AWM 11g ERROR

Dear All,
I have Oracle 11g X84_64 database installed in my server. then i install Oracle database client for Windows 32 including OLAP (AWM) 11g. i found some error when i maintain the cube, then when i click to mapping, all the mapping i had was disapear. then i must disconnect the connection and re-connect again and re-do mapping
i dont know whats wrong with it. is it something wrong with the java or something else... seems like the errors are inconsistence. once its success to maintain the cube but then when i repeat it, i got some error...
is there any bugs reported in AWM 11g?
thanks for your response

Thier is a patchset out for the 11G OLAP option that includes the database side and an update to the AWM. As of last friday the patch was only available for the Linux version. I would wait for the patch for windows before you proceed any further the unpatched 11G OLAP option is, in Oracle's words, "Unusable".

Similar Messages

Multilingual support in AWM 11g

Is there a multilingual support in AWM 11g? I don't see Languages folder in the AW tree.

Hey Dude,
This looks like a syntactical issue. In your code snippet it looks like you have forgotten the comma (,) after the first argument for the lookup function DENSE
'INDEXCOL( VALUEOF(NQ_SESSION.LAN_INT), "SCOTT"."DEPT"."DEPARTMENTNAME" , LOOKUP( DENSE "SCOTT"."LKP_TABLE"."DEPARTMENTNAME" , "SCOTT"."DEPT"."DEPATMENTNUMBER" , VALUEOF(NQ_SESSION.WEBLANGUAGE)))
It should be
'INDEXCOL( VALUEOF(NQ_SESSION.LAN_INT), "SCOTT"."DEPT"."DEPARTMENTNAME" , LOOKUP( DENSE, "SCOTT"."LKP_TABLE"."DEPARTMENTNAME" , "SCOTT"."DEPT"."DEPATMENTNUMBER" , VALUEOF(NQ_SESSION.WEBLANGUAGE)))
Try that and see if it helps. I would also revisit the syntax structure for the lookup when using DENSE just to ensure you are on the safe side but that should solve your problem.
Please award points if this was the correct answer or mark it helpful if it was.
This also looks like a double post so I'll stick with this one for the forum thread.
Cheers,
Christian

Budgeting and Forecasting in AWM 11g

Hi,
We are looking at implementing the budgeting and forecasting capabilities into an Oracle OLAP 11g Cube built using AWM v11.1.0.6.0A.
On a very high level, we have the following questions:
1. What are the options available in AWM 11g for budgeting/forecasting.
2. What are the limitations/pre-requisites (in terms of cube or AW design).
3. Steps required to create a budgeting/forecasting model (like what needs to be done in the Cube Scripts) in AWM.
Any inputs on the above are highly appreciated.
Thanks and Regards,
Piyush

There is, unfortunately, no direct support for Forecasting in 11g AWM or the 11g OLAP API (which sits underneath AWM). But there is support for this in the OLAP DML and I recommend that you look at the OLAP DML Reference documentation. For forecasting, for example, see
FCOPEN function -- Creates a forecasting context.
FCSET command -- Specifies the forecast characteristics.
FCEXEC command -- Executes a forecast and populates Oracle OLAP variables with forecasting data.
FCQUERY function -- Retrieves information about the characteristics of a forecast or a trial of a forecast.
FCCLOSE command -- Closes a forecasting context.
These can be built into a DML PROGRAM, which can in turn be run from a Cube Build Script (as an OLAP DML command step).
You can write directly to the variables of a cube (provided you have not enabled Materialized Views, which is unlikely in this case).
There is support in the 11g OLAP API for MODELs in the OLAP DML sense, but this has not been exposed through AWM. You can use the API (Java or XML) to create models, custom members, and rules in models. See
OLAP Java API Reference (Javadoc)
In particular you may want to see classes
oracle.olapi.metadata.mdm.MdmModel and subclass MdmDimensionCalculationModel (to represent a model)
oracle.olapi.metadata.mdm.MdmAssignment (to represent an assignment of the form lhs = rhs in a model)
oracle.olapi.syntax.ConsistentSolveSpecification (to associated a model with a cube)
oracle.olapi.syntax.Expression and subclasses (to define rhs of model assignments)

