AW01N Asset Comparisons

Dear experts,
AW01N Asset Comparisons
AUC Asset value fiscal year 2007 is 4,245,383.00. Next year 2008 fiscal year start Asset value 4,245,383.00 and Change value is 77,175,945.48. 2008 fiscal year end value 81,421,328.48. Next year 2009 fiscal year start value updated 81,483,428.48, correct value is 81,421,328.48. But system updated the value 81,483,428.48. This difference is 62,100. Fiscal year 2011 After Asset settlement system shows the 62,100 net book value. Why system updated the wrong value in fiscal year 2009 start value.
Could you please guide me any one
Thanks,
Samudra,

Dear Srinu,
Thank you for your replay
But this asset is the AUC asset. This asset no needs to run depreciation   I mentioned below yearly wise asset values.
Fiscal Year    APC Transaction     Acquisition value     Net Book value
2007             4,245,383.00          4,245,383.00                 4,245,383.00
2008             77,175,945.48        81,421,328.48     81,421,328.48
2009             40,502,100.34       121,985,528.82               121,985,528.82
2010              8,633,545.37       130,619,074.19               130,619,074.19
2011           130,556,974.19-                 62,100.00     62,100.00
1) AUC value fiscal year 2007 value is 4,245,383.00 and acquisition value is 4,245,383.00.
2) Fiscal year 2008 value is 77,175,945.48 and acquisition value is fiscal year 2008 77,175,945.48 + fiscal year 2007                 4,245,383.00 = 81,421,328.48.
3) Fiscal year 2009 Value is 40,502,100.34 and acquisition value is fiscal year 2009 40,502,100.34 + fiscal year 2008 Acquisition value 81,421,328.48 = 121,923,428.34. But system updated 121,985,528.82.
4) Fiscal year 2010 Value is 8,633,545.37 and acquisition value is fiscal year 2010 8,633,545.37 + fiscal year 2009 Acquisition value 121,985,528.82 = 130,619,074.19.
5) Fiscal Year 2011 AUC asset settlement to main asset 4,245,383.0077,175,945.4840,502,100.34+8,633,545.37 = 130,556,974.19-
After AUC asset value is Zero. But system shows the net book value is 62,100.
(Why system updated 2009 fiscal year acquisition value 121,985,528.82)
Please guide me any one.
Thanks,
Samudra.

Similar Messages

AW01N - Asset Not Fully Depreciated, Only till 2014

Dear Gurus,
There was an asset created in 2010 with the useful life of 10 years. I.e the asset should fully depreciated in 2020. When I look at AW01N, Comparison tab, it shows the planned depreciatation of 4 years only. the asset only depreciates upto 2014 (it does not fully depreciate).
I looked into the FYV which is as well defined beyond 2014. Please let me know if there is any configuration missing.
Thanks
Edited by: Priyadarshini on Apr 25, 2011 6:12 PM

Hi Priya
It makes my belief stronger that the World is going to end soon.. SAP has also realized it... :).
Jokes apart, does your Multi Level Method (AFAMA / AFAMS)has "rem life" indicator ticked.... If yes, then the present behaviour is not justified unless and until
a. you have posted any Unplanned dep and hence, the total dep till 2014 equals the APC Value of the asset, or
b. you have specified any change over method in your Dep Key or
c. you have specified any Cut off value Key in your dep key / Scrap Value in the Asset Master
Does, any of these reasons hold good?
br, Ajay M

Asset acquisition value is not updating in Asset history sheet & AW01N

Hi,
The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
I have also checked the below link but still i am persisting the same problem.
Asset acquisition value not updating
Regards
Amit

Hi Amit,
check note 366848.
Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.
At first run the report RACORR110_B. Check the field ANLC-ANSWL bevor and after running the report.
The report RACORR110_B accumulates the values of the asset line items and writes the result in the field ANLC-ANSWL.
After this, please start the report RACORR55. This report forwards the values in the following year.
(If this is not the reason (ANLC is correct), the report makes nothing.)
Regards Bernhard

