AX stops working, but worked fine before

I should probably start this thread off by saying I'm at a university, and have had trouble with my AX in the past. Up until this weekend everything worked fine, but now I cannot connect to the internet. I know that our school network has an authentication page where I have to enter my given ID and pass to access the network, and if I disable the distribution of IP address in airport admin utility, it reaches this page fine and allows me to connect to the internet. When I try to distribute I can't connect to the internet, and even copy/pasting the address of the authentication page gives me nothing. Any suggestions?

This is a commonly reported issue for users of the Airport Express on university networks. You are going to have to ask your university's network admins whether it is even possible to connect a router to their network. Sometimes this is possible simply by registering the hardware ethernet (MAC) address of the Airport Express's ethernet port with them. However, if your university's network requires a more elaborate login and verification process for which the admins are unwilling to bend the rules, there isn't much you can do about it - other than to continue using your Airport Express as a simple wired-to-wireless bridge device.

Similar Messages

Shockwave Flash Object Suddenly Stopped Working but Works in IE

I am using a shockwave flash object (mp3 player) that has been working in Firefox for months but now has suddenly stopped working. The player doesn't even show up on the webpage.
The odd thing is that this player shows up and works perfectly in IE but other browsers exhibit the same problem as Firefox.

We're in the process of figuring this out with Google. I've read reports that the Chrome beta channel does not have this problem, but your mileage may vary. Please see this Chrome bug report for details.
https://code.google.com/p/chromium/issues/detail?id=288935

Links to excel file on safari page suddenly stopped working, but work in firefox. Happened yesterday. Help!

I have a webpage with links mapped from an icon to two excel files. They aren't working. I checked the html. it is identical to two links to .png files and the location is correct, but nothing happens when you click the link. I have reset, emptied cache and thrown out the plists,
The html reads:
<img usemap="#Curio_Map" src="Steps%20in%20Detail(3D691625).png" />
<map name="Curio_Map">
<area href="Assets/7B8E04AB/Strategic%20Planning%20Detail%20Dairy.xlsx" shape="polygon" coords="455,66 844,66 844,296 455,296" >
<area href="Assets/18C769C4/Initial%20questions%20for%20Strategic%20Planning.xls" shape="polygon" coords="14,71 431,71 431,293 14,293" >
</map>
The Assets folder is in the same folder as the index.html page with frames and the page within the frame.
The html for the .png files that do work is:
<img usemap="#Curio_Map" src="Supporting%20Doc(698C969A).png" />
<map name="Curio_Map">
<area href="Assets/9D8D3352/P%20of%20PDSA%20Altresco.pdf" shape="polygon" coords="22,126 102,126 102,192 22,192" >
<area href="Assets/F5E05A53/Access%20Environment%20Altresco.png" shape="polygon" coords="21,45 103,45 103,88 21,88" >
</map>
Look the same to me! Why does one work and the other not, and why did it happen all of a sudden? Any thoughts?
Dan

It sounds like the page has somehow got stuck in the cache of
a server
somewhere. Delete the file from the server, and then call the
page.
Hopefullt you should then get a 404 error. Then FTP the page
back. This
should hopefully clear out the cache.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Lightning adman" <[email protected]> wrote
in message
news:etcmlf$cj3$[email protected]..
> we have a problem that has got our web developer
stumped....and i'd really
> appreciate it if someone could shine some light on
possible reasons.
>
> The page in question is the "Where to Buy" page which
lists links to our
> suppliers. Its worked perfectly for years until recently
when, even though
> the
> file is updating correctly on the server, its not
updating when the page
> is
> viewed in a browser.
>
> I have downloaded the file onto three separate
computers, using different
> net
> connections (in different towns even!). The downloaded
file shows the
> correct
> info yet the only version that appears on the web is an
old version that
> has
> inaccurate info.
>
> I have tried uploading the files back to the server but
same result. i
> have
> also tried loading other info to the server and that
does work in the
> browsers.
>
> What should i be looking for to try solve this puzzle?
>
> thanks in advance
>
> adam
>

Screen on Equium does not work but is fine on an external monitor

My notebook will no longer display on its screen. I can only display on an external monitor.

