Azure Web role scaling not working when using Reserved IP
Hi,
I am using autoscaling feature for long time now on my web role deployment. I've recently create new deployment (with same web role bits) to use a reserved IP. Since that moment, the autoscaling is NOT working anymore. I can see many AutoscaleAction failures
in the Management Portal Operation logs.
When I try to update the role instance count using REST call (via Azure Management Studio of Cerebrata), I get the following error:
Code: BadRequest
Message: A reserved IP cannot be added, removed or changed during deployment update or upgrade.
I cannot find anything about scaling and reserved IP on the net but I can't believe I am the only one in this situation ?!?!
Thanks for your help
Jean Bédard
Regards, Jean
Hi,
Refer to the
Publish Windows Azure Application Wizard on MSDN, specifically #7 in Configuration Your Settings.
When ‘Deployment Update’ is checked, only the changes since your last deployment will be pushed out to update your services. This is not possible when changing the virtual network settings of the service. To enable full deployments, you have two options:
Uncheck the ‘Deployment update’ checkbox
Click ‘Settings’ on the ‘Deployment update’ item, and select ‘If deployment can’t be updated, do a full deployment’.
Similar Messages
-
How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?
Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best. -
Photoshop CC. Colour selection not working when using alt and brush.
Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ? -
Siri does not work when used for calling a contact function
Siri does not work when used for calling a contact function
Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it. -
HT204168 touch screen function not working when using facetime
Why is my iPad touch screen function not working when using FaceTime?
Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden -
Why is my touch screen function not working when using facetime
Why is my touch screen function not working when using facetime
Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)
Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?
-
Why does diadem intellisense not work when using scriptinclude or for global object
I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.
Here is more information on the issue.
I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.
'Test.vbs
class test
public function test1()
msgbox("test1")
end function
public function test2()
msgbox("test2")
end function
end class
'now create a object of the class
dim oTest
set oTest=new Test
'now when you type oTest. you get the following functions to choose from
oTest.test1
.test2
Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
'Main.vbs
Option Explicit 'Forces the explicit declaration of all the variables in a script.
call scriptinclude("c:\1atmp\Test.vbs")
dim oTest
set oTest=new test
'now when you type oTest. it shows none of the functions in the object oTest
oTest. -
Microphone not working when using a phone call, Microphone not working when using a phone call
Microphone is not working when i use my iphone 4, first day when i installed a iOS 7 , was all good, second day this happened. Please help me. When i use a Viber microphone working. I think this is not a hardwear problem.
Hi Mike
That was very helpful thank you.
I did as you suggested and found the "switch" was already turned on green. I swiched it off waited a while then turned it back on and microphone was back in use in viber. I have a sneaky feeling I may have to do this again in the future. I am not aware that I did anything that led to the microphone going off, but having said that I have only had the phone for a few days so may have done something when checking it out.
The phone has been a lot of fun after replacing my ancient Nokia with it. That Nokia worked in Morse code!
Best wishes
Rob -
Keyboard backlighting not working when using Windows in Boot Camp
Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary
Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.
-
Elements 11 - Brush tool not working when using layer mask
My brush tool won't work when using layer mask in PS Elements 11. I also have Elements version 10 installed and there it works fine. If I do the exact same proces in version 11 nothing happens.
Is this a bug or has something changed in the proces?
Please help.
Thanks.Make sure you have the mask thumbnail selected - it will be highlighted in blue.
-
Enter Key Not Working When Using Text Tool
For some reason, my enter key has stopped working when using the text tool. Instead of making a soft return to a new line, it simply commits the type. What is going on here?
I'm using a desktop and CS3.there are 2 enter keys in key board
if u enter main key board enter, sentence will go to next line
In case u enter the key available in rightside of the key board , in the cluster of numericals, the type tool is committed. -
@EJB not working when used in Cactus ServletTestCase
Hi All,
I am running my tests using Cactus ServletTestCase servlet and testing my EJB from there. I deploy my EAR application (my test servlet is in WAR, EJB in EAR modul)
When I run the test, I got NPE as the @EJB is not working and EJB ref is not initialized. Strange thing is, the @EJB is working fine from any other servlet or POJO in WAR.
Test result:
<webresult>
−
<exception classname="java.lang.NullPointerException">
<message>null</message>
−
<stacktrace>
java.lang.NullPointerException
at test.fenix.legalsubject.TestLegalSubjectController.testConvert(TestLegalSubjectController.java:56)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at junit.framework.TestCase.runTest(TestCase.java:164)
at junit.framework.TestCase.runBare(TestCase.java:130)
at org.apache.cactus.internal.AbstractCactusTestCase.runBareServer(AbstractCactusTestCase.java:155)
at org.apache.cactus.internal.server.AbstractWebTestCaller.doTest(AbstractWebTestCaller.java:120)
at org.apache.cactus.internal.server.AbstractWebTestController.handleRequest_aroundBody0(AbstractWebTestController.java:94)
at org.apache.cactus.internal.server.AbstractWebTestController.handleRequest_aroundBody1$advice(AbstractWebTestController.java:218)
at org.apache.cactus.internal.server.AbstractWebTestController.handleRequest(AbstractWebTestController.java:1)
at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody2(ServletTestRedirector.java:102)
at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody3$advice(ServletTestRedirector.java:218)
at org.apache.cactus.server.ServletTestRedirector.doPost(ServletTestRedirector.java:1)
at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody0(ServletTestRedirector.java:73)
at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody1$advice(ServletTestRedirector.java:218)
at org.apache.cactus.server.ServletTestRedirector.doGet(ServletTestRedirector.java:1)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:718)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:290)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
</stacktrace>
</exception>
</webresult>
my test class:
public class TestLegalSubjectController extends ServletTestCase {
* Class under test
static final Logger log = Logger
.getLogger(TestLegalSubjectController.class);
* TODO nemuzu to rozchodit
@EJB
public LegalSubjectController legalSubject;
local interface:
@Local
public interface LegalSubjectController extends ControllerFilter {
public LegalSubjectWizardData getByID(Long ID);
public void createLegalSubject(LegalSubjectWizardData legalSubjectWizardData);
public LegalSubject findByName(String name);
EJB implementation
@Stateless
public class LegalSubjectControllerBean implements LegalSubjectController, LegalSubjectControllerRemote {
private static final Logger log = Logger.getLogger(LegalSubjectControllerBean.class);
I am stucked with this one, dont want to use the EJB2 way with JNDI look up. Any suggestions much appreciated!Was anyone ever able to figure out a solution for this issue? I'm having the exact same problem right now and this is the only reference to it I've been able to find online.
