AWM maintain CUBE not refreshing data
Hi,
I have refreshed the data that feeds my CUBE and it seems as if AWM is not deleting old CUBE data, when I view the source table for the CUBE in the mapping I can see there is only 1 row but after I maintain CUBE and tick the delete dimension members checkboxes and run process immediately in this session the original data exists. Any help appreciated.
Cheers,
Brandon
hello brandon,
my solution is quite awkward but it works:
you have to maintain the cube's measure data where the result would be 0 processed data(wierd huh?).
To do that you, you can empty one of the dimension's data(members) by emptying the table/view that it is mapped to, giving you a memberless dimension. Then maintain the cube's measures(do not include dimensions). This will give you a result of 0 processed data, and all records are rejected, all the while emptying the cube.
Then fill back the table/view that is mapped to the memberless dimenstion with data again so it will have its members back when you re-maintain it, then maintain cube data again.
There's probably a more elegant solution out there, but this one works for sure.
Similar Messages
-
Help me! AWM "maintain cube ... " performance: too slow with a small cube
Hi all,
I have 3 dimensions: TIMES, PRODUCTS, STORES
The hierarchy of TIMES, is in the order: year, quarter, month, week, day
The hierarchy of Products is in the order: sector, family, sub-family, product
The hierarchy of STORES is in the order: area, department, store
each hierarchy is mapped with a data set and the size is
730 lines (days) for the TIMES dimension
282 lines (products) for the PRODUCTS dimension
237 lines (stores) for the STORES dimension
With these dimensions, I create a cube and 2 measures: QUANTITY, BENEFIT
My measures used all 3 dimensions : TIMES, PRODUCTS, STORES.
I mapped in the end my cube with a dataset contains: store, day, product, quantity, benefit
This data set has 3921 lines.
I chosed the rule to aggregate all dimensions is SUM.
So when I do "maintain cube...", AWM takes much time to do it! (approximately 2h to maintain my cube)
Some one knows why it's long?
How can I do to accelerate it?
Due I modify the parameters in AWM or in my cube?
Thanks in advance!thanks all for your reply!
I done maintain cube already in following your advice. I increased the rollback and tmp space and changed "NUMBER to DECIMAL" as type of data of cube.
But I have other question. I hope you can help me!
1. What's the effect of the option "Choose the regions of the cube to be presummarized and stored in the analytic workspace" in the table "Summarize To" when you create a cube? If I check this option for all hierarchy level, the next time, when I do the request,
the time of calcul will be optimize so fastest?
(I check this option in creating my cube but when I make a request for level of a particular hierarchy, it's so long to have the result. I use a software this can connect and do request from Oracle Olap DataBase.)
2. I done maintain cube last week. Today I created a new cube and added more data set. But I cant maintain cube again. This is the message error. Can you explain to me why?
( I increase already the rollback and tmp space. To know how and what I done, view this thread please!
Error when I do "Maintain Cubes ..." )
--------------------------------------java.sql.SQLException: ORA-00933: SQL command not properly ended
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:330)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:287)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:742)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:206)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:789)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1030)
at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:829)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1123)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1678)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1644)
at oracle.olap.awm.dataobject.dialog.olapcatalog.TableDialog.populateTableDataModel(TableDialog.java:164)
at oracle.olap.awm.dataobject.dialog.olapcatalog.TableDialog.initialiseAndPopulate(TableDialog.java:68)
at oracle.olap.awm.dataobject.dialog.olapcatalog.TableDialog.<init>(TableDialog.java:57)
at oracle.olap.awm.wizard.awbuild.BuildWizardHelper.runBuild(BuildWizardHelper.java:252)
at oracle.olap.awm.navigator.node.modeler.cube.ModelerMeasureNode.actionPerformed(ModelerMeasureNode.java:226)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Thanks in advance! -
Brijesh,
I built my dimensions, levels and heirarchies successfully and also created cube. Now that I've built my measures and run the maintainance, I'm not seeing any values in them even though I know I should.
Based on my mapping, the keys from the fact are going to the right dimensions (and I even made a simplier, just one dimension --> measure cube as well), but no success. There are cases where I know I shouldn't get any data (based on selected values), but when I make valid selection I see only 0.00 being displayed.
Can you tell where I may have gone wrong here? Are the values made available for selection (the attributes) ONLY supposed to be the same one-to-one values available in the fact table?
**I'm using the simple SUM aggregate function for my measures, and pretty much all the default configurations given.
Brijesh Gaur
Posts: 416
Registered: 04/03/08
Re: where are dimension attributes in AWM - cube viewer?
Posted: Nov 10, 2009 3:21 AM in response to: mikeyp Reply
Attribute is something related to dimension. They are purely the property of the dimension and not the fact. Now you said the data is not visible in the cube and you are getting 0.00 even with a simplier case(one dimensional cube). There are many causes of the value not shown in the cube and some are mentioned below
1. All records are rejcted in the cube maintaince process. For this you can check olapsys.xml_log_log table and see if you can find any rejected records.
2. There is some breakage in the hierarchy of the dimension. It also prevents data from summing up.
Did you tried with the global sample available on OTN? That should be good starting point for you.
You can check the cube as below to find out it is loaded or not. Consider your one dimensional cube. Find out a member which is existing in the dimension and also has some fact value associated with it.
1. Now limit your dimension to that value like this
lmt <dim name> to '<value>'
For compressed composite cube
2. Now check data in the cube like this
rpr cubename_prt_topvar
for uncompressed cube you should do
rpr cubename_stored
#2 should show the same value which is available in the fact.
