Azure backup services and Virtual machines
If I use the Azure backup service with the Storage server 2012 r2 and backup my virtual machines, can I then use that backup and use the virtual machine service to host them if I have a disaster to my server equipment and use it until my new hardware comes
in? If so is this a hard thing to do and what would be the best practice to follow to implement this?
Hi Aaron,
The Azure Site Recovery is suitable for your situation.
Azure Site Recovery helps you to protect important applications by coordinating the replication and recovery of physical or virtual machines. You can replicate to your own datacenter, to a hosting service provider, or even to Azure to avoid the expense and
complexity of building and managing your own secondary location.
For detailed information, please refer to the link below:
http://azure.microsoft.com/en-us/services/site-recovery/
To deploy the Azure Site Recovery, please click the link below:
https://msdn.microsoft.com/en-us/library/azure/dn440569.aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
Help! Azure Cloud Services and Virtual Machine Web Servers Load Balancing
I have a cloud service. I have two virtual machines setup as web servers each with IIS installed. I have configured my domain registrar to point my domain name to the cloud service IP address. I also went into the endpoints of each virtual machine and verified
that I have http port 80 setup on both in a load balanced set.
I am unable to access websites on either server at this point. DNS propogation site shows "error: token mismatch"...this has been setup since yesterday and still error.
Can anyone assist me in where I went wrong? Am I confused to how the cloud service should work? I am assuming it will allow me to load balance the two virtual machines in the way I have configured above. Please help!!!!Hi,
Thank you for posting in here.
We are checking on this issue and will get back at earliest.
Regards,
Manu Rekhar -
How to enable diagnostics in cloud services and virtual machine
Hi All,
I need to enable diagnostics for cloud services and virtual machine in our
cloud environment. I referred the below link.
https://convective.wordpress.com/2014/06/27/using-azure-monitoring-services-api-with-azure-cloud-services/
Installed azure SDK 2.5 and cloud services instance is not displayed for cloud services in Visual studio 2013. Please provide the steps to enable at run time.
1) How to enable this diagnostics at run time.
2) How to enable event logs for cloud and Virtual machine
3) How to get the event log data's from REST API.
Please help to resolve this.
Thanks.
Regards,
Rathidevihi Rathidevi,
In addition, you could enable diagnostics feature on VM from this blog:
http://azure.microsoft.com/blog/2014/09/02/windows-azure-virtual-machine-monitoring-with-wad-extension/
Please refer to it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Trying to deploy a Service using Orchestrator and Virtual Machine Manager
Hello,
I'm trying to create a runbook to deploy a Service in a cloud using Orchstrator and Virtual Machine Manager, 2012 R2 both of them.
I'm following these 2 links, but not luck.
http://daniyar-tech.blogspot.com.es/2013/07/system-center-2012-sp1-orchestrator.html
http://www.systemcentercentral.com/orchestrator-by-example-deploying-a-service-from-template-with-vmm-and-orchestrator-2/
I'm receiving this error in "Configure Service Deployment" step:
The following errors occurred when invoking PowerShell script:Could not find service template
I configured the Cloud Name and it does not work for me...
Thanks!Thanks, Marc! This solution worked for me, after many other attempts failed.
Senior Tech Writer, SharePoint Performance and Capacity Management -
Time machine Backup of bootcamp, Virtual Machine, and VM based on Bootcamp
I have read posts that contradict each other, so...
Does Time Machine backup Bootcamp? I think the answer is no.
Does time machine backup a Parallels Virtual Machine (bootcamp or other) as expected? I believe the answer is no, any changes to the VM will cause the entire VM to be backed up. So, I think you should do an occasional back up in time machine that includes all VMs, then set in VMs to not be backed up by time machine...right?
Are there any considerations of a Parallels VM for boot camp? For example, does it mater if you do windows update from the VM or the bootcamp? I think the answer is no, you can do anything from either and get the same results.
thanks
bobnever got a answer
-
I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish -
Azure backup services for Object Storage
I'm investigating using your Object Storage services for our on-premise application. I see there are replication options for this service but I assume all the replicas are near real-time. I want to be protected from something horrible like an application
defect corrupting or deleting our BLOBs. The Azure backup service seems to be for backing up on-premise data to the cloud. The Object Storage BLOBs I want to back up will already be in the cloud. Even if I can use Azure
Backup for this, I'd like not to manage it myself. Is there a backup service I can use with the Object Storage service that allows me to have backups but not have to deal with managing/monitoring them? If so, where can I get pricing information?Azure backup supports files and folders backup to Azure. if there are Windows VMs or machines using Object Storage services, then install Azure backup agent in the Windows machines to backup the relevant files and folders.
