AX X 2 - second not working - trying to extend network

I have a AX connected to amy router and this works fine connecting to the internet. I also had another AX extending my network upstairs (+ printer connected to it) and they both worked fine. Recently my internet access speed has been not great so I reset both AX. Now the one connected to the router is working fine but when I try to extend the network with the other AX during set up it asks me to switch networks and I have to say yes to proceed but then it does not pick up the main AX so I cannot get it to extend the network.
Any ideas

i advise you to link the express that can not be seen up via ethernet cable, this will make it visible in the airport utility, once the settings have been put back and the WDS set back up, then u can put the ethernet cables + airport express back to the way they were before the reset.

Similar Messages

Timed Access not working on Airport Extended Network

I've had an Airport Extreme wirless networking working fine except for some wifi disconnects at the far end of my house. So I bought an Airport Express to extend the network. I'm got the Airport Express configured and running an extended network. Everything shows "green" in the AirPort Utility, but it required me to set the Timed Access option to "Not Enabled". If I enable Timed Access on the Airport Extreme, the Airport Express dissapears from the AirPort Utility and starts flashing the amber light.
Is it possible to configure an extended network that continues to support the Timed Access restrictions?

Well,
I succeeded in making it work. Yes it can work!!
Yesterday I had a brainwave. You have to put the mac adress of the airport that extends your network also in the timed access table.
My timetable looks like this:
default: access from 06:00 - 22:00
Devices that have an exception:
My ipad: every day, all day
Airport Express: every day, all day
The trick is that you have to use the mac adress of your airport express of the WiFi interface. The airport has 2 mac adresses one for the wired and one for the WiFi. First I used the ethernet mac adress.
So now it works like a charm.
Success!!!!!!!
BTW: You only have to enter the timed access rules in one airport. It propagates further to the "extenders"
Message was edited by: jeroen.vd.poll

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I downloaded, ran and restarted, tried to install Pro got same error
Thank You!
Robert W. O'Rourke
Tesla Systems, Inc.
<phone # removed - kglad>

ICloud for pc not working tried everything

iCloud for pc not working tried everything ( uninstall - reinstall - delete files - old versions ) nothing helps it just downloads a couple of photos and off again my iPhone uploads perfectly as all the pics goes to the iPad seamlessly, Please Help i'm on windows 8.1 x64, Thanks

I think that the card reader may in fact be defective, but it just doesn't make sense if I have already used it fine before. I've tried everything on this Apple support page, thank you though.
Does anyone have any suggestions?

read-timeout-seconds not working

(WL 5.1, SP 11)
Hi all,
I'm playing around with Read-Only entity beans, and I get a problem
with the read-timeout-seconds property. I've set my
weblogic-ejb-jar.xml like this:
<ejb-name>product.entity</ejb-name>
<caching-descriptor>
<max-beans-in-cache>1000</max-beans-in-cache>
<cache-strategy>Read-Only</cache-strategy>
<read-timeout-seconds>60</read-timeout-seconds>
</caching-descriptor>
The first call to the EJB caches the database record, and subsequent
calls use the cache. My problem: Even if I delete the database record
directly (I know, I shouldn't do that... but like I said, I'm playing
around here... ;)) and wait for more than 60 seconds, the next call to
the bean still returns the same cached entry.
I tried with <idle-timeout-seconds> set to 60, and it doesn't work
neither.
I've seen in previous messages that this problem (or similar) was
fixed in SP4, but I use SP11, so it shouldn't be the problem.
Thanks for your help!
Phil

Hi,
Have you invoked any Services before calling the Business Service.
If Yes, then the problem with the Invoked service.In this scenario even if you set the time out period it will not work..
If No, your request payload is high
Regards,
Kiran