Thanks,
Brijesh
mikeyp
Posts: 14
Registered: 09/22/09
Re: where are dimension attributes in AWM - cube viewer?
Posted: Nov 13, 2009 1:24 PM in response to: Brijesh Gaur Edit Reply
Brijesh,
Thanks for your suggestions, and here are my results based on that.
1. No records rejected after running cube maintenance
2. I didn't limit my dimension to specific value as you recommended, but made my member the same as my Long and Short description attributes using AWM. (Its a flat dimension i.e. no level or hierarchy since the dimension only has one value/meaningful field.
Based on those steps, I still didn't get the results I was looking for. The fact table has five values for that one dimension and I'm seeing 0.00 for 4 of them, and an inaccurate value for the last one. (this after doing comparison with simple aggregate query against fact)
Do you have any other possible reasons/solutions?
**Loading the Global Schema into our dev environment is out of my hands unfortunately, so that's the reason for the prolonged learning curve.Brijesh,
Here's the results of what you suggested:
1. Creating test dim and fact table with simple case you provided was successful, and AWM was able to map the same values to cube which was created on top of that model.
2. I took it a step further and changed dim values to be same like existing dim table
2.b. Also replaced test fact table values to mimic existing values as well so it would match what's available in dim table, and here's where the fun / mystery begins
Scenario 1:
I created fact like this...........select dim value, sum(msr) from <existing fact table>
As you can easily tell, my values were already aggregated in the table, and they also match perfectly in cube created by AWM - no issue.
Scenario 2:
Created fact like this............select dim value, msr from <existing fact table>
Quite clear is that my values are no longer aggregated, and broken down across multiple occurences of dim values; did this so that I can verify that the "sum" will actually work when used in AWM.
The results from scenario 2 lead me back to same issue being faced before - i.e. the values weren't being rolled up when the cube was created. No records were rejected, and there was only ONE measure value showing up (and it was still incorrect), and everything else was 0.00
I retrieved this error from the command program that runs in the background. This was generated right after running the maintain cube:
<the system time> TRACE: In oracle.dss.metadataManager.............MDMMetadataProviderImpl92::..........MetadataProvider is created
<the system time> PROBLEM: In oracle.dss.metadataManager.........MDMMetadataProviderImpl92::fillOlapObjectModel: Unable to retrieve AW metadata. Reason ORA-942
BI Beans Graph version [3.2.3.0.28]
<the system time> PROBLEM: In oracle.dss.graph.GraphControllerAdapter::public void perspectiveEvent( TDGEvent event ): inappropriate data: partial data is null
<the system time> PROBLEM: In oracle.dss.graph.BILableLayout::logTruncatedError: legend text truncated
Please tell me this helps shed some light on the main reason for no values coming back; we really need to move forward with using Oracle cubes where we are.
Thanks
Mike -
Can not refresh data int the report...
Application on C#.
Steps:
1. Get Report without data from the database
2. Change the dataconnections in report to the current user
3. refresh data on the report (FilePath = TempFilePath)
4. Resave report file with data
5. Automatically open CrystalReportsViewer2008 and load the report
Result
On developer machine is allright, but on the user machine data isn't refreshed. Therefore CrysrtalReportsViewer2008 can't open report. It say that check the SaveDatawithReport parameter.
In process I found that in temp directory on user pc, didn't creates some temprorary files which creates on developer PC. Why? Help me please.
Sorry for my English.There is the code of my programm
function ParseReport is refreshed the data and change dataconnections for current user
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Data.SqlClient;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.IO;
using System.Diagnostics;
using CRApp;
using Microsoft.Win32;
namespace CRApp
* u041Au043Bu0430u0441u0441 u0434u043Bu044F u0430u0432u0442u043Eu043Cu0430u0442u0438u0437u0438u0440u043Eu0432u0430u043Du043Du043Eu0433u043E u0432u0438u0437u0443u0430u043Bu044Cu043Du043Eu0433u043E u0434u043Eu0441u0442u0443u043Fu0430
* u043A u0444u0430u0439u043Bu0430u043C u0448u0430u0431u043Bu043Eu043Du043Eu0432, u0441u0433u0435u043Du0435u0440u0438u0440u043Eu0432u0430u043Du043Du044Bu0445 u0432
* u043Fu0440u043Eu0433u0440u0430u043Cu043Cu0435 Crystal Reports
public partial class Export2CR_MForm : Form
public Export2CR_MForm()
InitializeComponent();
Start();
public void Start()
LoginForm Login = new LoginForm();
DialogResult Dres = Login.ShowDialog();
if (Dres == DialogResult.OK)
if (Login.GetConStr().ToString() != "")
GetReportNamesFromDataBase(Login.GetConStr());
SetConnectionString(Login.GetConStr());
this.CenterToScreen();
Visible = true;
Login.Close();
else
Login.Close();
this.CenterToScreen();
this.OnClosed(null);
* u041Fu043Eu043Bu0443u0447u0430u0435u043C u043Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du044Bu043C u0444u0430u0439u043Bu0430u043C
TempFilePath = Path.GetTempPath();
* u041Au0440u0438u0441u0442u0430u043Bu043Eu0432u0441u043Au0438u0439 u0432u044Cu044Eu0432u0435u0440u043Eu043A
CrystalDecisions.Windows.Forms.CrystalReportViewer viewer;
* u041Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du043Eu0439 u043Fu0430u043Fu043Au0435
private string TempFilePath;
* u041Fu0430u0440u0430u043Cu0435u0442u0440 u0437u0430u043Fu0438u0441u0438 u0432 u0440u0435u0436u0438u043Cu0435, u0442u0430u0431u043Bu0438u0446u0435 (u0438u0442u0434...)
