B/S Entries requires a Proft Center assignment - 3KEH not working

I'm getting an error when I'm trying to default a Profit Center on a FI transaction to B/S GL account. Following are the config settings that I have maintained. However when I look up the document, the profit center field is showing <blank>
1. For the B/S account, I maintained settings in Trx: 3KEH to deafult a Prf Center
2. I've changed the Profit center field to optional on the FS Grp of the B/S GL account
2a. When I try posting a transaction to this GL account, Profit center given in 3KEH is not being populated
3. I tried using a derivation rule by the GL account and Company Code to a default profit center in Trx: 3KEI.
3. The profit center is still not getting the default value (its showing blank) when I post a journal in FI to that Co Code and that GL Account.
Can anyone pls tell me if there are any additional settings required to get a Prf Center derived on the Balance Sheet entries
THanks
SB

Im not sure I understand your point.
Here is what I'm looking to achieve.
I post a FI transaction on a Balance Sheet account say 1111.
I have a contra account for this posting say 2222.
Now whatever I post to account 1111, I want track the amount in a profit center as well (say PC1111) . I can achieve this by entering "PC1111" in the profit center field at the time of FI transaction posting. This would result in a PCA document.
What I'm looking to acheive is to default the value "PC1111" when ever I post to GL acct 1111. I tried doing this in Trx: 3KEH but it did not work for me.
Thank you for responding anyway.

Similar Messages

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

Send email when ownership is assigned' is not working

Send email when ownership is assigned'
is not working
even though this option is disabled designer workflow task creation sends an email to the user when task is assigned to the user.
We have october CU updates 2013.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
Per my knowledge, if the task is created from a workflow, then you may use the task actions in the workflow.
And some task actions will send an email to the user who the task is assigned to, so the email is sent from the workflow and it is not sent from the option “Send email when ownership is assigned”.
If you are using 2013 workflow, the send email action cannot be prevented from the workflow.
If you are using 2010 workflow, you can go into the task process to delete the Send an Email action.
https://support.office.com/en-nz/article/Use-the-task-process-editor-for-approval-workflows-8680b4a4-36b1-441c-b070-e515976078aa#__toc264538566
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How to find cost center assigned to a work center

Hi Guys,
I need to find cost center assigned to work center.
from Which table I should to get it.
Cheers
S Kumar

Hi,
Please use the table CRHD to get the object ids and then go to the table CRCO with the object ids and get the Cost center assignment to resources.or you an create a query by SQVI and use it.
regards,
kaushik

Cannot create sales order as profit center assignment does not take place

Hi,
I am trying to create a sales order but am unable to create it as the profit center value is not picked up the value from material master.And hence, the incompletion log prevents me from creating the sales order. I seem to have done everything correct so far but somehow the profit center field (Account Assignment Tab at item level) remains empty. Instead, i can find the profit center value in "Assignment to Profitability segment".
What should i do so that my sales order picks up the profit center information ?
Thanks in advance.

Hi,
check this link it may helpful,and do search in the forum you may find an existing solution for you problem.
RFBIBL00 - issue in Batch Input Session created
Thanks
Ram

F-44 profit center clearing does not working

By using T.Code o7F1 I have activated the field Profit Center Field in Additinal Selections Criteria for F-44 (Vendor Clearing), F-32 (Customer clearing) and F-03 (Gl Account Clearing). When I am doing clearng by giving profit center clearing option, the system is throwing warning messate that "No open Items found". My requirement is Profit Center Wise clearing Should happen. What else i need to do for achieving this task?
Please suggest?

Hi BVR,
If you are using ECC 6.0 system will automatically split the profit center documents.
Check the Split valuation configuration.
Explore the problem..
Regards
Kishroe K

Help Center in aperture not working

When I go to the help center in aperture, I see all the topics and outlines, but all the entries are empty and I get an error that I am not connected to the Internet (I am). I have seen others mention it and the answer always seems to be to go to a website by creating new links, etc. I want a fix for the help center issue itself, not a workaround. Does anyone know how to resolve this issue?

What is your Aperture version, Eytan?
Is that the message you are getting?
That message usually will be shown, when Aperture cannot connect to the Internet to download the help text.
If you are connected to the internet, but still the help does not show, check, if a firewall or anti virus software (Little Snitch) may prevent Aperture from connecting to the server. Reboot.
Try the general trouble shooting steps: Aperture 3: Troubleshooting Basics
I'd start with removing the preferences and reinstalling Aperture.
Regards
Léonie

OKB9-Internal order assignment is not working

Dear Guru
I have an Requirment that whenever Billing document get posted data must flow to xxxxx Internal order.I assign the Internal order to cost element in OKB9.But not when posting billing document I cant see internal order in accounting or general ledger view.

