AZERTY support for external keyboards

Is there a way for the Palybook to support keyboard other than US version for bluetoth keyboard.
Mine is french azerty (Microsoft 6000) but It is mapped as an US (qwerty) when typing.

Still works over command-line though, I found out.
Here's instructions on how-to create disk images in terminal with dd :
http://lowendmac.com/brierley/08pb/classic-mac-boot-floppy.html
Thanks for your help! The hint they dropped HFS support was crucial!
Peter

Similar Messages

Does OS 9 have built in support for external Iomega Zip drives?

Hi,
Does OS 9.x have built-in support for external SCSI Iomega Zip drives?

Yeah, you are correct, but Iomega's drivers & APPs were one really destabilizing factor for OS9, as well as ruining a few ZIP Disks with that Death Head crash, and being a nuisance. Intech's drivers gave twice the R&W speed, never failed, never crashed, could Format & Partition them... also worked for MOs, JAZZ, SyJets, other Syquests from 44MB to 550MB, and any other drive regardless of IDE, SCSI, FW, USB.

Trying to setup actkbd for external keyboard

Hi, actkbd works fine for my laptop's keyboard. However I am trying to setup actkbd for the media keys in my external keyboard also.
So, i tried running
sudo actkbd -s -n -d /dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd
in the terminal, however it does not show any codes for my external keyboard's media keys. when i checked in "showkey and showkey -s" it shows that the external keyboard's media keys have the same scancodes and keycodes as the internal keyboard.
How do i make my external keyboard's keys work with actkbd?

Yes, NAT and DNS are turned on, but I wonder if my DNS settings are right. Do you know what they should be?

Unable to set Canadian French CSA layout for external keyboard when language set to English

I use both French and English on my iPad. I now have an external keyboard, with French Canadian CSA layout. However, the Canadian French CSA layout for the hardware (external) keyboard is not available when using English as an input language. Many other layouts are available (e.g., US, Spanish ISO, etc.), but not this one. French Canadian CSA layout is available with French as the input language.
How can I add Canadian French CSA hardware keyboard layout when using English as the input language?

It's not possible for users to add keyboard layouts to any iOS device. All you can do is ask Apple to add it in a future update:
http://www.apple.com/feedback/ipad.html

Ukrainian language support for virtual keyboard

I'm very interested to be able to write in Ukrainian language on BlackBerry 10. However, the Ukrainian layout is missing. Thus, I created a new feature request which you can find here: https://www.blackberry.com/jira/browse/BBTEN-858.
If anybody else is also interested, please, follow the link and vote for it.
With best regards,
Oleksii Serdiuk

hobnob wrote:
leppa wrote:
Since reporting it on 14th of February it was assigned to someone on 21st of Ferbruary. No further updates or comments since then.
Any news on this at all? Any word from BlackBerry or elsewhere that Ukrainian will be included as a keyboard input option in future OS updates?
No news from my side but there's an article on ITC.ua which states that Ukrainian mobile operator MTS announced Ukrainian language support for BlackBerry 7 and 10 to be delivered by this summer. Not sure, however, whether it will be included in all ROMs or in some custom MTS one. Here's this article: http://itc.ua/news/smartfonyi-blackberry-poluchat-podderzhku-ukrainskogo-yazyika/
With best regards,
Oleksii Serdiuk

How to set shortcuts for external keyboard for MacBook Pro?

I attached a wired external keyboard (Apple aluminum) to my MacBook Pro. Several of the function keys are preprogrammed, and several are open. I want to program one of the open function keys to emulate the F11 key on the internal keyboard, the one that moves all open windows out of the way to show the desktop. The keyboard shortcuts tab in System Preferences only controls the internal keyboard.
Does anyone know a way to do this?

Bump. Searching for a solution to the same problem.