Asset history sheet not picking Aw01n data

Dear SAP experts,
Would anybody know any reasons why report S_ALR_87011990 (Depreciation Area 15 - Revaluation) is not bringing expected data?
Output is showing Zero but if you click in the lines, it will call up AW01N view correctly. Problem is in the output of 87011990 History sheet.
However, if you run Asset list via S_ALR_87011964, data comes up correclty and if you click in each line, it will also call up AW01N asset explorer view.
Any help is welcome
Thank you

Hi
For Reports Goto T.code SAP1
Anil

AW01N error related to AFAR

Hi,
I have Executed the AFAR-Depreciation Re-calculation as there was some problem in the depreciation key and made the changes and did the AFAR.
After that when go to AW01N asset history sheet,it is giving the error as given below.Kindly advice me how to fix this.
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 2009
Message no. AU390
Diagnosis
Depreciation terms were changed in depreciation area 01 since the last time depreciation was recalculated. The values for Ordinary deprec. that were saved in the database in fiscal year 2009 are therefore different from the newly calculated values by an amount of 94.12-.
Procedure
Check if the newly calculated values are correct. If they are, then carry out a depreciation recalculation. You should be aware that if you recalculate depreciation, new values could arise for all open fiscal years, and these would then have to be posted to the general ledger by means of a depreciation posting run.
If, on the other hand, you want to keep the values that are saved in the database, you have to set the depreciation terms back to how they were at the time of the last depreciation recalculation.
To see a comparison of the old and new values, you can use the Display dep. calc. function in the asset value display or the Recalculate values function in the Asset Accounting menu.
Proceed
Thanks
Supriya

Hi
It essentially means that depreciation has been recalculated. You have a positive value for depreciation. However, that is generally not correct from accounting point of view. Check the configuration of the period control methods assigned to your depreciation keys
regards
Sanil Bhandari

Vendor payments and debts about an asset

Dear sap colleages
I need to know these information about an ASSET:
Purchased orders,
Items from purchase orders,
which of these items i've received, i've paid (also date), i've not paid ( amount of debt related to asset)
payments in advanced (date),
wich of these payments have been cleared (clearing date) and wich not,
who is the vendor,
other expenses (such as delivery)
the amount of taxes,
invoices related and NOT RELATED TO purchase order
payments without invoice
Which transactions do i need to follow?
or
Which document flow?
or
Which tables? Wich keys?
or
Is there a standard report that can give me such information?
Any documentation and/or code will be appreciated.
I need to program a report to integrate all these information.
Thanks and Kind Regards

Hi,
Refer to T.code AW01N - Asset Explorer .
Additionally you cna also refer to SAP Standard reports in Asset Accounting
Accounting - Financial Accounting - Fixed Assets - Information System - Reports on Asset Accounting
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Asset Explorer -- Acquisition Value Year-End

Dear all,
I'm looking on how to fetch a certain value...
If you access transaction AS03 You'll see th master data for a certain asset.
Now... if you click on the "Asset value"-button, you'll be redirected to transaction AW01N, "Asset Explorer".
In the asset explorer (under the "Posted values"-tab) there is a table. This table contains a row "Acquisition value" and a column "Year-End".
My question is, how to get this value (which table.field and/or which Function module)?
It looks like this (png screenshot)
[Screenshot(png)|http://www.kaneka.be/images/AssetExplorer.png]
Many, many thanks in advance.
Kind reagards.
Edited by: Guy Vleugels on Jul 28, 2008 11:34 AM
Edited by: Guy Vleugels on Jul 28, 2008 11:36 AM

Dear Kiran,
Thanks for the advice on the BAPI function.
It seems it doesn't contain this value.
Thank you.
Dear Gautham,
Is this ANLCV a structure-table?
I cannot browse this table with the data-browser [SE16].
Can I only browse/fetch data from this table through creating a new function module, or is there an easier way?
Many thanks in advance.
Kind regards.