Eject key not working - Tried another keyboard

Suddenly my eject key is not working. I have tried holding it for several seconds. The eject logo shows up on my desktop. Itunes can open the drive, toast can open the drive, eject menu can open the drive. A second aluminum keyboard will also not open the drive.
Since the drive can be opened by software, I need to know what system file to open and what code to look at so I can fix this thing I have read lots of temporary fixes in the forums here (use iTunes or the menu extras eject script) but I want a real solution. It used to work and I want to know why it stopped.
Is there a way to examine keyboard mapping or something??
Thanks
Message was edited by: Peter Mars

Apple authorized service provider has replaced the logic board due to various weird problems including sudden loss of startup chime, freeze on waking from sleep and memory issues.
During the repair event (it was an event let me assure you!) the service people noticed the Superdrive was plugged into the number 2 position on the ribbon and since there was nothing in the number one spot, the eject key didn't work. I had tried holding the option key while pressing eject (for drive position 2) but that didn't work either so not sure if switching to connector #1 or new logic board solved this problem, but the DVD tray now opens and closes using the Media Eject Key!!!

My ipad will not workit trying to back up from icloud and wil not let into settings

help my ipad will not work keeps trying to up date icloud and will not let me log in

I think I understand what you mean so try this and see if it lets you get back into your settings.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Want to set mailto for google apps;tried editing the gecko...mailto.2.uritemplate as per instructions found on web; set 3 related config values to "true" as per instructions; does not work; tried javascript method without success

I want to set the mailto app for google apps gmail.
I tried editing the gecko...mailto.2.uritemplate as per instructions found on web (https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s.
Set 3 related config values to "true" as per instructions (network.protocol-handler.expose.mailto ; network.protocol-handler.warn-external.mailto ; AND, third, gecko.handlerService.allowRegisterFromDifferentHost.
Does not work, no Google Apps in the mailto app spot.
Tried javascript method in address bar without success:
javascript:window.navigator.registerProtocolHandler("mailto","https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s","Google Apps GMail")
Any light anyone can shed will be appreciated. Cheers, jlf

Great howto Steve! This further increased my understanding of the MVC patterns used by BC4J.
Some remarks:
[*]Select New Business Components...
This should be 'New Business Components Package', or you won't be able to add business components.
ename as "Name",
sal as "Salary"
from emp
where empno = ?That should be deptno.
[*]Select the EditEmpsInDepartment view objectThat should be EmpsInDepartment.
Greetings,
Ivo

Flash 9 Does Not Work- Tried EVERYTHING

I tried everything from uninstalling, using the standalone,
deleting registry keys, using the ocx files, EVERYTHING. I'm tired
of "This is the answer" posts on internet, which did not work for
me, even though I follow the direction word-for-word.
Anyone else share the feeling?
I can't use anything- youtube, aim....
i think i'm going suicidal.

Try this first: Instructions for uninstalling and
reinstalling the Flash Player:
1. First download the uninstaller to your desktop from here
http://www.adobe.com/go/tn_14157
2. Before running this uninstaller be sure to read the
instruction and close all running programs.
3. Open the following folder
C:\WINDOWS\system32\Macromed\Flash
4. Run the uninstaller
5. What files are left in this folder?
C:\WINDOWS\system32\Macromed\Flash
6. If there are files left, delete the Flash folder.
7. Install the Flash Player from here:
http://www.adobe.com/go/getflashplayer
8. Test the Flash Player here:
http://www.adobe.com/products/flash/about/
If the Flash Player did not install properly, there may be a
permissions issue within your Windows Registry. Please login as the
Administrator (NOT a User with Admin privileges) and follow these
instructions to open the registry.
Warning: The following solution involves the Windows System
Registry. Editing or manipulating the registry incorrectly can
result in serious system damage which may require re-installation
of the operating system. If you are not comfortable editing the
registry, then take your system to a professional. If you choose to
proceed, then it is essential that you create a complete system
backup and a Windows System Restore Point before proceeding. Adobe
Systems cannot be held responsible for damage resulting from this
information.
1. Select Start > Run
2. Type in “regedit”
3. Right click on HKEY_CLASSES_ROOT
4. Select Permissions
5. Select Advanced
Compare your permissions with the ones in this screenshot.
Reply with any differences that you see.
http://www.supportflash.com/vista_key.png
Please do not use Microsoft’s SubInACL took unless you
know for sure that the system registry permissions is the issue.
SubInACL has been used on Vista successfully, but if you need to
find out more information, like is it officially supported on
Vista, please contact Microsoft.
http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e39 27b&displaylang=en

