AWM hangs after OBIEE metadata export

Hi All ,
Does anyone face the problem of AWM hangs after OBIEE metadata export using AWM 11.2.0.2A ?
It was not previously hanged but now when I try to copy the UDML in clipboard after that the screen hangs. Any reason for that ?
Also I can see the UDML not copied from the clipboard and showing can not paste object from clipboard and after executing thorugh nQUDMLexec I can't figure out the issue as it is reffering some dimension Hierarchy attribute name not found while the same is present under AWM and I can view the data.
Not sure what's going on ..
Thanks,
DxP

Please be sure that you are using the very latest OBIEE plug-in
which is 11.2.0.2.0A - Revision 1. You can get it from the following link:
http://www.oracle.com/technetwork/database/options/olap/olap-downloads-098860.html
The hang issue is likely due to the plug-in falling over with a nullPointerException.
Are you running this against an 11.1.0.7 rdbms? There was a bug that would cause the
11.2.0.2.0A plug-in to fall over against an 11.1.0.7 rdbms which has been fixed with the
latest OBIEE plug-in as above.
Let me know how you do with the very latest OBIEE plug-in.
David

Similar Messages

Deployment hangs after importing metadata OWB 10gR2

Hi folks,
in development I created a new mapping with I exported/imported into test enviroment.
I did this using "import all objects, update metadata, match by UID".
When I try to deploy the imported mapping ControlCenter hangs showing the green arrow.
In the DOS box where I started the client it says:
</OBJECT>
</OBJECT>
</OBJECT>
</NAMESPACE>
RUNTIME_SERVICES_DEBUG [WhValidationGenerationTransaction] DeploymentUtils.isAda
pterFCO(WBGeneratedObject): Not found objectTypeName CMPMap defaulting to FCO
RUNTIME_SERVICES_DEBUG [WhValidationGenerationTransaction] DeploymentSpecificati
onImpl.addToUnitSpecificationImplArrayList: created UnitSpecification for Deploy
mentAdapterName DDLDeployment StoreUOID= 9B7415EC7AB94F54824DF5F57D502828 Action
= 1 FCO list= M_FUNDSTRUCT_DWH,
Runtime Parameters for : M_FUNDSTRUCT_DWH
SYSTEM: DEFAULT_OPERATING_MODE: SET_BASED_FAIL_OVER_TO_ROW_BASED
SYSTEM: DEFAULT_AUDIT_LEVEL: ERROR_DETAILS
SYSTEM: MAXIMUM_NUMBER_OF_ERRORS: 50
SYSTEM: COMMIT_FREQUENCY: 1000
SYSTEM: BULK_SIZE: 1000
SYSTEM: DEFAULT_PURGE_GROUP: WB
SYSTEM: ANALYZE_TABLE_SAMPLE_PERCENTAGE: 5
RUNTIME_SERVICES_DEBUG [WhValidationGenerationTransaction] ExecutionUtils.decode
SystemParameter: Unexpected parameter ANALYZE_TABLE_SAMPLE_PERCENTAGE
Notification (Unit): start VEVA_LOCATION (Erstellen) - 0 (Adapter=DDLDeployment
Location=VEVA_LOCATION)
MEM:GenerationValidationService:internalCompile:after transaction:U: 65237816%IN
CR:2538296:INCREASE
What is the problem?
Michael

The error is due to the corrupted MDL file. MDL is getting corrupted because there is not enough memory for java VM. To fix the MDL corruption increase memory parameters.
1. On client PC: XXXX\owb\bin\win32\owbclient.bat change
java -Xms64M -Xmx768M -Dlimit=768M -XX:MaxPermSize=256M
to
java -Xms64M -Xmx1024M -Dlimit=1024M -XX:MaxPermSize=512M
Restart client session.
It did fix the problem in my case.
Oracle also recommends changing memory parameters on the server side (UNIX in my case)
2.On server side XXXX/owb/bin/unix/run_service.sh
$JAVAPATH/bin/java -Xmx768M
to
$JAVAPATH/bin/java -Xmx1024M