Support for croatian keyboard

I would like to know if team for Adobe Story will include support for a croatian type of keyboard or at least, include support for croatian letters ? Thanks in advance

You'll have to wait for some time. We'll try to get to it soon. Till that time I would really encourage you to continue working in Story in other languages that are available. Thanks for your patience. Also let us know if you have some feature requests on your mind.
-- Adobe Story team

Logic Pro X offers support for old keyboards?

from Apple's website: "Control Surface Support: Korg: Kontrol49, microKontrol" Is this really the only keyboard controllers that the new Logic Pro X is supporting? I can only find these on ebay. Any recommendations for a keyboard controller?

Remember, 'Support' doesn't actually mean that this is a complete list of controllers that will work. It's simply a selection of presets containing pre-assigned MIDI controls, a bit like you telling an electronic drumkit to play C3 when you hit the kick etc.
Most controllers have a 'Mackie Control mode' that change the assignements in the controller to ones identical to the Mackie control and thus work with the Mackie Control preset. Nealy all the rest have presets online that can be added to the list and used.

Keyboard settings for external keyboard get lost between sessions

Hello!
I use MacBook Pro laptop which I connect to external mac keyboard when come to work. I prefer to use "F1, F2... etc" keys as functional keys so I turn on this setting in bootcamp control panel. However, each time I disconnect the keyboard and connect it back this setting stops to affect that keyboard while setting is still set to true in control panel.
Is this problem going to be solved?
Thank you!

Any of the regular helpers here will tell you that CCleaner deletes settings files resulting in the sort of upsets you have described. I don't know why you didn't have such trouble under previous versions of windows, but since I choose not to use windows 8 I'm not able to comment on how or if the behaviour has changed.
There have been changes in Thunderbird itself, allegedly, which I haven't seen applied to any of my own three installations of Thunderbird, that might mean that there are new files that need to be specifically excluded from CCleaner's actions. Maybe these changes are specifically related to Windows 8 installations. If you have a ''xulstore.json'' in the profile on the affected machine(s) then try adding ''xulstore.json'' to CCleaner's exclusions.
"…will essentially keep CCleaner from managing anything relating to Tbird... and that's sort of contradictory…" Why?? What do you do in Thunderbird that you consider ''needs'' to be cleaned up by CCleaner? CCleaner picks on files whose names coincide with similar files used by browsers to record browsing history. Thunderbird uses, for instance, json files to store configuration settings. If you allow CCeaner to delete these from Thunderbird's profile then Thunderbird will necessarily forget things.
We always advise to exclude all of Thunderbird's profile from CCleaner. If you won't take that advice then you're rather on your own.

Feature Request: Support for External Synths/Modules (via MIDI)

Hi,
I just posted a feature request (via the Apple Feature Request form) but also wanted to post here. I use a combination of hardware instruments (sound modules) and software instruments.
*My Setup*
- Keyboard #1: M-Audio Axiom 25 (also includes a USB MIDI interface)
- Keyboard #2: Roland A-33 Controller Keyboard (via my Axiom-25's MIDI In)
- Edirol USB MIDI Interface (sound modules plugged into MIDI Outs)
- Sound Module #1: Roland JV-1080
- Sound Module #2: Yamaha TX802
MainStage currently takes care of all my software instrument needs, however, what is missing is the ability to add external physical MIDI devices as either patches or as channel strips. I would like to use a combination of software and hardware instruments in the same song, and control this via Mainstage.
Example:
- Patch 1 could potentially contain 2 software instruments, each seperately controlled by a physical keyboard (this is currently possible)
- Patch 2 could contain 1 software instrument and 1 external sound module each controlled by a physical keyboard (this is currently impossible)
- Patch 3 could contain 2 external sound modules, mapped to different ports and/or channels, and therefore independantly controlled by my 2 keyboads (this is also currently impossible)
Would I be correct in assuming that this is a fairly common limitation of MainStage?
Message was edited by: olafwagner

