AWS Instance Types for SAP HANA Developer Edition

According to the SAP HANA Enterprise Cloud Appliance Library, the recommended (and only) AWS instance type for running SAP HANA Developer Edition 1.0 SPS08 is m2.4xlarge; however, according to Amazon, this is a previous generation instance type. Per Amazon's upgrade path, the current generation upgrade from M2 is R3.
In addition, the m2.4xlarge instance type is costly for those who would like to expand their personal training experience beyond the free developer account on the HANA Cloud Platform.
Will the R3 instance types (specifically r3.large or r3.xlarge) be made available for running SAP HANA Developer Edition?

Also want to know this and this thread has the same question Support for AWS EC2 R3 instance type?

Similar Messages

Try now for SAP HANA developer edition 1.0 rev 80 returns error

Hi -
following documents
How to use CAL to create SAP HANA developer edition on AWS - Part 1
to build my first hana environment in the cloud.
created AWS account, SCN account and CAL accounts...
reached the point of selecting the
SAP HANA developer edition 1.0 rev 80 - try now
get an error: Operation Failed. An error occurred; contact your SAP Cloud Appliance Library operator
Tried different approach
followed this document
http://scn.sap.com/docs/DOC-55693
filled out the form with the AWS account info and region.
When submitted, get error
error while processing the request
The declaration for the entity HTML Version must end with '>'
I am using Chrome browser.
Please advise

Hi Diane,
sometimes AWS needs 24 hours to fully enable the AWS account.
How much time did elapse between the time you created the AWS account and the time you entered the credentials in CAL?
Can you try again now?
Regards,
Hannes

AWS - Cannot Terminate SAP HANA, developer edition 1.0 Rev 72

Hi,
yesterday I tried setting up an SAP HANA, developer edition 1.0 Rev 72 . However, the instance didn't get fully created, due to permissions issues with the AWS account I was using. So, I set up a new AWS account, and wanted to try again with the new AWS account.
However, I now have a "Prepared" instance that will not Terminate - if I try and terminate it, I get the following error:
Instance Operation Failed
Operation Terminate failed with message: AMAZON : You are not authorized to perform this operation.
Could you please manually delete this instance for me, because I am unable to move forward without being able to remove this instance.
Many thanks,
Ian

The first AWS account I used is a corporate AWS account. In this account my permissions were restricted, hence I don't think it ever fully prepared the instance.
The second AWS account I used, has a valid credit card attached, but, I can't switch it over to using this AWS account because I still have an Instance on the first account that I cannot, delete, remove, terminate. So until I can get rid of this broken instance, I can't do anything at all with the second AWS account.
Regards, Ian

Issues with CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA [developer edition]

Hi,
When I want to suscribe to the CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA, on the Terms and conditions page, even if I scroll down, the button "I accept" is not available.
Do you have any tips ?

I am trying to download the SAP BPM and Operational Process Intelligence on SAP HANA [trial edition] - AWS version and get a security error.
Any ideas where we can get a 90 demo version of SAP PO/PI that will work with AWS? I am trying to refresh myself on PI7.4?

SAP HANA Developer Edition on Amazon Web Services (AWS)

Hi All,
I have download SAP HANA studio, and Cleint successfully , I have also created Instance from AWS , I can see Instance is up and running brilliant , but to add system in HANA studio , we need to provide host name and user ID and password .
I am giving host as a my Instance IP address , I have tried with all possible user ID and password , I am still unable to connect my HANA Instance ( HANA server) from Studio.
Could you help me in this issue please .
Regards.
Hari.

