B/W G3 install larger HD help
I have an 8GB HD and an 80GB HD installed into my Blue & White G3 running 10.3.9. While I'm awaiting my CDs of 10.4.4 through Apple's exhange program, I want to get a much larger drive to replace the 8GB the B/W came with. Are there limitations on size or kind of drive? A long time ago I was told I could NOT replace the original drive the G3 shipped with. Is this true? Can I do this myself? I'm not afraid of plugging cables into connectors and removing screws from chasis. -- Pete
Pete, welcome to the Apple Forums. There is a vibrant set of forums on the Blue & White G3 available here:
http://discussions.apple.com/category.jspa?categoryID=115
If you post there, your query will get read by folks with the most appropriate expertise to help you. Also, you may be able to read previous posting on the same topic.
Similar Messages
-
my itunes has gotten error 7 (windows error 14001) itunes wont even open it just says itunes was not installed correctly. someone help please
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Every time I select an emoji to send in a message, my message closes out. I have tried everything, shutting the phone down, re-installing, etc. Help!
Every time I select an emoji to send in a message, my message closes out. I have tried everything, shutting the phone down, re-installing, etc. Help!
-
hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work. -
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help. Am trying to work on document from office computer at home on laptop.
This is what the pop up says:
You need a newer version of Numbers to open this spreadsheet.
You can download the latest version of Numbers from the Mac App Store.
Thanks,WS,
At first, it can be difficult to determine which version of Numbers you are using. The user interfaces are different, but if you are new to the apps you may think you are using the new version when if fact you have launched the older version. Make sure you are using Version 3.x. Then you won't get the message that you need a newer version.
Use Spotlight to launch Numbers. After typing Numbers into the search field, pick the result that says "Numbers -- Applications".
Jerry -
Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5)
Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5) I have disabled my security software, but that doesn't help. Any ideas?
http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
-
Applications don't install..please help
I own a Nokia n81 8 gig. It has 3 n-gage demos bundled but only one of them is installed, space impact. Fifa and asphalt demos are not installed and when I try to install them with the application manager it says that the certificate is expired, may not be valid or the phone's data setting may be incorrect!
What I find strange is that if there is a bad setting, the space impact won't install either
Any help???
Thanks a lotHi set back ur date to 1/1/2007
it will be allright..if same problem occurs then set back ur date to 1/12/2006
chears!!
RIZZ D@ GR8 -
i have been using a jailbreak iphone 3gs. recently i have officially unlocked. i have updated the os. but i am unable to activate my phone. it says no sim card installed. cud u help?
Jailbroken phones can not be discussed here.
It's highly likely that it is now bricked. The jailbreak most likely did permanent damage. There are lots of reports of previously jailbroken/hacked phones that become unusable when attempting to apply a legitimate unlock. -
Installed BT Desktop help,now PPPOA is crashing be...
I installed bt desktop help yesterday, my hub3 as been connected since the mods reset my snr and took off the banding(so they say,i think its just been raised a little because my speed is now continuessly 12.5meg even after all the disconnects today),i went to bed at 5am this morning,got up at 2pm,looked in hub event log because i noticed my hub timer had been up only a few hours,at 6 am it tried to communicate with motive which is bt desktop help, its full of motive modules and drivers and services, obviously it cant comunicate while the pc is off so it made pppoa go down after 2days, then it tried again at 9am and did the same, and again at 12pm, i suspect if i never turned on my pc that it would of tried again at 3pm, i turned the pc on at 2pm.Before installing bt desktop help(motive) my event log is completley clear of motive acs username addresses, not once as it tried to communicate with this address so it must be down to the desktop help, thing is if i uninstall bt desktop help it seems to mess things up as my pc wont auto sign ip addresses and network gateways(wont pick up the hub) so basiclly bt desktop is here to stay unless i re install the whole os, my advice is dont install it you will be so peed when you cant get a perfectly working pc to function normally after you try an uninstall bt desktop help,i went through everything manually(the registry, all folders etc) and deleted everything to do with desktop help but it made no difference,i still had to run diagnose to get the pc to connect to the hub,i repaired the ip stack, reset the winsock catalouge and still no different,i reinstalled desktop help and it works again,so there you have it, im now stuck with the hhb3 trying to communicate with motive when the pc is off there im not going to be able to maintain a constant connection
The hub3 tried to communicate with motive again while my pc was off, im now back to a high snr and 9meg ip profile which is stuck again, upnp is creating ports which i presume is desktop help,(i hope)i uninstalled desktop help and hard reset the hub but its still creating ports and still communicating with motive acs username, i have a few after the hard reset, some say ( 175.300000) Initializing transaction for event code 6 CONNECTION REQUEST, and,( 162.120000) Server URL: https://pbthdm.bt.motive.com; Connecting as user: ACS username,and,( 107.610000) Server URL: http://pbthdmw.bt.motive.com; Connecting as user: Default username. These are my stats now, i used to be 12.53meg with snr of 6.0db
FAQ
<script type="text/javascript">// paintProgressAndMessageOnBar(100,"The test has successfully completed" ); // </script> Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
8934 Kbps
0 Kbps
21000 Kbps Max Achievable Speed
Download speedachieved during the test was - 8934 Kbps For your connection, the acceptable range of speeds is 4000-21000 Kbps. Additional Information: Your DSL Connection Rate :11320 Kbps(DOWN-STREAM), 1171 Kbps(UP-STREAM) IP Profile for your line is - 9987 Kbps