Upgrade to AWM 11g r2

I am considering upgrading AWM 10g r2 to AWM 11g r2 however, I am concerned about the following:
1) Do structure/object names stay the same when upgrading?
2) Is there writeback capability in AWM 11g r2?
3) Is AWM 11g r2 compatible with Oracle Warehouse Builder, specifically OWB 10.2.0.5.0?
If someone could provide some information on the above it would be very much appreciated.
Thanks,
Kristine

3) Is AWM 11g r2 compatible with Oracle Warehouse Builder, specifically OWB 10.2.0.5.0?Check [this link|http://www.oracle.com/technology/products/warehouse/htdocs/OTN_Certify.html] for the certificaiton matrix.
Thanks,
Brijesh

Error when I try to create dimension with AWM 11g

hello, I have installed Analytic workspace manager 11g, and I have created a connection to an oracle database, but when I try to create a dimension 2 errors appears by alternate :
1/
La transaction ne peut pas être validée : "Erreur sur le serveur
Classe d'erreurs : Echec dExpress
Descriptions des erreurs du serveur :
DPR : Création impossible du curseur de serveur, Générique à TxsOqDefinitionManager::generic<CommitRoot>
INI : Impossible d'analyser la chaîne XML envoyée par le client au serveur, Générique à XML Parser Errors:
Error processing subelement: <StandardDimension><Attribute><BaseAttribute><Classification>
Error processing tag: Classification:
Error returned by xsOqXmlParserExecute.
2/
Des erreurs se sont produites lors de lanalyse XML
<Ligne 3, Colonne 15> : <Line 3, Column 15>: XML-20210: (Fatal Error) Unexpected EOF.
help me stp.

Hi,
This question is missplaced in this forum.
Please ask this question again, the appropriate forum is found here:
OLAP
(OLAP forum)
thanks
Jorge

[OBIEE-11g] Error getting Nqid always null value

Hi to all, I've a problem to load Nqid in a dashboard on 11g OBIEE.
The javascript function return always a null value and the document.cookie instruction return an empty string ...
somebody could help me ?!
p.s.: in the firefox properties there is a cookie that contain the id but i can't read it
function getNqid() {
var nameEQ = 'nQuireID=';
var ca = document.cookie.split(';');
for(var i=0; i<ca.length; i++) {
var c = ca;
while (c.charAt(0)==' ')
c = c.substring(1,c.length);
if (c.indexOf(nameEQ) == 0)
return c.substring(nameEQ.length,c.length);
return null;

Hi,
You might want to check the NQQuery.log to see the code that it is running before making a connection. Just to confirm that the connection pool step is working fine, could you try with a simple select statement and see that it does not error out. If it does not, you may want to revisit the procedure code again. I understand from the error that it is expecting something after the END statement (kind of weird though!!). I assume in this case, it could not parse that this is a stored procedure call itself may be. One thread I found is http://stackoverflow.com/questions/4270818/ora-06550-and-pls-00103 which you may want to look for the line break characters.
Hope this helps.
Thank you,
Dhar

Oracle Discoverer 11g Error to create a new public connection

Hi,
Since i have install a new Discoverer 11g, i got this error.
A connection error.
- error while creating the session, check for other errors.
- oracle.discoiv.connections.ConnectionStoreException: While trying to lookup 'jdbc.disco_pstore' didn't find subcontext 'jdbc'. Resolved ''
- While trying to lookup 'jdbc.disco_pstore' didn't find subcontext 'jdbc'. Resolved ''
- While trying to lookup 'jdbc.disco_pstore' didn't find subcontext 'jdbc'. Resolved ''
unable to retrieve connection list
- Cannot retrieve connection list. Check the Discoverer application log for more details.
The installation is an stand-alone without OID but i know why - jdbc looking to the metadata of the pstore.
The database schemas are created and populated by RCU by i cannot use the STAND ALONE mode.
Cheers
Edited by: unsolaris on 7-Apr-2012 5:14 PM

Thank you for your hint, but ...
In Metalink there are no results for me.
This is my metalink address:
https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=PROBLEM&bmDocDsrc=KB&bmDocTitle=Repository%20Assistant%20Fails%20With%20%22ORA-00942:%20table%20or%20view%20does%20not%20exist%22%20In%20Workspace%20Creation&viewingMode=1143&bmDocID=557067.1))
Do you have another address?
Thank you
Regards
Siegwin

OAM 11g: Error while importing Custom Authentication Plug-in.