Standard reports in Fixed Assets

Hi all,
Is there any standard report in SAP that gives the information on additions made to the asset. I looked into the report S_ALR_87011990(asset history report), it has all the information I need except for additions made and corresponding depreciation for that addition. Could anyone tell me if there is any or how do I go about this problem. Please tell me if custom report is a must in this case, also the tables where I can find this information.
Thanks in advance
Kumar

These are report avaiable in SAP
| |-- Fixed Assets
| | |-- Asset Accounting Information System
| | | |-- Individual Asset
| | | | -
AW01N Asset Explorer
| | | |-- Asset Balances
| | | | |-- Balance Lists
| | | | | |-- Asset Balances
| | | | | | |-----S_ALR_87011963 ... by Asset Number
| | | | | | |-----S_ALR_87011964 ... by Asset Class
| | | | | | |-----S_ALR_87011965 ... by Business Area
| | | | | | |-----S_ALR_87011966 ... by Cost Center
| | | | | | |-----S_ALR_87011967 ... by Plant
| | | | | | |-----S_ALR_87011968 ... by Location
| | | | | | |-----S_ALR_87011969 ... by Asset Super Number
| | | | | | -
S_ALR_87011970 ... by Worklist
| | | | | |-----S_ALR_87010125 Sample for Address Data for Asset
| | | | | |-----S_ALR_87010127 Real Estate and Similar Rights
| | | | | |-----S_ALR_87010129 Vehicles
| | | | | -
S_ALR_87011978 Asset Balances for Group Assets
| | | --- Depreciation Posted
| | | | |-----S_P99_41000192 Posted depreciation by asset and posting period
| | | | -
S_ALR_87010175 Posted depreciation, related to cost centers
| | | |-- Depreciation forecast
| | | | |-----S_ALR_87012936 Depreciation on Capitalized Assets (Depreciation Simulation)
| | | | -
S_ALR_87012026 Depreciation Current Year
| | | |-- Day-to-Day Activities
| | | | |-- International
| | | | | |-----S_ALR_87012048 Asset transactions
| | | | | |-----S_ALR_87012050 Asset Acquisitions
| | | | | |-----S_ALR_87012052 Asset Retirements
| | | | | |-----S_ALR_87012054 Intracompany Asset Transfers
| | | | | |-----S_ALR_87012056 Directory of Unposted Assets
| | | | | |-----S_ALR_87012058 List of Origins of Asset Debits
| | | | | -
S_ALR_87012060 List of Origins by Cost Elements
hope this is helpful...
Please asign points as a way to say thanks.

Asset advance Payment

Hello All,
I want to confirm that my client has made the down paymewnt with respect to Asset PO at the time of down payment whether the payment amount will be loaded to asset or not.
As i know the payment amount should got to venders spl. gl a/c and it should not be load to asset .
This has happened here and because of it the system has calculated the depreciation twice one at the time of adv payment and other at the time of vender invoice.
please tell me what could be the reason behind that.
suggest

Hi
As per my understanding about your issue.
While posting advance payment with asset system will post to asset also with reference PO. Because of you may mention PO as well as Asset number. So that's system will post the entry to respective items and also you may select Transaction type 180 at asset line level. You can also check in the T.code AW01N asset balance as well as PO level.
And also please check advance payment date as well as depreciation run date.Because of you run Depreciation first after that you may post advance payment with the same date and with same periods after run the depreciation.
So that's why system will shows two time in the asset history.
I hope it will helps you.
Thanks and Regards
vamsi

Asset invoice

Dear All,
How to view the asset invoice line items details ? what is T.Code for that ? Like vendor (FBL1n)and customer (FBL5n) details ???
Regards,
krishna.

hi,
To see the line item details for the Asset invoice it is same as we are purchasing from vendor only,
you can use FBL1N or else you can see the details in AW01N (Asset Explorer), where you can select a particular Asset and can see all the details regarding Vendor, Depreciation, Cost center assigned, and much more.
If you find it useful, reward points/
Cheers,
Haider

How to view Archive documents in AW01N?

