[b]9iAS Rel 2 On P4 running XP Pro[/b]

I would like to know whethr 9iAS rel 2 (9.0.2.0.1) can be installed on a P4 m/c running XP Pro.
I have tried the follwoing workaround till now but to no avail,
1)Renaming the symcjit.dll files and then running the installation.
2)Replacing the symcjit.dll file with the new symcjit.dll file and then running the installation.
3)Renaming the symcjit.dll files and setting the -nojit flag in the oraparam.ini file and then running the installation.
4)Installing the jre-1_2_2_011-win after downloading it.
Replacing the symcjit.dll file and adding the bin path to the environment variables and then running the installs again.
5)I have even applied the patch 1507768 and then tried the install.
These workarounds have failed.
Is there a way out??
This is extremely urgent.
Any help/pointers will be helpful
Regards
KK

How did you uninstall Oracle? You cannot use the Oracle Installer to remove Oracle. To completely remove Oracle from a Windows system you must edit the registry and several other steps. If you need these procedures, send me an e-mail: [email protected]

Similar Messages

  • LDAP Error 50 configuring OC4J in 9ias Rel 2

    Hello everybody,
    I'm trying to install 9ias Rel 2 on a Windows 200 Server machine.
    Unfortunatly after 3 tries i'm continuing receiving the following error during the OC4J configuration step in a Business Intelligence Installation type ( i want to say first that all the Infrastructure installation and configuration was successfully executed and that i stopped the EM before starting the OAS installation to avoid to have conflict with the dcmctl tool):
    The configuration files for this Oracle9iAS instance are inconsistent with the
    configuration stored in the repository. In order to protect the repository,
    no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. Please check the logs located at
    ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
    the configuration files on disk. Some possible causes are:
    - permissions on files
    - file contention issues on Windows NT
    - EMD and dcmctl running concurrently
    - internal Oracle error
    After resolving the problem that prevented DCM from updating the configuration
    files, you may use the dcmctl resyncInstance command to resolve the problem.
    Alternatively, you can stop and then restart the active dcmctl or EMD
    process and resyncInstance will automatically be performed.
    The dcm.log says:
    [ RM ] Exception in repository API getDBConnect()
    CDATA[oracle.ias.repository.schema.SchemaException: Unable to retrieve the requested attributes:javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient Access Rights]; remaining name 'orclReferenceName=iasdb.db1.acclaris.biz,cn=IAS Infrastructure Databases, cn=IAS, cn=Products, cn=OracleContext'
    at oracle.ias.repository.directory.DirectoryReader.getAttributes(DirectoryReader.java:171)
    at oracle.ias.repository.directory.DirectoryReader.getAttribute(DirectoryReader.java:126)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:333)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:415)
    at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:197)
    at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDBConnect(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.getSeedInfo(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.isDBConfigured(Unknown Source)
    at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
    at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.initRepository(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
    I have tried 3 times (everytime after deinstalling and cleaning the machine), and got the same error.
    Can anyone help me? It's really urgent and i spent a lot of time without solving it yet.
    Thanx in advance

    I have had the same problem getting any dates from Oracle as well but after talking to Oracle and bugging them about it here is the response I received:
    Sun Solaris before May 31
    MS Windows - Solaris date + 8 weeks
    Red Hat 7.1 - Solaris date + 1 week
    SuSe SLES7 - Solaris date + 1 day
    True64 - Solaris date + 4 weeks
    I don't know how reliable these dates are but I thought I would pass on what I have been told, since some information is better than none.

  • 9ias rel-1 reports showjobs - Netscape

    We are running 9iAS rel 1 10222 Patch 10 and are serving up reports via servlet. The problem is when you goto the shojobs webpage via servlet, Netscape cannot correctly display the page but IE can. The problem is that there is a line like "Expires: Fri, 02 Nov 1964 00:00:00 GMT" displayed before the first <html> tag in which Netscape does not like. IE is a little more forgiving and will ignore it and continue on. This problem does NOT happen if you access the showjobs via CGI instead of a servlet. Problem is, I really need the servlet piece to work as a requirement of the company and I need to use Netscape because the OS/Clients are using is linux.
    Does anyone have any ideas on how to fix this?
    Charles

    The Expires tag is written in the begining of html page. This looks to be a method so that browser do not take the page from the cache if the same request is send again. This tag is written both in case of RWCGI as well as in RWServlet but some how servlet is unable to recognize the tag and this gets reflected in the html page.
    There is a bug1959792 filed on same issue and is published alos. You can check the status of bug from metalink site.
    Thanks
    Rohit

  • How can i add a new viewer to 9iAS and push client to run it ?

