AWM - After successull cube maintainance data does not load
Hi All,
After creating the cube when i maintain the cube the data does not load. I went back and looked at the mapping at the cube level and the dimension level and everything looks fine. Any clues why the data does not get loaded. Also, i did not recieve any error while maintaing the cube.
thanks
Hi,
I was able to resolve this issue. I did not map the cube properly especially the time dimension. Due to this the data did not get loaded in the cube. ReMapping fixed the problem.
Hope this helps other newbies..
Similar Messages
-
Embedded Database - data does not load
Hello.
I am currently using NetBeans 6.5 and am experimenting with the CarsApp tutorial.
Whenever I create an application using the server database, the data loads automatically when the application starts.
However, when I create the application using an embedded database, the data does not load and I just get a blank table.
For more information, go to: http://forums.sun.com/thread.jspa?threadID=5366394&tstart=0
Thank you in advance!I'm sorry, I didn't know it was so looked down upon.
I thought that since this topic pertained to both Destop Applications and JDBC, I could get the best and quickest answer if I posted in both.
Apparently, that was a mistake.
Thanks, anyways! -
Page data does not load with goButton? (new window of identical page)
Hi guys. I ran into a problem. Essentially, I need to print a .jsff page but before I do, I have to alter its format a little bit. The solution I decided to use was to create a new .jspx page containing almost the exact same content. I even copied the data bindings and everything. Finally, I created a goButton on my original page like so:
<af:goButton text="Print as BOSSMON" destination="SubmitPrint.jspx?org.apache.myfaces.trinidad.agent.email=true"
targetFrame="_blank">
</af:goButton>This opens my page nicely in the format I want. But...there is no data on the page! It just opens a frame of the page. Can someone help me resolve this?
Otherwise, is there any other technique I could use to accomplish my goal?Hi guys. Thanks to everyone for their suggestions. I finally got a working solution, something totally different from the suggestions.
My goal was to print a .jsff page nicely. But before I could do that, I needed to modify some data on the page. I also wanted to do this in as few clicks as possible. I tried the goButton technique but the binding data would not load. I couldnt figure out why.
Nonetheless, I finally managed to make my own version (albeit, not that neat!). I accomplished this by essentially making a template which automatically opens in showprintablebehavior format. I tried to follow a bunch of online tutorials/blogs but nothing worked for me. Here are the steps I used:
1) Creating a new .jspx page.
2) Copy the entire source of the .jsff page (the one which needs to be printed) into our new template .jspx page. (do have to modify the beginning parts by adding <af:document> <af:form> etc)
3) Create a pageDef for the template page and copy the entire pageDef as well (do have to change the name of the pagedef)
4) Modify your print template to your liking.
5) Add a taskflow rule that links the original .jsff page to the new template page
6) Add a commandButton on the original .jsff page which opens this printing page in a new window (remember to use "dialog:....."). Here is mine:
<af:commandButton text="Open Printer Friendly Version" id="printer_popup" action="dialog:edit_print" useWindow="true"
windowEmbedStyle="window" inlineStyle="display:block;"
windowHeight="100" windowWidth="100">
</af:commandButton>7) Now, in the printing template page, add a command button which simply has the showprintablebehaviour tag within it as well as a client listener to invoke some javascript. Here is what I used:
<af:commandButton text="Printer Page" id="sha_print">
<af:clientListener method="do_loading" type="focus"/>
<af:showPrintablePageBehavior/>
</af:commandButton>8) In the beginning of this page, you will have an <af:document> tag. Modify it so it sets focus to our print button above when the page loads. Like so:
<af:document id="d2" initialFocusId="sha_print">9) Now add a resource tag to your page which has the "do_loading" javascript method.
