AW5.2 problem with KEY variable

Hi everyone,
I don't know what i'm missing. I tried several ways but
nothing so far.
I have an interaction where the user has to hold down the CLT
first, then
ALT, then ENTER. I attached a calculation icon before and
after the
interaction that has Flushkey() and PressKey(""). I thought
the
PressKey("") will clear the key that the user has pressed.
When i click on
the repeat button, it still remembers the keys that was
pressed and skips
the interaction.
In the interaction, I have 3 keypress icons, each for CLT,
ALT ,
Enter|Return. Another keypress icon for wrong feed back set
to "?". A
calculation icon that is set to Key="CtrlAltEnter" for
correct response.
I really don't know how to reset the Key variable. I thought
the
PressKey("") would clear it. Any ideas?
Thanks.

Thanks to you all guys. You were very helpful. Actually it
worked by
adding a space inside the quotes in the PressKey(" ").
I am sorry i wasn't clear in my email. I meant the user can
hold down the
Control and Alt keys in either order, then pressing the Enter
key on the
keyboard. It works fine. I gotta test it on the packaged
piece to see if
it works ok :-/
thanks again :)
"Mike Baker **Adobe Community Expert**"
<[email protected]> wrote in
message news:[email protected]...
> You're on the right track with PressKey but you can't
give it an empty
> string. You have to give it something to press. Perhaps
> Ctrl and Alt are 'modifiers' they are not seen as actual
keys. The
> Authorware runtime doesn't receive a key until you press
the enter. So
> your
> KeyPress entry would be CtrlAltEnter. There's no way to
tell if they do
> Ctrl
> first or Alt. In Windows keypresses there isn't any
difference between
> AltCtrlEnter and CtrlAltEnter.
>
> HTH,
> Mike
> ====================
> Mike Baker
> Adobe Community Expert
> [email protected]
>
> "forums.macromedia.com" <[email protected]>
wrote in message
> news:[email protected]...
>> Hi everyone,
>>
>> I don't know what i'm missing. I tried several ways
but nothing so far.
>>
>> I have an interaction where the user has to hold
down the CLT first, then
>> ALT, then ENTER. I attached a calculation icon
before and after the
>> interaction that has Flushkey() and PressKey(""). I
thought the
>> PressKey("") will clear the key that the user has
pressed. When i click
> on
>> the repeat button, it still remembers the keys that
was pressed and skips
>> the interaction.
>>
>> In the interaction, I have 3 keypress icons, each
for CLT, ALT ,
>> Enter|Return. Another keypress icon for wrong feed
back set to "?". A
>> calculation icon that is set to Key="CtrlAltEnter"
for correct response.
>>
>> I really don't know how to reset the Key variable. I
thought the
>> PressKey("") would clear it. Any ideas?
>>
>> Thanks.
>>
>>
>
>

Similar Messages

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Problem with String variable

I am new to Java Programming.
I have a line of code that works and does what is supposed to.
faceData.getProfile("Lisa").removeFriend("Curtis");
If I assign the strings to variables such as-
String name = "Lisa";
String fName = "Curtis";
and then plug those into the same line of code, it does not work
faceData.getProfile(name).removeFriend(fName);
What could be causing the problem?
I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Is Anyone Else Having Problems With Key Chains After Installation?

My installation went ok but I'm having all kinds of problems with Key Chains now that I didn't before. In addition to them being corrupted, it won't let me save corrected names and passwords even when it asks for them.

Is there a fix if you don't have your Key Chains folder from before the 10.6 installation? I keep having to re-type my MobileMe and student Gmail passwords in Mail, and if I check remember password in Key Chain, I keep having to re-type the password until I uncheck the box, but then that means I have re-type the password every time I send an email or put the computer to sleep.
Also, Keychain Access's First Aid shows that there are no problems whatsoever. When I click on MobileMe in my System Preferences I get 8 or so consecutive errors stating "Keychain Error. There was a problem saving to your keychain. Try again or use Keychain Access to verify your keychain." When I look at my login within Keychain Access, it says my MobileMe keychain is restricted (even after entering my administrator password).

Problems with /tmp variable

Hi,
I'm writing a shell script and I seem to be having problems with a variable that is creates a directory in the /tmp directory. Essentially, there are several points where various parts of the script call out information that gets exported to that directory. My script is failing upon creation of this directory, is there any specific permissions on the /tmp directory in mac that would need to be set before something like this occurred?
Thanks!

