B/W video recording in N-93 with firmware version ...

I have noticed the following after I upgraded to firware 20.0.058.in N-93
Do the following :
Pick a low lighted area
Start main camera
Select Video mode
Select Auto mode
The display will show colours
Now switch to night mode
The display will turn to black & white and video will record in B/W too.
Now switch to still mode
Select Auto mode
Display will be in colour
Select Night mode
The display and picture taken will again be in colour with details in dark area revealed
Now the question why does N-93 record / display in B/W
in video mode under the same lighting conditions while in still mode all colours come out perfectly and dark areas
given the fact the N-93 uses the same camera , same CMOS and same image processing software ?
If my post has helped you please click the white star on the right

3Julian
Today I visited Nokia care after i heard from them telling that have put a patch. I went there and saw their N-93 with the patch.Absolutely no improvement. I talked to the senir technical guy about this. He said he will escalalte the matter.
Another thing. Have you tried using bar-code scanner ?
It sucks. It takes ages to decode
If my post has helped you please click the white star on the right

Similar Messages

I have a WRT54G Wireless modem with firmware version 1.02...

I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
What is wrong?

Which version of the WRT54G do you have? If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
The version of the router is important. Each version has a different set of hardware in it, so each version takes a different firmware.
You can only load the firmware that corresponds to your model and version.

Presenter 8 video record fails to work with firewire camcorder

Tried to record with camcorder connected via firewire. Presenter video creator crashed. Poor results for a highly anticipated "upgrade". Problem with installed "Adobe-Pr-VC.exe" app. Wish that Adobe would test their products instead of having us doing their Quality Control. But, I guess this is what they would describe as being a "feature". Glad I'm finding all these problems during the "trial" period.

Hello Bill,
I reported a similar issue on August, 9 : "Presenter 8 crashes after connecting external Firewire cam"
("http://forums.adobe.com/message/4609394#4609394")
The lack of support for FireWire connections is making the product less usefull than I tought it would. We also record conferences and corporate training presentations, and recording the speaker with just a low quality webcam is not always the best option (limited options of framing, zooming, panning, tilting, following the speaker ... they are not always standing on the same spot ).
Being in the "trial" period still, I digitized and copied a pre-recorded videofile of a recent presentation on my PC and tried to synchronize it with the PowerPoint presentation, but then I found out that I need to split up my complete recording in as many individual pieces of video as the amount of slides the speaker presents. Presenter only allows to import and synchronize one videofile with one particular slide. This type of post-processing is time-consuming and inefficient.
I also can't ask the trainer to do his/her presentation in a classroom first before an audience, and then repeat the whole presentation again afterwards in front of his/her webcam to record it to make it available for people who couldn't attend the session.
That is why the connection of an external camera or recorder is a necessity. There is nothing as easy and efficient as having a camera at the back of the class or conference room, and synchronize the camera image with the PowerPoint slides in real-time, while the speaker is presenting the slides before an audience. We simply don't have the time to go through a time consuming post-processing cycle by cutting the recorded presentation into several individual videofiles and importing them into the individual slides, or asking the speaker to repeat the presentation for the 2nd time in front of a webcam. Time is Money.
I also found out that only presentations recorded in real-time with a webcam (via the RECORD button on the toolbar) gives me the possibility to upload the presentation to YouTube. When using the possibility to import a videofile to a slide via the Presenter toolbar (Video --> import), it only gives me the possibility to publish to My Computer (or network), to Adobe Connect or to a PDF-file. No YouTube publishing possibility here anymore.
Why not, Adobe ?
Company policy to only connect to the proprietary Adobe Connect platform?
That is a real pitty.
I really don't understand Adobe's policy to not support FireWire appliances in Presenter 8. This would open so many possibilities for the product.
FireWire support is nothing new for Adobe. I'm an Adobe Premiere user for more than a decade, I use Adobe Flash Media Live Encoder to stream training sessions, conferences, etc ... and all these products support FireWire without any problem.
Don't tell me that the Adobe team needs to start studying for months how to connect a FireWire camera or recorder to its Presenter 8 software.
I hope they will investigate how they can solve this flaw as quickly as possible.
In the meanwhile, I guess, I will let the trial period pass and might consider purchasing the product once this issue has been solved.
Regards,
Patrick ROTEN
CIPAL
Governmental ICT Agency
Dept Marketing & Strategy
(Belgium)

Video plays out of sync with Flash version 11.6.602.180 in Firefox

I've been receiving multiple reports that some videos plays out of sync with Vimeo's Flash player in Firefox, but not in other browsers (with the same version of Flash installed). Disabling/enabling hardware accelerated decoding does not seem to make a difference. Any ideas as to what might be causing this issue?

