Axiom 25 and Express Questions

Hi guys!
Ive got some questions about syncing up my M-audio axiom 25 to Logic. My goal right now is to be able to write bass and drum parts (addictive drums) into the piano roll in write mode using the midi controller.
1. first off how do I make the rotary controllers, say B1 to command logic to change the quantize parameters for when i'm writing drums in piano roll. turning clockwise will change the quantize value from 1/4 to 1/6 and counter clock wise will turn from 1/4 to 1/3.
2. After that, how can I set B2 to transport left or right in piano roll (clock wise counter clockwise) so the playhead can move to the quantized value, which would allow rests.
3. How can I set so my keystroke hits are placed between a certain velocity range? Like notes i play can only sound between 100 and 127 velocity.
4. Could you maybe give me some other cool functionality ideas for syncing the two up for my work environment? Im sure there are things I haven't thought of because im new to the whole concept of a MIDI controller.

Hi,
i don't know the Axiom, so maybe i'm wrong.
First, read the chapter on Control Surfaces in the Manual. Especially the Learn function (CMD-L) which can quick assign functions to a midi controller. Maybe this is all you need to get the knobs'n'buttons work. Select the function in Logic by clicking on it, press CMD-L and move the desired controller. That's all there is. You can, however, assign it manually in the control surface setup.
The second thing is the velocity range. This can be done afterwards with the transform function.
Usually i don't say this, but: Have a look in the manual. The tasks you want to perform are very specific, and it would be a long run to explain every little step here. However, feel free to ask if you have further questions
Fox

Similar Messages

Variable and Expressions Question?

I got these questions from a practice book based on sections that talks about learning SQL
and SSIS. It does not have a Key to grade it. Does any of the questions I answered look wrong(I answered in orange)?

#5 is not correct, the answer Windows->Locals is correct
Arthur
MyBlog
Twitter

AEBS Graphite & Snow and Express Questions

Just moved my mac mini into a refinished basement and now am having drop out problems with the AEBS Graphite & Snow (it's now having to go through several walls, carpet and a new ceiling). The Graphite & Snow is on the main floor, where the cable modem is, and where it has to be since my wife's work computer is there; her PC cannot be wireless on account of work security.
I was wondering if getting an airport express would help strengthen the signal, since it can be used as a range extender?
Or would getting a new Airport Extreme serve the same purpose as adding an Express to an older model Graphite snow?
Thanks in advance for any replies.
SBurke

orka wrote:
I was wondering if getting an airport express would help strengthen the signal, since it can be used as a range extender?
The problem is that the Graphite and Snow can't be extended wirelessly. Even WDS isn't an option with them.
... her PC cannot be wireless on account of work security.
Typically silly IT nonsense. Do their meetings require Maxwell Smart's Cone of Silence? (What???)
I suppose they don't allow cell phone use either.

Coming over from the dark side.....many questions...Extreme and Express

My 1st apple product was the iPhone so now I believe!
Recently, I purchased an Airport Extreme 802.11n from eBay.
Question #1: Are there two versions of the Airport Extreme 802.11n? How do I know if I have the dual-band version? From the Airport Utility, I can choose the 2.4Ghz or 5Ghz band but not both. I can see that there is a "b/g" compatible mode but what does it mean if I choose the b/g compatible mode? It seems that I have the older 802.11n Airport Extreme model?
I also purchased a used Airport Express b/g model. I thought it was the "n" model because it looks like the "n" model (all white). I have a bad feeling that this does not have the WDS feature. If this is the case, does that mean I can't use this Airport Express to extend the Airport Extreme Base Station?
Can I use bridge mode wireless to extend the wireless signal in my home although I will have two wireless ID's in the home? Basically, with the Extreme and Express that I have now, can I set it up to extend wireless coverage in my home?
My Extreme is currently on 7.3.1 because 7.4.1 is not stable. My Windows pc's disconnects all the time.
My Express is on 6.3.

