B110 losing wireless config when turned off

Hi guys
What am I doing wrong!?
I have configured my new B110 to talk with my home network. All goes well until I turn it off at the button. When I turn it back on again it has forgotten the configuration and needs to be set up again.
Help please...
Bill

Hi,
In order to resolve the issue, please follow the steps given below:
-          Make sure the printer is connected to the Network.
-          Print the network Configuration page. To do so: Press the Wireless Button or Select Setup on the printer display and then Scroll Down and select Wireless>>> Wireless Settings>>> Print Network Configuration page.
-          Make a note of the printer IP address and open the browser on the computer and type the IP address of the printer in the Address Bar and press Enter. This will open the Printer Page
-          In the Printer page, please click on Networking Tab and then click on Wireless (802.11) and then click on IPv4 configuration.
-          Then Select Manual IP and in the Manual IP address, please type the IP address of the printer.
-          Then type the Manual Subnet Mask 255.255.255.0.
-          Then enter the Manual Default Gateway address. (IP address of the router)
-          Then under the DNS Address configuration, Select Manual DNS Server and enter the Manual Preferred DNS Server address.
-          Then click on Apply.
To find the DNS address and the Gateway Address, please click on Start on the computer and then click on RUN. In the Run window type CMD and click on OK.
In the Command Prompt type IPCONFIG/ALL and press enter. This will display the Default Gateway address and the DNS Address. Please make a note of the it and enter it in the Printer page as mentioned above.
Then Shutdown the Router and then Shutdown the printer and then turn on the router and then turn on the printer. The next time you restart the printer if it prompts you to enter the wireless settings, select No or Cancel and then check.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Similar Messages

Losing app docs when turning off docs & data iCloud backup switch.

Will I lose the documents in my I annotate app if I turn off the docs & data switch in my iPad? I don't know if there is a difference between docs saved directly to the iPad vs saved through an app like I annotate witch is saved to the iPad or cloud. I CANNOT afford to lose these docs & data. However, I must back this up.

New question, I'm trying to do a software update, the iOS 7.1.2. I keep getting an error. What do I need to do? FYI, I cleared out my iCloud backup & I have 4.8 G of my 5 G iCloud storage. Don't know if that matters. Please help, thank you.
Jeremy
Sent from my iPhone

Solve X200s the wireless radio randomly turned off/disconnected

I had exactly an issue on my x200s. The wireless radio randomly turned off, and Window 7 was frozen, no response. It took me a lot of time to figure it out. Eventually, it worked out.
Please go to "Lenovo access connections", and find the "tools" tab. In the "global setting", uncheck "Allow the wireless lan radio to be turned off when inactive".
This is going to solve your problem. I worked for me.
Hope this help.

FWIW, I think the ThinkVantage software just sucks. On my X200 the wifi would drop constantly, every 3 to 5 minutes. Driver upgrade, software upgrade, settings etc didnt change anything. I wiped the entire hard drive and installed linux, and I haven't seen a drop since. Maybe try just using the windows wifi to manage your connections. It could also be related to the power management dropping the wifi, which would also be the ThinkVantage.

IPhone 5 will not be recognized by iTunes or charge while on but when turned off the iPhone will charge just fine but still won't sync with iTunes what should I do?

Was charging my iphone 5 for about an hour or so after charging unplugged and went to playing games phone was at 5% so I grabbed my cable and plugged it into the wall nothing happened tried three different chords and blocks and sockets afterwards I plugged my phone into the computer and it wouldn't charge or sync with iTunes it acted as if it wasn't even plugged in so I shut the phone off and though I'd give It a break and try again later. As I got ready to go to bed I though I'd try to plug it back in and see if anything happened nothing did so I just left it I went to mess with it this morning and come to find out it was at 100% I continued to mess with it and i came to the conclusion that it only charges when turned off. I can't get the phone to reset and would love to restore with iTunes if it would sync with iTunes I don't know what I need to do but really need my problem resolved since its a hassle to have to turn off my iphone in order to get it to charge

Is that a new iPhone? Bring it in to Apple for a replacement.
But do this first:
hold the Home Button and the Power Button at the same time, keep holding, ignore everything on the screen, keep holding until you see the white Apple logo appear, then let go and let it start up.
It should charge both when on and off, unless you connect throug a hub and there are current eaters also on the hub: connect directly to the usb port.