I have achieved MIDI out from Mainstage, thank to the information found on this forum..
what I actually do is send Prg Change from every preset I select to control a hardware vocal harmony pedal. this way i don't have to remember which setting i use on every song or even, section of a song.
*Step 1:*
Library>application support>Logic> create a folder named precisely MAINSTAGE CALLBACKS
inside of it, create an applescript with this code
on action(parameter)
set myprogramchange to programchangenumber of parameter
tell application "MidiPipe"
MIDISend toPort "MidiPipe AppleScript Input" withData {192, myprogramchange}
end tell
end action
*step 2*
download MIDIPIPE from http://homepage.mac.com/nicowald/SubtleSoft/
and install it in your apps folder
*step 3*
start midipipe, and define the following modules
MIDI IN-> use applescript input from menu
MIDI OUT-> route to your midi interface desired output
save this to a Midipipe file you can easily access
Now, when I go to a gig I FIRST (this is important) load midipipe and my preset, and just hide it and let it work in the background
Start mainstage, and set the program change of every PATCH to what I want to be sent over MIDI OUT when I enter the preset (-1 if needed or modify the previous applescript).
Ok, this just gives you Prg change... if you want something like CC or others, you can look at some of the example files on midipipe, and write your own applescripts to be used from a control within mainstage (you know, select a screen control, and assign it to an applescript located in library>application suport>logic>Mainstage scripts. you have to tell the applescript to receive incoming data from mainstage and send it (with even some filtering or transforming) to midipipe to go to the outside world.
One last idea: i used a free plug-in called MIDIIO that, although the plugin analysis on mainstage might say does not pass, you can use it anyway, and lets you insert it as if it was a plugin instrument...then you just route your screen controller to a MIDI parameter on that track, and there you go...but in the past it was not as solid as the midipipe solution.
I am still investigating...I am pursuing having my hardware controller knobs to follow screen settings everytime I just change a patch, but lack some info on how to get parameter values when entering the patch ¿anyone knows, blueberry, zuelito...? I promise to share the results!
best

Support for ABNT2 keyboard layout

Is there any plan for supporting ABNT2 keyboard layout (Brazilian layout)?
It is a great leap introducing international keyboard, but customizing keyboard layouts or including additional layouts would be a nice feature.
Some languages require the use of dead keys, cediles, cincunflexes, etc, etc.
There are some options developed by third parties: like Ukelele or Brasileiro programs.
My major concern is just about not using an official program when just adding info to my computer. One of my decisions when buying a Mac was about security concerns.
I would like to hear comments about risk concerns and tests about these 2 programs (Ukelele and Brasileiro) as well.
Thank you very much,
Marcio

Is there any plan for supporting ABNT2 keyboard layout (Brazilian layout)?
Nobody here can tell you anything about Apple's plans, we are just users like yourself. To tell Apple what you want, use this link:
http://www.apple.com/feedback/macosx.html
There are some options developed by third parties: like Ukelele or Brasileiro programs.
My major concern is just about not using an official program when just adding info to my computer.
I would like to hear comments about risk concerns and tests about these 2 programs (Ukelele and Brasileiro) as well.
There is absolutely no need to be concerned about Ukelele and keyboards made by it. Countless people have been using them now for many years without any problem. I myself have made an ABNT keyboard available to people for a long time now:
http://m10lmac.blogspot.com/2007/02/fixing-brazilian-keyboard-layout.html
You should just go ahead and use this one or any other you can find.

Why no boot support for external USB HDs?

I found this after laying out cash on a Lacie 160gb Porsche drive - i Carbon Copy Cloned my startup disk onto the external, go to start-up disk in Sys Preferences, and choose the shiny new drive. It doesn't boot.
So I search and find this:
http://docs.info.apple.com/article.html?artnum=106474
My questions:
1. Why is USB booting not supported by OSX?
2. Is there any workaround?
thanks in advance,
Mike Power

thanks foir the replies, everyone. Even though firewire is faster, i thought at least apple would keep abreast of latest technology and create USB drivers that can handle prevalent technology.
I don't intend running my mac from the external HD permanently, only in emergencies when I have a hard drive failure on the laptop, so I couldd clone the OS across using drive genius or Carbon Copy and save hours of installation, and downloading updates to software.
Does anybody know anything about using the "burn image from" and "restore" commands on Disk Utility? Is there a disk image size limit? <derails own thread into tangent>
that way, I could simply burn an image of my laptop to the USB drive, and if all else failed restore it from the OSX install disk using Disk Utility.
All this because Apple have failed to supply working drivers... feels more like windows every day!
thankss to anyone who can answer this or earlier questions.
Mike Power

Accented Characters Support for External Text Files

Hi there! I created a site which imports external text from a
TXT file. The text is in Spanish, so I need accented vowels and
Ñs. I've tried using simple text and HTML text... but when I
run my movie, it doesn't show these international characters.
Instead, I get some weird symbols or question marks... What should
I do? Thanks in advance!