Hi wenjun,
I am sorry for bothering you again. really desperate to know about HANA.
I have download the Putty.exe and Puttygen.exe in my system, pageant is already running .
when I say Open, I am getting this error .
after I say "YES".
I don't know this password , I have tried with HANAabcd1234.
but I am not lucky yet.
Pageant is already is working .
Please help me .
Kind regards
Hari

Extend CAL SAP HANA, developer edition 1.0 Rev 80

Hello Friends,
Does anyone know how and to whom we need to request for extending Demo license for some more time? If so, can you please share some information.
Thanks

Hello Adithya,
There is page in the Developer Center space explaining in detail how this can be achieved:
Developer License expired? You can get a new one. This is how...
Enjoy,
Ventsislav

Pre-Requisites for E_HANAAW142- SAP Certified Development Specialist - ABAP for SAP HANA (Edition 2014)

Hello,
Can you please provide clarification regarding the pre-requisite certification/s required for the certification-E_HANAAW142- SAP Certified Development Specialist - ABAP for SAP HANA (Edition 2014). The following is the pre-requisites' description from the offical webpage of E_HANAAW142 certification.
This certification is issued to candidates who successfully pass the certification exam for the "SAP Certified Development Associate - ABAP with SAP NetWeaver" (C_TAW12_70, C_TAW12_71, C_TAW12_731, P_ABAP_70).
https://training.sap.com/shop/certification/e_hanaaw142-sap-certified-development-specialist---abap-for-sap-hana-edition…
Question:
Are all the four certifications(C_TAW12_70, C_TAW12_71, C_TAW12_731, P_ABAP_70) need to be passed prior to taking up E_HANAAW142?
Or Any one of the four pre-requisite certifications is enough?
Advance Thanks.
-LG

Hi,
you have to pass only one exam from the listed ones.
regards,
Harald

Instance Types (for subscription package)

Hey guys,
how can I find out which instance types (i.e. how many instaces of which type/size) I need for a specific solution? Without having purchased the subscription package yet I am not able to see this. For example, I don't know which instances I need (minimum!) for the SAP ERP EHP7 on HANA SP6. This means I can't estimate which costs will be charged by AWS... and this means I can't make a decision to buy the subscription package.
You should really publish a list of supported instance types...?
Kind Regards,
Fabian

Hi Fabian,
every solution in CAL comes with a recommended instance type/size which has proven to be suitable for the generic use case. However, every user has different requirements so a smaller or larger size might work as well.
I just worked through the documentation that is already available for the various solutions both on SAP Store as well as on SAP CAL when you click on User Guide. Only some of the User Guides provide the information you ask for.
Therefore I've just worked through all solutions of the subscription package and these are the recommended instances sizes for the solutions of the subscription package:
IDES ERP 6.0 incl. EHP6: m1.xlarge
SAP BPM and Operational Process Intelligence on SAP HANA: m2.4xlarge
SAP CRM rapid-deployment solution - Landscape with ERP integration: 2x m1.xlarge
SAP CRM rapid-deployment solution for sales, marketing, and service (based on EhP2 for SAP CRM 7.0): m2.2xlarge
SAP enhancement package 7 for SAP ERP 6.0 on SAP HANA 1.0 SP6: (did not find, need to check. very likely around cr1.8xlarge)
SAP ERP 6.0: m1.xlarge
SAP ERP Foundation Extension: 1x cr1.8xlarge, 1x m1.xlarge, 1x m1.large
SAP HANA data mart discovery offer: 1x m2.4xlarge, 1x m1.xlarge
SAP HANA, platform edition 1.0 Rev 72 (HVM): cr1.8xlarge
SAP HANA, platform edition 1.0 Rev 72 (paravirtual): m2.4xlarge
SAP Kanban Process rapid-deployment solution: m2.2xlarge
SAP Mobile Apps and Infrastructure rapid-deployment solution incl. SAP Fiori: 1x m2.2xlarge, 1x m1.xlarge
SAP NetWeaver 7.4 Enterprise Portal on MaxDB: m1.large
SAP NetWeaver 7.4 usage type BI Java: m1.large
SAP NetWeaver Application Server ABAP 7.4 SP5 on SAP HANA 1.0 SP7: m2.4xlarge
SAP Supply Chain Management 7.0: m1.xlarge
Hope this helps. Let me know if this answers your question and don't hesitate.
Regards,
Hannes