Aperture 3 Hanging after upgrade and possible solution

In advance, sorry for the long post:
As many have reported already, I was also a user of Aperture staring at the beachball and finding my computer hanging completely up to the point I was ready to give it flight lessons for free. I might have done this to my MacBook Pro if I was not leaving for an overland trip to Capetown from the Netherlands in a Toyota Land Cruiser in 2 days. If you want to read about the trip: www.africaminded.com.
How did I solve the issue in my case? I hope it helps some of you.
*My aperture setup*
Before you go through all the steps below let me explain how my Aperture workflow was set up:
1. Projects in Aperture correspond to folders on my harddrives. The project folders in Aperture contain reference files to the fils on my harddrives. The folders on my harddrives have the same name as the projects in Aperture. Using the same name does not really matter much, except I find it easier to find images from aperture back on my harddrive without having to use aperture to find the images.
2. I do not have the images imported into an Aperture library because this alllows me to access the images with other applications than Aperture (Photoshop etc).
Preparations:
*Actions I took before I started with a clean Aperture:*
1. Launch Aperture with holding the shift key. This defers Aperture from processing images in the library. Tip from Apple website: http://support.apple.com/kb/HT3805
2. Show Keywords HUD and export the keyword list in a separate file onto the desktop
3. Create folder on desktop called "Exported Projects"
4. Drag project by project to the just created folder. Yes this is a painstaking long process and one I would have liked avoided but I did not find any other solution and needed one. Luckily I only had 44 projects to go through.
5. Close Aperture
6. Delete the user preferences
1. Quit Aperture if still running.
2. In the Finder go to ~/Library/Preferences. (The tilde "~" represents your Home folder).
3. Remove the "com.apple.Aperture.plist" file from the Preferences folder.
7. Move the user created presets, keyword lists, and so on...
1. Quit Aperture.
2. In the Finder, go to ~/Library/Application Support/Aperture.
3. Move the contents of this folder to your Desktop
8. Delete your old Aperture Library or move it to another harddrive. If possible do not empty the bin of your computer (just in case you need the library again - I did not after following all steps below).
9. Reinstall Aperture; Note: Make sure that you have your installation discs nearby before starting this.
1. Open the Applications folder.
2. Drag the Aperture application to the Trash.
3. Insert your Aperture installation disc and install Aperture.
4. When finished, choose Software Update from the Apple () menu to update your software to the latest version.
*Now your computer has a clean install of Aperture*
1. Launch Aperture
2. Show Keywords HUD and import the keyword list that you saved in a separate file on the desktop
3. Move the following files back into ~/Library/Application Support/Aperture:
1. Adjustment Chain Presets.plist
2. FileNamingPresets.plist
3. Metadata Presets.plist
4. MetadataSets.plist
4. Close Aperture and go to
Following the steps below allows you to keep all you metadata and rating as well. It is possible in Aperture 3 to read and import sidecar files containing metadata but this will not include the rating! So if you want to keep your metadata and your ratings, follow the steps below:
(*A) Importing Project*s
1. Launch aperture
2. File > Import >Library / Project
3. After selecting the exported project you want to import, confirm you want to merge the project
4. Which library should be used when a conflict is detected? Choose current library (and not the library/project you are importing).
5. Let Aperture take its time to merge the projects (depending on the size of the project you import this can take longer and you might see the famous beach ball for a few seconds). In the beginning it will look like Aperture does nothing or hangs again.
6. After merging the libraries are completed Close Aperture.
