AWR Compare Periods report
Hi,
Oracle 10gR2
OS -- Linux
What are the package & procedures to run the AWR report using the pair of two snapshot Ids for comparison ??
Regards
5.3.5.5 Running the awrddrpt.sql Report
To compare detailed performance attributes and configuration settings between two time periods, run the awrddrpt.sql script at the SQL prompt to generate an HTML or text report:
@$ORACLE_HOME/rdbms/admin/awrddrpt.sql
Source: http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/autostat.htm#i35176
Regards
Asif Kabir
Similar Messages
-
How to use awr and addm reports
Hi,
to use awr and addm reports does we should have separate license or oracle server software license is enough.
which tool do we use to read this awr and addm reports in real time.
please give your valuable suggestions.
thank you!Seeing as you seem to want to continue the discussion on someone else's old thread rather than your own one
AWR files in oracle
If i don't then it is difficult to find the queries thata re related to my application as most of those are the sysqueries, i just need schema specific queries in the SQL ordered by Elapsed Time section. Perhaps you are using the wrong tool?
A system-level report like AWR or ADDM is no use to you as it seems your application code is not significant at the system level.
You might want to consider tracing the sessions from your application using client_id or module to identify sessions belonging to your application then possibly use TRCSESS and TKPROF. -
Hi All,
11.2.0.1
Aix 6.1
I got this awr top events report.
Can you help me how to interpret this please. Or what value to watch out here? Thanks a lot
AWR Top Events Report
i
n
Snap s Snap A
Snap Start t Dur Event Time Avgwt DB Time A
ID Time # (m) Event Rank Waits (s) (ms) % S Wait Class
13902 13/09/16 09:00 1 60.05 os thread startup 1 140.00 11.08 79.11 56 0.0 Concurrency
13902 13/09/16 09:00 1 60.05 CPU time 2 0.00 9.45 0.00 48 0.0 CPU
13902 13/09/16 09:00 1 60.05 log file parallel write 3 1506.00 1.84 1.22 9 0.0 System I/O
13902 13/09/16 09:00 1 60.05 control file parallel write 4 1291.00 1.41 1.09 7 0.0 System I/O
13902 13/09/16 09:00 1 60.05 log file sync 5 721.00 1.03 1.43 5 0.0 Commit
13903 13/09/16 10:00 1 60.05 os thread startup 1 138.00 10.36 75.10 47 0.0 Concurrency
13903 13/09/16 10:00 1 60.05 CPU time 2 0.00 10.28 0.00 47 0.0 CPU
13903 13/09/16 10:00 1 60.05 log file parallel write 3 1575.00 1.73 1.10 8 0.0 System I/O
13903 13/09/16 10:00 1 60.05 direct path read 3 486.00 1.73 3.56 8 0.0 User I/O
13903 13/09/16 10:00 1 60.05 control file parallel write 4 1285.00 1.51 1.17 7 0.0 System I/O
13903 13/09/16 10:00 1 60.05 log file sync 5 823.00 1.08 1.32 5 0.0 Commit
13904 13/09/16 11:00 1 60.05 CPU time 1 0.00 17.06 0.00 32 0.0 CPU
13904 13/09/16 11:00 1 60.05 os thread startup 2 145.00 10.65 73.46 20 0.0 ConcurrencyThanks I just told the users there is no problem in the db, and the stats is normal and no suspiscious activity, and that the problem is in the users mind only.
-
Roles and Privileges for 10g AWR and ASH reports
Are there specific roles and privileges are required for one to run AWR and ASH reports for users who don't have DBA roles? If so, I would like to know about them.
I think sysdba privilege need to run AWR report.
Also check, how privilege is granted to PERFSTAT user in $ORACLE_HOME/rdbms/admin/spcuser.sql, you might get some clue!!!
Cheer,
Virag -
Configure/view AWR and ADDM reports
our production server 11.1.0.7 (db) is running on redhat 5.3.
how i can configure/view AWR and ADDM reports for this from my local machine
please replythe AWR snapshots in 10g are automatically taken after every 1 hour by default , am i right ?