We are trying to create a sample custom authentication plugin in OAM 11g as per the 11.1.1.5.0 doc.
But while trying to import the plugin via oamconsole (system configuration->Plugins->Import Plugin) we receive an error "Invalid XML Structure".
Do we have to embed the XSD (XML Schema Definition) as well ?
-------------------------SamplePlugin.java-------------------------------------
import oracle.security.am.plugin.ExecutionStatus;
import oracle.security.am.plugin.MonitoringData;
import oracle.security.am.plugin.PluginConfig;
import oracle.security.am.plugin.authn.AuthenticationContext;
import oracle.security.am.plugin.authn.AuthenticationException;
import oracle.security.am.plugin.authn.AbstractAuthenticationPlugIn;
import java.util.Map;
import java.util.logging.Level;
class SamplePlugin extends AbstractAuthenticationPlugIn {
     private static final String CLASS_NAME = "FirstTestClass";
     public ExecutionStatus initialize (PluginConfig config){
          super.initialize(config);
          if(LOGGER.isLoggable(Level.FINE)){
               LOGGER.logp(Level.FINE,CLASS_NAME,"initialize","Entering initialize");
          return ExecutionStatus.SUCCESS;
     @Override
     public String getDescription() {
          // TODO Auto-generated method stub
          return null;
     @Override
     public Map<String, MonitoringData> getMonitoringData() {
          // TODO Auto-generated method stub
          return null;
     @Override
     public String getPluginName() {
          // TODO Auto-generated method stub
          return null;
     @Override
     public int getRevision() {
          // TODO Auto-generated method stub
          return 0;
     @Override
     public ExecutionStatus process(AuthenticationContext arg0)
               throws AuthenticationException {
          if(LOGGER.isLoggable(Level.FINE)){
               LOGGER.logp(Level.FINE,CLASS_NAME,"initialize","Entering process");
          return ExecutionStatus.SUCCESS;
     @Override
     public void setMonitoringStatus(boolean arg0) {
          // TODO Auto-generated method stub
     @Override
     public boolean getMonitoringStatus() {
          // TODO Auto-generated method stub
          return false;
-------------------------SamplePlugin.java-------------------------------------
------------------------SamplePlugin.xml--------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<Plugin name="SamplePlugin" type="Authentication">
<author>Self</author>
<email>[email protected]</email>
<creationDate>09:41:22, 2012-02-05</creationDate>
<version>1</version>
<description>SamplePlugin</description>
<interface>oracle.security.am.plugin.authn.AbstractAuthenticationPlugIn</interface>
<implementation>SamplePlugin</implementation>
</Plugin>
------------------------SamplePlugin.xml--------------------------------
------------------------MANIFEST.MF--------------------------------
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.2
Bundle-Version: 1.0.0.qualifier
Bundle-Name: SamplePlugin
Bundle-Activator: SamplePlugin
Bundle-ManifestVersion: 2
Created-By: 1.6.0_24-b07 (Sun Microsystems Inc.)
Import-Package: org.osgi.framework;version="1.3.0",oracle.security.am.
plugin,oracle.security.am.plugin.authn,oracle.security.am.plugin.api,
oracle.security.am.common.utilities.principal,oracle.security.idm,jav
ax.naming,javax.sql,java.management,javax.security.auth
Bundle-SymbolicName: SamplePlugin
Bundle-RequiredExecutionEnvironment: JavaSE-1.6
------------------------MANIFEST.MF--------------------------------
Contents of SamplePlugin.jar
1. SamplePlugin.xml
2. SamplePlugin.class
3. META-INF/
MANIFEST.MF