-
NAS Storage on Azure Backup Services
Hi are looking to use the new Azure Backup Services to backup our on premise data. Unfortunately, we use NAS boxes for a large amount of data and mount them as drives and these are not showing as valid backup sources on the agent software.
Can we use the Azure Backup Services to backup the NAS data or will we have to resort to using a third oarty coupled with a BLOB storage account?
Regards
MattHello Matt,
Thanks for posting here!
I think NAS storage backup is not supported by Azure Backup.
For more information check this link:
https://technet.microsoft.com/en-us/library/jj573031.aspx?f=255&MSPPError=-2147217396#BKMK_faq_10
You can use third party software to back it up as a storage blob.
Reference link:
http://www.cloudberrylab.com/blog/cloudberry-backup-for-windows-azure-blob-storage-overview/
Hope this answers your question.
Regards,
Sadiqh -
Cloud and virtual machine API - Which one is best way
Hi
We are having cloud services in our environment. In that we have web role and vm role. We want to collec the cloud, virtual machine and web role related information both config details and performance related information.
1) For this we are using Service management REST API and
API indicated in the below link
http://azure.microsoft.com/en-in/develop/java/
https://msdn.microsoft.com/library/azure/ee460799
http://dl.windowsazure.com/javadoc/
1) I want to collect the cloud, virtual machine and web role configuration
details and performance details (like screen shot 1 and 2)
2) I want to collect the Diagnostic information enabled by virtual machine and cloud services like
WADPerformanceCounterTable etc
Which one is the best way (from the above link) to collect all these informations. Please suggest me..
Thanks & Regards,
RathideviHi ,
We want the same for java. So we referred the link below and attached screenshots.
http://azure.microsoft.com/en-in/develop/java/
In the below screenshot gives (Service Management/API/REST and Table Services/API/REST).
In that which one is best API or REST.
We want the configuration, Performance and dignostic details of cloud , virtual machine and web role related information. -
Connect Cloud Service with Virtual Machine
Hi,
Recently migrated my Website to one of Virtual Machine ( Windows 2008 R2 ). Migrated all my MySQl, tomccat, memcache and code.. Now if I hit localhost on Virtual Machine I can see website up and running.
But When tried to connect it from outside failed to do so.
Can someone help me to setup cloud service pointing to this virtual machine. Already setup access points etc pointing to this VMHave you created an endpoint for HTTP? Sounds like that is what is missing...
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-set-up-endpoints/ -
New SQL reporting services on virtual machine pricing
I still cant figure out how much it will cost me if I have a medium virtual machine with sql server standard for sql server reporting services. Aprox cost? Is this 100$ or 500$ ??
Hi,
About SQL Server VM pricing, I suggest you have a look at below document, hope this helps.
#http://azure.microsoft.com/en-us/pricing/details/virtual-machines/#sql-server
Best Regards
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Need help with LVM and Virtual Machine Manager
Hello,i want to know if there is any way to install LVM (Logical Volume Management) manually and separately on Linux operating system as when i initially installed RedHat Enterprise Linux 6,i mistakenly did not select the application LVM itself.
Another issue i have not been able to fix is the Virtual Machine Manager.i have tried to connect but it keeps showing me the following error message on RedHat Enterprise Enterprise Linux 6.
Error Message from Virtual Machine Manager :
Unable to open a connection to the libvirt management daemon.
Libvirt URI is: qemu:///system
Verify that The 'libvirtd' daemon has been started
any advices,please feel free to let me know.thank you.I want to know if there is any way to install LVM (Logical Volume Management) manually and separately on Linux operating system as when i initially installed RedHat Enterprise Linux 6,i mistakenly did not select the application LVM itself.You can install the tools like this:
# yum install -y lvm2Although you can use the tools to construct new LVM devices and partitoins, you can't change your existing partitions into LVM.
Another issue i have not been able to fix is the Virtual Machine Manager. I have tried to connect but it keeps showing me the following error message on RedHat Enterprise Enterprise Linux 6:
Error Message from Virtual Machine Manager :
Unable to open a connection to the libvirt management daemon.
