AXAJ: support for old versions of browsers?

Technilac preview version supports IE7, FireFox2 only.
Are there plans for supporting old versions in future?

IE 6.x support for ADF faces rich-client components..
(there is no plan yet to support IE 6)

Similar Messages

  • SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

    If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
    "SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
    I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally.  Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
    Below is a SOLUTION (WORKING) !
    Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
    1) "HP Software Framework"
    2) "HP Service" [no typo - a real plain name]
    If not running, set Properties-->Manual and click "Start", make sure both are running.
    Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
    Should work from within Windows environment.
    Notes:
    a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
    I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
    b) After done, don't forget:
    *) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
    **) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled.  The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
    BUT nobody is requiring you to disable anything though.
    The solution merely states the fact:
    These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
    Simply restartung them solves your problem.  Usually
    Ya'll have a good day and enjoy!
    ===========
    BELOW ARE IMPORTANT WARNINGS:
    1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER.  DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
    2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
    3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware.  In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
    So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
    Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
    ===
    Stan M. Starinski, MSEE.

    Hello Ceramics.
    Your ProBook is an Enterprise model.  It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product.  Here is a link.
    Have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • How do you turn off compatability view for old version of windows?

    How do you turn off compatability view for old version of Windows?

    Refer to this article:
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/TS1489

  • How to get item field values for old versions?

    I need to be able to query old field values from previous versions of items in a SharePoint list. I can't execute code on the server (it needs to work with SharePoint Online/O365 for a start).
    So far the ONLY API I've that lets me do this is the lists.asmx GetVersionCollection SOAP call.
    This lets me specify a single field name and returns an XML structure with the values for the various versions, along with the modification time and who made the change - but NO reliable way of actually identifying *which* version (i.e. an ID or label). That
    is, if I know I need to fetch the Title value from version 512 ("1.0") of item 1 in list "Documents", I don't see how to reliably parse the results to determine which entry is version 512. While they may be returned in order, in many cases
    the entries are actually missing when there was no field value present (or perhaps when the field hadn't been created yet). I've tried comparing the Modified date to the Created date of the corresponding FileVersion item (which I can get via CSOM or REST),
    and while it works some of the time, it's not reliable. I've also looked at the output from the lists.asmx GetVersion API but I don't see how that's useful either, as the Created property for all versions always seems to be just the date the file was originally
    created.
    It does seem odd to me that there's not a neat way of doing this - if I need to return information for several fields but just for a single version, I have to make a whole lot of requests that return far more info than I need, and then I need to figure out
    how to parse the returned text in the case of, say, multiple-value taxonomy fields etc.
    Anyone tried doing anything similar here?
    Thanks
    Dylan

    try these links:
    https://support.office.microsoft.com/en-us/article/Track-and-view-version-information-for-SharePoint-list-items-2d69d936-fb0b-4c84-830e-11708e6ec317?CorrelationId=f87cf6ea-8cbf-446a-a4a0-e2c3a86b3425&ui=en-US&rs=en-US&ad=US
    https://social.technet.microsoft.com/Forums/en-US/e48ff216-7ed1-4b20-9f21-d496b1583eea/how-to-get-item-field-values-for-old-versions?forum=sharepointdevelopment
    http://sharepoint.stackexchange.com/questions/20019/get-meta-data-from-a-previous-version-of-a-document-through-webservice-in-moss-2
    http://sharepoint.stackexchange.com/questions/121594/getting-information-from-previous-versions-of-a-sp-list-using-csom
    Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

  • End of support for DB version 10g r2

    Hi All,
    can any 1 tell me till when we have Extended end of support for below versions
    Oracle 10g r2 Database  10.2.0.3
    Oracle 10g R2 Application server  10.1.2.0.2
    Oracle 10g R2 Client 10.2.0.4
    Oracle 10g R2 Forms & reports developer tool set  10.1.2.0.2
    Oracle 10g client (desktop) 10.2.0.4
    Thanks & regards. 

    You'll can find information under:
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000632622&
    SEM 4.0 is in NW2004, do the end of Maintenance in March 2010. The extended Maintenance in March 2013
    Others info in:
    https://websmp106.sap-ag.de/upgrade-nw
    Regards,
    Sergio

  • BAPI_SLSRVAPS_SAVEMULTI2 not supported for simulation versions?

    Hi all,
    Bapi BAPI_SLSRVAPS_SAVEMULTI2 is not supported for simulation versions, do you know any other way to create sales orders in simulation versions, except from copying the active version into a simulation version?
    Kind regards,
    Stefan Hemeryck

    Thnks a lot for your answer Siva.
    But this function module is not triggering the forecast consumption in the version.
    Do you know how to trigger forecast consumption for the simulation version?
    Kind regards,
    Stefan Hemeryck

  • How can I get instructions for old versions of Garage Band please, eg Garage Band 3 and Garage Band 6?

