Axiom pro with logic pro

I install in control surface config mi axiom pro 49 but logic do not recognize hypercontrol!!!! help please!!!!

This is one of the more complicated things to grasp in Logic but once you understand the basics, its not too bad.
You need to learn how to use the controller assignment window. Basically you set your controller as a new Zone, then set up various different Modes in that Zone. You do this by activating Learn Mode, clicking on the parameter of the plug ins GUI and moving the pot or fader you want to use.
Check Control Surface Support, Ch. 22 of the manual.
Good luck and have patience.

Similar Messages

  • Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

    Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

    If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

  • Problem with Fader Banks and Channel in MCU PRO with Logic Pro X

    I purchased a Mackie Control Universal Pro earlier this week, and I have talked with Mackie support techs twice and they have not been able to help me. My problem is that everything seems to work well with Logic X talking with the MCU with the exeption that the Fader Banks function will not move left to channels 1-8, they are stuck at channel 9-16, and will move to the right on to 17-24 and so on,  but it doesnt move to 1-8 when the left fader bank motor is pressed.  However when you toggle tany channel 1-8 levers on the computer screen, the corresponding lever on the Mackie goes up and down,  but the reverse does not occur. The Mackie folks say this is a problem with Logic Pro X, not the MCU.  Perhaps they are correct,  because I still have Logic Express on my Mac and when I close Logic X and Open Logic Express the fader banks move perfectly from 1-8, 9-16, and so on as do the tracks.   My computer is update with Mavericks. 
    I would appreciate any help! I am not a techie, an old guy who used to record on 4 track computers, and want to get away from a mouse control,  but I'm going to take the Mackie MCU back if I cant get this straight,  I've spent a lot of time on this.  Help!

    thank you Pete in Denver,  I actually made some progress today, in setting up the control surface of the Logic Pro Control Surfaces Support Manual, around page sixteen gave me a partial answer.  I had the Mackie icon first, then the Logic Control,  and it said to drag and drop the preferred icon to the left or first place.  that solved my not being able to access channels 1-8, I was able to press the fader bank left button and - voila!.  so that saved my initial problem,  but I still have some issues in moving faders and banks in existing projects,  some tracks show up lit up in the tan colors others don't,  but that is probably due to the way i would move tracks around once I received tracks on drop box from a friend and created new tracks, and I changed a lot of the order of the tracks.  ANyway.  I did make progress.  Thanks!

  • How can i use my axiom 49 with logic pro X

    Hey..
          So I've been using logic to make music for a  while now and just recently obtained an axiom 49 controller to open my  possibilities. The only thing is, I have no idea exactly how to make it work the way I expected it to. All that comes by default is that my keybord works with all the types of preloaded instruments, but none of the faders or knobs work.. Is there something else i need to install or is it in the settings?
         Highly appreciate any help,
    Danny

    Ok, I'll ask again... have you downloaded and installed the software that enables the keyboard to become a controller for all the functions you've described?
    You have to be an active participant in getting things to work correctly.
    Have you read the M-Audio manual that tells you how to do this?
    Here, I just went to the M-Audio site.
    http://www.m-audio.com/index.php?do=support&tab=driver&serie_ID=3&PID=65526d20ff 75725a01dcf4dfab822e9d#tabs
    It looks like it's called Direct Link, I imagine it comes with directions how to install the software and get it working with the keyboard. It's for Logic 9 but I suspect it will work with Logic X

  • Is there anyone use M Audio Axiom Pro 61 with Logic Pro 9?

    Does Axiom Pro's Hyper-Control work fine with Logic Pro's Plug-in and Instrument?
    Please Share your Opinion

    {quote:title=majo> Can Axion Pro Control Soft Instrument such as Sculpture as well as Plug-in?
    Yes.
    Is there any Logic Plug-in that Axiom Pro can't Control?
    No.

  • M-Audio 61ES not playing nicely with Logic Pro X!

    The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
    I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
    I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

    Try this....
    http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
    Also make sure you have installed the latest drivers for the Air and Logic...
    Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
    Other that that.. Id contact M-Audio support for further help and advice
    http://www.m-audio.com/support

  • Which 61 key midi keyboards work with Logic Pro X (10)? M-Audio, Novation, Akai, Roland???

    Hi. I'm new to this community but would really appreciate some help.
    I'm struggling to find a 61 key midi keyboard which works properly with Logic Pro X.
    I was looking into getting either the M-Audio Axiom 61 or Novation Impulse 61 but all I can find on google etc. is people saying they don't work properly.
    Has anybody got a 61 key which works seamlessly with Pro X?
    Any help would be much appreciated.
    Thanks.