Did you check if the display output was not set to the external monitor?
Sometimes something like that can happens if you accidentally switch to the second monitor with the FN+F5 key combination.
But as mentioned above it sounds like a display or a fl inverter malfunction

Wi-fi on iMac not working, but works on other laptops

Hi there,
I've recently moved back home with my new iMac, and when I went to try to set up wi-fi on it for the first time, it didn't work. I received a message that "Wi-fi has the self-assigned IP address ____ and will not be able to connect to the internet.". I don't understand why it's not working when I'm currently typing this from my macbook pro which connects perfectly fine, as well as my iPhone, and my parents laptops as well. The wi-fi worked perfectly fine at my old placres
I've tried resetting my modem and router, restarting my computer, turning wi-fi on and off, deleting the keychain access for the network, and tons of other suggested solutions but to no avail. I also just tried manually imputting my IP and that told me it connected, but the network icon still showed an exclamation mark, and I wasn't able to load any websites.
Needless to say, I'm extremely frustrated about this, and nothing seems to work. Are there any other solutions I can try? I really don't know what would be causing this.

When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

Mapping not working, but works in debug

Hi everyone,
Got a strange problem with a simple mapping. The mapping does a Truncate of the target table and then must insert in that table from a view. The view via a dblink. When I run the mapping in debug everything seem fine, it does what it is meant for. Then I run the same mapping from the design center or in a workflow, it does the truncate table but do not insert any row and return with success (apperently no errors). When run directly from the database it does fine.
How to find out where is the problem.
Thanks for you help
Jacques

The mapping consist of 4 operators : a constant for the name of the table (the staging tabke) to truncate, a premapping (WB_TRUNCATE_TABLE), a view from the production side via dblink with the data to insert into a staging table.
a very basic mapping, then of course other mapping will load and transform into a target table(fact table).
If i run the mapping in debug in owb it does the job and data is inserted into the staging table, when run from the package generated in the db it works fine, but when i run from owb design center or in his processflow (at night) nothing but the truncate gets done.
By the way this mapping has always worked till I decided to test another view that instead of bringing back all the data from production, it returns a delta instead, so basically just a WHERE CLAUSE was added to the old view.
Database version 10.2.0.4
OWB : 10.2.0.4.36
Hope this helpfull
Thanks
Jacques

DVD not working but works in Sim

My project was completed in Final Cut and exported in Compressor. Imported all assets into Studio Pro and after setting all required settings, I burned the DVD. The DVD will play for 28:30 then freezes. The simulator works beautiful with viewing all the way through. I have tried completely rebuilding the project twice in studio pro but to no avail I get the same result 28:30. I have another sequence in the same final cut program and that one stops at 5:03. I am running out of time for this project and need to get it out the door.

Where does the final DVD fail? Set top DVD Player? or DVD Player Application on the computer?
Did you try just opening the Video_TS folder with DVD Player Application prior to burning it (i.e. from the hard drive)?
If it works on the computer, but not on a set top player, then you probably have too high a bit rate at the point where it fails. What settings did you use in Compressor? Another possibility is bad media but if you tried it several times and it fails the same place each time, that's not very likely.

MyRIO standalone application not working, but works well when connected to PC (NI vision + webcam)

Hi,
I have a program that can detect motion that occurs in my room using a webcam and will send a picture to my gmail account if motion detected. The program works fine when myRIO is connecting to PC (with the webcam connects to myRIO). However, after I created a standalone application, it's not working. Even the VIs within the first frame of the flat sequence (turn LED on) was not working. The standalone program will work if I disable all of the vision-related VIs. Any suggestions? Thanks!
I got the driver installed and the webcam connected, so that shouldn't be an issue.
Thanks in advance.
-Robin

I have a 30 GB version of the same. I also got some external speakers for it, UBL I think they are called. I find there is something very odd about whether you charge it up or not. It seems to over-charge sometimes, and then everything freezes. As for connecting to the PC, no chance. After an initial burst on another machine, and after installing itunes on this computer, there is no recognition of the one by the other at all. Plus freezing and locking up. Plus freezing the PC as well, it is very tedious. So no answers, only commiserations. I think Apple are doing a very poor job on this ! And their help facility seems quite hopeless !