My script is failing upon creation of this directory
Maybe you could post your code, that way we can see how you're trying to create the directory and may be able to spot the problem. As it is we're working blind, and that's not easy.

Problem with key Server in GETVPN

I had a problem with my key servers in GETVPN, I could not understand well so far. My two key servers had problems with being a key issue of inspiration and had other physical problems. I have configured the OPEN and CLOSED in my understanding communication between GM should continue with the same problem with key servers, but went more than 24 hours and ended up falling all GETVPN network. My question is as follows: after the fall of the keys, primary and secondary servers in more than 24 hours while the TEK keys no longer work and the whole network goes down and it even?
Eduardo Severo
[email protected]

Those fields should be on top of the view's field list. Also, the join conditions must be complete, e.g. also include MANDT, as far as I know.
The system defines all view fields as key fields, if it cannot otherwise determine a unique key based on the join conditions and the primary keys of the joined tables.
If that's not it, I have no further idea.
Thomas

Problem with environment variables

JAVA_HOME = C:\JBuilder9\jdk1.4
Path = C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip
When I run foo.java I get this error, which i believe is because of some kind
of problem with environment variables.
Exception in thread "main" java.lang.NoClassDefFoundError: OraThinI eliminated this path
C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin
just to check whether two paths of jdk bin folder is causing problem but I see no change.
Please help

I had solved it myself
I am a genious :P
Just do this
JAVA_HOME = C:\JBuilder9\jdk1.4
CLASSPATH = C:\oracle\product\10.1.0\Db_1\jdbc\lib\classes12.zip;.;%JAVA_HOME%\bin
PATH= C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip;%JAVA_HOME%\bin

Problem with application-variables - CFLOCK?

Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas

> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( "<p><p> The current user is no
longer valid, please log in
> again.</p></p>" & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam

Problem with hierarchy variable while displaying query in Portal

Hi,
I came up with an problem with a query in the portal. The problem is :
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results.
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
I never Worked with WAD. I tried finding out the variable definition. But i was unable to find out where the Hierarchial variable was defined.
Please help me out regarding the same.

The problem is sovled.
Poornima.

MacBook Pro 15 with Windows 8.1 installed via Boot Camp problem with keys "@" and " " of the keyboard

Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.

The language of my Keyboard is French

Problem with substitution variable

Hi All,
I am facing problem with usage of substitutiion variable. I have following code in my script
Edited by: Tarak on Mar 4, 2009 3:27 AM

sorry I missed the script.
create table tempdata
(description varchar2(200))
TABLESPACE &tspacename
/Sqlplus is not asking for the value of tspacename.I am getting following error.
TABLESPACE &tspacename
ERROR at line 3:
ORA-02216: tablespace name expectedI am not sure what is wrong with SQLPLUS setting.Can anybody help?

Having problem with setting variable on a textfield

I'm using createTextField to create a textfield. I have also created a input textfield with a variable called textline1 (I don't create the inputfield with as).
I want to display the letters in the created textfiled that I'm typing in the input field. So this in my AS coed:
_root.createTextField("text1",1,100,100,300,100);
text1.variable = textline1;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = 50;
format1.bullet = false;
text1.setTextFormat(format1);
but it doesn't work. So anyone see the problem?
(sorry for bad english)

i think you're going to have more problems if you continue using textfield variables. you should not use them. just use the text property of the textfield to reference its contents.
but, if you want to continue, use:
var tl:MovieClip=this;
fontsize=20;
myInputText_txt.onChanged = function(text1:TextField) {
_root.myText_mc.createTextField("text_txt",1,100,100, 100,100);
_root.myText_mc.text_txt.variable = tl["text2"];
text2=text1.text;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = fontsize;
format1.bullet = false;
text_txt.setTextFormat(format1);
p.s. please mark this thread as answered.