<f:facet name="metaContainer">
<af:resource type="javascript">
function do_loading(event) {
var target = document.getElementById('sha_print');
target.click();
top.close();
//alert("got focus sir!");
</af:resource>
</f:facet>Thats it! What this does is when you click on the command button to open the printer template, our template page opens but as it opens, it automatically sets focus to the printer button using the document tag. The printer button has a listener which activates when it receives focus (in our case, as soon as the page loads). This listener invokes the javascript method, which progamatically clicks the printer button and closes this window. What your left with is a printer friendly page of your modified page!
All the data is present there too!
If anyone has any questions/comments, please do ask. -
About half the times that I have tried to access my bank online Firefox fails to find the server and claims the site is unavailable. Immediately afterwards Safari hooks up to the same site, without delay.
Why does Firefox fail so often, even when I keep my cache clear?
What can be done to repair this fault?Hi gregory,
It is a big subject, and the following article sets out various options.
http://www.macworld.com/article/1152611/remoteaccesintro.html -
After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.
Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved. -
Job Cancelled with an error "Data does not match the job def: Job terminat"
Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AMDear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid? -
Site does not load after some minutes of creation or after restart the server
Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, ConfiguringHi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring -
Background Job cancelling with error Data does not match the job definition
Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time Message text Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated BD 078 E
03:46:08 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Please help me in resolving this issue.
Thanks in advance,
Sai.hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode. -
Regarding "Data does not match the job definition; job terminated"
Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?Hi dharmendra
Good Day
How are you
I am facing the same problem which you have posted
By any chance have you got the soultion for this
If so please let me know the solution for this.
Thanks in advance.
Cheers
Vallabhaneni -
[Regression] KDE4 does not load anymore after recent kernel update.
Hi,
I have updated my system to latest packages and now KDE4 does not load. i get a Blank Screen.
I can't reach virtual terminals(I tried ALT+F1 to F11, but no response)
Control + ALT + BACKSPACE does not work.
even magic SysRq key(Alt+SysRq+REISUB) has no effect.
So I had to hard reset my machine. somehow I managed to get logs.
/var/log/Xorg.o
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 30 06:43:33 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.14 Wed May 27 01:53:56 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 01:30:19 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
/var/log/errors.log
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:54 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:09:04 moody kdm[4164]: X server startup timeout, terminating
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:40 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:50 moody kdm[4165]: X server startup timeout, terminating
Jul 30 06:44:15 moody kdm[4165]: X server for display :0 cannot be started, session disabled
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Looks like X server is not starting for some reason and this is the root cause of the problem.
Here is the list of Packages which were Updated
/var/log/pacman.log
[2009-07-25 07:36] synchronizing package lists
[2009-07-25 07:37] starting full system upgrade
[2009-07-25 10:03] synchronizing package lists
[2009-07-25 10:03] starting full system upgrade
[2009-07-25 10:07] upgraded boost (1.39.0-1 -> 1.39.0-2)
[2009-07-25 10:07] upgraded cups (1.3.10-3 -> 1.3.11-1)
[2009-07-25 10:07] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
[2009-07-25 10:07] upgraded dmapi (2.2.10-1 -> 2.2.10-2)
[2009-07-25 10:07] upgraded dri2proto (2.0-1 -> 2.1-1)
[2009-07-25 10:07] upgraded gcc-libs (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded gcc (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded hwdetect (2009.07-1 -> 2009.07-2)
[2009-07-25 10:08] upgraded kbd (1.15-1 -> 1.15-2)
[2009-07-25 10:08] >>> Updating module dependencies. Please wait ...