I build the Plugin.jar file similarly as above(followed the same steps)..
But when i log into OAM and trying to import the plugin (System Configuration->Plugins- Import Plugin) the browser goes to hung state and i see below error in logs (domain log and in diag log)
I see the jar file created in this location (\Middleware\user_projects\domains\IAMdomain\oam\plugins)
Please let me know if you have any idea..Thanks!
####<Feb 29, 2012 1:10:03 PM PST> <Warning> <oracle.adf.controller.internal.metadata.MetadataService> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-00000000000003fe> <1330549803273> <BEA-000000> <ADFc: /WEB-INF/adfc-config.xml: >
####<Feb 29, 2012 1:10:03 PM PST> <Warning> <oracle.adf.controller.internal.metadata.MetadataService> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-00000000000003fe> <1330549803274> <ADFC-52024> <ADFc: Duplicate managed bean definition for 'accessCheck' detected.>
####<Feb 29, 2012 1:10:03 PM PST> <Warning> <oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000402> <1330549803479> <ADF_FACES-60099> <The region component with id: pt1:_lar has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.>
####<Feb 29, 2012 1:10:33 PM PST> <Error> <javax.enterprise.resource.webcontainer.jsf.application> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000593> <1330549833253> <BEA-000000> <java.lang.NullPointerException
javax.faces.el.EvaluationException: java.lang.NullPointerException
     at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190
####<Feb 29, 2012 1:10:33 PM PST> <Warning> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000593> <1330549833316> <BEA-000000> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase INVOKE_APPLICATION 5
javax.faces.FacesException: #{FileProcessor.doUpload}: java.lang.NullPointerException
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:118)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at oracle.adf.view.rich.component.rich.RichPopup$BroadcastContextCallback.invokeContextCallback(RichPopup.java:666)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBa
>
####<Feb 29, 2012 1:10:33 PM PST> <Error> <oracle.oam.admin.console.policy> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000593> <1330549833361> <OAM-400016> <Failed to authenticate the user
javax.servlet.ServletException: java.lang.NullPointerException
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
####<Feb 29, 2012 1:10:34 PM PST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-000000000000059a> <1330549834008> <ADF_FACES-00009> <Error processing viewId: /plugin-taskflow/authplugins URI: /oracle/security/am/taskflows/authplugin.jsff actual-URI: /oracle/security/am/taskflows/authplugin.jsff.
javax.el.ELException: java.lang.NullPointerException
     at javax.el.BeanELResolver.getValue(BeanELResolver.java:266)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer$PanelCollectionHelper._encodeAll(PanelCollectionRenderer.java:728)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer$PanelCollectionHelper.access$500(PanelCollectionRenderer.java:537)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer.encodeAll(PanelCollectionRenderer.java:402)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
####<Feb 29, 2012 1:10:34 PM PST> <Warning> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-000000000000059a> <1330549834020> <BEA-000000> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.el.ELException: java.lang.NullPointerException
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:804)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)

OBIEE 11G error while installation at the configuration setting(ASinstance)

Hi Experts,
I am trying to Install OBIEE 11G on Windows on Local PC.But getting the following error .
"Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: PermGen space" at the configuration step of ASinstance.
I have set the virtual memory to maximum.Machine's RAM is 2 GB and Virtual memory is 4 GB which meeets system requirement for OBI.
I have treid few options but nothing seems to workout :( . and even Downloaded and tried to Install the software again.
Any help on this highly appreciated.
Amit

Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Ping failed in Ready callback for proc:1035801255
All other log files (presentation, bi server, scheduler, cluster controller) contains the following error message:
Error Message: The configuration file (C:\obi\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config.xml) was not found or is inaccessible.
As per comments posted by you here: https://cn.forums.oracle.com/forums/thread.jspa?threadID=2326091
I checked FMW_SECURITY_SERVICE_URL parameter in the NQSConfig.ini file.
This parameter is using VIP (admin server listen to this) and not the actual IP of the server.
Should I change this URL and point it to actual IP.
What is the procedure to change this parameter using EM?

Obiee 11g error

Hi All,
I am using obiee 11g for a demo project.When i a run the a report just with 2 columns from 1 from dimension and 1 from fact.It is throwing an error.the error message is
Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail: .
I tried using foriegn key in bmm layer it is working fine.When i go for complexjoin bmm layer.The above error is coimng up.
Can anybody help me on this.
Thanks,
Chandra

can you try the following sequence for startup.
It is the method I use to start up servers. Before you complete the steps below the following Windows Services should **not** be running.
a. Oracle Process Manager (instance1)
b. Oracle Weblogic NodeManager
1) Start NodeManager from the Command Prompt
Cd <MIDDLEWARE_HOME>\wlserver_10.3\server\bin
startNodeManager.cmd
Wait till you see message "Secure socket listener start at port"
2) Start Admin server from command prompt
Cd <MIDDLEWARE_HOME>\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password, specify the user details that you have mentioned at the time of 11g install
Wait till you see message Admin server is in running mode.
3) Now start Managed server from GUI
Access WebLogic console from a browser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for Managed server to start. Wait till you see Running status.
4) Now start the OBIEE components from command prompt
Cd C:\OBIEE\instances\instance1\bin
opmnctl startall

