AX network not seen after restarting Win XP Dell laptop

I use AX as my wireless network, with another AX connected to the network to allow for transmission of music to my stereo. I am able to configure everything fine, connect to the Internet, print, and play music through all of the AXs. The problem arises whenever I restart the computer or wake it up from hiberation. I can't connect to the network, and the Airport Admin Utility doesn't see the Airport Expresses. The only way I can fix it is to hard reset both Expresses and reconfigure everything. Any suggestions?
Thanks,
Tom
Dell Inspiron 700m   Windows XP  

Try setting WEP to 40bits. YOu can use a 5 char plain text password. 128bits is more secure but less compatible with non-apple cards.
Reconfigure using a lan cable.
Connect using XP wifi manager. Afterwhich you can now use Airport Admin if needed.

Similar Messages

  • Airport network not remembered after restart or sleep after upgrading from OS X 10.5 to OS X 10.6.8

    I upgraded OS X 10.5.8 to OS X 10.6.8.  Now after sleep or restart my wireless network is not remembered nor automatically connected to.  I have to select "Other" and enter network name and WPA2 password each time even though "Remember this network" is checked.  Using Airport Utility 5.5.3. Other computer on same network but still using OS X 10.5.8 does not have this problem.

    You will need two things - the 10.6.3 retail DVD, and the 10.7 USB installer. Once you install 10.6, run Software Update to get yourself up to 10.6.8.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    http://www.amazon.com/Apple-Mac-Lion-Thumb-Drive/dp/B0089FELB2
    If you can go to 10.8 instead of 10.7, I'd recommend it. It's cheaper, and a much better OS (you get full iCloud functionality, for one thing).
    Matt

  • Time Capsule not mounting after Restart

    I have only used Time Capsule for 2 days. However, it does not mount after Restart. I have to manually go in to the Time Machine Preferences and choose it again as the backup disk. Is anyone else having this issue, or is that the way it is supposed to work? Please help.

    I can see where you're coming from. I have just invested in an iMac with iLife08 , iWork08 and .Mac
    I saw getting this Time Capsule as the logical last step in this splurge.
    I still have an old Dell desktop WIN 95 vintage which is still chugging along, VERY slowly, its specs having been increased way beyond what its makers ever planned.
    I think (hope) this Time Capsule saga is a bit of a blip, superimposed on software (Time Machine) which has not been fully ironed out yet.
    As you say, "Works straight out of the box" and "one click and thats it" are statements one took for granted with Apple,but with a big push coming from the suits, perhaps things are shipped too early.
    From what I had heard of Apple, I would have expected better.
    It was amazing to read the frustrations of Mac veterans in their efforts to get the Time Capsule up and going - and they appeared to know what they were on about.
    I have to admit that I wasn't quite sure at first what exactly I was installing, but settled for a wireless external drive on my existing network, which doesn't have any other Apple products.
    Even that setup has gremlins.
    I am hoping that soon one of the mags will devote a feature on clearing the decks and starting from scratch with DETAILED instructions. I found that the installation bumpf which came with this brick stopped at the point where things got tricky.
    Keep the faith!

  • PCI wireless card does not work after restart - FM2-A55M-E33

    Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
    BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
    I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
    Does anyone know more about this issue?

    Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
    ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
    ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
    ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
    And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
    I am unable to find any useful information in the logs.
    Got any more suggestions?
    Thanks! (And sorry to disturb so much)

  • How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

    How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • Panorama settings are not retained after restart.

    In 4.0, the Panorama settings are not retained after restart. The tabs that make up the Panorama settings are retained after restarting Firefox. Any suggestions?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

  • Changed Password Not working after restart[What to do]

    Recently I've changed my password, but it's not working after restart.
    I've noticed that, input option is not taking one of the password characters which is '!'.
    I've the recovery disks, system accepts my fingerprint too.
    Any help will be highly appreciated.
    Thanks.

    Hello,
    Let me explain you what happened.
    One evening I was trying to open my ThinkPad. Usually it asks for
    fingerprint or password(I'm not sure which password, power-on/hard
    drive). But this time I failed using my finger. and I tried with
    password, but could not recall.
    Then I restart and again tried with finger, this time it worked. Now
    after login in Windows XP I removed all old fingerprints and create
    few new. When I create new, it was asking for password, or new
    password to replace. As I could not recall the pass, I've given new
    password to replace.
    Now to check I gave a restart. Fingerprint accepted for Power-on but
    also asking for password again(Now I can see it's for Hard Drive). I
    tried with new password. But it's not working. And even not taking one
    character ('!') of the password.
    Now can you tell me, if I did change password for Hard Drive in the
    last description. Or is that possible to change it from Windows XP
    environment. Else it's possible that the Hard Drive password remain as
    it was which has been set from ThinkVantage before OS boot. Let me
    know if you've any query which I've missed.
    Thanks.

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • Digital Editions 4.0 will not open after installation on Windows  XP laptop.