7. Launch Aperture and immediately select Window > Show Activity from the menu. Let Aperture process new previews (this should start automatically after opening Aperture). Show activity will give you an idea how far Aperture is when processing the images so you don't have to stress and stare at the spinning wheel in the bottom left corner.
8. After the processing has finished Close Aperture again to save the new previews and share them with iLife and iWork.
9. Repeat the above until you have imported all your projects. Remember to keep repeating step 6 to 9. This allows you to find out which project contains corrupted images or is corrupt and to deal with it separately. Importing all projects at the same time and then processing all pictures at the same time does not give you the opportunity to figure out how to get rid of the beachball!
*(B) What to do when images are corrupted in a project?*
In case you imported a project that was corrupted or contains corrupted images that causes Aperture to hang completely and slow down your computer to a complete halt:
1. Force quit aperture
2. Reopen aperture and immediately press the shift key after launching the program. Pressing the shift key stops Aperture from rendering/processing the images you imported from the "corrupted project".
3. Select the last imported projected (the one that contains 1 or several corrupted images and gave you the beachball again).
4. Delete the project and empty the trash in Aperture as well. Do not delete the master files associated with you referenced images.
5. Move the corrupted project into a folder called "Corrupted projects". Do not throw the corrupted project away - we will deal with this one later. Just make sure they are not part of the main library you are building.
6. Quit and launch aperture. Aperture should not be processing any images anymore as you already completed that with step 8 above.
7. Complete the importing of your projects following the exact steps above, skipping the corrupted project.
Ps. In my case I found 1 project with corrupted images.
*(C) What do you do with the corrupted projects?*
1. Make sure that Aperture is not yet running.
2. Double click the corrupted project and press the shift key to defer the processing of images. This will launch aperture and treat the project as an individual library.
3. Select all thumbnails and export masters to a new folder and select "Create IPTC4XMP Sidecar File" in the pulldown list where it says "Metadata" in the export window. You should now have all master images of this corrupted project and the sidecar files containing the metadata of these images in the same folder.
4. Quit Aperture
5. Press the Alt-Key/Option-Key and Launch Aperture. Aperture should now ask you which library you want to open. Select your Main Library that contains all the projects you imported following step 1-9 above.
6. Create a new project for the images you are going to import from step 3 of section C.
7. Import the images and move them to where you want them to have. Aperture should import the non-corrupted images including their metadata (as the sidecar file of these images is in the same folder as the images). All you have lost in this case is the rating and possibly the adjustment of these images. The IPTC data will be imported by Aperture in step 9 Section C. You could survive having to redo the rating manually. Redoing the adjustments is a bit of more work, sorry.
8. Quit Aperture.
9. Launch Aperture with pressing the alt-key or option-key and select your main library as in step 5 and select "Show Activity" from the menu. You are now back into step 7 of section A. Complete step7, step 8 and 9 of section A.
*D. Congrats*
1. When all projects have imported correctly delete the projects from your harddrive to gain space.
2. Delete the temporary Aperture library created in section C step 2.
3. Re-install plug ins that you might have moved in the preparation phase (if possible 64-bit versions if available)
Congrats. You now have a completely new and well functioning new Aperture 3 library that offers you all the new features and is very fast I should say. My machine: MacBook Pro 2.93GHz with 4GB Ram.
After you think you can trust Aperture again empty your bin to gain space on your computer.
How long did this take me? All in all about 3 days but not full time luckily. How many real corrupted images? None - something else in the project data was messing everything up.