Configure Smartview in OBIEE 11G error

Hello All
I am trying to integrate smartview with OBIEE 11G, I followed this blog on how to do it:
http://obieeil.blogspot.com/2013/07/obiee-creating-smart-view-connection.html
I am running into an issue and maybe you guys can help me understand how to solve it.
I have downloaded the smartview and I am in the process of creating my private connection..
Now from my laptop, I am able to access my OBIEE with this link:
http://100.20.000.000:9704/analytics/
In the private connection setting, when I entered this url and give username and password, then say 'connect', i am getting an error message simply 'Logon error!' and nothing else to it..
Have you seen this behavior before?
Please let me know what I should do about it

Oh it is you, garuda
changed name

Weblogic 11g Error

Hello ,
We are having an Spring based application which was running in weblogic 8.1 , we are migrating to weblogic 11g .
I created all the configurations in 11g as it was in 8.1 . But I am getting a set of errors as shown below while deploying the application.
Error while deploying
•     Substituted for missing class org.springframework.beans.FatalBeanException - Can't resolve reference to bean 'prixcarAdapter' while setting property 'messageHandler' on bean 'ftpAdapter';
•     nested exception is: org.springframework.beans.FatalBeanException: Can't resolve reference to bean 'prixcarGateway' while setting property 'gateway' on bean 'prixcarAdapter';
•     nested exception is: org.springframework.beans.FatalBeanException: Can't resolve reference to bean 'jmsPrixcarConnectionFactory' while setting property 'connectionFactory' on bean 'prixcarGateway';
•     nested exception is: org.springframework.beans.FatalBeanException: afterPropertiesSet() on bean with name 'jmsPrixcarConnectionFactory' threw exception;
•     nested exception is: javax.naming.NameNotFoundException: Unable to resolve 'PrixcarConnectionFactory'. Resolved ''; remaining name 'PrixcarConnectionFactory'
Log file error
The Message-Driven EJB: PRIXCAR_IMPORT_GATEWAY_QUEUE is unable to connect to the JMS destination: jms.PrixcarDamageQueue. The Error was: javax.naming.NameNotFoundException: Unable to resolve 'jms.PrixcarDamageQueue'. Resolved 'jms'; remaining name 'PrixcarDamageQueue' at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139) at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252) at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182) at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206) at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214) at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254) at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393) at javax.naming.InitialContext.lookup(InitialContext.java:392) at weblogic.jms.common.CDS$2.run(CDS.java:222) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:216) at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1295) at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1092) at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1324) at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:480) at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227) at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:415) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83) at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:75) at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:67) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409) at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java
In the spring xml I have configured the bean as shown below
<bean id="jmsPrixcarQueue" class="org.springframework.jndi.JndiObjectFactoryBean">
<property name="jndiName"><value>jms.PrixcarDamageQueue</value></property>
<property name="inContainer"><value>false</value></property>
</bean>
<bean id="jmsPrixcarConnectionFactory" class="org.springframework.jndi.JndiObjectFactoryBean">
<property name="jndiName"><value>jms.PrixcarConnectionFactory</value></property>
<property name="inContainer"><value>false</value></property>
</bean>
And in weblogic-ejb-jar.xml it is as shown below
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN"
"http://www.oracle.com/technology/weblogic/weblogic-ejb-jar/1.1/weblogic-ejb-jar.xsd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>PRIXCAR_IMPORT_GATEWAY_QUEUE</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>1</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>jms.PrixcarDamageQueue</destination-jndi-name>
</message-driven-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
I configured jms modules in weblogic 11g server console with the jndi names
jms.PrixcarDamageQueue
jms.PrixcarConnectionFactory
Please let us know the reason for this error also the doctype for 11g in weblogic-ejb-jar.xml above.
Edited by: user13295341 on Jun 15, 2010 5:21 AM

