Ax service is not being start

ax service is not being start in my laptop after restored data of the production
server.
error is

ax service is not being start in my laptop after restored data of the production
server.
error is
This forum is related to SQL Server not AX services. Please post in relevant forum. Please don't post one line incomplete question if you cannot show any effort to ask good and clear question why should we put effort ?
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Similar Messages

UM Service Does Not Initially Start

Hi, everyone!
Whenever our Exchange 2010 server is restarted, the UM service will not initially start. However, it will start when I then go to manually start it.
Based on the error logs, it seems like it may have something to do with DNS. The error mentions how 10.4.50.1 resolves to an invalid FQDN. 10.4.50.1 is the IP address to the PBX Gateway, which is the address entered into Exchange's UM Settings. No where
in the settings did I use the FQDN, which is why this error does not make sense to me.
I'm wondering if it's simply the service trying to start too soon prior to the network connection being fully established? We're running this on VMWare 5.5. Also, this PBX Gateway is across a VPN, but it's not an accessibility issue as all other traffic
to the Gateway is flowing properly.
I was hoping someone may have an idea on what to try.
It's not a huge deal because I wrote a PS Script that will check if the service is running and attempt to restart it, if it's not. This solves the issue, but it's more of a patch then a plug and I'd rather have things operating "normally."
Thanks in advance for any suggestions!
-Eric

Alright... well, we had to reboot the server and I checked when the server started back up to verify that the UM service started properly. It still did not, despite being set to Delayed Start now.
So I'm back to being unsure of what to try. I set my PS Script to run at startup and it checks every 15 minutes to ensure UM is running.
It's more of an annoyance that I'd like to not have, but again, not the end of the world.
If anyone else has any ideas, I'd be really grateful.
Thanks!

System error 3 OracleDBConsoleorcl service could not be started.

Hallo!I installed Oracle 10g on my Windows XP while connected to my modem that accesses the internet via DHCP.
I installed the Microsoft Loopback Adapter to force my OEM and isqlplus to use the static IP 10.0.0.1.
When I try to launch my OEM via http://joey-xp:1158/em (hostname joey-xp resolves to 10.0.0.1),I am unable to launch OEM.
From the cmd prompt,I type emctl start dbconsole.
C:\Documents and Settings\JOEY>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://127.0.0.1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleorcl service is starting.
The OracleDBConsoleorcl service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.
I don’t understand why the default loopback (127.0.0.1) is being used.
How do I solve this?
Thanks.

Thanks zekeriya but unfortunately using
emca -dbconfig dbcontrol db
does not help.
The system error 3 still appears.
Thanks.

Apple Mobile Device service could not be started. (-2146959337)

I keep getting the error "Apple Mobile Device service could not be started because an unknown error occurred (-2146959337). After I hit OK, it says "This iPod cannot be used because the Apple Mobile Device is not started." I have tried starting the service by going into Services, but it just tells me "Error 5: Access is denied." I have reinstalled iTunes, Quicktime, and Apple Mobile Device service multiple times, but I still get the same error. I had an iPod nano that worked fine, but now that I got an iPod touch, it gives me this issue every time I connect it.

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

AMDS for Windows
http://support.apple.com/kb/TS1567

BI Scheduler Service is not getting started

BI scheduler service is not getting started and showing this error
Could not start the oracle BI Scheduler Service on local computer.
Error 1064:An Exception occured in the service when handling the control request

Refer to Oracle Business Intelligence Infrastructure Installation and Configuration Guide.
Chapter 10 discussed configuring Oracle BI Scheduler.
The steps include:
Create a scheduler schema.
Create tables in the scheduler schema using scripts.
Updating configuration options in Job Manager.
Updating the config files: instanceconfig.xml & credentialstore.xml.
Start the Oracle BI Scheduler.
If all goes well, the BI Scheduler should start.

CVP 9.0 (1) - VXML Server service is not getting started

Hi
I am installing a CVP 9.0(1) in my lab and the VXML Server service is not getting started; It throws the below error.
From CVP Error logs, I see the following the snippets.
13: 172.16.13.147: May 29 2013 11:53:55.937 -0700: %CVP_9_0_Infrastructure-0-START: No Subsystems have been started. Have you configured your server yet? ; Make sure <CVP_HOME>\conf\propFileList.properties is loading "system" and that <CVP_HOME>\conf\system.properties lists at least one subsystem to load. [id:1033]
Could somebody please suggest on how to fix it.
Thanks,
Jayaprakash

It should run in Evaluation mode
Each VXML Server requires a separate license, even if the software is installed on the same machine. The
VXML server license is tied to the IP address. If you change the IP address of the server, then you must request
for another license.
When you start VXML Server without an active license (for example, the license is missing, invalid, or
expired) it logs a message to the application server console and startup log to indicate that you need to activate
the license. However, you can still use an unlicensed installation of VXML Server with up to 30 simultaneous
sessions for evaluation purposes. To utilize more simultaneous sessions, activate a valid license of VXML
Server.
You need to look for logs here startup error (C:\Cisco\CVP\VXMLServer\logs) and the OAMP logs
Regards,
Senthil

Hyperion OpenLDAP service is not getting started

Hi,
Need urgent help.
The Hyperion S9 OpenLDAP service is not getting started on windows server after unexpected restart of the server. I am getting the following error
" Windows could not start the Hyperion S9 OpenLDAP on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 21."
I have tried running the recovery exe "openLDAP\bdb\bin\db_recover.exe". But still unable to start the service.
I am using Hyperion 11.1.1.3 version.
Regards,
Sunil.

