AX as a ADSL router & bridge - would this work?

I actually use a wired (ethernet) bound ADSL router, and an AXn wireless station, connected to the wired network, which includes an ethernet enabled laser printer and an MacMini used as a backup machine.
I would like to replace the ADSL router by another AXn, which would use its ethernet port as a WAN port and be connected as a remote WDS base to the existing AXn.
Basically this would look like this
Internet (WAN) <---> AXn (new) <........> AX (existing <----> wired ethernet network
1. Is this feasible?
2. How should I configure the wireless side of the new AX connected to the WAN ?
Thx in advance

2. How should I configure the wireless side of the new AX connected to the WAN ?
The new AXn's Ethernet port will need to be connected to your ADSL modem by Ethernet cable. If your ISP requires PPPoE credentials (username/password) in order to access their service, you would need to configure the AXn with these credentials through the AirPort Utility.

Similar Messages

HT204053 My husband and I both have iPhones but we only have one iPad. We use the same apple ID because we also share the same email address. How would this work with iCloud because we don't share the same contacts? Thanks Elainecontacts

My husband and I both have an iPhone and we share an iPad. We also share the same email address so how would this work with iCloud because we don't share all the same contacts?
Thanks

An icloud account is designed to be used by one user. That user can have all his/her devices synced with the same Apple data (email, contacts, calendars, notes, reminders, etc.) . When two people use the same account, then problems usually occur when one user edits data that the other user doesn't want changed on their device. You can continue sharing the same ID for the itunes account in order to share the purchased music, apps, etc. itunes accounts and icloud accounts are different.
It's by far better that each user has his/her own icloud account.

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only with wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only to wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

[WS-C3850-12S-E]---[WS-C2960X-48FPD-L]---[AIR-CAP2702I-x-K9] , Would this work?

Does the Cisco Catalyst 3850 support indirectly connected access points?
[WS-C3850-12S-E]---[WS-C2960X-48FPD-L]---[AIR-CAP2702I-x-K9]
Would this work in any way?

NO it will not work. AP must be directly connected to the 3850 for it to work in MA or MC mode.
Regards
Dont forget to rate helpful posts

Upgrade Error 1604 - Would this work to get iphone OS 3.0 running?

Last week, I tried to update my iPhone 3G with the new 3.0 OS only to get the 1604 error and what I had originally thought was a bricked iPhone. After some digging on these forums, I figured out how to revert back to the older OS. I found it on the internet, downloaded it, and then restored my iPhone using that. My question is, if I were to go about manually downloading the 3.0 OS from the internet to my computer, and then restoring my iPhone using it, would it work? My god, all I want to do is have the new OS on my iPhone! What the heck is going on?

I can send invitations and accept invitations through my Exchange Calendar, but not through my gmail CalDav?
Why would this be removed and not included? Is this feature going to be added next year and advertised as some new feature that other phones don't have, like cut and paste? My Dell PoctetPC from 2000 has cut and paste...
Come on Apple - listen to users and bring in all of the basics! You want this to be fully recognized in the Enterprise - CalDav meeting invites are going to be necessary!

PHP Code, Variables & CSS. Would this work?

Hello,
I am new to PHP, this is my first script I have made without any help, I am using xammp to test my site, but the basics of the code is this. I am adding an include code into the navigation menu and in the CSS I have defined certain rules for the nav. Now in the code when you click on one of the links, it will change the variable to a corresponding number. The Code is pretty much self explanatory.
Menu.php:
<?
$active = 1;
?>
    <ul>
      <li><a href="#" onclick="<? $active = 1; ?>" class="<? if ($active = 1){?>#navigation ul li a.active<? } ?>">Portfolio</a></li>
      <li><a href="#" onclick="<? $active = 2; ?>" class="<? if ($active = 2){?>#navigation ul li a.active<? } ?>">Web Examples</a></li>
      <li><a href="#" onclick="<? $active = 3; ?>" class="<? if ($active = 3){?>#navigation ul li a.active<? } ?>">Contact Me</a></li>
    </ul>
Menu CSS:
#navigation { text-align: right; font-weight: bold; text-transform: uppercase; font-size:14px; line-height:18px; height:70px;}
#navigation ul{ list-style-type: none; }
#navigation ul li{ display:inline; padding-left:15px; }
#navigation ul li a{ text-decoration: none; color:#fff; }
#navigation ul li a:hover,
#navigation ul li a.active { color:#ffe6a5; }
Now what I want to happen is when you click on one of the links, it will change to active, changing the color of the text to tell the visitor that, that link is active. Now normally I would do it though CSS, changing the texts rule to the active, but in order to be able to change buttons without having to do it though all the pages and also because I want to start using PHP more.
The Include works, as you can see below, but the code above does not work, because the home button should be a light yellow color.