Hi,
I have 2 questions related to Asset Accounting
1. All my FI documents have been archived prior to 2007. Now in AW01N (Asset explorer), I am able to see the values of any asset prior to 2007. But, when i double click the Line item like Acquisition, sale, it isnt going to the FI doc and i receive an error message " It is not possible to view the accounting document" since its archived. In asset explorer, there isnt any document no., so I am unable to find which document it is.
2. We can post depreciation to Cost centre and Internal order, Whether can post to a Network or an activity?
Kindly let me know if anyone knows the solution
Regards,
Ameet
9840244480

Hi Markus,
Thank you for your reply!!!!
It helped me getting the accounting document nos. when Acq, retirement transactions are made. I have another issue, when a settlement from the WBS element is done to an asset, I am able to get the settlement document no. and when i branch in from the settlement doc to the accounting doc, i get the same error "Accounting document cannot be dispayled from financial accounting"
Is there anyway i can see the archived accounting document from a settlement document.
Thanks in Advance for your help!!!
Regards,
Ameet
9840244480

How can i see the Asset purchase order & GR after settlement

Hello Gurus,
Would you please tell me how can i check the Asset Purchase order, which is settled (WBS Element)? How can i see the GR document for the specific asset? & if i treat as a expeneses toward the project where i get the GR/ PO in asset explorer?
Warm Regards,
Dhananjay Rahane.

Dear,
Dhanajay.
Purchase order related to asset you can see in Asset Master itself. Go to AS03 - Environment ( Menu bar ) - Click on Purchase Order. Here you will have all the relevant PO's relating to asset.
GR you can see in PO at a Purchase Order history. The data relating to asset you can see in left hand side navigation in AW01N Asset Explorer. Like as Vendor, PO's, etc.
WBS in PO you can see in Account Assignment Tab if your PO is created with N. ( Network PO ). WBS linked to Network you can see in CJ20N ( Project Builder ).
WBS Actual values can see in report CJI3 Actual Cost & Revenues.
I hope this helps you to solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

APPRECIATION IN ASSET AC

HI AA experts,
I am editing the message:
Go live has done this year June and Dep uploaded for 3 months (Apr, May, June) and dep run in July in AFAB.
but APPRECIATION IS POSTED instead of Depreciation.
Can I know is it configuration error and any master data error??
Suggestions pleas.................!!!!
Rgds,
VR
Message was edited by:
venkata raju khottari

Have a look in customizing if you missed something:
Asset Data Transfer / Asset Data Transfer / Parameters for Data Transfer / Date Specifications
- Specify Transfer Date/Last Closed Fiscal Year
- Specify Last Period Posted in Prv.System (Transf.During FY)
Asset Data Transfer / Asset Data Transfer / Parameters for Data Transfer / options
- Specify Entry of Net Book Value (No Accum. Ordinary Depr.)
- Recalculate Depreciation for Previous Years
When you look in an asset: AW01N - Asset Explorer in the tab poste value you see the plan and poste values. With that values you can see wath is going wrong

Asset details

Hi,
what is the screen to chk the asset whether it has been moved from the Legacy system!
Regards
Prathap

Hi Ram,
Thanks for the response.
There are many legacy assets in our system. We need to track the assets which are coming from legacy system. Checking AW01N, asset by asset is difficult. In AR02, we are not getting such details.
Is there any other way to see all the legacy assets that moved.
Regards
Prathap

Write up depreciation in AW01N ?

Dear All
Experts ,
Where I can see my Write up deprciation in AW01N ( Asset Explorer ) ?
And if it is not possible to see there , Then where else I can see it ?
Can I see my Depreciation date wise in AW01N ?
Please guide me.
Your help is appreciated.
Regards,
Pankaj.
Edited by: pankaj_ab on May 26, 2009 12:50 PM

Where I can see my Write up deprciation in AW01N ( Asset Explorer ) ?
Yes there is a line with Write-up
Can I see my Depreciation date wise in AW01N ?
Yes, all details are there by posting period

AW01N Asset Comparisons

Similar Messages

Maybe you are looking for