WOW!
I'm REALLY impressed by your exhaustive and detailled description!
How long did it take to write? Sure longer than the import itself...
Thank you so much. I got a working import of Ap2 lib before but your description have me various hints for handling problematic or faulty projects.
Matt

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
 Severity:1
 Type:PKN3saw9ExceptionE
 File:saxreader.cpp
 Line:681
 Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PM

Problem solved!!
 
See this part of the query:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if; 
 
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:ASSOCIAT '; 
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if;

Iphoto hangs after upgrading to Yosemite and latest iPhoto version

It tells me the library needs upgrading, and starts to search the library. The progress bar suggests something is happening then hangs after about 99% completion. I have had to force close twice after several hours stuck at that point and then start the whole process from scratch when I restart.

Have you followed these instructions - http://www.fatcatsoftware.com/iplm/Help/rebuilding%20a%20corrupted%20iphoto%20li brary.html
iPhoto Library Manager > Help > Rebuilding a corrupted iPhoto library
Printable help
Rebuilding a corrupted iPhoto library
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its library data files. Note that iPhoto also has a built-in rebuild function that can be sometimes be used to repair a corrupted library database. You can find instructions on how to use that on Apple's website at http://support.apple.com/kb/HT2638 (iPhoto 6 or later) or http://support.apple.com/kb/HT2042 (iPhoto 5 or earlier).
iPhoto Library Manager's rebuild works differently, in that instead of trying to repair the library in place, it creates a brand new library and tries to reimport the entire contents of the original library into the new one, including reconstructing albums, photo metadata, etc. Note that rebuilding a library has all the same limitations as other photo transfer operations as far as what can and can't be copied between libraries. Also, depending on how badly damaged the library is, iPhoto Library Manager may or may not be able to piece together some or all of the library metadata.
To start a rebuild, select the library you would like to rebuild, then choose the "Rebuild Library" item from the "Library" menu. You will be prompted to choose a location for the rebuilt library, and whether or not you want iPLM to scavenge orphaned photos it finds in the library package. Once you've made your choices, iPLM will examine the library and rebuild the library structure and photos as best it can, then display you a preview of what it was able to find. If your library is badly damaged and the preview is missing a lot of content from the original library, this can save you from going through with a rebuild that won’t end up being of much help.
Once you've had a chance to examine the preview, if you want to go forward and create the rebuilt library, click the "Rebuild" button in the upper right. iPhoto Library Manager will create a new library and start importing the contents of the original library into the new one.
Scavenging photos
In some cases, either the iPhoto library database is too damaged for iPhoto Library Manager to be able to salvage any information from it, or the library data is incomplete and there are photos that still exist inside the library package, but iPhoto has lost track of them. In these cases, you may want to check the "Scavenge orphaned photos" checkbox when choosing a location for the rebuilt library. After iPhoto Library Manager has read the library data as best it can, it will perform an additional pass through the package and locate any photos that are no longer referenced in the library database. Any additional photos that are found will be included in the rebuild, and a new "Scavenged Photos" album will be created in the rebuilt library containing any scavenged photos.
LN

Oracle 11g R2 client installation on Windows 7 64 bit hangs after performing prerequisite checks

Windows 7 Professional SP1 64bit OS
6 GB RAM
380 GB free space
Extracted client to C:\Stage\win64_11gR2_client\client
Ran setup.exe as administrator, but the installation always hangs after step 5 of 7 is completed (Perform Prerequisite checks). Install log ends with entry "INFO: Get view named [SummaryUI]"
What am I missing here? Any help would be greatly appreciated.
C:\Stage\win64_11gR2_client\client>dir
Directory of C:\Stage\win64_11gR2_client\client
06/15/2013 02:56 PM <DIR> .
06/15/2013 02:56 PM <DIR> ..
06/15/2013 02:56 PM <DIR> doc
06/15/2013 02:56 PM <DIR> install
06/15/2013 02:56 PM <DIR> response
06/15/2013 02:55 PM 341,304 setup.exe
06/15/2013 02:55 PM 56 setup.ini
06/15/2013 02:59 PM <DIR> stage
06/15/2013 02:55 PM 4,327 welcome.html
 3 File(s) 345,687 bytes
 6 Dir(s) 412,474,404,864 bytes free
Last few lines of install log:
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@75f0f8ff
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from c:\Stage\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Temp\OraInstall2013-06-17_02-55-15PM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\APPS\PuTTY\;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]e4b
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: PN-PC:C:\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:5.9491GB (6238064.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: PN-PC:C:\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:130MB
INFO: Actual Value:384.1495GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:1023
INFO: Actual Value:369
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

Yes, I've tried using the -jreLoc option but it doesn't seem to like the path.
Version 6.0.200.2 is at C:\Program Files (x86)\Java\jre6\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\Program Files (x86)\Java\jre6"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 . Actual 4294967296 Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_04-47-16PM. Please wait ...
The Java RunTime Environment was not found at "C:\Program Files (x86)\Java\jre6"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again
I downloaded a newer version to C:\APPS\Java thinking the space in the path for Program Files (x86) might be a problem, but that also fails with the same error message
Version 7.0.210.11 is at C:\APPS\Java\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\APPS\Java\"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 . Actual 4294967296 Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_05-09-13PM. Please wait ...
The Java RunTime Environment was not found at C:APPS\Java"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again

IMovie Hangs After Full Quality Sharing Is Complete

Hi,
Why does this happen? I did a Full Quality Share on a 2-1/2 hour multi-clip movie (using Share Selected Clips Only). The export progress dialog hung after the export was clearly finished. I eventually had to Force Quit iMovie.
The exported movie looks fine in QT Pro. However, Movie Properties in QT shows that this movie is 24 frames longer than what I exported from iMovie. Doesn't seem to be a big deal, but annoying nonetheless.
I'm more concerned about iMovie hanging after a long movie export as described.