[2009-07-25 10:08] >>> MKINITCPIO SETUP
[2009-07-25 10:08] >>> ----------------
[2009-07-25 10:08] >>> If you use LVM2, Encrypted root or software RAID,
[2009-07-25 10:08] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-07-25 10:08] >>> More information about mkinitcpio setup can be found here:
[2009-07-25 10:08] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-07-25 10:08]
[2009-07-25 10:08] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-07-25 10:08] ==> Building image "default"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:08] :: Parsing hook [udev]
[2009-07-25 10:08] :: Parsing hook [autodetect]
[2009-07-25 10:08] :: Parsing hook [ide]
[2009-07-25 10:08] :: Parsing hook [scsi]
[2009-07-25 10:08] :: Parsing hook [sata]
[2009-07-25 10:08] :: Parsing hook [usb]
[2009-07-25 10:08] :: Parsing hook [usbinput]
[2009-07-25 10:08] :: Parsing hook [keymap]
[2009-07-25 10:08] :: Parsing hook [filesystems]
[2009-07-25 10:08] :: Generating module dependencies
[2009-07-25 10:08] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-07-25 10:08] ==> SUCCESS
[2009-07-25 10:08] ==> Building image "fallback"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:09] :: Parsing hook [udev]
[2009-07-25 10:09] :: Parsing hook [ide]
[2009-07-25 10:09] :: Parsing hook [scsi]
[2009-07-25 10:09] :: Parsing hook [sata]
[2009-07-25 10:09] :: Parsing hook [usb]
[2009-07-25 10:09] :: Parsing hook [usbinput]
[2009-07-25 10:09] :: Parsing hook [keymap]
[2009-07-25 10:09] :: Parsing hook [filesystems]
[2009-07-25 10:10] :: Generating module dependencies
[2009-07-25 10:10] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-07-25 10:10] ==> SUCCESS
[2009-07-25 10:10] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
[2009-07-25 10:10] upgraded lib32-libgl (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-libpng (1.2.37-1 -> 1.2.38-1)
[2009-07-25 10:10] upgraded lib32-mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded libtool (2.2.6a-2 -> 2.2.6a-3)
[2009-07-25 10:10] upgraded libv4l (0.5.99-1 -> 0.6.0-1)
[2009-07-25 10:10] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
[2009-07-25 10:10] upgraded mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded perl-html-parser (3.60-1 -> 3.61-1)
[2009-07-25 10:10] upgraded perl-libwww (5.825-1 -> 5.829-1)
[2009-07-25 10:10] upgraded qtcurve-gtk2 (0.65.3-1 -> 0.66.0-1)
[2009-07-25 10:10] upgraded qtcurve-kde4 (0.65.4-1 -> 0.66.1-1)
[2009-07-25 10:10] upgraded smplayer (0.6.7-1 -> 0.6.8-1)
[2009-07-25 10:10] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
System Config:
AMD Athlon 64 3000+
Archlinux 2.6.30.2 X86_64
KDE 4.2 Unstable
Nvidia Geforce 6200 Video card
please tell me how to get my desktop back.:)
Last edited by cool (2009-07-30 17:06:32)Installed the nvidia-beta driver from AUR. version:190.18. it crashed on me.
[code]____________________________________________
Start of NVIDIA bug report log file. Please include this file
when reporting a graphics driver bug via the nV News NVIDIA
Linux forum (see www.nvnews.net) or by sending email to
'[email protected]'.
nvidia-bug-report.sh Version: 3969188
Date: Sat Aug 1 18:50:38 PDT 2009
uname: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD GNU/Linux
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 18:30:08 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AllowEmptyInput" "off"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.18 Wed Jul 22 16:35:50 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 190.18 Wed Jul 22 15:47:48 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) Aug 01 18:30:10 NVIDIA(0): Enabling RENDER acceleration
(II) Aug 01 18:30:10 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Aug 01 18:30:10 NVIDIA(0): enabled.
(II) Aug 01 18:30:12 NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) Aug 01 18:30:12 NVIDIA(0): Memory: 131072 kBytes
(--) Aug 01 18:30:12 NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) Aug 01 18:30:12 NVIDIA(0): Detected AGP rate: 8X
(--) Aug 01 18:30:12 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Aug 01 18:30:12 NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) Aug 01 18:30:12 NVIDIA(0): Assigned Display Device: CRT-0
(II) Aug 01 18:30:12 NVIDIA(0): Validated modes:
(II) Aug 01 18:30:12 NVIDIA(0): "1280x1024+0+0"
(II) Aug 01 18:30:12 NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) Aug 01 18:30:12 NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) Aug 01 18:30:12 NVIDIA(0): option
(==) Aug 01 18:30:12 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Aug 01 18:30:12 NVIDIA(0): Failed to allocate GLX video capture device array.