Jay and Maxence , I tried what you guys said by removing the jms. and using only PrixcarDamageQueue and PrixcarConnectionFactory but still I am getting an error like Namenotfound as shown below,
The Message-Driven EJB: PRIXCAR_IMPORT_GATEWAY_QUEUE is unable to connect to the JMS destination: PrixcarDamageQueue. The Error was: javax.naming.NameNotFoundException: Unable to resolve 'PrixcarDamageQueue'. Resolved ''; remaining name 'PrixcarDamageQueue' at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139) at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252) at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182) at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206) at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254) at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393) at javax.naming.InitialContext.lookup(InitialContext.java:392) at weblogic.jms.common.CDS$2.run(CDS.java:222) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:216) at
My doubt is will queue be displayed in JNDI tree ?? I mean there is a JNDI tree in weblogic admin screen and I am getting only the PrixcarConnectionFactory in that and not the PrixcarDamageQueue , may be thats why its showing "unable to connect to the JMS ???" Please advice.....
I changed both the xml's and the JNDI names in the admin screen.

Oracle BI 11g: Error at the step - "Creating BI Server System Components"

I am attempting to install Oracle BI 11g on a Windows VM. The installation process completes successfully. However, the configuration process errors out at the step - Creating BI Server System Components. The last entry in the install log is as below:
[2010-09-24T18:26:12.107+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 26] [ecid: 0000Ih3l5E00vlx6wBedMG1Cb79200000H,0] Install handler params :-componentName coreapplication_obis1 -componentType OracleBIServerComponent -biApplicationName coreapplication -fmwConfigPath C:\Middleware\user_projects\domains\bifoundation_domain\config\fmwconfig -appServerUsername <Secure value. Cannot be logged> -appServerPassword <Secure value. Cannot be logged> -appServerAdminPort 7001 -appServerManagedPort 9704 -systemAdministratorUsername <Secure value. Cannot be logged> -systemAdministratorPassword <Secure value. Cannot be logged> -repositoryPassword <Secure value. Cannot be logged> -biServerRepositoryFile SampleAppLite.rpd -biPresentationServicesCatalogName SampleAppLite -biPresentationServicesCatalogZipFileName SampleAppLiteCatalog.zip -biSchedulerSchemaUser <Secure value. Cannot be logged> -biSchedulerSchemaPassword <Secure value. Cannot be logged> -actionFrameworkWorkflowServer http://host-name:7001 -actionFrameworkWorkflowService ANALYTICS -actionFrameworkWorkflowSystem obiaftests -databaseType Microsoft SQL Server -connectString sqlservername:port:db -autoCreatePorts -biServerPort 9703 -biServerMonitorPort 9701 -biPresentationServerPort 9710 -biClusterControllerPort 9706 -biClusterControllerMonitorPort 9700 -biJavaHostPort 9810 -biSchedulerPort 9705 -biSchedulerMonitorPort 9708 -biSchedulerScriptRPCPort 9707 -portRangeStart 9700 -portRangeEnd 10000 -skipDomainProvisioning true
The resource utilization seems to be normal. Netstat confirms that all of the above ports are free. Since there is no explicit error message in the log, we are unable to decipher the exact source for this error.
Virtual Machine details: Intel Xeon @ 2.67 GHz, Windows Server 2003 SP2, 4GB RAM, 50GB HDD, Static IP
Oracle BI Schema DB: MS SQL Server
Any inputs on this error will be greatly appreciated.
Edited by: OBIGuy on Sep 27, 2010 2:37 PM

Hi,
I recenty started instaling OBIEE 11g and got the same error : "Creating BI server system components". I read your solution and would like to know that if this patch is okay to install on a Windows VM (win server 2003 EE, SP2). If yes, after rebooting, do we reinstall ?
I am also getting the following errors:
-Executing: opmnctl start coreapplication_obiccs1
-Executing: opmnctl start coreapplication_obis1
-Executing: opmnctl start coreapplication_obips1
-Executing: opmnctl start coreapplication_obisch1
Thanks in advance.
HG