* u041Du0443u0436u0435u043D u0434u043Bu044F u0442u043Eu0433u043E u0447u0442u043Eu0431u044B u0432u044Bu0431u0438u0440u0430u0442u044C
* u043Eu043Fu0435u0440u0435u0434u043Bu0451u043Du043Du044Bu0439 u0434u0430u0442u0430u0441u0435u0442, u0441u043Eu043Eu0442u0432u0435u0442u0441u0442u0432u0443u044Eu0449u0438u0439 u0432u044Bu0431u0440u0430u043Du043Du043Eu0439 u0437u0430u043Fu0438u0441u0438
private int ObjectIDOfTemplate;
* u0423u0441u0442u0430u043Du043Eu0432u043Au0430 u0437u043Du0430u0447u0435u043Du0438u044F ObjectIDOfTemplate
public void SetObjectIDOfTemplate(int /*
* ObjectID u0442u043Eu0433u043E u0448u0430u0431u043Bu043Eu043Du0430,
* u043Au043Eu0442u043Eu0440u044Bu0439 u043Du0430u0434u043E u043Fu043Eu043Bu0443u0447u0438u0442u044C
EnternalObjectID)
ObjectIDOfTemplate = EnternalObjectID;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C ObjectID u0448u0430u0431u043Bu043Eu043Du0430
* u0441 u043Au043Eu0442u043Eu0440u044Bu043C u0440u0430u0431u043Eu0442u0430u043Bu0438 u0434u043Bu044F
* u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E u0432u043Du0435 u0431u0438u0431u043Bu0438u043Eu0442u0435u043Au0438
public int GetObjectIDOfTemplate()
return ObjectIDOfTemplate;
* u041Fu0443u0442u044C u043A u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
private string TemplateFilePath;
* u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u043Fu0443u0442u044C u043A
* u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
public void SetTemplateFilePath(string In)
TemplateFilePath = In;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0443u0442u044C u043A
* u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
public string GetTemplateFilePath()
return TemplateFilePath;
* u0424u0443u043Du043Au0446u0438u044F u043Eu0442u043Au0440u044Bu0442u0438u044F u0444u0430u0439u043Bu0430,
* u043Fu043Eu043Bu0443u0447u0435u043Du043Du043Eu0433u043E u0438u0437 u0431u0430u0437u044B u0438
* u043Fu043Eu043Bu043Eu0436u0435u043Du043Du043Eu0433u043E u0432u043E u0432u0440u0435u043Cu0435u043Du043Du0443u044E u043Fu0430u043Fu043Au0443
public int ParseReport(string FilePath)
viewer = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
CrystalDecisions.CrystalReports.Engine.ReportDocument rd =
new CrystalDecisions.CrystalReports.Engine.ReportDocument();
try
rd.Load(FilePath);
try
for (int i = 0; i < rd.DataSourceConnections.Count; i++)
rd.DataSourceConnections<i>.SetConnection(
GetConnectionString().GetServerName(),
GetConnectionString().GetDatabaseName(),
GetConnectionString().GetUserName(),
GetConnectionString().GetPassword()
for (int j = 0; j < rd.Database.Tables.Count; j++)
DataTable dataSet = new DataTable();
SqlConnection C = new SqlConnection(GetConnectionString().ToString());
string ViewName = GetDataViewName(GetConnectionString(), ParseTableName(
rd.Database.Tables[j].Name));
SqlCommand Q = new SqlCommand("select * from " + ViewName
, C);
Q.CommandType = CommandType.Text;
SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = Q;
adapter.Fill(dataSet);
rd.Database.Tables[j].SetDataSource(dataSet);
catch (Exception e)
MessageBox.Show(e.Message);
try
SetTemplateFilePath(TempFilePath + "\\" + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
rd.ReportOptions.EnableSaveDataWithReport = true;
viewer.ReportSource = rd;
viewer.RefreshReport();
rd.SaveAs(TemplateFilePath);
rd.Close();
return 0;
catch (Exception e)
MessageBox.Show(e.Message);
return -1;
catch (Exception ex)
rd.ReportOptions.EnableUseDummyData = true;
rd.ReportOptions.EnableSaveDataWithReport = true;
viewer.RefreshReport();
rd.SaveAs(TemplateFilePath);
MessageBox.Show("Error: Could not read file from disk. Original error: " + ex.Message);
return -1;
* u0420u0430u0437u0431u0438u0435u043Du0438u0435 u0438u043Cu0435u043Du0438 u0442u0430u0431u043Bu0438u0446u044B
* u0434u043Bu044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u043Du043Eu043Cu0435u0440u0430 u043Au043Bu0430u0441u0441u0430
public string ParseTableName(string TableName)
// MessageBox.Show(TableName);
int x = 0;
if (TableName.Contains("Class"))
x = TableName.LastIndexOf("s");
return TableName.Remove(0,x+1);
if(TableName.Contains("Attr"))
x = TableName.IndexOf("r");
// MessageBox.Show(x.ToString());
// MessageBox.Show(TableName.Remove(0, x+1));
return TableName.Remove(0, x+1);
* u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0444u0430u0439u043Bu0430 u0438u0437 u0431u0430u0437u044B
public int ParseReportWithDataBase()
try
string ConnectionString = GetConnectionString().ToString();
SqlConnection C = new SqlConnection(ConnectionString);
C.Open();
string SelectString = "select P119 from "+ GetDataViewName(GetConnectionString(),"24") +" where P115='";
SelectString = SelectString+FileTreeView.SelectedNode.Text.ToString()+"'";
SqlCommand Q = new SqlCommand(SelectString, C);
Q.CommandType = CommandType.Text;
SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = Q;
DataTable table = new DataTable();
adapter.Fill(table);
byte[] b = (byte[])table.Rows[0].ItemArray.GetValue(0);
FileStream fs = File.Create(TempFilePath+"\\"+FileTreeView.SelectedNode.Text.ToString()+".rpt");
fs.Write(b, 0, b.Length);
fs.Close();
C.Close();
return 0;
catch (Exception ex)
MessageBox.Show(ex.Message);
return -1;
* u0421u0442u0440u0443u043Au0442u0443u0440u0430, u043Eu043Fu0438u0441u044Bu0432u0430u044Eu0449u0430u044F u043Fu0430u0440u0430u043Cu0435u0442u0440u044B
* u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043A u0431u0430u0437u0435 u0434u0430u043Du043Du044Bu0445,