Hello westladog. Welcome to the Apple Discussions!
Are there two versions of the Airport Extreme 802.11n?
There are actually three "versions." Here they are in "oldest" to "newest" order:
o Non-Gigabit Ethernet (Part No. MA073LL/A)
o Gigabit Ethernet (Part No. MB053LL/A)
o Dual-Band (Part No. MB763LL/A)
Based on your description, you have either the non-Gigabit or Gigabit version.
I can see that there is a "b/g" compatible mode but what does it mean if I choose the b/g compatible mode?
That would mean that your AirPort will support both 802.11n and 802.11b/g wireless clients simultaneously.
I also purchased a used Airport Express b/g model. I thought it was the "n" model because it looks like the "n" model (all white). I have a bad feeling that this does not have the WDS feature.
Both the newer 802.11n or older 802.11b/g versions of the AirPort Express Base Station (AX) support WDS ... so either could be used to extend the wireless range of your 802.11n AirPort Extreme Base Station (AEBSn).
Can I use bridge mode wireless to extend the wireless signal in my home although I will have two wireless ID's in the home?
With a WDS, you will only have one "wireless ID." The AirPorts use the term "Network Name." It is also known as a SSID.
Basically, with the Extreme and Express that I have now, can I set it up to extend wireless coverage in my home?
Yes.

Issues while building formulas and expressions

Hi,
I have a couple of questions regarding the formulas and expressions in MDM. It would be a great help if someone could us on these:
<b>1</b>.While creating a Syndication map in MDM Syndicator, we need to do some calculation on some of the attributes/fields and need to store results in new Custom fields. The problem is when we create a new Custom Item and use Formula to create a formula like <MM Number:mm number> * 12, it is showing us result in Destination Preview as 100*12 rather than computing the value as 1200. The same is the case is for UOM conversion where we want to convert inches into feet. Can we do such such asthmatic calculations in syndicator? Is there any other way to get the same result?
<b>2</b> Calculated Filed Expression Builder screen for any table field in Console has Attribute List option always disabled. Only the Fields list is available on this screen. The same is the case for Validation and Assignment builders in Data Manager. Is it possible to select Attributes as well while creating Calculated field Expressions (Console) Validation and Assignment Expressions (Data Manager)?
We are using MDM 5,5 SP4 Patch01 on Windows XP Professional.
Thanks for your help.
Regards,
-Irfan

Hi Irfan,
1) If you want to use formula like 100*12 and want to get result than syndicator is not for this.This kind of formula should be used in Data manager. Custom field in syndicator is not for this purpose. When you want to add and custom field in your output file which is not present in your current display than with the help of Custom field, you can see that field in Destination Preview.
Follow below link for more clarification
<a href="http://help.sap.com/saphelp_mdmgds55/helpdata/EN/28/52a8a6076d4979b08c27c7ca3aab8d/frameset.htm">Custom Fileld in Syndicator</a>
Hope this helps,
Regards,
Ron
Reward point for helpful answer
Message was edited by:
Ron

Rules Manager and Expression filer on XE

Has any one installed Rules Manager and Expression filter on an XE database? Would love to check it out on XE. Looks like it is not pre-installed. I was able to run the install scripts. I noticed one error though. It seemed to indicate jvm is not installed on XE. Tried to locate initjvm scripts. Either the script name has changed in XE or it is not there. This is a quick question in case somebody has gone down this path. I will post more details soon when I get sometime to look at the full log.

Read the post about javavm. I could not find the post where Tom has said it would be very problematic to install javavm on XE. I guess Rules Manager and Expression filter on XE is not possible or very difficult.

Connecting Extreme and Express via ethernet to both transmit

Hi,
I have a brand new Airport Extreme and Express set up in my house. At the moment the Express is wirelessly extending the range of the Extreme and also serving Airtunes to my Stereo.
My question is can I connect the Airport Extreme and Express via ethernet so that they both transmit a wi fi signal. Or can the Express only connect to the Extreme wirelessly when acting as a network extender?

I figured it out after I did the post.
I plugged them both in to the Ethernet but instead of having the Express extending the Extremes network, I set them both up with the same Name and Password to act independantly as an Active Roaming network.
Now my laptop just picks the one with the best signal as I roam the house and you don't even notice it change Airport.
My Airtunes is now hard wired as well.
thanks.