2-1/2 hour multi-clip movie (using Share Selected Clips Only)
so, your project is in timeline even longer then 150min? how much did you import into iM, to create such a "beast"? must be a gigantic project, hm?... Titanic II... ;-))
iM is a consumer product, we do read of reports here, that from some point of size (imported data, length, complexity of project), iM is a little "overwhelmed..." esp., iM is part of iLife, meaning, mainly meant exports go to tape (=60min max.) or iDVD (120min max.)
secondly, MacOsX is a UNIX system, which makes excessive use of socalled temp-files on (startup-) harddrive... it is recommended, not to overcrowd the drive 80 - 90% of max.
probably, your ~35GB of data transfer from a ~60GB project was simply too much for your Mac?
helpful?

Metadata export/import to other BI tools?

Metadata export/import to other BI tools?
Hi ,
I am using SQL DM 3.0.0.665. I need your thoughs on following.
As we build our logical/physical models in SQL data Modeler, we create our metadata for our attributes/columns.
After creating our physical model, other BI and reporting tools acquire access to the physical tables. Each tool has a process of creating their reporting layer and able to bring the tables/columns into reporting layer. It shows the column names as it is. It is not business friendly.
Do we have a mechanism to export attribute business names as meta data of DB tables?
If we define the meta data as part of physical model using modeling tools such as Oracle SQL Developer or ERWIN, will we able to import those into BI tools as report elements meta data?
Where can I find details?
How do we do that?
Thanks in helping us out.

Hi,
there is no problem if you are building reports on top of our reporting repository - table DMRS_MAPPINGS holds information for pairs - (entity- table), (attribute-column)...., and you can take implementation and business name.
Exchange to BI tools - you need to know how particular BI tool can recognize and link implementation and business names and then you can use transformation script in order to provide required information. There are examples on this forum how to deal with files and database connection using transformation script.
Philip

Why will After Effects not export to Media Encoder?

After Effects cannot export to Media Encoder. I've tried to queue it within After Effects (nothing happens,) I've tried to import it from within Media Encoder (it hangs on a loading dialogue forever,) and I've tried restarting my computer. All to no avail. I've also tried multiple AE projects. And yes, I've made sure I am viewing the queue in Media Encoder. Any clues?

Ok.
Running Adobe Creative Cloud, latest versions on both After Effects and Media Encoder. As for render settings, I never get to that part. When I export to render in Media Encoder, nothing happens. Here are the settings for one of the compositions and projects I was trying to export:

Transportable tablespace (metadata export with READ WRITE tablespace set)

Is it possible to use transportable tablespace backup for import if data files for tablespace set has been copied when tablespaces were READ ONLY but the metadata export (or a part of it) is taken after tablespaces has been set to READ WRITE?

Actually the size of datafile(s) are too huge so unable to test the same on test box with TTS export backup.
But my question is if there were no structural changes (DML might be there on tablespace objects) even after making tablespaces to READ WRITE till the time metadata export is completed(data files are copied to staging location already before tablespaces has been set READ WRITE), Shall I use these backup for import?

Satellite U400-22n and Win7 - screen hangs after 5 min

Hi, This is my first post
Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.

hi Mather,
any bluescreens visible?
win7 32bit i guess...
you have to install all the drivers for win7 provided by toshiba in the right order!
first chipset and patchfiles if available...
i think a clean install will do the job!
make sure that the hdd is error free!
you can upgrade from vista 32bit to win7 32bit
but no chance to upgrade to a win7 64bit when a vista 32bit is installed...