Clamshell mode not working, tried every possible way

Grr, this is getting so frustrating. I have tried every possible method, even following apple's guides. None of them work for me. I even tried the "boot" method the guy told me about in the last thread, and that still didn't work!!!
I have both my bluetooth mouse and keyboard hooked up right now, and it is not working . What would you guys recommend I do next?

Just to make sure, are those the instructions you followed:
http://support.apple.com/kb/HT3131
If you have, do you happen to have a wired keyboard and mouse to try it with - that would rule out any possible bluetooth problems. If you haven't, try the ones in the link I posted. Also, are you using the correct cable connections/ports?

HT1926 Have been using itunes for windows fine, but download recent itunes 9/2012 then itunes APPCRASH for itunes not working trying to launch downloaded material in TV section of itunes

Have been using itunes fine, but download itunes update 9/2012 cause tv material in itunes section to not work and view material, solution? Saw APPCRASH on problem section Also, my daughter's ipod nano ( second version with elongated screen) is not recognized by itunes? solution? Thank-you

Have been using itunes fine, but download itunes update 9/2012 cause tv material in itunes section to not work and view material, solution?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I can't unlock my Ipod touch sliders not working tried restore

Tried everything to unlock my ipod touch restore turning off ,screen is unresponsive

Did you enable voice over? as Unlock slider will not work normally and seem to be unresponsive.

IPhone 5 mobile internet not working - tried everything

Mobile internet on my iPhone is not working properly, regardless of the protocol (edge or 3G). It's the strangest problem possible and so far I've tried everything to fix the problem, but nothing helps.
Here's the deal:
- when I switch from wi-fi to 3G/E, everythings seems normal (there's the sign 3G or edge on the screen), but there is no internet connection
- I have to go to settings, switch off 3G and switch it back on and the internet starts working. It solves the problem also if there's only edge signal, which makes it even more strange.
- when I switch back to wi-fi and then again back to mobile network, the same problem occurs and the same solutions applies
- the same happens when I drive in my car and the phone switches between two carrier's antennas or if I switch on the airplane mode/reset the phone
I've used the iPhone since it came out and had every version, so I consider myself an advanced user. In order to try to solve the problem I tried everything possible:
- checked cellular data information
- reset network settings
- restored the phone
- updated the iOS
- manually deleted cellular data and entered it again
- went to my carrier to get a new sim card
- had the carrier analyze the problem on a case study (I sent over location data and time), but they found no mistakes on the network
- went to Apple and got my iPhone replaced TWICE
So I eliminated the following:
- settings error
- carrier error
- hardware error
The only thing I have left now is the exorcist.

Same issue

Audio Not working, tried everything...

My sound hasn't been working for a couple days now, I've tried the HP vidoes and Forums and done everything (restores, re-installed the audio, etc.) and nothing has fixed the problem. When i scroll over the audio symbol it has an X on it and says "The Audio Service is not running". I right click, choose 'Playback' and it shows the Speakers and 'Stereo Mix, Realtek High Definition Audio' are disabled, I click 'Enable' but it does nothing. I've gone into Computer Management and right clicked 'Windows Audio' and hit Start but a box pops up saying 'Windows could not start the Windows Audio service on Local Computer. Error 1079: The account specified for this service is different from the account specified for other services running in the same process.' Please help, I have online homework to do but I cannot hear the video!

Start with looking at THIS. If that does not do the trick, then follow the steps in THIS thread.
If all that fails, look at this YouTube VIDEO.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

AX X 2 - second not working - trying to extend network

Similar Messages

Maybe you are looking for