YES
some reference.
http://www.oracle-base.com/articles/10g/AutomaticWorkloadRepository10g.php -
LMS v.4 Periodic Reports
Hello Dears
I Need your support as i have problem with Periodic Reports, I need to stop creating them or change thier date
Can any one help me with this issue
Best Regards,
Mohamed AtefWe can suggest the best way to schedule the job you want in LMS. But you have to share more details on which job is it? Any system job or user created job? Name of job - like Netconfig, Sync Archive etc.
Ideally each job has as number in 4 digit : say 1234. And when the job is scheduled, it runs with an instance number after a decimal, like 1234.1, 1234.2, 1234.3, .... , 1234.n incrementing each time it runs.
To edit, you have to modify the first instance by searching that job in job browser under admin.
In a system job, which is there for inventory or configuration archive, you can simply try to disable it once and enable with new schedules.
Please share more details on job type and LMS version.
-Thanks
Vinod
**Encourage Contributors. RATE them ** -
AUD: Interfaced CIP/RWIP Amounts by FA Period Report
I am trying to reconcile the Assets capitalised in a Period.
Is this the correct report to use and will I be able to control the data which appears in the report using the FA Period parameters. For example, if I
want to analyse Assets capitalised in Q1 2103 if I use FA Period from = Jan-13 and FA Period to = MAR-13 will the report just display asset capitalised in
those periods?
Thanks in advance.
Regards
TomHi Tom,
AUD: Interfaced CIP/RWIP Amounts by FA Period Report to view a summary of assets and asset lines interfaced from Oracle Projects to Oracle Assets.
Optionally choose to sort the report by asset category or project number.
You must run the process PRC: Tieback Asset Lines from Oracle Assets before you run the AUD: Interfaced CIP/RWIP Amounts By FA Period Report.
Regards
Raghavender K -
Compare Period ADDM Report - SQL Commonality
All,
Does OEM 12c have any built-in method to choose two ADDM Periods with the highest "SQL Commonality" ? I haven't seen it in the GUI but I might be overlooking it.
Instead, I'm randomly selecting business hours/days and comparing workloads to determine if the changes the vendor made the application are really an improvement or not. Unfortunately, the SQL Commonality is, often times, < 50% and I don't believe those are the best comparisons to make. I'm looking for something > 50%.
No, the SQL hasn't changed significantly to always cause the SQL Commonality rate to be lower.
I'm hoping someone has a method to determine these versus me clicking and guessing. Even if it was PL/SQL to generate these reports and tell me which had the highest that would be a great help.
Thank you in advance!
Regards,
RichoracleRaj wrote:
Thanks I have checked it, I wanted to know How Can I Run SQL Tuning Advisor on the SQL statement with SQL_ID " XYZ " in EM ?The links provided to you will tell you how to do it, and the EM wizard is fairly self explanatory. I'm going to ask why you want to. You ran a report for 1/2 an hour on a system presumably with at least 2 CPUs (though you don't say) so that means you have most likely over an hours worth of CPU available to you. Your total database time is 6 minutes. That doesn't sound like a struggling database to me, does it to you? If you manage to save 66% of the time then you'll have saved 4 minutes. Is that a worthwhile goal.
However let's take a look at the most costly statement - the update - that consumes 112s or nearly 2 of your 6 minutes. However each execution only takes a twentieth of a second. Do your users notice that and want the update time to be (say) a fiftieth of a second instead? Where you might have an opportunity is in the fact that this statement is really quick, but is executed 2256 times in that half hour - that is 75 times a second. It's more than likely that this is a loop and that a more efficient way of doing this would be not to execute in the loop but execute a set based update. Unfortunately the SQL Tuning advisor isn't capable of making this sort of recommendation.
In total then it looks like you've only actually got 4 minutes of your half hour that the SQL Tuning Advisor is likely to be able to improve. The count(*) might be improvable - if say you haven't got an index on the send_unsend column and that column is selective - but you still have to ask is the potential improvement worth it.
Niall Litchfield
http:/www.orawin.info -
Special characters are not shown in compare document report in Acrobat X
Hi All,
I have a pdf document which is having some special characters like üὄ. Now I have updated the document with few corrections and while compare document in Acrobat X special characters are not shown in the report.
Can any one please look into this and give suggestion.Hi Steve,
Thanks for your reply.