    How can I get instructions for old versions of Garage Band please, eg Garage Band 3 and Garage Band 6? thanks

    meredithfromkybybolite wrote:
    How can I get instructions for old versions of Garage Band please, eg Garage Band 3
    http://manuals.info.apple.com/en/GarageBand_3_getting_Started.pdf
    meredithfromkybybolite wrote:
    and Garage Band 6?
    GB6 is the latest version, so all current docs should directly refer to that.

  • Remove Enhanced DCS Deployment Support in additional installer for old Version

    How can I Remove Remove Enhanced DCS Deployment Support in additional installer list for old labview Versions.
    I installed labview 8.5 after installing labview 8.2 and I make a project and create setup for it but when I build, it has problem. it need labview 8.2 install directory (i.e. C:\National Instruments Downloads\LabVIEW\8.2) but I have removed It from my PC,I think I must remove labview 8.2 Enhanced DCS Deployment Support to solve this problem. How Can I do it.
    thanks

    Dear Jeniffer
    Only I checked these items:
    NI LabVIEW Rutime Engine 8.5
    NI-VISA Rutime 4.2
    see attached pictures.
    thanks
    Attachments:
    Additional Installer1.JPG ‏103 KB
    Additional Installer2.JPG ‏94 KB

  • Support for Old Vibrating Sample Magnetometers

    Hello.
    I am a relative newcomer to LabView and I am trying to get some support for a few older Vibrating Sample Magnetometers (VSM) on behalf of my employer.  These machines are quite old and, although they have GPIB connectivity, I am having difficulty in being able to control them using LabView.  Although they use the IEEE-488 GPIB standard, they were built before the introduction of the Standard Commands for Programmable Instruments (SCPI), rather than the newer 488.2 standard.  As such, they work with their own proprietary commands, which are proving impossible to find.  I have a working LabView program that was written by a university student for a master's degree in physics.  However, I cannot communicate with the individual components, such as the gaussmeter, power supply, etc, using measurement and automation explorer.  They don't even respond to an "*IDN?" query without timing out, which I thought was standard.  I have tried lengthening the timeout time and tried to use drivers for similar instruments.  My question to anyone out there is, do you have the drivers or the programming manual for any of the components listed below?  The Vibrating Sample Magnetometers were built by the now defunct DMS/ADE.  The current owners of DMS/ADE can offer little support for such old equipment.  Likewise, is there something else I can try in lieu of these drivers and commands? 
    Devices:  1.) DMS Model 1660 VSM, 2.) DMS/ADE VSM Model 4, which includes the DMS/ADE model 32KP gaussmeter with its own GPIB port.
    Thank you for your time,
    Liam

    Hi Liam,
    As per GPIB 488.2, as I already mentioned, the ibEOSchar under Ibconfig is an 8 bit value so it will take value from 0 to 255 for which 3 number width is sufficient. Measurement and Automation Explorer also works in the same way. EOS byte value under Termination Settings section of GPIB settings accepts a decimal number from 0 to 255 and it will not allow any character and also value more than 255 as its field is limited to 3 numbers and even if you enter a value more than 255, it will be automatically changes to 255.
    So, As per 488.2, You cannot give both carriage return and linefeed characters together and you cannot use the same in MAX also.
    Try framing your entire command with EOS as per built in LabVIEW carriage return and linefeed functions and use GPIB Write.vi to send this entire frame. It may work.
    Also, I would like to see your VSM's communication manual and understand how these commands have been implemented.
    Coming to IBEOS command, its easily understandable and its used to Configure the end-of-string (EOS) termination mode or character. It have low byte and high byte.
    Low byte is always an 8 bit EOS character and high byte can take three forms which are A, B and C. Also High byte can have values with combination of A,B or C.
    For Example, ibeos (ud, 0x140A); means, Configure the software to end reads on newline character (hex 0A) for the unit descriptor. Here high byte is a combination of A and C where as low byte is the HEX equivalent of ASCII Line feed character.
    Regards,
    Naresh Narra