Hi Deepali
If copa is active, revenue will post to copa. Okb9 is just a default and is used when no other cost object found
If you want biling to post only to Int order, assign it in your sales order account assignment tab
Note that in vkoa, you will need to maintain GL acct against Kofi and kofk both in that case
If you want it to post to both IO and copa, enter IO along with Prof segment in sales order
Br. Ajay M

Sender Agreement - Assigned Users not work

Hi Experts,
I have a scenario SOAP - XI and I want to establish authorization to certain users. I am trying to assign user to the Sender Agreement but it does not work.
I am using in the URL the next prefix /sap/xi/engine?type=entry, but if I use the prefix /XISOAPAdapter/MessageServlet, it works fine.
Is it possible to assign users to Sender Agreement using the prefix /sap/xi/engine?type=entry?
Thanks,

Hi,
There are two ways of sending a message to XI using SOAP Adapter. The first one is to the adapter engine via ./XISOAPAdapter/MessageServlet. The second one is to the integration engine via propose URL. The first one will use the sender agreement because it is considered a java call but the second one will not (same with PlainHTTPAdapter).
Hope this helps,
Mark

Account Assignment Trigger not Working

I'm working on Siebel Assignment Manager.. first I try to Assign Service Request to an Employee and in two Assignment mode (Batch and Dynamic) and it's work fine.
but when I try to assign Account to a Position, and I follow the same steps I followed before, the monitor work and the owner change depending on the Score and the Rule not working ...on the other hand the trigger (Dynamic) not working at all, and there is no change
I have searched to know where is the problem …and didn’t find solution
please help me ASAP
Thanks & Regards,
Enas

Hi Glenn,
Thanks for u r replay.
We are using our own ZVIEWS. We have copied the Bupasearch view and we done some modifications according to our requirement.(added DOB field)
We got DOB in our Zview. But Customer search functionality is not working.
Plz help me to solve the issue.
Thanks,
Sreedhar

Unchecking Required Field from Form Field is not working

I am trying to un-check a field to a disable the required field function and it will not let me uncheck the box, its ghosted out. Upon filling out the form as-is > I enter text in the field as it requires and even after entering information it gives me an error and says its not filled out??!!!! I spent a lot of time on this form and do not have the time to recreate it just to risk getting the same result....

Hi
Did you rename the email field to Last Name? That's the only entry which will not let you uncheck this option.

Why is code to get center of image not working?

Hey there. I have am trying to establish the center of the imags that load so that I can put them in the center of the stage. I am doing this as each image is a different size.
Here is the code i have gotten to work before but its not working now and I have been searching to find what I have done wrong with no luck. : (
Would you look it over and maybe you will see what I am doing wrong?
public function placePicture(e:Event = null):void {
     rawImage = imageData.image[imgNum].imageURL;
     lastImageIndex = imageData.*.length() - 1;
     imageLoader = new Loader;
     imageHolder = new Sprite;
     imageLoader.load(new URLRequest(rawImage));
     imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
     imageLoader.y -= imageLoader.height/2;
     imageHolder.x = 640; //this is the center of the stage
     imageHolder.y = 100;
     imageHolder.addChild(imageLoader);
     masterHolder.addChild(imageHolder);
The result when I publish is the picture comes on stage but the top left corner goes to 640 instead of the center of the image going to 640.
I tried several variations of this all with the same result:
imageLoader.x = -1*imageLoader.width/2;
I tried using setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php
and I tried doing all of the above by inserting the loader into a sprite and then applying the code to the sprite and then adding that sprite to another sprite and putting that at 640 and not inserting it in another sprite and trying to straight up put the existing sprite at 640 (hopefully that all makes sense). And I have tried to put it to width/3 and nothing different happens.
If you have any other ideas or can see what I am doing wrong I would really be gratefull for some tips! : )
Thanks for any help!
oh, and I am getting no errors on this.

the image's width and height are not available until loading is complete. ie, use a complete listener/listener function.

When I started my PC this morning I got a pop-up message stating that CC has damaged files and required downloading. Indeed, CC did NOT work and subsequent attempts to download CC never got beyond the initial installer box. I am at my wits end here. Have

When I started my PC this morning I got a pop-up message stating that CC has damaged files and required downloading from www.adobe.com/go/adobecreativecloudapp. Indeed, CC did NOT work and subsequent attempts to download CC never got beyond the initial installer box. The posted link also appears to be bogus I am at my wits end here. Have other users experiences this issue? Is this a clever intrusion?

Please ensure you have the latest version of the Creative Cloud app installed
http://helpx.adobe.com/creative-cloud/release-note/cc-release-notes.html
We also have this solution for the having to sign in on every product launch
http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
You can also try uninstalling & re-installing the CC.
Regards
Rajshree

Center Button Will Not Work???

Hi everybody,
Here is my problem: my select/center button on my 3rd generation iPod nano is not working. I went to itunes on my computer, and clicked restore, now on my iPod it's stuck to the language setting. What do I do?
Message was edited by: Nick61312

You should go to the Apple Store, to get a new iPod Nano, there is a malfunction in your iPod's center button, i don't think restoring it helped at all, my guess is that it's a hardware problem.

B/S Entries requires a Proft Center assignment - 3KEH not working

Similar Messages

Maybe you are looking for