Slow Wi-Fi connection with both Extreme and Express

Hi all,
I have problems with slow Wi-Fi connection at home. With my 100/100 Mbit/s fiber I have an Airport Extreme 802.11ac connected by Ethernet cable directly into the cable modem.
With only the Extreme as a router I was not satisfied with the Wi-Fi range and therefore also bought an Airport Express 802.11n (2nd generation ) to extend the network with.
The range got better but I'm facing real slow Wi-Fi connection both on the Extreme and the Express.
Example - When connected to the Extreme less than 1 meter from it I normally get a down speed on 30 Mbit/s and on the Express (placed 8 meters from the Extreme) I normally get between 2 to 8 Mbit/s down speed.
I have a couple of questions about this issue below that I hope someone can answer.
1. The Extreme and the Express are connected wireless. If I connect them together with cable instead, will I then get the same speed from the Express that I have on the Extreme?
2. I've read in several forums that the latest versions on the Extreme and Express causes bad Wi-Fi connections and an downgrade to earlier version is recommended. My problem is that Airport Utility only can find the latest versions when trying to downgrade (bought both of them recently).
How can I downgrade to earlier versions when Airport Utility can't find them? If possible, is this still recommended to do?
Current versions:
Extreme - 7.7.3
Express - 7.6.4
3. Could it cause problems if the Extreme and Express doesn't have the same versions, or is this normal?
4. Any suggestions to improve the down speed on my Wi-Fi connection?
Thanks in advance!

1. Cable connections are always better.
But test first.. turn off the express.. reboot or even factory reset the extreme and have another go with it.
On a computer plugged in by ethernet test the speed.. wireless should be off..
So the most important thing is .. do you get full speed by ethernet.. if not you will never get it by wireless.. always less.. and sometimes much less.
2. You cannot downgrade either of those models. So you are stuck with them as is..
3. I think wireless links are always problematic.. by the very nature of the beast you will drop your speed by half.. so if the links were perfect.. and the Extreme wireless gives you 30Mbit then the best the express could ever give you is 15Mbit.. it is the nature of wireless.
4. Yes.. we can make suggestions.
But give me the pure wired network speed first. If that is low then tell me what modem you are using, which you mentioned.. normally a fibre system has no modem just a fibre converter to ethernet called ONT. Optical Network Terminal

Help, please - Combined Limits and Expressions for Insurance Plans

I seem to be configuring something incorrectly using the Combined Limits and Expression in the IMG. I was wondering if somebody has used this successfully and can give me some pointers? I've used it successfully when I've limited a plan to coverage of not more than 50% of the coverage for another plan, but I can't seem to get it to work for my current requirement. Here is my current requirement:
I have 2 life insurance plans, one basic and one supplemental. The supplemental can only be elected if the basic plan is elected, so the basic plan would be the priority plan. The individual maximum allowable coverage amount for each plan is $3,000,000, which is configured under the coverage rules. However, the combined limit between the 2 plans is also 3,000,000. A person can have the basic plan only and have the full 3 mil, or they can have both plans and must not go over the 3 mil between the 2 plans. The basic plan is 1x but the supp plan can be 1x - 8x so it is very possible that the basic will not hit the limit, but the supp will.
I tried to set the combined limit of 3,000,000 for the 2 plans using the 2 pieces of the combined limits config, but I've tried everything, and it does not cut them back.
Can anyone tell me step by step how to configure this, or do I need to enable and develop a user exit?
Thanks!
Lisa

Hi, Lisa
This should not be a problem.
Firstly, have you set the Basic plan as a corequisite for your optional plan?
Benefits--> Flexible Administration -->Prerequisites and Corequisites --> Define Corequisite Plans;
Choose your secondary plan from the drop-down; then define your primary plan as the corequisite. In most instances, selecting the 'Any plan required' radio button should to the trick.
Now for the combined limits:
This is a 2-step process.
1: Define Combined Coverage Limits.
Choose your Optional life plan, and enter the following: Limit Amount -- 3,000,000; Rel. Operator : >=
REPEAT FOR BASIC PLAN AS WELL!!!!
When you save this, your resulting screen should read something like this : OPTL Optional Life Limit 3,000,000 0.000 >=
2:Define Combined Coverage Limit Expressions
Select your Optional life plan.
Enter the following in the table:
1.00 | Basic Life Plan
1.00 | Optional Life Plan
Again, do the same for the Basic plan.
the combination of these two steps creates the following equation:
3,000,000 >= 1* Basic Life + 1* Optional Life.
Feel free to ping me if you have questions. Contact details are on my business card.
Rob
Select your Optional life plan

HT5312 forgot rescue email and security question

What can i do if i forgot my rescue email and security questions, and i dont want to call?