    Dear All,
    I hosted a page on Oracle9iAS which has links to documents of different types of desktop applications, for example: MS word, Excel, AutoCad ......
    And i've a mutiformat viewer which i need to install it on Oracle9iAS to be run when a client tries to access any of the listed documents. So, how can i install this viewer to Oracle 9iAS and push client to run it ?

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • No net services installed with 9iAS Rel 2 Mid Tier

    After installing 9iAS Rel 2. (9.0.2.0.1) Mid Tier only, no infrastructure of Business Components, we discovered that this did not include Net Services. I realize that installing the 9iAS Infrastructure includes installation of Net Services to support the infrastructure database, however, is it possible to include the Net Service installation with only the mid tier? There is currently no local database installed on this server and only one ORACLE_HOME which supports the AS Mid Tier. Finally, if I install Net Services, should I install it in the same ORACLE_HOME as the 9iAS Mid Tier or create a second ORACLE_HOME?

    <Repost>

  • ITunes 10.5 will not sync to my BlackBerry. I sync's outlook fine with desk top manager, but when I select music DM says connect device. It also tells me to install iTunes!?!? Running XP Pro w/SR3 and BBerry Tourch 9810.

    iTunes 10.5 will not sync to my BlackBerry. I sync's outlook fine with desk top manager, but when I select music DM says connect device. It also tells me to install iTunes!?!? Running XP Pro w/SR3 and BBerry Tourch 9810.

    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), IVIASPI (1.0.0.0), CDR4_XP (8.0.0.212),
    UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.0.6.1),
    hmmmm. you've got rather a lot of burning software entries in there. (it looks like you've got some kind of Roxio product installed, as well as itunes and Alcohol 120%.)
    by way of experiment, try the technique described in the following document (remember to take a backup of your device filter registry keys first).
    iTunes for Windows: Troubleshooting CD issues caused by device filters
    do you still get the itunes message with just the iTunes filters in place?

  • I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

    I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

    I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
    My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As".  So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail.  I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, and then try again."
    Here's what I know:
    The server -- Peter's iMac (8) does exist;
    The server -- Peter's iMac (8) is available at this time;
    The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
    The server IP address is correct, as specified in the system sharing preferences;
    The network connection is active when I attempt to connect.
    I'm convinced the problems stem directly from the OS X Yosemite update.  None of this was ever remotely an issue in the previous OS X's -- any of them.  This is maddening!  What can be done?  Apple?? Anyone???

  • I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leaopard on one drive and Mountain Lion or Lion on others?

    I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
    I need to keep Snow Leopard so that I can run some old softward.

    If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
    CCC can clone Lion Recovery - great for moving or backup.

  • How to make Address Book obey Preferences? I run MacBook Pro 4.1 laptop,  Mac OS X 10.6.8  Address Book 5.0.3 (883) Preferences set at ... General First name following Last name   Sort for Last name Address Format Canada Font size Large Phone format set a

    How to make Address Book obey Preferences?
    I run MacBook Pro 4.1 laptop,  Mac OS X 10.6.8
    Address Book 5.0.3 (883) 
    Preferences set at ...
    General
    First name following Last name 
    Sort for Last name
    Address Format Canada
    Font size Large
    Phone format set at
    +1.123.456.7890
    When application quits - it's all forgotten and it self-resets to
    unwanted configuration.

    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

  • What is the best laptop to run Premiere Pro cc?