* u043Au0430u043A u0434u043Bu044F u0432u043Du0435u0448u043Du0435u0433u043E u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F
* u0442u0430u043A u0438 u0434u043Bu044F u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E
public struct ConnectionString
* u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
private string DataSource_Value;
* u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
private string InitialCatalog_Value;
* u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
private string UserID_Value;
* u041Fu0430u0440u043Eu043Bu044C
private string Password_Value;
* u041Fu0435u0440u0435u0433u0440u0443u0436u0435u043Du043Du044Bu0439 u043Au043Eu043Du0441u0442u0440u0443u043Au0442u043Eu0440
* u0434u043Bu044F u0440u0443u0447u043Du043Eu0439 u0438u043Du0438u0446u0438u0430u043Bu0438u0437u0430u0446u0438u0438
* u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F,
* u043Du0443u0436u0435u043D u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E
* u0432 u043Eu0434u0440u0443u0433u0438u0445 u0444u043Eu0440u043Cu0430u0445
public ConnectionString(string /*
* u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
InDataSource_Value,
string /*
* u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
InInitialCatalog_Value,
string /*
* u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
*/ InUserID_Value,
string /*
* u041Fu0430u0440u043Eu043Bu044C
*/ InPassword_Value)
DataSource_Value = InDataSource_Value;
InitialCatalog_Value = InInitialCatalog_Value;
UserID_Value = InUserID_Value;
Password_Value = InPassword_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F u0441u0435u0440u0432u0435u0440u0430
* u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
public string GetServerName()
return DataSource_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Du0430u0437u0432u0430u043Du0438u0435
* u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
public string GetDatabaseName()
return InitialCatalog_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F
* u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
public string GetUserName()
return UserID_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0430u0440u043Eu043Bu044C
* u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
public string GetPassword()
return Password_Value;
* u041Fu0435u0440u0435u0432u043Eu0434 u0441u0442u0440u0443u043Au0442u0443u0440u044B u0432 u0442u0435u043Au0441u0442u043Eu0432u044Bu0439 u0432u0438u0434
* u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u043Fu0440u0438 u0441u043Eu0437u0434u0430u043Du0438u0438 u043Au043Eu043Du043Du0435u043Au0442u043Eu0440u0430
public override string ToString()
return "Data Source="+DataSource_Value+";Initial Catalog="+
InitialCatalog_Value+";User ID="+UserID_Value+";Password="+
Password_Value;
* u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043Fu043E u0443u043Cu043Eu043Bu0447u0430u043Du0438u044E
* u043Du0443u0436u043Du0430 u0431u044Bu043Bu0430 u0434u043Bu044F u0442u0435u0441u0442u043Eu0432
static private string GetDefaultConnectionString()
return "Data Source=BSRV01;Initial Catalog=Prokat_Last;User ID=sa;Password=";
* u0412u043Du0443u0442u0440u0435u043Du043Du044Fu044F u0441u0442u0440u043Eu043Au0430 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
* u043Du0435 u0434u043Eu0441u0442u0443u043Fu043Du0430 u0434u043Bu044F u0432u044Bu0437u043Eu0432u0430 u043Du0430u043Fu0440u044Fu043Cu0443u044E
private ConnectionString localConnectionString;
* u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
public void SetConnectionString(ConnectionString CS)
this.localConnectionString = CS;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
public ConnectionString GetConnectionString()
return this.localConnectionString;
* u0424u0443u043Du043Au0446u0438u044F u0443u0434u0430u043Bu0435u043Du0438u044F u0432u0440u0435u043Cu0435u043Du043Du043Eu0433u043E u0444u0430u0439u043Bu0430
* u043Fu043Eu0441u043Bu0435 u0437u0430u0432u0435u0440u0448u0435u043Du0438u044F u0432u0441u0435u0445 u043Eu043Fu0435u0440u0430u0446u0438u0439 u0441 u0448u0430u0431u043Bu043Eu043Du043Eu043C
private void MainForm_FormClosed(object sender, FormClosedEventArgs e)
if (FileTreeView.Nodes.Count!=0)
if (File.Exists(TemplateFilePath))
File.Delete(TemplateFilePath);
* u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u0434u0432u043Eu0439u043Du043Eu0433u043E u043Au043Bu0438u043Au0430
* u043Fu043E u0448u0430u0431u043Bu043Eu043Du0443 u0432 u0434u0435u0440u0435u0432u0435 u0444u0430u0439u043Bu043Eu0432
public void FileTreeView_DoubleClick(object sender, EventArgs e)
int Result = 0;
try
Result = ParseReportWithDataBase();
if (Result == 0)
Result = ParseReport(TempFilePath + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
if (Result == 0)
Process.Start(TemplateFilePath);
else
MessageBox.Show("u0424u0430u0439u043B u043Du0435 u043Cu043Eu0436u0435u0442 u0431u044Bu0442u044C u043Eu0442u043Au0440u044Bu0442!");
catch (Exception ex)
MessageBox.Show(ex.Message);
* u041Fu043Eu043Bu0443u0447u0435u043Du0438u0435 u0432u0441u0435u0445 u0444u0430u0439u043Bu043Eu0432 u0441 u0440u0430u0441u0448u0438u0440u0435u043Du0438u0435u043C .rpt
* u0438u0437 u0431u0430u0437u044B u043A u043Au043Eu0442u043Eu0440u043Eu0439 u043Fu0440u0438u0441u043Eu0435u0434u0438u043Du0438u043Bu0438u0441u044C
public void GetReportNamesFromDataBase(ConnectionString CS)
try
SqlConnection C = new SqlConnection(CS.ToString());
SqlDataAdapter adapter = new SqlDataAdapter();
DataTable table = new DataTable();
table.Clear();