Should iphone 4 receive messages when turned off and display them when switched back on

should iphone 4 receive messages when turned off and display them when switched back on

It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
So generally speaking, a few minutes after you turn your iPhone on, your messages should display. Similarly, your voicemails would arrive.

When turn off wi-fi, macbook pro stop responding

installed maverics on my macbook pro 3,1. every time when turn off wi-fi manually, computer stop responding, it then has to be restarted by long press on the power botton.

Wanted the solution to work, but there's no option to Sync this iPod over Wi-Fi option on my Touch.
Settings > General > iTunes Wi-Fi Sync > Sync Now
No option to uncheck to opt out of automatic syncing. The auto syncing can only be stopped after it's started.
Solution found by searching the web:
iTunes menu > Preferences > Devices > Prevent iPods, iPhones, and iPads from syncing automatically.

Charging iPhone 3Gs when turned off.

I have had my iPhone 2 days and I have realised that it does not charge when turned off. If I turn the phone off and insert the wire (wall plug or USB on computer) the phone automatically turns on and when I turn it off it doesn't charge. Has anyone got any suggestions as to why this happens or any ways to fix it. I'm new to Apple products so I would much appreciate anyones help!
Thank you!

If you plug it in while on, then turn it off, it should charge just fine (although you will have no indication it is charging, since it is off).
If you turn it off and THEN plug it in, it will start up. That's just the way it is.

HT202774 Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions?

Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions for the native player?

Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus

How do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

how do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

You didn't say which model of iPod Nano that you have, but generally there should be a lock setting, that can be turned on or off, to prevent accidental changes in settings. And, there is also a setting to turn on or off a feature called, "Shake to Shuffle." It allows you to change songs by just shaking the iPod.

After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours it is driving me crazy as I had to stop all apps but still not helping

After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP

Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
and http://www.apple.com/support/ipod/service/battery/

HT1688 Has anyone experienced the 3GS phone exploding when turned off?

Has anyone experienced the 3GS phone exploding when turned off and not in use after a period of time? Is so, what did you do to get it replaced?

I haven't, but thanks for asking.
Bring your phone to Apple for replacement. If you're in the warranty period, the replacement will be free; if not you will pay $149.

Satellite P855-10G runs out of battery even when turned off

Hi everyone,
I have bought the Toshiba Satellite P855-10G, but im terrified because he runs out of battery even when turned off..
Anyone knows how can i solve the issue?
Best regards,
Igor Tarelho

Hi
Access the BIOS and turn OFF the options like: Waking up on LAN and Keyboard.
In Toshiba HW Setup I recommend disabling the USB Sleep and Charge function as well
Both enabled options might allow discharging the battery even if the unit is OFF

Ipod nano 6 gen hangs when turning off the backlight. That is, it doesn't respond to button presses on the touch screen.

ipod nano 6 gen hangs when turning off the backlight. That is, it does not respond to button presses on the touch screen. He also has just a white screen instead of the desktop display. Tried to rearrange the screen from another Ipod nano, but nothing came of it - all the same ... What should I do?

Hi Rc_Drifter,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod nano. Restoring the device may resolve the backlight issue as well.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I hope this information helps ....
- Judy

My 3g is stuck on a screen that only allows emergency calls, wont conect to itunes, doesnt change when turned off or plugged in, any ideas how to fix it?

my 3g fell in toilet thursday, dried out and worked yesterday, now its stuck on a screen that says emergency call. wont connect to itunes, doesnt change when turned off or plugged in, any ideas

If you are eligible for a discounted upgrade through your carrier, this would be a great time to consider it. The phone is most probably permanently damaged.

My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

B110 losing wireless config when turned off

Similar Messages

Maybe you are looking for