I can't comment on your PHP, but you can achieve your desired result quite simply using this demo from Nancy.
http://alt-web.com/Articles/Persistent-Page-Indicator.shtml

I want to try and keep my iMac cooler , would this work ..?

My new iMac 24 inch is working fine , the only thing is its getting very hot on the casing at the top, I think this may be due to the fact it is working in a very hot room, the iMac sits on a nice and clear desk top well away from the wall , the room is well ventilated with all the windows open, but the room temperature get’s very hot and there’s no room air conditioning . I was wondering if I placed a fan on the desk top
To blow some air onto the iMac’s case , this may help reduce the machine from getting hot ..? . Where does the iMac draw its cooling air from , the bottom or top of the casing..? and do you think that putting a fan on the desk would reduce the iMac’s
Casing temperature in any way ..?

Is the ambient temperature within the operating limits stated for the iMac? (Operating temperature: 50°F to 95°F - 10°C to 35°C) If so, why worry about some Heath-Robinson cooling arrangment. If the heat is being dissipated out of the iMac then it's doing the job it's designed to.
If you look at the iStat Pro widget:
are there any that are actually higher than they should be. The metal case of the iMac acts as a heat-sink so it will feel warm in places whereas other computers may be far hotter inside but feel cooler to the touch.
mrtotes

Animation: would this work?

Say you want do make a cartoon, the old way. You draw all the cells, photograph them, and load them all in sequence into Imovie.
It won't play as a smooth animation because you can't reduce the screen duration of a still shot down to 1/25th of a second.
But if instead of taking a photo of each cell, what if you take a very short burst of video of each one, and load all those little video segments into Imovie. Then, you delete all frames of each segment except ONE. Shouldn't that leave you with a series of single frames, each of a different animation cell, that will run as a smooth animation when you hit play?
I wanted to ask before I start. It'll take a loooong time, I know.

... I want "Disney-smooth. ...Disney? that WAS the company doing cell anim, right....?
ok, the Disney classics as "Snowwhite" were painted every cell (not easy to get: the DVD has some "making of", showing the REAL Snowwhite.. forgot the actress' name, and how they used that as a blueprint for the paintings..), but most productions do 1:2/1:3 or higher.. the cheap Asian production do a mixture, they use realtime camera movements and some computer aided animations..... do some research with DVDs of your favorite, use the frame-forward-feature of your player, you'll be surprised
I can' recommend any good book (I'm sure, there are many), my knowledge is a collection from the last 30y I'm interest in that topic...-
happy painting, "Disney smooth" (<< I like that term!) is 24 paitings per second (doing that with video, you do 25/30fps)... maybe that is the true reason why the gave up that part of the company... besides: a shame! they earn enough money with the productions of Pixar...
I would spend some money on that boink ploink boom what's its name??... software......esp. "onioning" is very easy done with video+Mac...
A Mac is just a tool, but with your talent... probably, you'll be the next Carl Barks (ok, he never did animations, but he was THE BEST at Disney...), it was Georg Lucas, who said, he's afraid of these new "Garage Movie Makers". ;-))

I have Photoshop CS5, and use windows XP. I cannot open Bridge from photoshop, whichI have done for years. When I am in Photoshop,when it opens, I always click on the bridge icon at the bottom of the screen, and it puts me into bridge. This is not happen

I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years. When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but the problem remains. Looking for help. Dan

Thanks for your response, I was able to open bridge from File-Browse in Bridge. This worked, but was not able to go back to the way I always opened Bridge. At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu. The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal. This time it did not go back to normal after several attempts. I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens. And yes I am using Mini Bridge in photoshop CS5. Thank you for your help. Dan

To use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

I'm considering using Apple TV to connect to a projector in a church hall which does not have any internet access. I intend to use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

Welcome to the Apple Community.
Yes, that will be fine providing you don't want to play any protected content.

HT5569 My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?

My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?

If you have connected to other wi-fi successfully, then your wi-fi should be working. Try power cycling the router. Disconnect it from power for about 30 seconds and then restart it. After it has come back, try connecting again.

Airport express and Negear adsl router

I have a wi-fi netgear dg834g adsl router, which is connected to internet; my imac has not an airport card so it connects to the router with the ethernet port. Now, I have the airport express: what i'd like to do, is to connect my playstation (or pc) to the ethernet port of the airport express, but in another room. The poin is, Airport as to act as Wds and i know my router doesn't support it: but, if I buy another adsl router, or I add another access point to my router which supports wds, will it work? Cause on Apple support it seems you have to youse an airport base station only to do that. That would be crazy!