    To "The Art Of Sound"
    Hi. I doing next.
    1. I create new project
    2. I select Yamaha Grand Piano
    3. I play something in "live" mode. All is ok
    4. I play something in "Rec" mode. All is ok
    5. I record second track with the same instrument, with Yamaha Grand Piano. All is ok
    6. I record third track with Yamaha Grand Piano. All is ok again.
    7. Now I muting first or second track and... third track plays wrong notes! I unmute first track, but third track still to play wrong notes! Why???
    Ok. I continue experiment with created project. I have three Yamaha grand Piano tracks and I creating new software instrument and assing Hovering Machine to it. I try to play in "live" mode something. And I get interesting effect. If I play short notes (sixteens, for example), I can play for one minute without problem. And Logic Pro X starts to play wrong notes after this time delay.
    If I start to press chord notes without breaking, Logic  Pro X plays for 15-30 secounds normally and starts to play wrong notes them.
    Well. I turn off all plugins and effects from instruments. But Logic Pro X countinues to play wrong notes!
    I experimented with NI Kontakt 5. Kontakt plays wrong notes!
    I experimented with LUSH-101 plugin and minimoog. This two instruments play correct notes always!!! WHY????
    Why some instruments play wrong notes and other instruments play correct notes in the same project?
    I wrote wrong in my previous post. I got this problem with Logic Pro X 10.0.3 update.
    Actually I have serious problem now. I opened projects created in Logic Pro X early and I have this problem  in ALL projects. This's commercial projects and my partners asked me already about release date... What must I answer?

  • Performance issues with Logic Pro 9

    Hi,
    I'm experiencing quite big performance issues with Logic Pro 9:
    bad midi timing and sync, user interface is kinda slowing and less reactive, ...
    Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
    Should I upgrade to 10.6.2?
    Thanx

    Hi,
    I'm using the same machine ...
    I never get any performance issues
    I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
    so more details about your setup are required to answare!
    4GB ram???
    I suggest to check your ram!!!
    Ram must be compatible with Xeon Nehalem Try specification!
    if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
    G

  • Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

    Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
    The wha wha pedal work well with GarageBand but not working with Logic Pro
    Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
    HOPE YOU UNDERSTAND MY ENGLISH

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Help setting up my audio interface with logic pro x

    Hi everyone,
    I am a newbie with regards to home recording and using Logic Pro X and I need some help and advice about setting up my home recording set up for the first time. I want to connect my synthesizer Korg Triton Extreme to my Audio Interface Steinberg UR22 to my Apple Imac computer.
    What I would like is if I can create backing tracks or use pre-set sounds or drum patterns from my Korg Triton Extreme synthesizer and then transfer them onto Logic Pro X to help me compose songs.
    How should I go about doing this? And what settings should be applied to Logic Pro X so that I can hear the songs as they are being played and recorded?
    So far I have connected my synthesizer's two outputs to the two inputs on my Steinberg UR22 Audio Interface. I have also connected the USB point on the audio interface to my Apple Imac computer. But when I have tried to add a drum track from the Korg Triton Extreme synthesizer I cannot seem to add any of the drum sounds. Nothing appears to be recorded despite me trying several times. I cannot hear any sound coming from the audio interface either despite having a pair of headphones plugged into it.
    I would also like to find a way to synchronise the drum tracks I want to record from my Korg Triton Extreme synthesizer to Logic Pro X. So that when I click on the record button on Logic Pro X the synthesizer track automatically starts playing and recording on Logic Pro X. Whats the best way to do this? And will I need a Midi cable for any of the things I want to do?
    Many thanks,
    James.

    Hi James
    I just got myself a macbook pro and logic pro X, and I also have a Triton Extreme and the UR22. So I know what the learning curve can be like - it's been a long time since I've used a sequencer in a computer.
    I assume you are aware of the difference between audio and midi? With your current setup, all you can do is play your Triton and record the sounds as audio loops - you should be able to hear the Triton through headphones plugged into the UR22, and (assuming you have installed the UR22 driver) you can also hear the Triton through your computer speakers (or headphone output) once you tell Logic there is sound coming in from the UR22.
    If you want to be able to play the sounds in logic pro, or transfer drum patterns (which are in midi format), you will definitely need midi cables (you may be able to use midi by connecting the Triton's USB out to your computer, but having not tried that, I don't know if it will work - it does on more recent synths)
    paul

  • Questions about Novation Remote 25SL integration with Logic Pro 8

    Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
    I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
    - Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
    - Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
    - I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
    Thanks in advance for all your feedback.
    Message was edited by: Jason Lixfeld

    Follow-up research:
    Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
    1. disconnect the alphatrack.
    2. launch Logic and then turn on the ReMOTE SL.
    3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
    So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
    As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
    I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

  • Can I connect every USB-Audiointerface with Logic Pro?

    Hello there,
    please forgive me, if my english isn't so well.
    So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
    But - Can I simply connect a USB-Audiointerface with Logic Pro?
    So, hope you understand me,
    Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

    All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

  • Can I use digi 003 console with logic pro 10 ???

    I have the new mac pro with new os mavrik and
    I have the digi 003 console work with pro tools 10 perfect
    I want to work with logic pro 10 and I don't know if it work with my digi 003 console
    Please help me

    Hi again Bill,
    Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

  • Thunderbolt audio interface with Logic Pro?

    Are we to get a new thunderbolt interface with Logic Pro? Avid released their stuff today!

    re: Thunderbolt
    bill borez wrote:
    They'll be a whole load of them in the not too distant future.
    hehehehe
    http://www.youtube.com/watch?v=kTTSsB92L_s
    at about :48   

Maybe you are looking for