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Hi, I have forgotten Rescue email address and security questions answers. What I only have is my Apple ID and my password. How can I fix it?

Hi, I have forgotten Rescue email address and security questions answers. What I only have is my Apple ID and my password. How can I fix it?

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contacting Apple for support or
          Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
          Account Security.
     3. Rescue email address and how to reset Apple ID security questions.
How to Manage your Apple ID: Manage My Apple ID

Account with an icon of a face and a question mark

Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% WindowServer
      3% hidd
      2% Safari
      1% Dock
      0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
Edoardo

Smiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best.

Performance issue and functional question regarding updates on tables

A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
     where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
            DO.
              " Lock the record that needs to be update with material creation date
              CALL FUNCTION 'ENQUEUE_EMMARCS'
                EXPORTING
                  mode_marc      = 'S'
                  mandt          = sy-mandt
                  matnr          = wa_marc-matnr
                  werks          = wa_marc-werks
                EXCEPTIONS
                  foreign_lock   = 1
                  system_failure = 2
                  OTHERS         = 3.
              IF sy-subrc <> 0.
                " Wait, if the records not able to perform as lock
                CALL FUNCTION 'RZL_SLEEP'.
              ELSE.
                EXIT.
              ENDIF.
            ENDDO.
            " Update the record in the table MARC with material creation date
            UPDATE marc SET zzdate = wa_mara-zzdate
                       WHERE matnr = wa_mara-matnr AND
                             werks = wa_marc-werks.    " IN s_werks.
            IF sy-subrc EQ 0.
              " Save record in the database table MARC
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                EXPORTING
                  wait   = 'X'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'S'.
              " text-010 - 'Material creation date has updated'.
              wa_log-message = text-010.
              wa_log-zzdate = wa_mara-zzdate.
              APPEND wa_log TO tb_log.
              CLEAR: wa_return,wa_log.
            ELSE.
              " Roll back the record(un save), if there is any issue occurs
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'E'.
              " 'Material creation date does not updated'.
              wa_log-message = text-011.
              wa_log-zzdate = wa_mara-zzdate..
              APPEND wa_log TO tb_log.
              CLEAR: wa_return, wa_log.
            ENDIF.
            " Unlock the record from data base
            CALL FUNCTION 'DEQUEUE_EMMARCS'
              EXPORTING
                mode_marc = 'S'
                mandt     = sy-mandt
                matnr     = wa_marc-matnr
                werks     = wa_marc-werks.
          ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards

Can't get Airport Extreme and Express to join same network

I recently bought an Airport Extreme so I could create a wireless network with my Airport Express. THis way I could browse the internet and stream music to my stereo at the same time. After spending hours trying to get both AP Extreme and Express linked together in a WDS network, I have failed time and time again. I have no problem setting the AP Extreme as the WDS main. My iMac and laptop connect to the AP Extreme just fine. I can set up the AP Express to stream music via iTunes to my stereo without problems. But to get them working together in the same network has got me stumped.
I've set the AP Extreme as WDS main and Express as WDS remote. They are both set to same wireless channel. Where am I going wrong? Is it a 802.11n/802.11g compatibility issue?
I'd appreciate any insight. Thanks.

adrian,
I have done this a dozen time today with different base stations like yours.
The only thing I can think of is this:
1. With the WDS Main, make sure you have the address of the Remote in the box.
2. With the WDS Remote, make sure you have the address of the Main in the box.
3. Make sure both base stations have the same network name in the wireless tab.
Then restart both base stations.
Let us know what you find out.
Joseph Kriz

How can i restore my iphone 5s as i forgot my icloud password and sec questions

I bought a new iphone 5s (32G Gold)
and when I connect it to itunes asked me to restore from my old iphone 4
with all my account settings and passwords.
but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
Name : Alaa Rashed Abd el Hafiz
Country : egypt
<Personal Information Edited by Host>

First, remove your personal information from your post. That's not needed here. This is a public forum, and it is unwise to provide your personal data online.
Second, here's how you reset your password and/or security questions.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

Axiom 25 and Express Questions

Similar Messages

Maybe you are looking for