Libvirt URI is: qemu:///system
Verify that The 'libvirtd' daemon has been startedOn your physical host, do this:
# /sbin/chkconfig libvirtd on
# /sbin/service libvirtd startThis will start the virtualization tools. -
Integrating a PHP Web App with an Existing Azure Mobile Services and Mobile App
I've got an existing mobile app that is integrated with Azure's mobile services. The mobile services are currently connected to Azure Active Directory with MFA enabled. I'd like to build a separate PHP-based web application (Azure VM) that uses this existing
mobile service and authentication.
I reviewed the Azure PHP SDK, but didn't see any tie-ins to the Mobile Service. Additionally, Azure has some great tutorials, but for mobile services they all seem to focus on iOS, Android, and Windows phone. Any insight into how to tie a PHP-app into this
backend would be much appreciated!Although there isn't any client library for PHP, you can still access Mobile Service using the
Azure Mobile Service REST API.
Abdulwahab Suleiman -
Hi all,
Prior to the new year, I was able to backup my VMs (two of them) using Windows Server Backup on their host server (running Server 2012) without shutting them down, no problem. Something has obviously changed, and this no longer works.
When I try to back up my VMs now, the process basically seems to timeout during the 'Creating Shadow Copy of Volumes' phase. The error log file points to the 'Microsoft Hyper-V VSS Writer' as the culprit (Status [5]; Unexpected Error), and the specific
message I receive from WSB is: Component was skipped from volume shadow copy. The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
I've seen only a handful of useful articles online about this particular error, but nothing I've tried has worked for me yet, like:
- Making sure the integration services are installed and enabled
- Making sure Windows Server Backup is installed on both VMs
- Making sure there is enough disk space in the VM for the backup to complete
The most compelling piece of information is that this process worked just fine before the new year started and now I can't make it work at all unless I turn off my VMs and then run the backup. It just seems like there's some small thing I'm missing
(a service needs to be updated or turned off or on, etc), but I can't seem to find that information anywhere...
Any help is appreciated. Thanks...
-THi aalbert140110
you may want to try using our VssDiag freeware to inspect your Windows and Hyper-V logs:
http://backupchain.com/VssDiag.html
All you need to do is enter the date/time when the backup failed and it will collect whatever it finds
Hope this helps!
Octavio Tech Support @ BackupChain -
How to upload Images to azure media services and show the image on on click on Link?
Hi,
I want to upload the image to the Azure media service asset and show the Link on the page. When use clicks on the Link I want to show it user. How can I implement this with C#? Now I am uploading the image to asset as in the normal way and getting the URL
for that. But I am not able to show it user when he click on the image link.
Thanks,
Pavankuamr H KHI
Azure media services has a RESTful service and a C# SDK that you can use to interact with the Azure Media Services.
Here is the documentation and sample code for calling the Media services and using the SDK:
https://msdn.microsoft.com/en-us/library/dn735908.aspx?f=255&MSPPError=-2147217396
Aram Koukia | Blog: koukia.ca | Twitter:
@aramkoukia
Maybe you are looking for
-
Scanning Multiple Pages HP 8500A
Hi, I want to scan multiple pages into one pdf document. When I hit scan on the printer, it will scan and then send to my computer. It won't give me the option to add another page to the pdf. I need to know how to rectify this as I have many page
-
Mini-Jack to RCA connector scheme nee
Hi! I've purchased a Creative X-Fi card and got a receiver with bookshelf speakers for gaming and listening music, but didn't notice that SPDIF doesb't carry a Dolby Digital encoded sognal ;((. In such case I need to make the interconnectors from min
-
Hi Gurus Client has the requirement that they dont want to send their customer refunds if item is still at customers home. Please guide me how to configure this. thanks points will be awarded Nik Edited by: Nik Wallace on May 15, 2008 10:57 AM
-
UDP PORT 445 Not listed in System Process
Hi! Can you help me? I need the UDP PORT 445 listed on SYSTEM Process. I open UDP PORT 445 on Firewall (WSBS 2011), but in Syshelp (symatech validation too) the result is: Title: One or more network services, ports, protocols or associated processes
-
Black to purple gradient - white getting in the way - HELP!
Hi, I'm using illustrator cs3 and ive selected a black to purple linear gradient and the black is graduating to white and then graduating to purple, whereas I want it to go from black straight to purple. What can I do? Thanks, Adam