Valid instance type for this instalation optiion are SCS, ER2, j2eedi, J2

Hello . I want to install a NW7.3 based BI system. I found reccomendation to start with ABAP instance an then start of Java central server installation
However I have checked option BI Java and additionaly I had EP, AS, EPC, and BASIC.
however on next screen I am asked about SAP system ID(I entered the ABAP installed one i.e. BI4)
However this gets recognized that BI4 is already existing after ABAP.
SAP system BI4 exists and is not suitable for this installation option. DIAGNOS: Valid instance type for this instalation optiion are SCS, ER2, j2eedi, J2eeci , but instance ASCS01 has different type
Solution: Choose a different SAP system ID or unistall the existing one
What to do?
Thank you in advace for help

Hello
Now when I have suceesfully installed both (java @abap systems) I wander how to connect them.
I red somewhere I should establish a JCO connection but I wander where
I found new netweawer administrator http://<host>:5<sysnr>00
JCO can be established via http://<host>:5<sysnr>00->configuration->infrastructure->JCO RFC provider.
But which programID to use and..
Is there somewhere some guide how to build BI out of this 2 (java @abap) systems. I only during java instalation entered users to get user communication between java@abap
Thank you in advance

SAP Community Developer Edition - Where/When is it?!

Hi There,
Does anyone have any information regarding exactly when we can expect to see the free "SAP Community Developer Edition" come out? I'm eager to start working with it.
I am referring to the edition found on this page:
[http://www.sdn.sap.com/irj/scn/shop?rid=/webcontent/uuid/50231945-230d-2b10-97a3-d275c52b9b0a [original link is broken]|http://www.sdn.sap.com/irj/scn/shop?rid=/webcontent/uuid/50231945-230d-2b10-97a3-d275c52b9b0a [original link is broken]]
Also if anyone can tell me if I'm on the right or wrong path in seeking this edition I would be grateful. I'm a .NET Developer looking into creating 3rd party apps to allow users to migrate into SAP more easily. I already have the .NET connector and the ES Explorer working, but i obviously need valid login credentials to use these tools, and I'm hoping that obtaining the SAP CDE will provide that for me.
Thanks,
Dan

I guess "the promissed non-expiry license" does not exist until now. Do you ever thought about using SAPLINK, to save your developing objects and reuse it on other systems?
If you want to develop again with a working system, just reinstall minisap and import your SAPLINK exports.

SAP Community Developer Edition - with limited lisence

Hi!
I recently downloaded and installed MiniSAP, or the SAP Community Developer Edition which supposed to have a permanent
license - but the SLICENSE shows me a 1 month limited lisence - which i know that can be extended for another 3 months, but it's a very short period (I want to use this home-SAP version to keep my own programs - instead of txt files that has no nevigation capabilities).
Does any body knows how can I get the promissed forever-lisence?
tia.

I guess "the promissed non-expiry license" does not exist until now. Do you ever thought about using SAPLINK, to save your developing objects and reuse it on other systems?
If you want to develop again with a working system, just reinstall minisap and import your SAPLINK exports.

Access code for SAP HANA dev center

Hi ,
Could you please let me know on how to get the Access code , which is a mandatory field to request for SAP HANA Dev .
Regards,
Nagaraj

Hi Nagraj,
From the [SAP HANA Developer Access page|http://www.sdn.sap.com/irj/sdn/sap-technology-innovation?rid=/webcontent/uuid/c022341c-5ed1-2e10-0b98-9b6a3314dd25],
During the Beta version of this page HANA sandbox system access is by invitation and limited to test and trial and its all the sandboxes systems are currently fully booked

ABAP for SAP HANA

Is there any difference in normal ABAP and ABAP for SAP HANA ? If yes , then please guide me how to proceed for learning ABAP for SAP HANA ?