JDeveloper 11g Errors Editing BPEL Database Adapter

I am encountering problems editing Database Adapters in a BPEL based Service Composite Application in JDeveloper. Specifically,
* double-clicking an existing Database Adapter component to view/edit it generates an uncaught exception in the GUI
* clicking Next through the wizard proceeds to the next step but the view showing the
SQL select criteria and input parameters doesn't return the original values set when the
adapter was first created -- a second NPE is logged at that time
Here are the specifics of what's running:
* host for JDeveloper is a Windows7 Home Premium 64-bit (version 61. build 7601 SP 1) PC with 8GB RAM
* JDeveloper 11.1.1.5 (the SOA / WebCenter version)
* the c:\OracleMW directory has JDK 6.0.24 installed
* the Windows machine does have Java EE JDK 7 installed but JDeveloper uses the JDK inside c:\OracleMW
* while running, JDeveloper is using around 274M of memory
* database hosting the SOA meta data store and the desired DB of the adapter is 11g (11.2.0.1.0)
* database is up, reachable and healthy while attempting to edit the Adapter component
Here is the exact error encountered and the stack trace:
GUI popup = An unexpected error has occurred in JDeveloper. The program may be unstable, which could result in data loss. Decide how you want to proceed and click OK.
Details = Uncaught exception
java.lang.NullPointerException
o.tip.tools.ide.adapters.designtime.adapter.xr.util.SQLRefresher.run(SQLRefresher.java:118)
j.lang.Thread.run(Thread.java:662)
If you click on ignore / continue and proceed through the steps of the Wizard, when the Define Selection Criteria step appears, the original criteria and input parameters defined when the adapter was first built are not displayed and the "Feedback - Log" tab in the log windows registers another entry of:
Previously reported error [NPE in o.tip.tools.ide.adapters.designtime.adapter.xr.util.SQLRefresher:118]
Also, if you go through the motions of adding a new parameter variable in the top section of the dialog, after clicking OK, the dialog DOES suddenly display the original variables defined as input parameters.
Thinking this is a symptom of JDeveloper trying to run in too little memory, I have attempted to increase the max memory setting of JDeveloper to 1024M by adding this line
AddVMOption -Xmx1024M
in
c:\OracleMW\JDeveloper\jdev\bin\jdev.conf
I've also tried adjusting that same setting in the config file for the IDE itself at
c:\OracleMW\JDeveloper\ide\bin\ide.conf
and get the same result. (Subsequent review of properties in About JDeveloper shows that JDeveloper uses the jdev.conf file, not the ide.conf file FWIW.) Memory really shouldn't be a problem because I'm still new to SOA style development and the "application" involved is a very simple "HelloSOA" type service that just sets a couple of BPEL variables, transforms some input variables into variables passed to this Database Adapter, does a few more Transform operations for the DB result values to the reply values and sends the reply.
However, one other sign that memory utilization could be contributing to this is that periodically, switching to the "Source" view of the composite.xml file or the BPEL process file will lock the GUI up for about 35 seconds with nothing happening. An obvious sign of garbage collection gettng triggered.
Any suggestions?

Oracle has identified a fix added to newer versions of JDeveloper which corrected these NullPointerException errors encountered using the 11.1.1.5 version of JDeveloper. That fix had not be propagated back to the 11.1.1.5 version but subsequently HAS been ported back. The fix is associated with patch ID 12670305 which can be downloaded from http://support.oracle.com by searching for that bug ID then downloading the associated ZIP file. I've applied the patch to JDeveloper 11.1.1.5 running on Windows7, Vista 32-bit and LINUX 64-bit and it works like a champ on all three platforms.

Sql*loader 11g - Error ORA-12899

Hi All,
I'm using Sqlload for inserti into a 11g db some csv file from db2.
My server is a Linux o.s. with Oracle 11.2.0.1.0 - 64bit.
I receive this error ORA-12899: Value too large for column on all file I try to load.
NLS for my db is:
SQL> select parameter, value from nls_database_parameters where parameter like '%CHARACTERSET%';
PARAMETER VALUE
NLS_CHARACTERSET AL32UTF8
NLS_NCHAR_CHARACTERSET UTF8
Have you any idea?
Thanks very much for help
Regards
Giovanni

In internet I found this short message:
“AL32UTF8 is a multi-byte characterset,that means some characters are stored in more than 1 character, that's true for these special characters.
If you have same table definitions in both databases you likely face error ORA-12899.
This metalink note discusses this problem, it's also applicable to sqlloader:
Import reports "ORA-12899: Value too large for column" when using BYTE semantic
Doc ID: Note:563893.1”
By metalink, I can see the Note linked to a one Oracle Internal Bug for Oracle 11g.....
I'm waiting you suggestion... thanks very much in advance.
Regards.
Giovanni

AWM 11g ERROR

Similar Messages

Maybe you are looking for