This could be multiple issues, but the first thing that comes to mind is the protected mode feature in Flash Player for Firefox. We've made significant improvements in our 11.7 beta and I'd recommend giving this a try:
3/19/2013 - Flash Player 11.7.700.146 Beta
If that doesn't help, or you can't update to the beta version, try the steps outlined in this post:
How do I troubleshoot Flash Player's protected mode for Firefox?
In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue.
Thanks,
Chris

Viewing video stream still drops connection with firmware 1.52.06

I have a BEFW11S4 (V.4) and installed a new firmware (1.52.06). I still lose internet connection after viewing a streaming video -- such as msn.com. I have viewed other postings on the internet and it appears that there are issues with Linksys firmware. Many say don't upgrade if you want to avoid the "streaming video bug." It appears that firmware 1.50.14 is the most stable. Unfortunately, the current firmware is 1.52.02. This is strange because a few months ago I downloaded the 1.52.06. Anyway, does anyone know where I can get the 1.50.14 version? I emailed Linksys tech support several times and the conclusion they gave me is that my router is defective. I don't believe this because the streaming video problem occurred right after I installed the 1.52.06 firmware, which strangely is unavailable on the website.
Thanks.
Ty

I tried using the methods to determine the correct MTU size as listed on the linksys site they didn't work for me.
Using the format, ping -f -l [MTU SIZE] yahoo.com ,worked but the result (adding 28 to that number) the linksys would not accept.
I finally just tried changing numbers then viewing a streaming video site. and found 1472 worked okay for me. using the current software 1.52.06

All RVS-4000's with firmware versions less than 1.3.2.0

Hi,
For those of you without the time to explore the Cisco site. I thought you guys might want to know about the following vulnerability. Which is fixed in the latest firmware version 1.3.2.0 for the RVS-4000:
Cisco Security Advisory: Cisco Small Business Video Surveillance Cameras and Cisco 4-Port Gigabit Security Routers Authentication Bypass Vulnerability
Document ID: 111641
Advisory ID: cisco-sa-20100421-vsc
http://www.cisco.com/warp/public/707/cisco-sa-20100421-vsc.shtml
Revision 1.1
Last Updated 2010 MAY 19 2030 UTC (GMT)
For Public Release 2010 APR 21 1600 UTC (GMT)
Software Versions and Fixes
To determine the software version running on a camera, administrators can click the "About" tab at the top-right of the device user interface. The software version information can be obtained on the System Status page under the "Status" tab.
The latest camera software can be downloaded at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414029 ( registered customers only) .
The software version of the RVS4000 is displayed on the main router page displayed after users log in.
The latest RVS4000 software can be downloaded at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=282413304 ( registered customers only) .
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Small Business Support Center or your contracted maintenance provider for assistance.
Product
First Fixed Version
PVC2300
1.1.2.6
WVC200
1.2.2.0
WVC210
1.1.0.15
WVC2300
1.1.2.6
RVS4000
1.3.2.0
Bruce

Yes, I posted this same information in the Video Surveillance section a few weeks ago. it was actually a Partner on the
community who found this and brought it to our attention and we fixed it.
Thanks for cross posting here, since you are right in it also effected this router.
And a big thank you for taking the time to collaborate some very useful information with the community. I have noticed your recent posts and I think they are well writen, helpful, and well organized. I also like your idea of turning some threads into solutions documents and resource labs perhaps.
If you would ever like to post something of that natire, you may also. Just creat a document with your findings.
Steve

Battery Update 1.4 does not update my battery with firmware version: 102a

Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
A quick Google search showed that plenty of other people are asking on the web about this version 102a firmware as well.
So, any idea what the deal is with batteries that have the firmware version 102a? I got this current battery under the recall program as the original one that came with my MacBook was one of the bad ones.
This whole MacBook battery business has been a nightmare. It's wasted hours of my time, and is a real black eye on what is otherwise a good computer experience.
Thanks in advance for any input.

Macophile wrote:
Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
I started thinking about it, and 102a is actually a larger number than 0110.
In any case, the updater was only meant for specific battery revisions.

Gray ! on 100 records when I sync with new version of iTunes 10.2.1.1

I have a Ipod classic 30g. I have 4079 songs in my iTunes. I am using Windows 7 on an ACER Extensa. I have my music on an external hard drive. The same place it has always been. Since I upgraded to the new version of iTunes when I sync my Ipod it randomly marks 100 records with the gray circle with a ! in it. Showing that it is not connected. I check the songs are still on the drive in the same location. I go into the control panel of my computer use the repair function and all the ! are gone. As soon as I try to sync iTunes selects 100 songs and does not sync them to my Ipod. After the first time I added more songs and there was no change to the number of songs not synced. Any suggestions?