string sqlcom = "Select P115 from " + GetDataViewName(CS,"24") + " where P116 like '%.rpt'";
SqlCommand Q1 = new SqlCommand(sqlcom,C);
Q1.CommandType = CommandType.Text;
adapter.SelectCommand = Q1;
adapter.Fill(table);
FileTreeView.Nodes.Clear();
for (int i = 0; i < table.Rows.Count; i++)
FileTreeView.Nodes.Add(table.Rows<i>.ItemArray.GetValue(
table.Rows<i>.ItemArray.Length-1).ToString());
// MessageBox.Show(table.Rows<i>.ItemArray.GetValue(0).ToString());
C.Close();
catch (Exception ex)
MessageBox.Show(ex.Message);
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F DataView
* u0434u043Bu044F u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
private string GetDataViewName(ConnectionString CS,string ClassID)
string ViewName = "";
SqlConnection C = new SqlConnection(CS.ToString());
C.Open();
SqlCommand Q = new SqlCommand("[dbo].[_SysGetClassesInfoNew1]"/*P115 from dbo.Attr24 where P116='.rpt'*/, C);
Q.CommandType = CommandType.Text;
SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = Q;
DataTable table = new DataTable();
adapter.Fill(table);
for (int i = 0; i < table.Rows.Count; i++)
if (table.Rows<i>.ItemArray.GetValue(0).ToString() == ClassID)
ViewName = table.Rows<i>.ItemArray.GetValue(13).ToString();
// MessageBox.Show(ViewName);
C.Close();
return ViewName;
* u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u043Au043Bu0438u043Au0430 u043Du0430 u0432u044Bu043Fu0430u0434u0430u044Eu0449u0435u043C
* u043Cu0435u043Du044E u0432 u043Fu0443u043Du043Au0442u0435 "Delete"
private void deleteToolStripMenuItem_Click(object sender, EventArgs e)
FileTreeView.SelectedNode.Remove(); -
Report Portlets do not refresh data.
How can I refresh a report portlet?
I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
Thanks, DebI had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.
-
Report prints Saved Data not Refreshed Data
We were running VS 2005 and using the Basic CR 2005 Basic that comes with it. We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development. This has caused a lot of stress with us as well as our users. Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed. It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe. When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us. With research, I found that we can change the PrintMode to be u2018ActiveXu2019. This was much better when we were testing. However, in Production it became a nightmare. If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format. It was exporting into RPT format. It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore). In addition, they reported it was taking twice as long to export (we think it was related to export file type now). With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one. After much research, I found there is no way to customize the operation of the export without writing my own export. My users 90% of the time want to export to PDF and Excel the rest of the time. Since we arenu2019t using a CR Server like product, they NEVER will do RPT. There is no way with CR2008 to limit this list or to default the File Format. So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one. Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us. Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed. Export uses the ID property of the Crystal Report Viewer as the default name of a file on export. When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID. We now have to go back and change them to what we wanted manually. BEAWRE of this! For our power users who wanted to export 40 reports they now have type the name in manually on all of them. What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data. It turns out there shows Saved Data from design time. In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters. We use the CrystalReportSource using ODBC. The report has all the connection information. Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database. They see our test data instead which is garbage. If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data. This can be catastrophic for us! So I added at the beginning of the Page Load before setting parameters the following:
If Not Page.IsPostBack Then
CRSServiceAlertsReport.ReportDocument.Refresh()
End If
This seemed to work. A pain to add on every report page though when it wasnu2019t necessary before. But then I just got called this morning and they say when they print, it prited the OLD data. It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data! I couldnu2019t find a solution for this. I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above. I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008. Iu2019m still looking for help on getting by the following:
u2022 Stop using Saved Data at runtime (either on Display or Print)
u2022 Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022 Remove File Type options from Export
u2022 Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it. Come on BO is a big company Iu2019m sure they can work with MS. What is that method to clear Saved Data; I looked and couldn't find it. I never had to call one in the prior version of CR 2005 Basic in .Net. With the .NET controls, it always refreshed the data before. This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before. This is new behavior. It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that). This is a change in behavior from prior versions and it has caused me several issues.