Thanks!
-Blake -
JSLink not working when using any list ViewStyles other than default.
Hi,
I have a custom field and i am doing client side rendering of it using JSLink for ListView form. I started by applying the JSLink in custom field class.
public override string JSLink
get { return myJSLinkPath; }
set { base.JSLink = value; }
Everything seems to work fine and i can see my custom field get rendered properly. Till this point i was using the default sharepoint list view style. After sometime i decided to use the shaded listview style which is <ViewStyle ID="17"
/> to get the alternating row color style in my list. After applying this style, my JSLink stopped working, infact it is not even registered on page now. I have tried different ways to set JSLink property like it is mentioned in the following link but it
didnt worked.
http://www.martinhatch.com/2013/08/jslink-and-display-templates-part-1.html
So my question is, how to apply JSLink while using the shaded (or any other) viewstyle?Arham,
When you register your display template, I'm guessing you're using both ListTemplateID and BaseViewID in the registration code?
It's likely that the BaseViewID is different for the Shaded ViewStyle. You should still see your code registered on the page in the Head element, but when it runs I think the registration is getting ignored.
Using the debugger in IE or chrome should allow you to step through the Display Template registration and double check what the value of BaseViewID should be.
You can of course override this if you want, I use a similar method in a blog post on fixing the clash with multiple web parts and JSLink on a page which may help you.
http://www.myfatblog.co.uk/index.php/2013/09/listview-web-part-issues-with-jslink-and-display-templates-a-solution/
I'll give this a test on my dev environment when I get home and see if I get the same results when adding the JSLink through the webpart properties.
##EDIT##
Ok, I tried this at home using a Field Display Template and it worked on all the different styles, however this was with the JSLink deployed through the list view web part properties, not declaratively in the field declaration.
It does prove however that it's not the BaseViewID causing the problem.
##/EDIT##
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times. -
WMI InvokeMethod for StartService does not work when used with ManagementOperationObserver on IIS
Hi,
I am using .net 4.5 and C# to remotely restart the services. I am using WMI to do this task. This code works when called from windows application on the machine, but same code when used inside web application it gives exception of invalid parameter.
We saw it log error in System Event log
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
and APPID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
to the user IIS APPPOOL\<app pool user> SID (S-1-5-82-634865507-143429395-1373251082-3464226226-3883016302) from address LocalHost (Using LRPC). This security
permission can be modified using the Component Services administrative tool.
I am pasting below code for reference.
m.InvokeMethod(observer, "Startservice", null, null);
//wait until invoke method is complete or 30 sec timeout
int intCount = 0;
while
(!completionHandlerObj.IsComplete)
if (intCount > 60)
MessageBox.Show("Inside 30 seconds");
break;
//wait 1 sec.
System.Threading.Thread.Sleep(1000);
//increment counter
intCount++;
//see if call was successful.
if (HandlerObj.ReturnObject.
Properties["returnValue"].Value.ToString() == "0")
isStarted = true;
DhanajiFor web apps the context will be the context of the app pool. Unless you set the app pool to run as a user account that has admin privileges on the remote machine then you won't be able to control the services on a remote machine. If you have
enabled Win auth such that the app runs in the context of the remote user then you might need to turn on delegation otherwise the hop won't work.
Note that if you are using Win auth then consider using ServiceController instead which provides the same functionality as WMI but with a cleaner syntax. This wouldn't work if you need to impersonate a user though.
Michael Taylor
http://blogs.msmvps.com/p3net
Maybe you are looking for
-
How do I get firefox to auto update the restored tabs like it used to do?
It will restore my pages and tabs from the last session, but it no longer updates the tabs with the latest information.
-
WEB ADI Error with Excel - Compile Error
I am trying to export data to Excel. The process works until the data is loaded to Excel whereupon I get a Microsoft Visual Basic error "Compile Error: User-defined type not defined. Behind the error message is several screens from VB with the follow
-
Is it possible to make a broadband connection in iOS for ipad?
Hi, is it possible to make a broadband connection on iPad using iOS 6.1.3 ? As I had this problem in my apple devices, I searched a lot and finally I found out how to make a broadband connection like what what we do on widows 7 or windows 8 on Mac OS
-
I Have an iPad 2 the screen has gone blank, I have held both home and off button but nothing working the screens still blank. I have also reset my iPad via iTunes but now the screen is blank but it's flashes white and you can vaguely see hello, hallo
-
Would anyone no why my quicktime isn't opening my video files? I've updated my software but still nothing.