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

Question about the Before/After/Test metadata tags

i think that i have read all of the appropriate sections on the wiki but i am a little unclear on how/when i need to add extra info to the Before/After/Test metadata tags.
thus far, i have not done any unit tests that require a component to be added to the display list. i was reading the section on how to do that and i see that all of the above mentioned tags have extra info:
[Before( async, ui )], [After( async, ui )] and [Test( async, ui )]
what do those do and when/why do i need to use them?
thanks
additionally, i am trying to run this simple example derived from what's on the wiki and it always times out.
package HM.FO.User {
import mx.controls.Button;
import mx.events.FlexEvent;
import org.flexunit.Assert;
import org.flexunit.async.Async;
import org.fluint.uiImpersonation.UIImpersonator;
public class UserWindowPresenterTest {
//protected var window:UserWindow;
protected var button:Button;
[Before( async, ui )] public function setUp():void {
//this.window = new UserWindow();
this.button = new Button();
//Async.proceedOnEvent( this, this.window, FlexEvent.CREATION_COMPLETE, 20000 );
Async.proceedOnEvent( this, this.button, FlexEvent.CREATION_COMPLETE, 20000 );
//UIImpersonator.addChild( this.window );
UIImpersonator.addChild( this.button );
[Before( async, ui )] public function tearDown():void {
//UIImpersonator.removeChild( this.window );
//this.window = null;
UIImpersonator.removeChild( this.button );
this.button = null;
[Test( async, ui )] public function on_user_saved_clears_password_fields():void {
// this.window.pass_txt.text = "foo";
// this.window.pass_confirm_text.text = "bar";
// var presenter:UserWindowPresenter = this.window.presenter as UserWindowPresenter;
// presenter.on_user_saved( null );
// Assert.assertNull( this.window.pass_txt.text );
// Assert.assertNull( this.window.pass_confirm_text.text );
Assert.assertTrue( true );

Okay, so the async modified is used to indicate that the asynchronous statement will be used.
There is a bit of overhead adding async to tests, so, we don't actually instantiate the code that handles Async unless the async attribute is in the Before, After or Test. If you don't place the async in these tags [Test(async)] and attempt to use the async code. Async.whatever... you will get an error.
Regarding the ui, attribute, the same concept was intended to apply for ui elements... in other words we wouldn't build the necessary infrastructure.. that is an optimization and right now is not in play. so you will not see different behavior with or without the ui.
If I copy your code directly from below and paste it in my environment it passes.
Mike

Powerbook G4 hangs after few minutes of usage

Since February 06 I have a PB G4: 1.67GHZ, model Powerbook5,8
Since this weekend it hangs after a few minutes of usage.
I tried a whole load of possible solutions, like resetting the RAM, removing the battery and holding the powerbutton for 5 seconds...I even held it once for half a minute, but that didn't help. Checking the harddrive with disk utility (tried it often, but only once did the PB work long enough to get the end result: hard drive is healthy).
Often, when it hangs, I can get it to work by simply turning it off and on again. That gives me another window of 2 minutes of usage! Handy throughout the day when I need a file, or a document: I simply boot the machine, get the file and shut it down.
Carbon copy to an external HD does not work: the system hangs a few minutes after copying.
I installed a utility named applejack, and the first time I tried it, I got an interesting error: there were errors with the USB controller or USB bus, and system hangs. I didn't make a screenshot so this is out of the top of my head.
This was interesting because when I tried to make a HD copy (and believe me: I tried lots and lots of times), the system freezes first, and then an error about not unmounting a device popped into the screen. As if the touchpad, keyboards, and all other i/o devices stop working, and the system goes on for a few seconds more.
Sometimes the system just hangs, sometimes I get that black kernel panic screen.
Just before writing this, I tried the hardware test on the install CD once more:
Held down the option key, chose the hardware test -> quick test and..
system hangs after completion of the test
A message appeared in the bottom-left corner. Several lines of information, starting with:
"ERROR, Write to location ZERO detected!!, Loc zero was originally zero
Current File: Localization/en/Scripts/enAHTscript.sc"
etc
I live on a nice island in the Caribbean, so popping into the nearest Apple store means getting on a flight to Miami first.
What -if any- are my options? Is there something I can try to do myself before shipping it to Apple? Opening the case, checking this or that?
By the way, I originally posted this in the Titanium folder, but someone mentioned that I might actually have a Aluminum PB.
see http://discussions.apple.com/message.jspa?messageID=2074854#2074854