Hi Ruchi,
There is a slight difference between ABAP and ABAP for HANA. If you are well aware of all ABAP concepts then you can easily understand the ABAP for HANA concepts.
Some of the differnce which I observed.
1. New syntax for Open SQL is introduced, which includes support for comma separated lists, enhanced string expressions, the definition of host variables in a more standard fashion, and fewer restrictions for joins.
eg: SELECT so.matnr, so.mtart FROM mara AS so INTO TABLE @it_mara UPTO 10 ROWS.
2.It uses the TOP DOWN approach so we can use HANA databases capabilities. you can get more information on this in this blog ABAP for HANA and "Code Push-Down"
3. CDS (Core Data Services) View, AMDP (ABAP managed database procedures) are again new features. Refer this document. http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b01089ed-dead-3110-f28e-caa12aeb5e27?QuickLink=index&…
Please go through this link It is helpful for you. https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0CCsQFjAD&url=http%3A%2F%2Fsapinsid…
If you want to learn more about ABAP for SAP HANA then please register for the self placed course on OPENSAP. Here is the link (ABAP Development for SAP HANA - Dr. Jasmin Gruschke and Jens Weiler). I have completed this course and it was very helpful for me to understand the concepts of ABAP for HANA, so I will suggest you to enroll for this course.
Hope this will help you.
Regards,
Sneha.

Right path for sap hana

Is this a right track for a fresher to get into SAP HANA?
I am sap abap consultant and have interest to learn sap hana...
According to me,I wanted to first learn sap bi through a small or local institute and the n go for sap hana training from Sap bangalore center
Is this the right track for me?
SAP ABAP--->>SAP BI--->>>SAP HANA.
Can anyone guide me about how much experience will be sufficient to gain sap hana?

If you do not have knowledge on SAP BW, BO, BI then also you can learn (career) in HANA. SAP pointed HANA as the in Memory DB as same as the place where all applications going to run in future. If you’re a person known to Database Concepts and having basic Knowledge of SQL will help you to learn SAP HANA at ease.
Since you are an ABAP Consultant the knowledge of ABAP will help you in understanding the business logic implementation. Do not think that ABAP is going to get wind up, it is getting powered by HANA with Smarter, Lighter and Faster that is called ABAP for SAP HANA. Good Career you find while learning HANA with ABAP. Chances of earning $80000 - $160000
Learning HANA Modeling is easy when you have knowledge of BW if not, you will get to it on the class.
You will get to know Business Objects concepts at the time of HANA ideas on Reporting, if you are known to it then you will find your way on HANA Reporting.
SAP Business Intelligence the DW operational tool which helps you to understand implementation ideas from Business Warehouse on HANA viewpoint. If you are not going to work on BW on HANA it is not necessary to learn SAP BI.
So it is not necessary learning SAP BI Before going to SAP HANA but Choose the Platform on which you have planned since there are various types of HANA Certification. If you have still doubts look into these words http://scn.sap.com/docs/DOC-39531 for better concepts or talk to top trainers for direct interactions at http://techjobs.sulekha.com/sap-hana-training

CTS+ for SAP Hana

I am going to set up CTS+ for SAP Hana non-ABAP development.
However, the same SAP Hana landscape also has ABAP development.
I think on tcode STMS I cannot have two transport routes with exactly the same DEV, QA and PROD,
i.e. we cannot have two transport routes as follows on STMS:
So how to set up separated transport routes for ABAP and non-ABAP development for the same SAP Hana
landscape?
Thanks!

Hi Christina,
For transporting non-abap objects using cts+, you can refer Transporting Non-ABAP Objects in Change and Transport System - Software Logistics - SAP Library
Not sure of any difference on hana platform.
Regards,
Divyanshu

AWS Instance Types for SAP HANA Developer Edition

Similar Messages

Maybe you are looking for