Axis Field filter only appearing in Legend of Pivot Chart

I was referred here after posting the following on the Office Excel user forum (answers.microsoft.com) I hope I provide all you need, but of course I can provide further details if needed. I am on Windows 7 using Excel 2010.
Okay here goes! (thanks in advance for any direction you can provide)
I was creating a PivotChart where I wanted to be able to filter the chart based on the fields I dropped into the "Axis Fields (Categories)" areas section of my PivotTable. This was working fine until I added the filters as slicers, decided
I didn't like them, and deleted them. Now when I try to view the filter boxes, they will only appear as part of the legend. I do not want to show the legend as it has too many values. I would like to revert to the original behavior of showing the Axis Field
Buttons at the bottom of the chart, where they appeared originally (Without being associated with the chart legend).
Anyone know how to restore this behavior?
It works this way on other chart types, like line and bar. But it no longer works on the type of chart I wanted to use which is a Pie chart. I have opened new instances of Excel and tried to create a Pivot Chart Pie chart and get the same results:
the axis fields are associated with the chart legend, instead of being available independently.
Any help that can be provided would be appreciated
Thanks!!

I guess you may want to let the Pivot chart shows like the screenshot below:
If so, you need to add a new column(Equal to the field which you want to put into the AXIS field) to source data, then in the Pivot Table, put this field to the FILTERS .
This was working fine until I added the filters as slicers, decided I didn't like them, and deleted them
I don't think this operation you did would change any behavior. Perhaps you can upload this file to a file sharing site and then share the link with us.
Wind Zhang
TechNet Community Support

Similar Messages

11.1.1.5 - Measure labels are appearing in legend (line graph)

I've created a line graph in 11.1.1.5. My legend is showing a combination of the column value and the measure name (e.g. Web Sales, Direct Sales, Retail Sales). I want my legend to simply say Web, Direct, and Retail, without the appended 'Sales' measure label.
The Measure Labels tile is currently residing in the Vary Color By (Horizontal Axis) zone, along with the legend column, so I guess it makes sense that the legend column and the measure labels would both show up in the legend (although I don't think that was the case in 11.1.1.3). However, there doesn't appear to be any place into which I can relocate the Measure Labels tile so that the word Sales DOESN'T appear on the line graph. If I move the Measures Labels tile into Graph Prompts, Sections, or Group By (Horizontal Axis), the word Sales appears in those locations. If I attempt to move that tile into the Lines (Vertical Axis) box, or into the Excluded box, it won't allow being dropped there.
Switching between line, bar, and area graphs reveals the same problem in all graph types.
Is there any way to supress the display of measure labels on graphs in 11.1.1.5?

Hi Paul,
This is the feature in 11g obiee displaying the Measue heading and dimension value... like u said right Web Sales...and so on.
Here in u case web is the value of dimension and Sales is heading of a measure.
One way is if u are not using any dimension apart from 1 dim and fact u can put measure labels in the group by axis and dimension column in the show in legend section then it will give u only web.
But if u have 2 dimension then we have to put this measure labels with either one of the dimensions in this case heading of the measure wil display.
Thanks
Subhash

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

I created a Custom list New Form and need to make the text fields read only

When I use SharePoint Designer and add the read only attribute to the SharePoint form field, then it throws a web part error.
but here is the thing, I have current user Filters populating the Form Fields. So the form fields populate First name , last name etc. and I need these fields read-only....
the Client doesn t want the end user to Change those fields. Is there any way to "LOCK" the form fields?
As I have only 7 text fields that need to be locked down. and one field is a signature line that is a true input field.. where the user has to inter their initials.
Any ideas? as I have tried most of the items available thru searches nothing works, or it throws that web part error message.
Steve Athey

Daniel: ( I'm now at work, a different ID is logged on for me)
I used SharePoint Designer.
Steps:
created a web part page
then on the SharePoint Designer ribbon I then went to insert:
new item form
Then I selected my data source (list)
then I placed the 8 columns on the page
a page viewer web part to pull the manual that people have to read.
and 7 current user filter webparts. (1 for each form field) Yes it is over kill, but I'm trying to keep this straight out of box as much as possible...
then for the form fields
I added a parameter and the read only tag see below in bold:
<asp:TextBox runat="server" text="{$ParamEmployID}" id="ff17{$Pos}" __designer:bind="{ddwrt:DataBind('i',concat('ff17',$Pos),'Text','TextChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Employee_x0020_ID')}"
ReadOnly="True" />
I also added the parameters in the ribbon area
the error message doesn't tell me much, it just send me to web part maintenance page...
if I removed the ReadOnly = True then the error goes away..... So I was trying to find a quick simple JQuery and or javascript code item that would make the 7 text fields readonly and leave the
8th text field alone to allow people to place their initials on the page to say that they read the manual.
I have created hundreds of these types of pages .. this is the first time I have run into this issue, but it also the first time I have tried to use the ReadOnly = True item.
Any Ideas and or thought on how to make the items read only? and not throw the error.
Steve