(II) Aug 01 18:30:12 NVIDIA(0): Initialized AGP GART.
(II) Aug 01 18:30:12 NVIDIA(0): Setting mode "1280x1024+0+0"
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ee2e6]
1: /usr/bin/X(xf86SigHandler+0x6f) [0x47b1cf]
2: /lib/libc.so.6 [0x7f4b2a26cf90]
3: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000988X+0x23) [0x7f4b27067893]
4: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2702f988]
5: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv001911X+0x2e) [0x7f4b2707975e]
6: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b27075814]
7: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv002497X+0xaa) [0x7f4b27075faa]
8: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000979X+0x19d) [0x7f4b270503fd]
9: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2704cf69]
10: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272a9d88]
11: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272aa53e]
12: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2729b0bc]
13: /usr/bin/X(AddScreen+0x1d4) [0x433114]
14: /usr/bin/X(InitOutput+0x76f) [0x46e12f]
15: /usr/bin/X(main+0x1fe) [0x43381e]
16: /lib/libc.so.6(__libc_start_main+0xfd) [0x7f4b2a2599ed]
17: /usr/bin/X [0x432e59]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
Option "AllowEmptyInput" "off"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
ldd /usr/bin/glxinfo
linux-vdso.so.1 => (0x00007fff7bdff000)
libGL.so.1 => /usr/lib/libGL.so.1 (0x00007f02ea6dc000)
libm.so.6 => /lib/libm.so.6 (0x00007f02ea45a000)
libc.so.6 => /lib/libc.so.6 (0x00007f02ea107000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f02e9dcc000)
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0x00007f02e89a2000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0x00007f02ea9b8000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f02e8790000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f02e858c000)
/lib/ld-linux-x86-64.so.2 (0x00007f02ea8cb000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f02e8370000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f02e816e000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f02e7f69000)
/usr/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6200] (rev a2) (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
00: de 10 f3 00 07 00 b0 02 a2 00 00 03 00 f8 00 00
10: 00 00 00 f8 08 00 00 e0 00 00 00 f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01
40: 00 00 00 00 02 00 30 00 1b 0e 00 ff 02 03 00 1f
50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 80 00 00 01 04 40 c1 00 00 00 00
a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/usr/sbin/lspci -t
-[0000:00]-+-00.0
+-00.1
+-00.2
+-00.3
+-00.4
+-00.7
+-01.0-[0000:01]----00.0
+-0f.0
+-0f.1
+-10.0
+-10.1
+-10.2
+-10.3
+-10.4
+-11.0
+-11.5
+-12.0
+-18.0
+-18.1
+-18.2
\-18.3
/usr/sbin/dmidecode
# dmidecode 2.10
SMBIOS 2.3 present.
33 structures occupying 998 bytes.
Table at 0x000F0800.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 06/01/2005
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
UUID: Not Present
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 754
Type: Central Processor
Family: Athlon 64
Manufacturer: AMD
ID: C0 0F 00 00 FF FB 8B 07
Signature: Family 15, Model 12, Stepping 0
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: AMD Athlon(tm) 64 Processor 3000+
Voltage: 1.5 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket 754
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: None
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0015, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0016, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0018, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0019, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x001A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001C, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0019
Partition Width: 0
Handle 0x001D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x001B
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001F, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0020, DMI type 127, 4 bytes
End Of Table
/sbin/modinfo nvidia | grep vermagic
vermagic: 2.6.30-ARCH SMP preempt mod_unload
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log:
Aug 1 17:43:55 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009
Aug 1 18:26:08 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:26:08 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:26:08 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:26:08 moody kernel: NVRM: components have the same version.
Aug 1 18:27:04 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:27:04 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:27:04 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:27:04 moody kernel: NVRM: components have the same version.