Importing .p7b certificates using certutil does not work, but work with IE. I need to automatize certificate installation. Help!

Hello,
I have to add a trusted certificate authority to XP machines to allow use of mail via OWA.
There is a domain, but there are too remote machines which are not in the domain (and it's on them I'm experiencing the problem).
Domain sysdmin sent me the .P7B certificate, which I can load withour problem using import with IE. The certificate is stiored in the Trusted Root Certificate Authorities and it's all ok.
But I need to automatize the certificate import due to the hifg number of these clients as well as the linbe spped (very slow graphic), so I found the certutil utility.
I've tried with several commands (like "certutil -f -v -addstore root filename.p7b" or "certutil -enterprise -f -addstore NTAuth filename.p7b" and several variants), but the utility always said that the certificate is correctly imported, but when checking
with the MMC console I can't find it (and, by the way, trying to load again results in also being notified that the certificate is already loaded!), so all the stuf does not work.
What should I do to be able to import the .P7B in Trusted Root Certificate using command line (.bat file, of course)?
Many thanks in advance for any help!
Max

Hi,
As i can understand you want to import a .p7b file which is a chain of certificates. And certutil is not working.
I too had the same issue. After searching and thinking the alternatives for hours, got a solution which worked for me. Here is it.
Get certmgr.exe tool available with MS .net framework tools.
Try adding this to your batch file
certmgr -add -all -c "File.p7b" -s -r localMachine Root
where File.p7b is the file containing certificates. You can replace the name with your file name.
Check if its working.
Thanks,
Reyaz

Why my cronjob for primary/standby server not work, but worked at prompt

I have redhat linux version 5, oracle servers 11gr2.
I have cronjobs to monitor tablespace usage and alert logs.
However they not work at the cron job, but if I execute them at the command prompt, it worked.
What might be the problem?
example of the cron script:
Head of the script:
#!/bin/bash
. /u01/app/oracle/bin/hydev_env
MAILTO="dba.com"
LOG=/u01/app/oracle/dba_cron/out/tablespace_90_full.html
echo $ORACLE_SID
sqlplus -S <<-EOF >>/dev/null
/ as sysdba
Cron job set is like this:
#------------------------TABLESPACES Check------------------------------------------------------------------------
0,35 * * * * /u01/app/oracle/dba_cron/scripts/tablespaces_over_90%.sh >/u01/app/oracle/dba_cron/out/tablespaces_over_90%.log > 2>&1
Vi /var/spool/mail/oracle:
Has error like this:
/bin/sh: -c: line 0: syntax error near unexpected token `2'
/bin/sh: -c: line 0: `/u01/app/oracle/dba_cron/scripts/chk_ora_alert_all.sh >/u01/app/oracle/dba_cron/out/chk_oracle_alert_all.log > 2>&1'
Any guru help?

Hello;
Generally this is an environment issue.
The script works at the command prompt because when you signed on your user picked the environment settings from a profile, for example .bash_profile.
A crontab job has no environment. That is why you call hydev_env near the beginning of the script. So something of some things are missing from your env file mostly likely.
What I do is keep an environment file for each database at a location like this :
/u01/app/oracle/dba_tool/env ( /u01/app/oracle/dba_tool/env/PRIMARY.env )
The file PRIMARY.env is <database_name>.env
What I keep in it is everything I need that a background job like crontab would need :
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=PRIMARY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=
Important If you are not sure of a setting on your system type "env" at a Linux prompt while logged on as the user where the script works. Change as needed in your .env file.
Here a script I call from crontab to check tablespaces
#!/bin/bash
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . quickcheck <DBNAME> "
exit 1
fi
# Set the Environmental variable for the instance
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
$ORACLE_HOME/bin/sqlplus /nolog <<EOF
connect / as sysdba
@/u01/app/oracle/dba_tool/bin/quickaudit
EOFNotice how I pass the db name as a parameter to the script so I can use the script with several database without changing it.
/u01/app/oracle/dba_tool/bin/quickcheck.sh PRIMARY
The crontab to make this run daily at 5:12 am is :
12 05 * * * /u01/app/oracle/dba_tool/bin/quickcheck.sh PRIMARY > /tmp/quickcheck.out
Best Regards
mseberg

DNS is wrong on vista pc so Internet does not work but works with iMac iPad PS3 using time capsule 1355...can not change settings on the pc vista..