    Hi everyone,
    I've been having a lot of problems with Premiere cc since I downloaded it a few months ago and am now realising the problem is with my computer.  I have a late 2012 Macbook Pro, 2.5 ghz, 8gb Ram, intel hd 4000 processor which just doesn't seem to have the juice to run Premiere pro smoothly.  If I do any kind of editing, even just colour correction, the footage gets very sticky when playing back in Premiere.  if I try anything advanced like adding warp stabilier the program crashes.  I also bought magic bullet looks and I can barely open it without the whole computer having a meltdown.
    This has been extremely frustrating and has made working with Premiere pro a nightmare.  I am now planning to buy a new laptop/pc and am looking for suggestions on what to buy.  i am looking for best bang for my buck.  While I would be willing to spend over a £1000 I would obviously prefer not to if I don't  have to.  I thought my Macbook Pro would have more than enough horsepower to handle it and have been left dissapointed and frustrated so would really appreciate some advice from the wider Adobe community on this.  I am also open to suggestions on desktops, not just laptops.
    Thanks!
    Tony

    Hi Jim,
    I am using it solely for wedding videography so it quite basic stuff.  I am filming on a canon 7d and really just looking or something that I can edit the footage with and put on some light effect/colour grading.  I am not able to say what level of effects I will be needing to use as at the minute when i try anything other than basic editing the programme has a stroke.  Like I mentioned I have Magic Bullet Looks suite sitting waiting for me but I haven't even had a chance to try it out.  One effect I really like but know that it is processor draining is some warp stabiliation .  There are certain shots it really lends itself to but I just bought myself a nice monpod and fluid head so shouldn't need that anymore.
    Last night I tried downloading Premiere cc onto my girlfriends £500 basic desktop and to my great surprise everthing ran like a dream! (compared to my computer anyway).  Is this normal, that a cheap desktop would so comprehensively outperform a 12 month old Macbook Pro?  I am wondering if there is an unresolved problem with the macbook itself.
    To give you an example, if i have put warp stabilisation on a clip on my macbook I have to put it at 1/4 resolution for it to playback and even then it is extremely choppy and sticky and sometimes crashes the programme.  Last night on the budget desktop I was able to put it to full resolution and it played smoothly, just like it would if it had been exported.
    Any advice you could give on this would be much appreciated.  ive been round the traps with apple and adobe tech guys and neither of them can find anything wrong with the computer or the programme.
    Thanks,
    Tony

  • I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, the cut the recording into songs using one audio file folder. When working on an individual song, I can't access the sampler.  I get the message "nothing to display"

    I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler.  I get the message "nothing to display" or "no region or audio file selected"  After much research on the web, I believe this is a permanent bug.  Does anyone have a good work-around for this type of work.  We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler.  Thanks in advance for your ideas!  Cheers.

    Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track.  I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project.  Thanks again.

  • I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    Well, how have to determined no signal is being recieved to your mac?
    Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
    I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
    I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
    Otherwise, if you just want to get this working we can have a look a bit deeper.
    And driver? OS X driver?

  • Would a 13" Macbook Pro (2.4GHz) be able to efficiently run Logic Pro?

    I'm thinking of buying a Macbook Pro, but I'm really tight on money. Would the lowest model of Macbook Pro still be able to efficiently run Logic Pro?   

    It will run just fine.

  • I am running Acrobat Pro 9 (9.5.5).  Do we have to purchase the new version if we  have never upgraded?  Or are we entitled to an upgrade to the latest version.

    I am running Acrobat Pro 9 (9.5.5).  Do we have to purchase the new version if we  have never upgraded?  Or are we entitled to an upgrade to the latest version.

    I am not really clear on the intention of your question.  If you are going to get the latest version you are going to purchase it.  When you go to purchase it you should be able to see if there is an option to purchase it as an upgrade from the version you currently have.  I cannot find the purchase page to check myself... I can only find the subscription option.

  • Errors running acrobat pro xi

    I was getting the security prompt each time I tried to run acrobat pro xi so I uninstalled and reinstalled.  Now when it launches, I have to pick english from the window since Italian is picked.  However, after I pick english, it still tries to make me log into adobe and it asks it all in Italian.  What is up?

    uninstall, clean and reinstall per, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

Maybe you are looking for