hi joeuu,
I have 1.5GB mem: one 512 stick and one 1GB and I already tried the sticks one at a time: it hangs with the original 512, it hangs with the 1GB and it hangs with them together in both possible slot settings.
I managed to copy the panic.log in /Library/Logs/ and here it is:
Fri Apr 7 15:27:21 2006
panic(cpu 0 caller 0x000A8D00): Uncorrectable machine check: pc = 00000000000AF340, msr = 0000000000141020, dsisr = 42000000, dar = 000000000280C200
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8D00 0x000A7F90 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x41381A00)
PC=0x000AF340; MSR=0x00141020; DAR=0x0280C200; DSISR=0x42000000; LR=0x000AF158; R1=0x2211B8E0; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x404E9F24 0x404E1F6C 0x404E7B2C 0x002CEFB8 0x41C3F2C8 0x002BC0E8
0x002CDA70 0x002BC690 0x002BBB4C 0x002BBA5C 0x404E3954 0x404E3B98 0x002CE900 0x002CD7C8
0x000A9814
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBTrackpad(1.3.0f1)@0x41c3d000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOHIDFamily(1.4.3)@0x32671000
com.apple.driver.AppleUSBOHCI(2.2.5)@0x404df000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x323bf000
Exception state (sv=0x402ABA00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj~1/RELEASE_PPC
Now what can we read from this?
I see in here "AppleUSBTrackpad" and "AppleUSBOHCI".
Referring to my original post: I have seen an error (a few days ago, when working with applejack) that also mentioned USB.
I'm very afraid that this is a hardware issue. Reading through some other posts, I saw something about a ribbon that gave problems. What are your thoughts?

Database hangs after retrieving some records....

hi,
I create a two level B+-tree index, for the first level i'm using key as logical database name, for the second level B+-tree i'm using some other field in my data. I am retrieving the records based on logical database name. I am using C++ to implement my index.
In the following code i'm retrieving records from database. Program is behaving differently for different logical database names. For example in my database i have around 4 lakhs records with logical database name 'A' and around 1 lakh of records with logical database name 'B'. The following code displays all B records but programs hangs after retrieving some A records.
I'm using PAGE_SIZE=8192, numBuffers=2048, and runnig in Fedora Core3.
DbEnv myEnv(0);
 myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
 myEnv.set_data_dir("/home/raviov/new/database");
 try {
 myEnv.open("./", DB_CREATE | DB_INIT_MPOOL, 0);
 catch (DbException &e) {
 cerr << "Exception occurred: " << e.what() << endl;
 exit(1);
 db=new Db(&myEnv,0);
 db->set_pagesize(PAGE_SIZE);
 db->set_bt_compare(compare_int);
 dbname=itoa(p);
 try
 db->open(NULL,
 "treedb.db",
 dbname,
 DB_BTREE,
 0,
 0);
 catch(DbException &e)
 cerr << "Failed to open DB object" << endl;
 exit(1);
 db->cursor(NULL,&cursorp,0);
 key=new Dbt();
 data=new Dbt();
 while(ret=(cursorp->get(key,data,DB_NEXT))==0)
 j=*((int*)key->get_data());
 q=(*((struct tuple*)data->get_data())).startPos;
 r=(*((struct tuple*)data->get_data())).endPos;
 s=(*((struct tuple*)data->get_data())).level;
 cout<<"position : "<<j<<"\t";
 cout<<"start : "<<q<<"\t";
 cout<<"end : "<<r<<"\t";
 cout<<"level : "<<s<<"\n";
 if(ret==DB_NOTFOUND)
 cout<<"no records";
 exit(1);
 if(cursorp!=NULL)
 cursorp->close();
 try
 db->close(0);
 catch(DbException &e)
 cerr << "Failed to close DB object" << endl;
 exit(1);
 myEnv.close(0);