Platform - PC
Application - 3B2 and Acrobat 9
So far we have seen this kind of issue in only one document. In the below screenshot you can see 2 pdf files, the right side one is my MS pdf and the left side one is the exported pdf from 3B2 application both the files having the special characters such as . I just did the text comparison however both and is missing in the exported pdf but the reports shown the changes for characters only wherever the charactes is missing the report not shown the changes properly(See highlighted in yellow).
Please let me know if you need more deatails. -
Privilege to create AWR and Statspack report to normal user
Hello,
I want to give right to one of the database user to create STATSPACK report in one database (no license there) and and to generate AWR report in other (licensed diagnostic+tuning pack).
Is there any privilege which I can give to create these reports only. I mean on a safe side ...
@?/rdbms/admin/spreport privilege to generate STATSPACK
@?/rdbms/admin/awrrpt privilege to generate AWR report.
Thanks a lot.
Best RegardsHi,
Check the grants again, seems you missed some grant. check the test here
SQL> create user test identified by test;
User created.
SQL> grant create session to test;
Grant succeeded.
SQL>
SQL> GRANT SELECT ON SYS.V_$DATABASE TO TEST;
GRANT SELECT ON SYS.V_$INSTANCE TO TEST;
GRANT EXECUTE ON SYS.DBMS_WORKLOAD_REPOSITORY TO TEST;
GRANT SELECT ON SYS.DBA_HIST_DATABASE_INSTANCE TO TEST;
GRANT SELECT ON SYS.DBA_HIST_SNAPSHOT TO TEST;
GRANT ADVISOR TO TEST;
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
SQL> conn test/test
Connected.
SQL> @?/rdbms/admin/awrrpt.sql
Current Instance
~~~~~~~~~~~~~~~~
DB Id DB Name Inst Num Instance
1667776968 DDTEST 1 ddtest
Specify the Report Type
~~~~~~~~~~~~~~~~~~~~~~~
Would you like an HTML report, or a plain text report?
Enter 'html' for an HTML report, or 'text' for plain text
Defaults to 'html'
Enter value for report_type: html
Type Specified: html
Instances in this Workload Repository schema
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DB Id Inst Num DB Name Instance Host
* 1667776968 1 DDTEST ddtest vnode
Using 1667776968 for database Id
Using 1 for instance number
Specify the number of days of snapshots to choose from
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Entering the number of days (n) will result in the most recent
(n) days of snapshots being listed. Pressing <return> without
specifying a number lists all completed snapshots.
Enter value for num_days: 1
Listing the last day's Completed Snapshots
for statspack user you can check the script spcreate.sql for details
HTH -
Comparing two report columns in webi
Hi ,
I have as cenario where we need to get unmatched records of 2 reports .
Ex:
Rept1
Name no rev
A 12323 100
B 23431 150
C 45631 200
Rept2
date No sales
1/3/15 123-23 300
3/2/15 234-31 400
4/3/15 356-31 300
final o/p : i need to compare rep1 no with rept 2 no and finally i need to dissplay unmatched records of Rept1 with Rept2.
here in above rept 1 & rept2 unmatched record is 45631 .
Thanks.then on report level you have to fetch both the report data in different queries
let say query1 contains data for report1
like wise for query2
now,
on report level create an object
New_No =toNumber(Replace(query2.No;"-";""))
Now merge No from query1 & New_No .
Create a formula =[No] Where (isNull(query2.sales) = 1 ), here [No] should be merged dimension.
this will get you result -
Periodic Report genration in Weblogic server using Oracle database and EJB3
Hello All,
I have to generate reports periodically, when periodicity for report generation is inserted into database(Oracle 11g in my case) using EJB3 entity bean from application server(Weblogic 11g). Immediately on insertion i have to start generation reports in csv format and save these files into the application server directory. My application server and Database are running on different machine.Okay, good luck with that. When you have an actual programming problem, feel free to come back and ask for help.
-
I want to build one report based on Bucketing Period. My row for the report is bucketing period. User will select a bucketing period from the selection screen. Then my output should be.
if the user selects 03.2009 as the bucketing period in the selection screen then my report should look like this.