2. Upstream Test: -provides background information.
Upload Speed
868 Kbps
0 Kbps
1171 Kbps Max Achievable Speed
>Upload speed achieved during the test was - 868 Kbps Additional Information: Upstream Rate IP profile on your line is - 1171 Kbps
We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly. If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit FAQ section if you are unable To understand the test results.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 01:16:39
Downstream:
11.06 Mbps
Upstream:
1.144 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
8.9 dB / 6.2 dB
Line attenuation (Down/Up):
29.2 dB / 13.1 dB
Output power (Down/Up):
20.3 dBm / 11.7 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
94 / 121
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
296 / 66
Error Seconds (Local/Remote):
72 / 83 -
I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...
Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance. -
How to install SQL*Plus help facilities and demos.
Hi, everyone
It appears error message say "failure to login" during SQL*Plus
part of the Oracle8 full installation. I knew that system want
to install SQL*Plus help and demos through logining one of
dba account(maybe system user account). However, due to
password's reason, can not log in SQL*Plus, so installer can't
execute named pupbld.sql script, result in SQL*Plus help and
demos can not be installed.
Now, I am intend to install these stuff lonely.
Could anyone help me? thank a lot.
William
nullHi,
The pupbld.sql isn't the correct script to create the help
facility, it just creates product and user profile tables.
The help script is at $ORACLE_HOME/sqlplus/admin/help (run as
system)
cd $ORACLE_HOME/sqlplus/admin/help
sqlplus system/<password> @helptbl
sqlldr system/<password> control=plushelp.ctl
sqlldr system/<password> control=plshelp.ctl
sqlldr system/<password> control=sqlhelp.ctl
sqlplus system/<password> @helpindx
I think it is necessary to run the pupbld.sql script, without
this script everyone who logins in oracle with sqlplus will see
an error message, but... Run the script again:
$ORACLE_HOME/sqlplus/admin/pupbld.sql
Best regards,
Ari
William (guest) wrote:
: Hi, everyone
: It appears error message say "failure to login" during SQL*Plus
: part of the Oracle8 full installation. I knew that system want
: to install SQL*Plus help and demos through logining one of
: dba account(maybe system user account). However, due to
: password's reason, can not log in SQL*Plus, so installer can't
: execute named pupbld.sql script, result in SQL*Plus help and
: demos can not be installed.
: Now, I am intend to install these stuff lonely.
: Could anyone help me? thank a lot.
: William
null -
yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.
See this support doc on how to use FT... http://support.apple.com/kb/HT4319
-
PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.
I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
I managed to install other software, but not able to install CS5 Web Premium.
Ive downloaded the electronic version via Adobe Downloads, but not able install it.
Maybe you are looking for
-
RIch text forum issue since reinstall of OS
Ever since I reinstalled my system software (10.4.11), I have been unable to utilize rich text editor options available for forum posting. (not this forum - about.com is one of them). In Safari, the editor toolbar is non-existent when posting/editing
-
Help with Nokia 5530 Xpress Music
Hi, i have purchased the nokia 5530 xpressmusic game edition, unfortunately i lost the memory card, it came with 20 games, anyone knows how i can find a backup of this games so it can be restored to factory settings into my new memory? Thanks in adva
-
Hi All, My Web application is FBA application and I am using the lists.asmx services in my custom webpart. To run this lists.asmx service in FBA enabled site we need to use Authentication.asmx service.. I referred this link: http://social.msdn.micros
-
Problem viewing TV through HDMI cable- displays unavailable
I am unable to see my mac on my TV (Samsung Smart TV), I have a Macbook Pro from mid 2010, connected with a Belkin Mini DisplayPort to HDMI cable, and the latest software update, OSX 10.9.1, when I go to Displays I can not see gather windows, or any
-
Movement Type 319 "Split structured material into components "
Hi SAP Buddies Can we use Movement Type 319 "Split structured material into components " in MM functionality if Yes please tell me how ?.. .. Since 319 related to Retail. But Somewhere I found it is fulfilling my client requirement.. Thanks In adva