BI 7 Upgrade - Problem with Authorisation Variable on Compounded Char

Dear All,
We have just upgraded our DEV environment from 3.5 to BI7 and have encountered a weird problem with 1 of our authorization variables.
Our authorization check variable checks the values from a table that the users are allowed to use (which includes the selection screen). There are 2 variables 1 for the uncompounded char and 1 for the compounded char, the uncompounded variable is working just fine but not the other. When the user tries to pick a value, they are presented with not just their restricted list but ALL the values.
Can anyone explain this? Has BI 7 changes the way authorizations work with Compounded Characteristics ?
Before anyone asks, these variables work just fine on 3.5 and are working just fine in our QA and PRD environments.
Help required urgently.
Thanks
Craig

Hi,
Yes authorisations in BI 7.0 are a bit different from the ones in BW 3.5. Here is the link which will help you know every thing in BI 7.0
bw 7.0
Regards,
Habeeb
Assign points if helpful.

Purchased ColdFusion 10: Having problem with session variables

My Dept. has just bought CF10 and I'm finally updating my existing web app to CF10 from CF8. My First Problem with CF10 is using session variables.
When using the lower version of CF (since CF 4 to 8) I have never had any problem setting up session variables and getting or using these variables in other pages after a successful login but with CF 10 it seems setting session variables and using them in other pages are a major problems. I'm not sure where have I done wrong in the codes.
First I'm setting the session in my Application.cfc This way:
<cfcomponent displayname="Application" output="true">
<cfset THIS.Name ="MyNewApp"/>
<cfset THIS.ApplicationTimeout = CreateTimeSpan(0,0,20,0) />
<cfset THIS.SessionManagement ="YES"/>
<cfset THIS.SessionTimeout = CreateTimeSpan( 0, 0, 20, 0 ) />
<cfset THIS.SetClientCookies = false />
<cffunction name="OnApplicationStart" access="public" returntype="boolean" output="false">
<cfset application.Main_DSN = "TESTDB">
<cfreturn true />
</cffunction>
<cffunction name="onApplicationEnd" output="false">
      <cfargument name="applicationScope" required="true">
    </cffunction>
<cffunction name="OnSessionStart" access="public" returntype="void" output="false" hint="Fires when user session initializes.">
<cfset session.loggedin = "NO">
<cfset session.username = "">
<cfset session.userrights = "">
<cfset session.usergroup = "">
</cffunction>
</cfcomponent>
After login, user is validated and set values to those session.variables:
........user validation codes here......................
<cfif mylogin NEQ true>
      <cflocation url="/login/login.cfm">
      <cfabort
<cfelse>
      <cfset session.loggedin="Yes">
      <cfset session.username="#Trim(Form.username)#">
     <CFSET qUserRights = LoginObj.getUserRights('#Trim(Form.username)#')>
     <cfset session.userrights = qUserRights>
    <CFSET qUserGroup = LoginObj.getUserGroup('#Trim(Form.username)#')>
        <cfloop query="qUserGroup">
           <cfset session.usergroup = user_group>
           <cfbreak>
        </cfloop>
    
   <cfdump var="#session.loggedin#">
   <cfdump var="#session.username#">
   <cfdump var="#session.userright#">
   <cfdump var="#session.usergroup#">
</cfif>
In index.cfm, Before Login I got:
session.loggedin = NO
session.username = ["empty string"]
session.userrights = ["empty string"]
session.usergroup = ["empty string"]
After a successful Login:
session.loggedin = NO
session.username = ["empty string"]
session.userrights = ["empty string"]
session.usergroup = ["empty string"]
Have I done something wrong? These codes work on CF8. Please help.
I need to mentioned:
CF10 is in Linux and my web app is under https not http. But these session variables should be shared bentween http and https because some older application are still in http.

On which page is the following code?
After login, user is validated and set values to those session.variables:
........user validation codes here......................
<cfif mylogin NEQ true>
      <cflocation url="/login/login.cfm">
      <cfabort
<cfelse>
      <cfset session.loggedin="Yes">
      <cfset session.username="#Trim(Form.username)#">
     <CFSET qUserRights = LoginObj.getUserRights('#Trim(Form.username)#')>
     <cfset session.userrights = qUserRights>
    <CFSET qUserGroup = LoginObj.getUserGroup('#Trim(Form.username)#')>
        <cfloop query="qUserGroup">
           <cfset session.usergroup = user_group>
           <cfbreak>
        </cfloop>
    
   <cfdump var="#session.loggedin#">
   <cfdump var="#session.username#">
   <cfdump var="#session.userright#">
   <cfdump var="#session.usergroup#">
</cfif>

AW5.2 problem with KEY variable

Similar Messages

Maybe you are looking for