -
Hello,
I am trying to obtain some information regarding the Adobe online LMS solution.
I believe that it incorporates Adobe Connect. I'd like to know the pricing using per user with courses that I create in Adobe Captivate 8.
Also, I need some very robust reporting options and statistics right "out of the box".
Any information is greatly appreciated.
Thanks so much!dubgee,
Licesning and pricing is not a forum appropriate discussion. I'd be happy to speak with you off forum if you would like. You can reach me at jorma[at]realeyesconnect.com, and I'll happily walk you through the licensing options for Connect and we can look a pricing for what will best fit you. If it helps, here is a reference we put together about the licensing available for Adobe Connect, Setting the Record Straight on Adobe Connect Licensing | RealEyes Media.
Maybe you are looking for
-
I having problems saying i need to upgrade my flash player and when i do nothing happens
I cant seem to get flash player to work. I just got a new macbook pro a couple days ago and some videos and programs dont work. It say "missing plu in" the ill click on a link and get directed to adobe flash. I downloaded it but still nothing works.
-
Wrong embedded colour profile causes huge jpg files when published to .Mac
D'oh! i posted the following on the iDisk discussion my mistake. Here it is all again for iWebbites: I've spent most of the day trying to optimise my new iWeb site on .Mac but the published jpg files are far too big. Despite sizing to 800x600 px and
-
No messaging notifications or caller id on Lumia 9...
As of a couple of days ago, I haven't been receiving messaging notifications. I still recieve the message, they just don't show up on the live tile, the lock screen or make a sound. It's getting very frustrating. Also, whenever I recieve a call, I do
-
Get wrid of Duplicated files!
Hi! I have just bougth Nano 4 gig! I dragged a folder of songs over to it . I thought How cool is this! But it said that is was not room for all of the songs. Hmmm I thought: How strange. When it was done adding all the songs I notised that most of t
-
Is there a way to recover deleted pictures from Samsung Galaxy S4?
Is there a way to recover deleted pictures from Samsung Galaxy S4? I thought I was deleting one picture and instead deleted an entire album.