I only have songs no other media. The specs for my Ipod say it should hold 7500 songs. This problem only started after upgrading to the newest version of iTunes 10.2.1.1

DDNS error on WRP400 with firmware version: 2.00.26

I have recently upgraded my WRP400 with the latest firmware (2.00.26) and found that the DDNS updating function with dyndns.org is stopped.
I made tests with the previous firmwares (2.00.20 and even with the old 1.01.00) and DDNS updating works with these older firmwares and stops immediately when the new 2.00.26 firmware is applied.
The reason why I need to upgrade to the latest fw, because I have the very annoying issue with the WRP400's stoppages. The release notes for the .26 firmware tells this is fixed now. btw, after the fw update it has stopped only once in 3 days...(!) but this is far better than the daily 2 or more stops...
I need the DDNS service, and I want a stop-free router at the same time. I know, our world is not that easy today, but please...

Hi Szabolcs,
I do have the same problem.
I do use more them 10 WRP400 devices, and I am still using fw 2.00.20 due to the DDNS problem.
WRP400 could be a very nice device, but it simply doesn't performs as it should. And in my opinion, the list of supported USB modems is simply to short.
I am already considering chaning from supplier and try to find a different and working solution in the market.
I also found out that the router, from time to time need to be reseted (it simply stops performing as it should). So, as there is no auto reset option, I need o use Plug In Timers to reset them once every day.
So, as you can see, I also would like to see a solution for this problem...

How to do video recording of the animation on screen?

Hi all,
I'm new to iphone packager and flash. Wonder is anybody know how to add the feature of video recording for the animation with sound on screen while the flash animation is playing? The idea is same as the famous iphone apps talking tom cat. Thank you in advance for your input.

Yeah adobe android is definitely stronger.
If you want to mess around and you have an android phone check out these videos.
Part 1: http://www.gotoandlearn.com/play.php?id=123
Part 2: http://www.gotoandlearn.com/play.php?id=124
Tim

About nokia 500 video recording resolution

I having nokia 500 with s/w version 111.021.0028 (belle refresh) all other features are good except video recording. It only support 640*352 with 15 fps which is very low. how to improve video recording resolution 640*352 with 25fps or 30fps whether there is any updates available or software available?

@devak89
Not sure whether paid for application such as this from Nokia Store compatible with your 500:http://store.ovi.com/content/101612
Happy to have helped forum with a Support Ratio = 42.5

5300: Problem with firmware upgrade

Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?

16-Mar-2008 09:50 AM
omensa wrote:
Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?
Get it updated at Nokia care. If the phone is in warrenty they do it free for you.
If my post has helped you please click the white star on the right

Is there a problem with firmware 4.30.5 for the WRT54G?

Hello experts,
I have read in this forum that there are problems with firmware version 4.20.5 for the WRT54G.
Is this so? And if so, where might one find the details?
Thanks.

There is now a new firmware update available for the AirportExtremeBase. I had a similar problem as all of you, so I hope this will fix the problem!
Download the update here: http://www.apple.com/support/downloads/airportextremefirmwareupdate57formacosx.h tml
PowerBook G4 - 1.67GHz Mac OS X (10.4.4)

Digital Video Recorder with Firewire 400 and new iMac

I just got a new iMac which has only 1 firewire800 and no firewire 400 ports. My digital video camcorder has a firewire 400 cable to transfer taped recordings to the computer (I want to import using iMovie 09). So, do I simply need to buy a new firewire 800 cable that will plug into my digital camcorder? The reason I'm hesitant is that I've tried using a USB connection, and iMovie 09 didn't open and doesn't recognize that the digital camcorder is connected when I use USB. Does iMovie 09 just no longer recognize my several year old Samsung digital camcorder, or does it just not recognize it with a USB connection, and it will be fine if I get a firewire 800 connection that fits the new iMac? Is there another type of converter--e.g., a cable that allows a firewire 400 to plug in on one end and has the firewire 800 connection on the other end?
Thanks

Thanks for the reply. I went ahead and got a new cable and now I can plug for digital video camcorder into my new Mac. Unfortunately, as I feared, the Mac still doesn't recognize the camcorder. I checked the system profiler with the camcorder plugged in, and under Firewire Bus it reads Unknown Device:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Unknown Device:
Manufacturer: 0xF0
Model: Unknown
GUID: 0xF000FFFFFFFF
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
Unknown Unit:
Unit Software Version: 0x10001
Unit Spec ID: 0xA02D
Am I just out of luck--the new mac just doesn't recognize my slightly out of date digital video recorder? Or should I be able to get a driver to make it work?

Recording Ppt presentation interspersed with video clips on DVD

I want to record a live presentation I make with Powerpoint slides interspersed with shots of me and video clips. Is this possible with iDVD version 7.0.4?

Welcome to the forums.
If you'd like all that to be integrated, you probably want to look into iMovie. In general, iDVD handles the output from iMovie and creates DVDs, but iMovie allows the producer (you) to cut between shots of ppt slides, you, video clips, etc. Here are several tutorials which may be of interest:
http://www.apple.com/findouthow/movies/imovie08.html
John

B/W video recording in N-93 with firmware version ...

Similar Messages

Maybe you are looking for