    Digital Editions  4.0 will not open after installation on Windows XP laptop.  DigitalEditions 3.0 installs and opens fine.  Have tried 4.0 several times.  Removed 3.0 and 4.0, reboot, reinstall 4.0 still will not open.  Error message says Windows has experienced and problem and requires that Digital Editions must be shut down.

    Solved my own problem. It was necessary to delete all instances of Adobe Digital Editions in programs and  the registry. After doing so and reinstalling 4.02...., it became available in the "open with" dialogue box and became the default epub reader.

  • I have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop

    i have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop and i want to update my iphone4 to iOS 5.

    Things in this thread might be helpful too.
    https://discussions.apple.com/thread/3382814?start=0&tstart=0

  • Nano not seen after update

    Since installing the latest iTunes update my 4 gig Nano is NOT seen at all by my G4 iMac. I cannot even install the iPod update. I reset the Nano, did repair disk permissions, restarted the computer, nothing changed. Used a different USB port. Nothing changed.
    running OS X 10.4.7
    Allan

    Since installing the latest iTunes update my 4 gig
    Nano is NOT seen at all by my G4 iMac. I cannot even
    install the iPod update. I reset the Nano, did repair
    disk permissions, restarted the computer, nothing
    changed. Used a different USB port. Nothing changed.
    running OS X 10.4.7
    Allan
    After I wrote this question I went back to my computer and decided to do some additional troubleshooting. I tried some of the other USB ports and found that fianally the Nano was seen by the computer and I was able to update it with the new software with no problem.
    So now I know that I may have a problem with one of my USB ports in my iMac which may not be easier to solve but at least I have been able to get my Nano to work with my iMac.
    So I have solved my own problem - word to the wise - many times the solution to your problem is right in front of you if you take the time to do more troubleshooting yourself.
    Allan

  • AWR snapsohots not generating after restart of the instance

    oracle : 10.2.0.3
    OS : Linux 64-bit
    Issue : AWR snapshots are being generated after restart of the instance.
    I restarted the instance at 31.01.2010 8 AM CST.
    SQL> select STARTUP_TIME from  v$instance;
    STARTUP_T
    31-JAN-10
    SQL> select max(begin_interval_time)   from DBA_HIST_SNAPSHOT
      2  /
    MAX(BEGIN_INTERVAL_TIME)
    31-JAN-10 08.00.04.996 AMto my surprise the AWR reports are not being generated from 8 AM till now 8PM.
    What could be the reason ? Do I need to do any thing manual initiation ?
    Edited by: [email protected] on Feb 1, 2010 8:41 AM

    SELECT STARTUP_TIME     FROM DBA_HIST_SNAPSHOT WHERE STARTUP_TIME > TRUNC(SYSDATE);
    post results from SQL above

  • Certain applications will not open after restart or waking up from sleep

    My Macbook Pro running 10.9.2 won't open certain applications after restarting and sometimes after waking up from sleep. Google Chrome, Logic Pro X, Adobe Photoshop and Premiere seem to be the only progams affected. Firefox and Safari both work fine as well as many other applications. It seems to only affect programs that connect to the internet.
    After a period of time the issue will resolve itself; sometimes after a few minutes and other times after several days. Then, these applications suddenly begin working again. I have also been having issues with my computer's ability to wake up. My best guess is that my computer isn't "fully waking up" upon restarts or when coming out of sleep mode. Both of these issues began around the same time and could be related. I've had both problems for several months through multiple software updates.
    As far as troubleshooting goes I have done the following:
    Safe Boot - (all programs work but are not effective due to lack of drivers being utilized in safe mode)
    RAM/PRAM reset.
    Disk Utility/Repair Permissions/Verify Disk
    Any help or advice would be VERY appareciated.

    Robin,
    It sounds like your MacBook is logging out when the computer goes to sleep if you are getting the login window, which will of course close all your programs.
    In System Preferences >Security, uncheck "Log out after.....minutes of activity".
    See if this stops it from doing that.

  • Average Active Sessions graph not updated after restart

    Hi,
    I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
    I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
    I also tried to clearstate and restart the agent but no change..
    Any idea?
    Thanks

    This is a bug and can be solved by applying
    Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
    This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
    Eric

  • DataSource not available after restart

    Hi,
    I have created a new JDBC driver for MS SQL Server 2005 and a custom data source that is using the JDBC driver and that is connecting to my database. Upon creation of the data source, the data source is shown as available (green) and works fine.
    However, when I restart my system, the data source is still there, but is not available (red). When I delete the data source and create it again, it works fine.
    Does anybody know why the data source might be not available after the restart of the server? Any help would be highly appreciated.
    Best regards
    Holger

    I don't know what I should change in the MS SQL Server. And as the DataSource works correctly once I have deleted and recreated it, I would have thought that the problem is somewhere with the application server.
    A colleague of mine is using the same application and is having the same problem, although he independently created his system.
    Best regards
    Holger

Maybe you are looking for