Many users don't like change and I didn't know to communicate this to them. They were taken by surprise. We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print? I would think you would use Export if you want to save. It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea. I know how hard it can be working with third parties. However, given that CR Basic comes with it, I thought it may be possible to work with them. The better the integration the better the product is for the developers. I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method. Since I donu2019t know how the Control works, I couldnu2019t say. It just would be nice. I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data. Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM -
UIX form will not refresh data within session
I have some UIX forms to view a table, they displays data fine but when the underling table data changes (from another user session or an update trigger from different table) the forms will not show refreshed data, unless I delete my browser session cookie. Is there a simple way to fix this, and cause data to be reloaded each time its displayed? I'm using JDeveloper 10.1.2
Thanks, Craig Smith
Message was edited by:
user503876
Message was edited by:
user503876Dear Sir...
in the struts page flow diagram
1- create a data action
2- drag the execute method from the viewobject methods and drop it on the data action
3- draw a page forward from the data action to your data page
4- finally ad a refresh link in your page which links to your data action
now each time you click the refresh button on your page, the execution will go to the data action, where the execute method is executed (the data is refreshed) and then the control goes back to your page.
best regards -
PDF output does not refresh data in BI Publisher, XML and HTML do refresh
I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
OS is Oracle Enterprise Linux.
Any help on this will be very welcome.
FranciscoOpen the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved. -
Transaction DB02 not refresh data
Hello,
we have installed ECC5.0 on OS400 with DB400. We have an issue with transaction DB02, it does not show new data, i mean no refresh. The last data had some months.
We have checked the transaction DB4COCKPIT and works ok, it showme actually data.
What can we check?
ThanksHai,
Have you checked for the Standard jobs in your system, please chk whether they are running or not.
Also check the notes:
1. 1002840 - No data or obsolete data in DB Space Statistic monitor
2. 1028624 - Overview of DBA Cockpit for Oracle
3. 907443 - Oracle database monitor
Hope this helps.
Regards,
Yoganand.V -
BEx not refreshing data on all embedded queries:One variable, one variant:
Good day
I have the following challenge. I have created a BEx workbook and inserted one query multiple times into this workbook. I have removed the result area of each query to a separate sheet to enable the use of different filter values and to use some excel formatting to change fonts, colours etc.
I have created a ocalday variable selection to this query. The data must be displayed for the last day of each month for a period of 12 months from a certain ocalday. I created and saved a variant for this, adding the last ocalday of each month from 2009/05/31 to 2010/04/30 in the selection option of the variable, thus it looks like this in the variable selection of single values:
2009/05/31
2009/06/30
2009/07/31
Etc
Etc
I have ticked the option u201Crefresh queries when opening workbooku201D in the properties of the query and applied it to all. When the user opens the workbook, the users must select the variant on the variable selection screen and refresh all the queries.
Now, my challenge comes in where only one query is refreshed with the required dates. All the other results cannot be found and it displays the last date in the variant (ie. 2009/04/30). You need to go and refresh each query separately, using the same variant. This is time consuming as some workbooks have > 50 queries.
Thus, one query embedded multiple times, one variable, one variantu2026u2026
Why does the variant not apply to all the embedded queries when data is refreshed?
Your expert assistance will be appreciated.
Have a nice day
CjHi,
When you have multiple queries in the workbook which have variables with that,refreshing the workbook,will prompt you the variable screen where you can enter the variables which can take effect in all the queries.
Go to Workbook Settings->General tab->Check Refresh workbook on Open->Go to Variables tab->Check Process Varaibles on Refresh and Display Duplicate Variables Only Once.Save and reopen the workbook.
Now it will prompt for variable screen where you ca enter the variable values which is common for all the queries.
The data will be shown in all the ANalysis items based on the variables entered for the queries.
Rgds,
Murali
Edited by: MuraliKrishnan E on Sep 10, 2009 2:21 PM -
XML publisher with graph not refresh date
Hi
I use EBS r12, and i create report using XML and BI Publisher rtf file, this report include graph, the problem is when i add the graph according to xml data and run the report throw bi publisher desktop its work fine, but when i run it in concurrent it will show table data OK but graph data will not change according to XML data,
Any suggestion?Hi,
Please refer note:
BI Publisher Graphing On A Unix Platform Not Handling XML Data [ID 1189413.1]
Best Regards -
BPM chart (process cube) not displaying data from business indicators
SOA/BPM Gurus,
I need some pointers for the below problem.
I am trying to do a basic BPM tutorial of generating a chart out of business indicators. I am creating a custom dashboard in the BPM workspace for the Request Quote process. The problem is that after I create the chart definition in BPM workspace, the charts do not pull any data for the business indicators. Here are the high level steps that I have performed:
1. Created a Request Quote process with typical steps such as - 1. Submission of Quote by Sales Rep; 2. Business Practices approval; 3. Deal & Contract Terms approval; 4.Save Quote.
2. I created 3 business indicators - Revenue Dimension, Industry Dimension, discount
3. After deployment, submitted a few quote requests through to final SaveQuote step.
4. Added a script task just before the Save Quote step to initialize these indicators from the corresponding elements from quote.xsd
5. Using the Sales Rep user, created a custom page and created a Data Source (Bar graph) with series=Revenue Dimension, Group=Industry, Variable=discount (operation=avg). The data type is Activity & measurement Sampling.
Initially I thought that the cause for data not being shown up is that the business indicators are not being initialized at all. But then I debugged this by writing the business indicators to the file on the SaveQuote step; the file generated did print all the correct values for the business indicators proving that they are being initialized.
Also, just to check whether the graph is picking any data at-all, I changed the data source to Work load per process and work load per participant and checked whether it shows transactions being created for the RequestQuote; the gragh did show data.