This is in the faq:
# Question: Can AirPort Express be used for a Wireless Distribution System (WDS)?
Answer: Yes. AirPort Express can be a WDS main, remote, or relay station. It can function as a WDS main whether or not you are using it as a router to share your Internet connection (NAT).
# Question: Can networkable game consoles and digital video recorders join my network via AirPort Express?
Answer: Yes, if you have the proper network adapters for your devices and have set them up properly. They can connect wirelessly when AirPort Express is your only base station or when it's in WDS mode. They can connect via wire when AirPort Express is a WDS remote (the reason for this is described in the next question). They cannot connect either way when AirPort Express is in client mode.
# Question: Since AirPort Express only has one Ethernet port, does it act as a LAN port, WAN port, or both?
Answer: Depending on how you have it set up, the Ethernet port can function as a LAN port (defined as either simple bridging or sharing your Internet connection via network address translation) or a WAN port (connecting to your broadband Internet service provider or upstream router). However, it never acts as both simultaneously in the way that the original AirPort Base Station (Graphite) can. When the AirPort Express is using network address translation, the Ethernet port acts as a WAN port. When it is set up as a WDS remote station, it can act as a LAN port. Assuming that your Internet service provider only gives you one IP address (the most common scenario for homes), this means that AirPort Express can only accommodate wired clients when acting as a WDS remote base station or bridge. Therefore, if you need to support wired clients and only want to get one base station (or router, as it's the routing capacity of AirPort Express that is relevant here), you should get the AirPort Extreme Base Station instead.
so maybe i'm right,but I want to be sure

Connecting AE to non-apple wireless adsl router (Belkin)

Hi,
I have an Wireless VoIP ADSL router (Belkin) that was provided by my ISP that I use for my home phone and Internet access. It is only a/b/g capable. I currently use it to wirelessly connect to the Internet and other computers on the wireless/wired network from my Macbook Pro. My Macbook Pro has my iTunes and music on it.
I am wondering if I can purchase the AE to plug in by my stereo and connect it wirelessly to the Belkin so that I can stream music to the stereo from the Macbook Pro via the Belkin (eg. Macbook -> Belkin -> AE). I would also like to use the Ethernet port on the AE by the stereo to connect a media center into the wireless network (the media center only has an ethernet port - no wireless built in).
If this won't work will I be able to just run the AE as a 2nd wireless AP and connect to it directly from the Macbook Pro when I want to play tunes through the AE? This would not be ideal as I would in theory only be able to connect to either the AE for music streaming or the Belkin for Internet access.
Can the Macbook connect to the Belkin via 802.11a or g for instance and the AE using 802.11n at the same time?
Thanks,
Graham

I am wondering if I can purchase the AE to plug in by my stereo and connect it wirelessly to the Belkin so that I can stream music to the stereo from the Macbook Pro via the Belkin (eg. Macbook -> Belkin -> AE). I would also like to use the Ethernet port on the AE by the stereo to connect a media center into the wireless network (the media center only has an ethernet port - no wireless built in).
Yes, you should be able to do this with the newer 802.11n AirPort Express Base Station (AXn). Because you have a requirement to have the AXn's Ethernet port enabled, you would just need to reconfigure the AXn as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

Could Cisco 1701 ADSL Router supports WIC-1ENET Card.

Hi,
I need advise as to if a Cisco 1701 ADSL router could support WIC-1ENET Card.
My 1701 Router has WIC 0 as ADSL and WIC 1 as ISDN, could the ADSL card be replaced by a WIC-1ENET. I noticed ,that the cards seems to be rivet onto the back of the Router and not connected with SCREWS as other routers would posses.
Could someone advised as to how i can have this router supports 2 Ethernet NICs or what could be your recommendations?
Thank you,
Cisco End User.

Hello,
the WIC-1ENET is supported on the 1701, but, AFAIK, only in slot 0.
It does not support 2 WIC-1ENET cards, only the 1720, 1750, and 1751 do, with a specific IOS release, check out this info from CCO:
WIC-1ENET- Support for two Ethernet WICs
The Ethernet WIC (WIC-1ENET) provides the capability to deploy additional Ethernet port(s) in a Cisco 1700 series routers. The initial release of the WIC-1ENET supported only one WIC-1ENET card in a 1700 router. The new IOS 12.2(2)XJ release offers the option of deploying up to two WIC-1ENET adapters in a Cisco 1720, 1750, or 1751 router. A total of three Ethernet ports can be configured. A typical application that requires three Ethernet ports involves using the built-in 10/100 Fast Ethernet port for LAN segment. One of the WIC-1ENET port could be used for high-speed broadband DSL or cable modem connection. The second WIC-1ENET port could be used for a DMZ (demilitarized zone) environment for deploying public Web servers or FTP servers. Hardware modification is not necessary to use the capability of IOS 12.2(2)XJ. The new IOS software is compatible with WIC-1ENET adapters already installed in 1700 series routers.
HTH,
GP

AX as a ADSL router & bridge - would this work?

Similar Messages

Maybe you are looking for