HI Andrei,
thank you for giving reply, I'm not using any secondary indecies, subdatabases and not using any threads.
the following code displays index...
#include <stdio.h>
#include <db_cxx.h>
#include <iostream.h>
#include <db.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
int PAGE_SIZE=8192;
int numBuffers=2048;
char *itoa(const int x)
 char buf[100];
 snprintf(buf, sizeof(buf), "%d", x);
 return strdup(buf);
int compare_int(Db dbp, const Dbt a, const Dbt *b)
int ai;
int bi;
memcpy(&ai,a->get_data(),sizeof(int));
memcpy(&bi,b->get_data(),sizeof(int));
return(ai-bi);
struct tuple
 int startPos;
 int endPos;
 int level;
main()
 FILE *fp;
 int i,j,k,l,m,n,total=0;
 char dbname[500],filename[500],str [500];
 tuple t;
 Db *db;
 Dbt key,data;
 DbEnv myEnv(0);
 myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
 try {
 myEnv.open("/home/raviov/Desktop/example", DB_CREATE | DB_INIT_MPOOL, 0);
 catch (DbException &e) {
 cerr << "Exception occurred: " << e.what() << endl;
 exit(1);
 for(n=0;n<=84;n++)
 db = new Db(&myEnv, 0); // Instantiate the Db object
 db->set_bt_compare(compare_int);
 db->set_pagesize(PAGE_SIZE);
 strcpy(filename,"/home/raviov/Desktop/GTCReport/code/sequence/splitter/tree/");
 strcat(filename,itoa(n));
 fp=fopen(filename,"r");
 if(fp==NULL)
 cout<<"error in opening the file";
 exit(0);
 while(fgets (str , 500 , fp)!=NULL)
 sscanf(str,"%d(%d,%d,%d,%d)",&i,&j,&k,&l,&m);
 key=new Dbt(&i,sizeof(int));
 if(total==0)
 strcpy(dbname,itoa(j));
 t.startPos=k;
 t.endPos=l;
 t.level=m;
 data=new Dbt(&t,sizeof(t));
 if(total==0)
 try
 db->open(NULL,
 "tree.db",
 dbname,
 DB_BTREE,
 DB_CREATE,
 0);
 catch(DbException &e)
 cerr << "Failed to create DB object" << endl;
 exit(1);
 total=99;
 int ret=db->put(NULL,key,data,DB_NOOVERWRITE);
 if(ret==DB_KEYEXIST)
 cout<<"key already exist\n";
 exit(1);
 delete key;
 delete data;
 total=0;
 fclose(fp);
 try
 db->close(0);
 catch(DbException &e)
 cerr << "Failed to close DB object" << endl;
 exit(1);
 myEnv.close(0);
}The following code retrieves the records from database that we had built above...
#include <stdio.h>
#include <db_cxx.h>
#include <iostream.h>
#include <db.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
int PAGE_SIZE=8192;
int numBuffers=2048;
char *itoa(const int x)
 char buf[100];
 snprintf(buf, sizeof(buf), "%d", x);
 return strdup(buf);
int compare_int(Db dbp, const Dbt a, const Dbt *b)
int ai;
int bi;
memcpy(&ai,a->get_data(),sizeof(int));
memcpy(&bi,b->get_data(),sizeof(int));
return(ai-bi);
struct tuple
 int startPos;
 int endPos;
 int level;
main()
 FILE *fp;
 int i,j,k,l,m,n,total=0;
 char *dbname;
 char filename[200],str [100];
 tuple t;
 Db *db;
 Dbt key,data;
 Dbc *cursorp=NULL;
 int ret,x=4;
 char *ravi;
 int p=84763;
 int y=2134872;
 int r,s,q,count=0;
 DbEnv myEnv(0);
 myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
 myEnv.set_data_dir("/home/raviov/new/database");
 try {
 myEnv.open("./", DB_CREATE | DB_INIT_MPOOL, 0);
 catch (DbException &e) {
 cerr << "Exception occurred: " << e.what() << endl;
 exit(1);
 db=new Db(&myEnv,0);
 db->set_pagesize(PAGE_SIZE);
 db->set_bt_compare(compare_int);
 dbname=itoa(p);
 try
 db->open(NULL,
 "tree.db",
 dbname,
 DB_BTREE,
 0,
 0);
 catch(DbException &e)
 cerr << "Failed to open DB object" << endl;
 exit(1);
 db->cursor(NULL,&cursorp,0);
 key=new Dbt();
 data=new Dbt();
 while(ret=(cursorp->get(key,data,DB_NEXT))==0)
 j=*((int*)key->get_data());
 q=(*((struct tuple*)data->get_data())).startPos;
 r=(*((struct tuple*)data->get_data())).endPos;
 s=(*((struct tuple*)data->get_data())).level;
 cout<<"position : "<<j<<"\t";
 cout<<"start : "<<q<<"\t";
 cout<<"end : "<<r<<"\t";
 cout<<"level : "<<s<<"\n";
 delete key;
 delete data;
 if(ret==DB_NOTFOUND)
 cout<<"no records";
 exit(1);
 if(cursorp!=NULL)
 cursorp->close();
 try
 db->close(0);
 catch(DbException &e)
 cerr << "Failed to close DB object" << endl;
 exit(1);
 myEnv.close(0);
}

AWM hangs after OBIEE metadata export

Similar Messages

Maybe you are looking for