I am not sure I am missing any step such as a setting,etc on weblogic or em
Regards,
SudriptaHi,
You should complete the instances to see the data for the "Activity & measurement Sampling" graphs.
Make sure you have completed instances.
thanks,
Murugesh -
11g Cube not showing any data with no Rejected records
Hi David ,
Strangely one of my 11g Cube is not showing data from today as it is showing all records rejected . However when I lookup Rejected records table I didn't find any records .Not sure what is happening . When I want to peep out the AWM queries from CUBE_BUILD_LOG and ran to the database in the AWM schema the records are retruning perfectly fine . I wonder same query is firing during Cube load but without any data ? My Cube build script has only LOAD and Aggregate .
after maintain My dimensions data are looking fine but no data populated after Cube maintenance . My MV switch off across all dimensions and cubes .
I navigate to CUBE_OPERATION_LOG and not able to comprehend about the content.
Any advice ?
Thanks and Regards,
DxPHi David ,
To be very frank today is very bad day ... Please see below my observation:
Executed below to make sure that no key values in dimension is missing but present in fact . All below query returns no row.
select distinct owner_postn_wid from w_synm_rx_t_f
minus
select distinct row_wid from postn_dh
select distinct payer_type_Wid from w_synm_rx_t_f
minus
select distinct row_wid from wc_ins_plan_dh
select distinct market_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_product_dh
select distinct period_day_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_daytime_D
select distinct contact_wid from w_synm_rx_t_f
intersect
select distinct row_wid from w_person_d
select distinct X_TERR_TYPE_WID from w_synm_rx_t_f
minus
select distinct row_wid from W_LOV_D
============================
Below returns count of 0 rows : ensure no NULL present
select count(1) from w_synm_rx_t_f where contact_wid is null;
select count(1) from w_synm_rx_t_f where owner_postn_wid is null;
select count(1) from w_synm_rx_t_f where payer_type_Wid is null;
select count(1) from w_synm_rx_t_f where period_day_wid is null;
select count(1) from w_synm_rx_t_f where X_TERR_TYPE_WID is null;
select count(1) from w_synm_rx_t_f where market_wid is null;
+++++++++++++++++++++++++++++++++
Cube Build Log has below entry:
796 0 STARTED CLEAR VALUES MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.267000000 PM +05:30 JAVA 1 C 47141 67 0 1
796 0 COMPLETED CLEAR VALUES MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.267000000 PM +05:30 JAVA 1 C 47141 67 0 2
796 0 STARTED LOAD MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.283000000 PM +05:30 JAVA 1 C 47142 68 0 1
796 0 SQL LOAD MKT_SLS_CUBE CUBE "<SQL>
<![CDATA[
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST ]]>/>
</SQL>" NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.627000000 PM +05:30 JAVA 1 MAP1 C 47142 68 0 2
796 0 COMPLETED LOAD MKT_SLS_CUBE CUBE "<CubeLoad
LOADED="0"
REJECTED="4148617"/>" NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.40.486000000 PM +05:30 JAVA 1 C 47142 68 0 3
796 0 STARTED UPDATE MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.40.501000000 PM +05:30 JAVA 1 C 47143 69 0 1
796 0 COMPLETED UPDATE MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.40.548000000 PM +05:30 JAVA 1 C 47143 69 0 2
+++++++++++++++++
You can observer clear rejection of 4 million rows ... Ran the above query which returns my data successfully.
Look out to CUBE_REJECTED records take the sample record and put into the above query it is returning the data fine with my measures and dimension WID's :(PLEASE SEE BELOW THE FILTERS on ROW_WID)
=========================
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND T13_ROW_WID = 255811
AND T7_ROW_WID = 122
AND T4_ROW_WID =3
AND T1_ROW_WID=230
AND T10_ROW_WID = 26
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST
=================================
THE XML export of CUBE as below:
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.2"
MinimumDatabaseVersion="11.2.0.1">
<Cube
ETViewName="MKT_SLS_CUBE_VIEW"
Name="MKT_SLS_CUBE">
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="TRX"
Name="TRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="TRX">
</Description>
</BaseMeasure>
</Measure>
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="NRX"
Name="NRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="NRX">
</Description>
</BaseMeasure>
</Measure>
<CubeMap
Name="MAP1"
IsSolved="False"
Query="W_SYNM_RX_T_F"
WhereClause="W_DAYTIME_D.ROW_WID = 20100101">
<MeasureMap
Name="TRX"
Measure="TRX"
Expression="W_SYNM_RX_T_F.MKT_TRX">
</MeasureMap>
<MeasureMap
Name="NRX"
Measure="NRX"
Expression="W_SYNM_RX_T_F.MKT_NRX">
</MeasureMap>
<CubeDimensionalityMap
Name="TIME"
Dimensionality="TIME"
MappedDimension="TIME.CALENDER.MONTHLY"
JoinCondition="W_SYNM_RX_T_F.PERIOD_DAY_WID = W_DAYTIME_D.ROW_WID"
Expression="W_DAYTIME_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="CUSTOMER"
Dimensionality="CUSTOMER"
MappedDimension="CUSTOMER.CUSTOMER_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_SYNM_RX_T_F.CONTACT_WID = W_PERSON_D.ROW_WID"