Aug 1 18:29:30 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18 Wed Jul 22 15:36:09 PDT 2009
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
dmesg:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009
Command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CFFFF uncachable
D0000-D7FFF write-back
D8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 00F0000000 mask FFF8000000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003fff0000 (usable)
modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
modified: 000000003fff3000 - 0000000040000000 (ACPI data)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffff0000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000003fff0000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 10000-13000
RAMDISK: 37f00000 - 37fefc8d
ACPI: RSDP 00000000000f6b80 00014 (v00 VIAK8M)
ACPI: RSDT 000000003fff3040 0002C (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000003fff30c0 00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000003fff3180 04D34 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000003fff0000 00040
ACPI: APIC 000000003fff7f00 0005A (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 003fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082c0d0] TEXT DATA BSS ==> [0000200000 - 000082c0d0]
#3 [0037f00000 - 0037fefc8d] RAMDISK ==> [0037f00000 - 0037fefc8d]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [000082d000 - 000082d0b6] BRK ==> [000082d000 - 000082d0b6]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
found SMP MP-table at [ffff8800000f4b80] f4b80
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
DMA zone: 56 pages used for memmap
DMA zone: 1680 pages reserved
DMA zone: 2247 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254504 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff88000100a000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256751
Kernel command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 1999.604 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
Node 0: aperture @ f0000000 size 128 MB
Memory: 1024112k/1048512k available (3409k kernel code, 452k absent, 23372k reserved, 1239k data, 460k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.84 BogoMIPS (lpj=6665346)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Brought up 1 CPUs
Total of 1 processors activated (4000.84 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, ff70ffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [40000000, fcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (6) larger than NumElements count (3), truncated
[20090320]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007]
pci 0000:00:0f.0: reg 14 io port: [0xe100-0xe103]
pci 0000:00:0f.0: reg 18 io port: [0xe200-0xe207]
pci 0000:00:0f.0: reg 1c io port: [0xe300-0xe303]
pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:0f.0: reg 24 io port: [0xe500-0xe5ff]
pci 0000:00:0f.1: reg 20 io port: [0xe600-0xe60f]
pci 0000:00:10.0: reg 20 io port: [0xe700-0xe71f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfb000000-0xfb0000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0xeb00-0xebff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xec00-0xecff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xfb001000-0xfb0010ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfaffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 0: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0xdcc00-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
system 00:02: ioport range 0x4000-0x407f has been reserved
system 00:02: ioport range 0x5000-0x500f has been reserved
system 00:03: ioport range 0xb78-0xb7b has been reserved
system 00:03: ioport range 0xf78-0xf7b has been reserved
system 00:03: ioport range 0xa78-0xa7b has been reserved
system 00:03: ioport range 0xe78-0xe7b has been reserved
system 00:03: ioport range 0xbbc-0xbbf has been reserved
system 00:03: ioport range 0xfbc-0xfbf has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xf8000000-0xfaffffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfaffffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 959k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1249151352.183:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2003
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 460k freed
Uniform Multi-Platform E-IDE driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
VIA_IDE 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe600-0xe607
ide1: BM-DMA at 0xe608-0xe60f
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
Probing IDE interface ide1...
hdc: BENQ DVD DD DW1650, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 20
ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ide-cd driver 5.00
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb000000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e700
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e900
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ea00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
udev: starting version 141
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine: Broken BIOS detected, avoid_D3 enabled.
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1ec00, 00:11:09:06:18:c6, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa02a36a0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.2 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0447ec0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered -
Graph Data does not align with the axis label
Hi,
The graph data does not align with the axis label when
datetimeaxis is used.
http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
(in the using parseFunction property example) when you hover on the
line graph the values do not align on the labels. Is this a bug?
Can somebody help me with this.
Thank you,
Gautam.Hi All
Thanks for looking into it.
Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
But that change has not reflected in BW yet even after replicating datasource.
I hope i have made you all understand the situation.