SQL Subscription field shows * only with Dynamic Text Label in SQL query

We are using Hyperion Analyzer 7.2.x for showing budget and actual data. I have to show this financial data based on the security e.g. person in IT can see only IT dept. data. Hence I want to use dynamic text label <<userid>> for the security based on the person logging in to Analyzer.
But when I use dynamic text label <<userid>> in the SQL query in SQL Spreadsheet, SQL Subscription field shows * only selection option. Does anyone have idea how to solve this problem?
Thanks in advance for your help.
-SV

Hi
Okay i know this is a bit crazy way.....but i think this is the solution for your issue.
Create a report without the where clause (<<useris>>) then add a filter (sql subscription) then you can find all the values that are there in the SQL field (try to increase the query limit it is set to 250 as default) then edit the spreadsheet and add the where clause (<<userid>>).
This will help you having the filter and the dynamic text label. I think there is an issue when you try to filter it with a where clause.
Hope it helps.
CK

I have difficulty pasting text into the file name field(prefix only) while saving files.

OS: WinXP sp3
FF: 3.6.3
I have difficulty pasting text into the file name field (prefix only) while saving files. example: File name is Pic123.jpg and I want to rename it ABC123.jpg and I have ABC loaded into the WinXPsp3 clipboard. When I highlight\right-click\delete "Pic" then attempt to paste the ABC, I get either no reaction, or upon multiple paste attempts, the ABC is appended to the end of the file, after the extension, as "Pic123.jpgABC". If I delete this unwanted suffix, or repeat the process several times, eventually I can delete the unwanted portion of the prefix and paste the desired text. Sometimes it works fine first try, but mostly it takes several tries. I'm using Firefox 3.6.3 but the problem existed in whatever previous version I had too. This issue only occurs when using the delete/paste; I can always manually change the name by typing. Thank you for your help.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is that the server sends a wrong response header.
The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
* https://developer.mozilla.org/en/Firefox_8_for_developers#Network

Filter only records which has particular column initial

Hi friends
I am using filter for a table view, in my talbe for a particular column , it has initial values also for some records,
my question is how the user can filter only the records that has the particular column value is initial.
what has to write in the filter field

i am not sure how you can handle it with FILTER = SERVER
but if you set it to APPLICATION, then you can write your own logic . for filtering. in this case in the filter field you may request the user to enter "INITIAL" to search for initial values. This text "INITIAL" you can capture in your oninputprocessing and filter the table.
other option (not exactly FILTER) is to set sort = SERVER and user can do ascending sort to see the initial value records first.
Regards
Raja

Have an iphone 3GS, 2 email accounts. My work email account used to work. Now if I send any emails from this account it only appears in my sent box. Recipients internal and external do not receive. IT person cannot figure why occurring. Any insight?

Have a iphone 3GS; 2 email accounts. one is for work. It used to work fine until about Feb 2011. Now when i send emails from my work account it only appears in the sent file. Recipients do not get email.
IT person looked at it & cannot find why this is happening.
Any insight why this is occurring??

This has nothing to do with your iPhone.
If a message is in the account's Sent mailbox, this means the message was successfully sent. If a message cannot be sent for whatever reason, it will remain in the Outbox.
What happens to a message after it was successfully sent has nothing to do with the email client or computer/device used to send the message.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Display Image on report through Field Definitions Only File.

Hi all,
I have a report where I work with Field Definitions Only files (ttx).
These files are mapped to classes in code behind (csharp).
In code behind I make lists of these classes. Each list is set as the datasource of a subreport.
This works great!
My new goal:
Now I tried adding a picture to my report.
In the TTX file I added a BLOB field.
In the code-behind class I added a System.Drawing.Image.
My actual problem:
The class gets filled with the image, but the image is NOT displayed on the report
Does anyone know why this is happening?
How can I fix this? (should I use another Type in my class for the picture?) (should I format the picture in the report? ....)
Kind regards,
Wim

Hi AG,
Thanks for your response.
This is my TTX field:
Signature BLOB
I can't see the image in the report because I create the image in code-behind.
I think the problem doesn't occur in CrystalReports but in the conversion from my StrokeCollection (I use an InkCanvas [WPF] to capture a signature) to a ByteArray.
I am already one step closer to the solution. You can't just assign an object of type Image to the BLOB field of the report but it has to be a Byte-Array.
The problem I am facing now is that the picture is black after a conversion. (I see this when I export to disk and open the file in MSPaint).
The good thing is that CR shows me a black image so I guess CR is doing its job!
Kind regards,
Wim

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

How do I delete my old Apple ID that only appears when I try to update my apps...my new I'd works fine with everything else

How do i delete an delete delete an old Apple ID that only appears when I try to update my apps..a

All of the purchase you made on the old AppleID are permanently connected to that AppleID. The only way you can get rid of it is to repurchase everything again with the new AppleID.

The incorrect iCloud email (in the from field)address is appearing

The incorrect iCloud email (in the from field) address is appearing on my iPod touch, but not on my MacBook Pro. The I Pod's ICloud email account is using my account for Itunes etc., not the icloud email address, how can I reset the "from" address?

ok thanks, so if I do nothing straight away, they won't free the address up and give it to someone else, correct?

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

Axis Field filter only appearing in Legend of Pivot Chart

Similar Messages

Maybe you are looking for