Have a read of http://john-goodwin.blogspot.co.uk/2008/08/bring-back-my-openldap.html
If you still have issues then you would need to restore from a file backup
Cheers
John
http://john-goodwin.blogspot.com/

ADFS 2.0 service does not automatically start after reboot

Hello,
We have two ADFS 2.0 servers in a farm. Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start. If I manually start the service it starts within 10 seconds.
The error in the logs show:
A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
The AD FS 2.0 Windows Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
But after the reboot is completed, I can manually start the service with no problems. Again, this ONLY happens on restart. I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
Any ideas?

UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service". I re-entered our ADFS service account username and password, it was
accepted, and I rebooted. On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot. I then changed it back to the named domain service account, and the issue came right
back. There are no other errors in the System Log indicating a problem with anything else.
So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot. But what?

The OracleDBConsoleORAHAS service could not be started.

Dear All,
I installed Oracle10g on Windows XP system successfully but when I am going to start the dbconsole it gives the following error.
C:\oracle10g\product\10.2.0\db_1\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://MOHAMMAD-HASHIM.ROSHAN.AF:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleOR
AHAS service is starting.
The OracleDBConsoleORAHAS service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
Can anybody help me out from this?
Thanks in Advance
Hashim

Check the following:
- You must to add your hostname in your etc/hosts file of this way
127.0.0.0 hostname.domain hostname
- Check the availability of the port 1158. For this check
telnet hostname 1158
- Check the log files of dbconsole. Normaly exists a log directory in this location
ORACLE_HOME\sysman
- Check that the listener and database is up
Regards

My iTunes opens in safe mode but when I try to sync my ipad? It says apple mobile device service could not be started because an unknown error occurred 1084

It says apple mobile device service could not be started because an unknown error occurred 1084

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

TS1567 Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all my disap

Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!

Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

CWMLS daemon manager service could not be started

Hello,
Our server in which we have installed Ciscoworks LMS was restarted due to power supply problems. After that "CiscoWorks Daemon Manager" service is not getting started. I've tried to stop all the ciscoworks related services and restart it, also tried restarting the server machine. Ciscoworks LMS Version 3.0, installed on windows 2000 SP4. The error message is:
E:>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
I've changed casuser password using resetCasuser.exe file, but there was no change.
Any clue?

Hi ,
Please attach the syslog.log ( If it is huge in size then truncate and send me some of the Lateste logs..)
--Screen shot of the services.msc winodw ( with all the cisco works service)
--Go to start >control Panel >Administrative Tools > Event Viewer > open the Application logs and send me the screen shot of the lastest event ..
In the mean time try this :
go to services.msc > change the startup type of the Daemon Manager to MAUNAL from Automatic and
ReBoot the Server ... Once server is back online > change the startup type back to Automatic and Try to Restart the Daemon Manager .
Note : Please make sure the IIS Admin service is Disable
Thanks
Afroj

TREX - http service could not be started

Hi Experts,
After installing TREX on a windows server in a Portal scenario the
Httpserver/Webserver is not starting up.Could you please help to
analyze
and resolve this issue.
Symptom:
TREX httpserver is showing red in the "Services " tab of the TREX Admin
tool.
The following are some of the actions i performed
1.Applied note
1029783 - TREX 7.0 Httpserver does not work in 64 Bit Windows
1981642 - TREX http service could not be started
2.Executed the steps as its from the below link
http://wiki.scn.sap.com/wiki/display/TechTSG/TREX+WebServer+is+not+starti
ng+up
after doing all these still i'm unsuccessful.Could you please help me
in
solving the issue.
Thanks,
Satheesh E

Hi,
Please refer to below detailed guide,
http://wiki.scn.sap.com/wiki/display/TechTSG/TREX+WebServer+is+not+starting+up
Also check logs for errors and add them also.
Kind Regards,
Johan

The OracleXETNSListener service could not be started.

I have just installed OracleXE but the listener wont start. This is the message I get when trying to start the server:
C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
The OracleXETNSListener service is starting.
The OracleXETNSListener service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>
Any good ideas??

Hi Jer
There is no listener.log in that folder, I assume it is because it is initialized the first time the listener starts. The only file in the directory is sqlnet.log, it contains this information:
Fatal NI connect error 12641, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 05-SEP-2006 16:32:13
Tracing not turned on.
Tns error struct:
ns main err code: 12641
TNS-12641: Authentication service failed to initialize
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Also after reading a lot of posts on this forum, I have tried to write:
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-SEP-2006 08:02
:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1053 not found; No message file for product=NETWORK, facility=TNSTNS-125
57: Message 12557 not found; No message file for product=NETWORK, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
TNS-00527: Message 527 not found; No message file for product=NETWORK, facility=TNS
Maybe this can cast some more light on the situation??

Ax service is not being start

Similar Messages

Maybe you are looking for