Thanks for your help
Ishi -
ORA-23327: imported deferred rpc data does not match GLOBAL NAME of ..
Hi,
We took an export of a production database in Oracle 9i (9.2.0.7) and created a new database on a test server with Oracle 10g (10.1.0.5)
The original production database was called DC20 and our new test database is called SD20.
Looking at the logs after the import we're seeing this error:
"ORA-23327: imported deferred rpc data does not match GLOBAL NAME of importing db"
We've looked into it a little and it seems to make sense because the names of the databases are different, and from what we've read, we really didn't need to do a full import including SYSTEM anyway. We also came across a solution telling us:
"If you are not using Replication on the target database, these errors can be ignored. However, you should subsequently remove all the replication objects by running:
$ORACLE_HOME/rdbms/admin/catrepr.sql, then catproc.sql"
What I was wondering was if someone could validate that running these scripts and ignoring the errors will be ok, or if they'll cause us issues further down the line.
In case its needed, heres my Export parameter file
"FULL=Y
DIRECT=Y
LOG=E:\Exports\DC20\Log\expDC20.LOG
FILE=E:\Exports\DC20\Data\DC20.DMP"
and heres my Import parameter file
"FULL=Y
COMMIT=Y
GRANTS=N
IGNORE=Y
BUFFER=500000
FILE=E:\Imports\SD20\data\SD20.dmp
LOG=E:\imports\SD20\log\impSD20.LOG"
Thanks for your help!Thanks Neil, we did already see this note and added it to our list of possible solutions. After we found this one, we also found the one I quoted, which would seem to be the path of least resistance (it would save a good 10 hours in import time if nothing else).
However, if we can't do what I'm asking about in my original post however, the note you mentioned will be our next route.. -
Stock for required data does not exist during repack of product
Hello,
I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
"Stock for required data does not exist
Message no. /SCWM/L3104"
After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
All the best,
Claudiu MaximHello Sridhar,
Thanks for the response, the packing operation in our case is done in the SCM EWM environment in the specific Work Center. The transaction with which we pack is /SCWM/PACK - Packing - General. Do you have a solution for this problem with regards to the EWM environment?
All the best,
Claudiu Maxim -
Number range object for characterstic DATE does not exist
When I am trying to load data from ODS to cube getting below error message.
"Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
In update rules we are trying to convert this date Infoobject(Char) into Key figure.
If anyone had exp with similar issue please reply.
Thanks in advance
VaniHi Vani,
Is ZEXTDATE Characteristic have any data in it? Can you check once.
Veerendra. -
Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. BoGet a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.
Maybe you are looking for
-
I have enabled both the traces 1204 and 1222 in sql server 2008 but not able to capture deadlocks
In Application error: 2014-09-06 12:04:10,140 ERROR [org.apache.catalina.core.ContainerBase] Servlet.service() for servlet DoMethod threw exception javax.servlet.ServletException: java.lang.Exception: [ErrorCode] 0010 [ServerError] [DM_SESSION_E_DEAD
-
How to return a pdf (iText) file using Portlet?
Dear all, I want to know how to return a pdf file using iText API via Portlet. I can manage to return a pdf file through a standalone servlet, but I don't have idea of how to generate a pdf file via Portlet. Can anyone help me? Thanks George (HK) Wel
-
Error opening PDF files through BI Publisher
I'm using Adobe Reader through BI Publisher to display PDF files. Problem is, from yesterday whenever I try to open a file I get the message: file does not begin with '%PDF-' Other users have no problems opening the same file, all users are connectin
-
Hi, I was wondering if anyone can help me with a problem I'm having. I have a Thinkpad X230i laptop which is used in a docking station. The monitor is plugged into the docking station using the VGA port. There seems to be a slight issue with the lapt
-
Silent Uninstall of System Update
Using the new System Center Configuration Manager 2012, you can now specify programs that supersede other programs. I am trying to specify that System Update 4.03.0012 supersedes 4.03.0007. To do this, however, I need to add the silent uninstallati