I Hooked up time capsule ..set all the passwords. Works with iMac and iPad and PS3 . But vista say it needs to reset adapters. But does not work..show dlink router setting even though dlink is not connected. And has a different code...help

Is Vista computer running wireless or ethernet?
Is it plugged directly into the TC? If it is possible and you are running wireless please do plug it by ethernet directly into the TC to test.
Wireless is known problematic on Vista.. has always been so.
Is IP statically set on the vista computer??
show dlink router setting even though dlink is not connected
If this is wireless.. then please delete all the old wireless configuration.. and start afresh.

Cs4 serial number doesnt work in tiger / but works in snowleopard

HI,
I have a G5 and a MAC BOOK pro.
1. I bought G5 and CS2
2. I bought the CS4 upgrade / both were running on the machine
3. I bought MAC BOOK PRO / I unistall / deactivate / and erase CS4 from G5 and install in my MAC BOOK PRO
4. I bought CS6 I uninstall CS4 from MACBOOK
5. I am trying to reinstall CS4 on my G5 Tiger / it does not work / but works in MACBOOK
So If I deactivate / uninstall and erase
what could happen???
Thank You very much!!!

programs may not install or work if there's a failure of your system to meet specs (here are the cs4 program specs, System requirements | CS4, Point Products), but serial numbers don't succeed/fail based on system specs.

Safari works at home, doesn't work at work!

I do not understand why Safari does not work at work but works fine at home. I am on LAN at work and on airport at home. Sites load very slow, and in most sites, which require login or filling forms (yahoo mail, mapquest, bank sites etc) take forever or do not load at all. ( I dont think my work will have filters for mapquest and apple!) For example, I tried to login thrice in apple discussions after which I gave up and am now writing from Firefox. Reset Safari solves the problem sometimes, but I don't think I should be doing this everytime I go to a site.
All the sites work in Firefox, and also they work in Safari from home
ANy clues?
MacBook Pro, iMac G4 Mac OS X (10.4.9) MBP, 2 gig memory

The "disappearing" affect you describe is not normal. You may need to reinstall Safari.
First, try removing the Apple cookies from your Safari Preferences>Security>Cookies panel. Also, go to your Safari Menu and Empty cache. Then try to log-on to Apple Discussions.
Also, regarding the "disappearing" effect, try Safari from another User Account.
Here is guidance from Apple on how to set up the account. You can ignore step 7 in the article.
Also, on the system preference>Accounts panel, click on "log-in" options. There, select "fast user switching". This allows you to go back and forth between user accounts via an icon in your Menu Bar at the top of the computer screen.
Log-on to the new account and start Safari. If Safari is stable in the new account, then your problem is specific to your regular user account. Otherwise, similar response means a system-wide problem.
Post back with results.

My iPhone 4s has suddenly stopped making a noise to tell me new emails have arrived, this was after an ugrade to IOS 7.1.2. It worked fine before and I didnt change anything but it just stopped dinging. I have checked Settings-Sounds

My iPhone 4s has suddenly stopped making a noise to tell me new emails have arrived, this was after an ugrade to IOS 7.1.2.
It worked fine before and I didnt change anything but it just stopped dinging when I got a new email.
I have checked Settings-Sounds & Settings-Notification Centre and everything looks fine.
It worked ok a couple of weeks ago but not after the latest update - anyone know why?

Thanks Lawrence
I omitted to say that it only occurs when the screen is locked - if I'm looking at something on my phone when an sms or email arrives, the phone 'notifies' me with a sound but doesnt do it when its screen is locked. Email messages and sms's (texts) still arrive but I get no sound to tell me they have.
The MUTE swith is in the correct place and I have tried resetting the phone with the Home and Sleep buttons several times, still to no avail.
I have noticed on the forums that many people are suffering or have suffered the same problem but Apple are never forthcoming, of course,

So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have ev

So I was updating iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions

Are you following these instructions?
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

AX stops working, but worked fine before

Similar Messages

Maybe you are looking for