Bucketing Period Value
03.2009 1000
04.2009 200
05.2009 300
06.2009 400
07.2009 600
08.2009 30
09.2009 20000
10.2009
11.2009
12.2009
01.2010
02.2010
03.2010
04.2010
05.2010
06.2010
07.2010
08.2010
09.2010
10.2010
Rest of 2010
2011
2012
2013
2014
2015
After 2015
For the first 20 month the bucketing period should be by every month wise, next row rest the balace of that year till Dec, next 6 rows with the bucketing should be total of the year ref the layout 2011, 2012, 2013, 2014, 2015. and after that the rest of all values in the cube. This bucketing period is dynamic and based on the selection what the user provides in the selection screen. The cube will provide the data based on the bucketing month. How it can be reported with the above format. In the above format the values are not fully mentioned but in the real senario it will be filled.I have this in my notes but I can't remember if it worked....It was a couple of years ago now:
set lines 120
set pages 0
set serverout on
set long 1000000
set longchunksize 1000000
variable report_bind CLOB
BEGIN
DBMS_WORKLOAD_REPLAY.COMPARE_PERIOD_REPORT (
replay_id1 => 1,
replay_id2 => '2',
format => 'HTML',
result => :report_bind);
END;
SPOOL WRC_Compare.html
print :report_bind
SPOOL OFF -
Periodic report on the classification of discussion
Hi,
I was just wondering if some sort of a report be published periodically on the nature of problems discussed in various forums. As discussed previously in one of the posts of ABAP Development Forum, a subclassification of the nature of problem will certainly help in searching and, at a later point, reporting on the nature of problems discussed most actively. Then, gurus like Thomas Jung can take some time out of their busy schedule and write a weblog on that category so as to help newbies as well as experts.
For the rest of us, still trying to learn and surely enjoyingSAP, we will have an idea about what the rest of the world is stumbling across and perhaps share our modest knowledge with the rest of the community.
Regards
ShehryarHi Hunt
There are quite a few posts on the subject on the forums.
Basically you can do one of these things:
1) Run an 'application summary' report - typically the count of 'flow out' calls will be the number of calls sent to your 1800 number, if this is the only non-CSQ destination that your script sends calls to (e.g. if there are no other external numbers, voicemail, or internal DNs that you send the calls to other than via a CSQ).
2) Run a 'custom call variables' report and then count up the number of rows that have the info that you set on 'set enterprise call info' when the call was routed externally
3) If those aren't good enough, then you can produce a custom report to show the data in the format the customer wants. This would require some good SQL and Crystal skills...
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts... -
Version 8.00c 4.0 - Periodical Reports
When trying to obtain bundle or container reports for periodical mailings via the new version of Business Edition, we only get the same sort summary. Any ideas?
Kim,
This is actually a bug in the software and is currently being worked on.
The workaround: Change the page height of the report by doing the following:
1. Click Print > Reports
2. Click the Bundle Charge and/or Container Charge reports
3. Click Options
4. Increase the page height by 1
5. Increase the bottom margin by 1
6. Click OK
7. Preview / Print the report
You will need to do this every time you need to preview or print the report.
Please let me know if you need anything else.
Thanks,
Melissa
Maybe you are looking for
-
Failed to initialize Databank exception when run from OLT
HI All, I've created a script with an associated databank,that runs perfectly fine when run from OpenScript. But when I run from OLT, the following waring is encountered. Start failure message from agent "OLT Server": oracle.oats.common.databank.Data
-
How to use COM DLL in LabWindows
Hello I have a COM .dll which looks like that when opened with dll export viewer: I would like to use the Get4AxisPos function in LabWindows. I understood that, as I only have the .dll, the only way of calling these functions are with the LoadLibrary
-
Upgrading from BEA Weblogic portal 8.1.5 to BEA Weblogic Portal 10.3
We are upgrading from BEA Weblogic portal 8.1.5 to BEA Weblogic Portal 10.3. We just took over the project from some other vendor since last 9 months. At some of the places in the code, we are using internal APIs of Weblogic Server which should not h
-
Since upgrading to ver 11 flash player 11 disapears on reboot
Since upgrading to firefox 11 I have to reinstall adobe flash player 11 each time as it disappears when I reboot. But works fine otherwise. Also after downloading the download window stops responding. This is happening all the time lately.
-
My contacts were slow to load and so I deleted a lot of extra emails that were slowing down my mail program. Then, I restarted my phone and my mail app wouldn't open! I couldn't even click in settings/mail, contacts, calendars. It didn't go anywher