  • How to validate a request for old version

    Hello all,
    I have a current 11g database. But I need to validate a request for *9i release 2* version (knowing that I do not have the old version in my hands).
    How I can validate if the following request correctly work in 9i release 2 ?
    SELECT MocID, MocUpdateDate, MocKeyFldValues, MocIsNew, MocPolitique, MocOrder, MfcID, fld.FldSql, MfcOldValue, MfcNewValue, MfcNewFldID, MocNewObjID
    FROM MetadataObjectChange moc JOIN MetaDataFieldChange mfc ON moc.MocID = mfc.MfcMocID
    LEFT OUTER JOIN Field fld ON mfc.MfcFldID = fld.FldID
    WHERE (moc.MocObjID = N'000000000000152b' or moc.mocNewObjID = N'000000000000152b')
    AND MocMdtID = N'00000000000364c2'
    AND UPPER(MocKeyFldValues) like N'%DOC%'
    UNION ALL SELECT MocID, MocUpdateDate, MocKeyFldValues, MocIsNew, MocPolitique, MocOrder, MfcID, fld.FldSql, MfcOldValue, MfcNewValue, MfcNewFldID, MocNewObjID
    FROM MetadataObjectChange moc JOIN MetaDataFieldChange mfc ON moc.MocID = mfc.MfcMocID
    LEFT OUTER JOIN Field fld ON mfc.MfcFldID = fld.FldID
    WHERE (moc.MocObjID = N'000000000000152b' or moc.mocNewObjID = N'000000000000152b')
    AND MocMdtID = N'00000000000364c2' AND (UPPER(MfcNewValue) like N'%DOC%' OR UPPER(MfcOldValue) like N'%DOC%') ORDER BY MocID
    Thank all & best regards
    Adrien

    973391 wrote:
    Yes but my problem is I haven't a 9i version ... and my client (who have this version), doesn't answer and cannot provide me an access to its database (production too ...)
    there any emulator exist?When I first started in this business in 1981, I got some words of wisdom from a programmer who at that time was at the same point in his career as I am now. I'll pass that wisdom along to you.
    If you are working in a warehouse, and the foreman says his top priority is to get a certain trailer unloaded but he doesn't allow you to use the forklift, then getting the truck unloaded is NOT his top priority.
    The unresponsive client has access to the database. The unresponsive client has the query they want 'verified'. It's just a SELECT statement .. doesn't modify any data. Your issue is not a technical one. It is a political issue.

  • Acrobat X support for older version plug-ins

    Hi,
            We have some plug-ins, which were created for acrobat version 7, later we upgraded them to support acrobat 8, and 9 also.
             Now with the release of acrobat X, we want to support this latest version also, is it possible to support all the versions(acrobat 7 through acrobat X)?
            and if it is possible, for doing so, what additional changes required from implementation/development point fo view.
           Can anybody give elobarated details please,
    waiting for reply,
    thanks in advance,

    Adobe no longer supports Acrobat 7 - so I can't comment on that.
    However, building a plugin FOR WINDOWS - that works on Acrobat 8-X is no problem.  You simply need to use the Acrobat 8 SDK and be aware that you can't use any newer APIs.
    On the Mac, however, it's a problem due to changes in their architecture with 8->9.  Acrobat 9 & X share the same plugins.

  • Because you do not leave a short cut for old versions in the sites? Do not understand that the updating can bring us unpleasant surprises and perhaps it be necessary to do a downgrade of version?

    New versions not always work for all. Put in Your sites, '''CLEAR''' and '''of QUITE VISIBLE form''', a '''short cut''' for the '''old versions'''.

    Please be aware that anything except Firefox 10.0 and Firefox 3.6.26 don't have the latest security fixes, and Mozilla really doesn't want any other version to be downloaded. That is why Mozilla doesn't provide links to download any other version.
    You can get Firefox 3.6.26 from here: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Do iTunes have a section for old versions on their website?

    Just wondering whether Apple have a section on their website where you can download older versions of iTunes directly from them? I had to go to another site instead, I did post about this but it was removed (as only software licensed and distributed by Apple can be posted here, didn't realise I was breaking a rule!). The software I did download was certainly genuine Apple iTunes software, but was just wondering if Apple did indeed have an old app section and if not, why not? Would save people relying on other sites (which could well be dodgy if not investigated properly), particularly when their own software updates spectacularly fail?
    Message was edited by: PrettyP0isoned

    Thank you, but I see that there are massive gaps in releases? I know for a fact there should be a version from January 2011 (10.1.2) in that list that would save some people reverting all the way back to version 9. Would be helpful if they listed all releases! Shall mark it as resolved for the basic fact that it did answer the initial question, but would like to see Apple allow downloads of more recent "old" versions!

  • Compiling for old versions

    i have the jdk5 (1.5.0.. whatever) and it wont run on a 1.4.2 RE, is there any way i can compile for an old version without just having 1.4.2 on a different machine and compiling on there (or having a lot of versions of it on this machine)

    The -source option of javac lets you specify the version of source code accepted. And using the -target option will generate class files that will work on VMs with the specified version.
    Check documentation for details:
    http://java.sun.com/j2se/1.5.0/docs/tooldocs/solaris/javac.html

  • Will my serial number work for old versions?

    I am a teacher and have a newer version of the software than my students do. I would like to demo in the same version they use, but it is no longer sold - will my serial number work for older versions of the same program?

    No, the serial number is tied to the version/license you purchased.  Can't you acquire the software in the same way that your students have to?

Maybe you are looking for