Expression="W_PERSON_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="INS_PLAN_DH"
Dimensionality="INS_PLAN_DH"
MappedDimension="INS_PLAN_DH.INS_PLAN.DETAIL"
JoinCondition="W_SYNM_RX_T_F.PAYER_TYPE_WID = WC_INS_PLAN_DH.ROW_WID"
Expression="WC_INS_PLAN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="LIST_OF_VALUES"
Dimensionality="LIST_OF_VALUES"
MappedDimension="LIST_OF_VALUES.LOV_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_LOV_D.ROW_WID = W_SYNM_RX_T_F.X_TERR_TYPE_WID"
Expression="W_LOV_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="POSITIONDH"
Dimensionality="POSITIONDH"
MappedDimension="POSITIONDH.POST_HIER.DETAIL"
JoinCondition="W_SYNM_RX_T_F.OWNER_POSTN_WID = POSTN_DH.ROW_WID"
Expression="POSTN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="PRODH"
Dimensionality="PRODH"
MappedDimension="PRODH.PRODHIER.DETAILLVL"
JoinCondition="W_SYNM_RX_T_F.MARKET_WID = W_PRODUCT_DH.ROW_WID"
Expression="W_PRODUCT_DH.ROW_WID">
</CubeDimensionalityMap>
</CubeMap>
<Organization>
<AWCubeOrganization
MVOption="NONE"
SparseType="COMPRESSED"
MeasureStorage="SHARED"
NullStorage="MV_READY"
CubeStorageType="NUMBER"
PrecomputePercent="35"
PrecomputePercentTop="0"
PartitionLevel="TIME.CALENDER.MONTHLY"
AW="&AW_NAME;">
<SparseDimension
Name="TIME"/>
<SparseDimension
Name="CUSTOMER"/>
<SparseDimension
Name="INS_PLAN_DH"/>
<SparseDimension
Name="LIST_OF_VALUES"/>
<SparseDimension
Name="POSITIONDH"/>
<SparseDimension
Name="PRODH"/>
<DefaultBuild>
<![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
LOAD NO SYNCH,
SOLVE
)]]>
</DefaultBuild>
</AWCubeOrganization>
</Organization>
<Dimensionality
Name="TIME"
ETKeyColumnName="TIME"
Dimension="TIME">
</Dimensionality>
<Dimensionality
Name="CUSTOMER"
ETKeyColumnName="CUSTOMER"
Dimension="CUSTOMER">
</Dimensionality>
<Dimensionality
Name="INS_PLAN_DH"
ETKeyColumnName="INS_PLAN_DH"
Dimension="INS_PLAN_DH">
</Dimensionality>
<Dimensionality
Name="LIST_OF_VALUES"
ETKeyColumnName="LIST_OF_VALUES"
Dimension="LIST_OF_VALUES">
</Dimensionality>
<Dimensionality
Name="POSITIONDH"
ETKeyColumnName="POSITIONDH"
Dimension="POSITIONDH">
</Dimensionality>
<Dimensionality
Name="PRODH"
ETKeyColumnName="PRODH"
Dimension="PRODH">
</Dimensionality>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<ConsistentSolve>
<![CDATA[SOLVE
SUM
MAINTAIN COUNT
OVER ALL
)]]>
</ConsistentSolve>
</Cube>
</Metadata>
+++++++++++++++++++++++
I dropped the AW and create new from exported XML and maintain all dimensions and then rebuild . Still have the issue :(
Any thing you can hightlight from above ?
Thanks,
DxP
Also I sustpect whethere it is a issue due to below error caused when I click on one of my Position_Hier view from AWM : even if I select that view it is throwing the error in SQL developer after displaying first couple of rows (while page down)
java.sql.SQLException: ORA-33674: Data block size 63 exceeds the maximum size of 60 bytes.
at oracle.olap.awm.util.jdbc.SQLWrapper.execute(Unknown Source)
at oracle.olap.awm.querydialog.PagedQueryDialog$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
Edited by: e_**** on Aug 17, 2011 8:41 PM -
Maintain CUBE - Does this refresh all dimensions as well
Hi,
When a CUBE is maintained from AWM 102020A, does this refresh all the dimensions linked to the CUBE or do we have to maintain each dimension first before the CUBE ?
Cheers,
Brandonthe dimensions will be automatically maintained based on the latest data on the tables as per the mapping.. maintaining the cube does it all.
-
Can not find data in virtual cube
Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AKHi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi
Maybe you are looking for
-
Error message in adobe digital editions
Hi. I am getting this message in Adobe Digital Editions when I open an epub I made "the document appears to have minor errors that might cause it to be displayed incorrectly" The epub is displaying fine. I checked in Adobe, Sony, FBReader, and Calibr
-
Why can't I open a link from my e-mail
'''''bold text'''''This problem only started recently. I am running Firefox 3.6.17 and whenever I click on a link I get an error sound with the message: Windows cannot find (whatever the address is that I clicked on) please check your spelling and tr
-
Warning with NIRFSG_ATTR_LO_IN_POWER attribute when setting the output of NI5673
Hello: I have a code that sets output power and frequency of NI PXI5673 generator. I used the example provided with the niRFSG library - RFSG Frequency Sweep.vi (attached). The spec for the generator says that it can generate continuous signals up t
-
Portal pointing to Backend (Multiple Application Servers)
Hello Experts, Landscape details : NW04s SP17 Portal for Travel Expense pointing to ECC 6.0 backend (running with 3 application servers). We don't have web dispather installed on the ECC 6.0 system, and client has no plan to install that also. We hav
-
HI all, I have an assignment to replicate production installation to another environment on another server. Currently what is installed on those servers is: - Main server (production): Windows server 2000 SP4, Forms 6i service, Reports 6i service , i