Hi,
Try this link it may have what your looking for it worked for
me!
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14143
Danielle

Improve Support for External Hard Drives

I have tens of thousands of images, so many that they won't fit on a single hard drive size that comes in laptops, and yet I like to have all of the thumbnail images in a single database along with the keywords so I can search. Just today, a client emailed wanting me to check on some photos from last fall, and I'm out of the office right now.
Yes, Lightroom will come up even though the external hard drive is missing, *BUT* its checking each of the images that aren't there, and since there's tens of thousands of them, its taking forever.
I will leave it up to the designers to craft a solution, but offhand I'd say the best solution is to make the program smart enough to notice when images are stored on an external hard drive, and not freak out when that hard drive isn't there.

It is not freaking out. It is just checking, but as you say there are 'thousands'. What I think they will be doing is moving it to more of a background process like they do preview building, so it won't be as much in the way. I think this is what can be hoped for.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/

Preview support for wireless keyboards

Hi . . . .
A simple question.
Is there a keyboard command to preview video and/or audio if you have one of the Apple wireless keyboards (that do not have a numeric keypad) ?
Or am I destined for a life time of sub menu slavery if I need to preview audio (which is 99% of what I do !).
Cheers for any help.
Lee

Help !
Ok, I went to the Sebastien Perier website . . . and found the keyboard shortcuts text file, it was straightforward enough to change 'Audio Preview' to the period button on my wireless keyboard (below: italicised and in bold) - after first making sure nothing else was using the period button.
I then tried the same with 'Preview' (below: italicised and in bold) - but regardless of what I assign the command to (currently in this example F5) it won't work ? I am also making sure what I try is not in use by anything else, and all the obvious stuff like relaunching AE after each edit of the text file . . . . but nothing will seem to work, whatever key (or combination of keys) I try AE does nothing when I relaunch AE and press the key/s ?
Anyone got any clues ?
Here's the section I am editing.
["CEggApp"]
"BrowseInBridge" = "(Cmd+Option+Shift+O)"
"New" = "(Cmd+N)"
"OpenComp" = "(Backslash)(Yen)"
"OpenMRUContext" = "(Shift+Esc)"
"Preview" = "(F5)"
"PreviewAlt" = "(Shift+Pad0)(Shift+PadInsert)"
"PreviewAudio" = "(.)"
"PreviewAudioWorkArea" = "(Option+PadDecimal)(Option+PadComma)(Option+PadDelete)"
"PreviewBlitTest" = "(Cmd+Option+Shift+Pad0)(Cmd+Option+Shift+PadInsert)"
"PreviewWire" = "(Option+Shift+Pad0)(Option+Shift+PadInsert)"
"PreviewWireClear" = "(Option+Pad0)(Option+PadInsert)"
"PreviewWireTrails" = "(Option+Shift+macControl+Pad0)(Option+Shift+macControl+PadInsert)"
"PreviewWireTrailsClear" = "(Option+macControl+Pad0)(Option+macControl+PadInsert)"
"ToggleVOutEnabled" = "(Cmd+PadSlash)"
"WriteKeybindingsFile" = "(Option+K)"
"WriteStringFile" = "(Cmd+Option+Shift+macControl+S)"
"WriteVersionFile" = "(Cmd+Shift+HELP)"
"WriteVersionFileExtra" = "(Cmd+Option+Shift+HELP)"
Cheers in advance !
Lee.

AZERTY support for external keyboards

Similar Messages

Maybe you are looking for