B110a Trying to enable the Web Services Error message received

I am trying enabled the Web Services but I get the Error Message 'There was a problem connecting to the Server"
I get the same when I try to update the firmware but the printer is connect to a wireless network with internet connection and no firewall.

Hi Confused_Techie, Hope you are doing well and having a great day;
I will first try using the Network diagnostic utility.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/n...
Hope this can identify and solve the issue for you.
If not than please include the operating system you are using and the build of the Operating system i.e. Win 7 sp1 64 bits. As well as router you are using. Also please take the time to add as much information that you may consider relevant. This will give you a better chance of getting an answer from not just me but other member of the community as well.
Cheers;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

Help! Getting "Connection error Check connection" when trying to enable HP Web Services on M1536DNF

Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.

Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I downloaded my CSDesignWebPremium and when I tried to mount the disk--an error message said "DesignWebPremium,_CS6_LS16.dmg" not recognized

I downloaded my CSDesignWebPremium and when I tried to mount the disk--an error message said "DesignWebPremium,_CS6_LS16.dmg" not recognized
(I am using a MAC 2.6 GHz Intel Core i7 (16GB 1600 MHz DDR3) OSX 10.7.5)

Squasha9 it would appear that the DMG you downloaded is corrupted. Where did you download the installation files from? You can download a copy of the installation files from Download CS6 products.

Modidy the Web Dispatcher Error message

Hi,
Where do we modify the web dispatcher error message "500 Dispatching error" to a cutome message on the J2EE?
Thank you.

note says:
Customization of 500 Internal Server Error
This response code is returned when there is a problem with the application or the server. Any not handled Exception or Error triggers the return of response with code 500.
To return different content on error occurance, you need to handle the error by inserting the appropriate declaration in web.xml.
Sample declaration for handling of test.MyApplicationException occurances in the application scope:
<error-page>
    <exception-type>test.MyApplicationException< /exception-type>
    <location>/customerrors/MyApplicationException.jsp</location>
</error-page>
           Note1: For each error condition you need to handle (application exception use a separate error page. For all other exceptions use a global error handling definition for java.lang.Throwable.
However you must be aware of the following:
In case java.lang.OutOfMemoryError appears the subsequent behaviour of the JVM is undefined and this may lead to unpredicatable effects. Therefore the webcontainer will not pass such error to the error page for handling.
If the following general definition
<error-page>
    <exception-type>java.lang.Throwable< /exception-type>
    <location>/customerrors/WhateverProblem.jsp</location>
</error-page>
is in place, then the error handler resource is responsible for logging the error condition.
This means the resource handling general problems if such is declared must be dynamic (a JSP page or a servlet not HTML page)
           Note2: Exceptions are searched in order of appearance in web. xml and not determining closest in class hierarchy.
           This is true for all patchlevels of J2EE Engine 6.20 and versions of J2EE Engine 6.40 lower than SP11.
Therefore if test.ChildException extends test.ParentException extends java.lang.Exception and
<error-page>
   <exception-type>test.ParentException</exception-type>
<location>/customerrors/ParentException.jsp</location>
</error-page>
<error-page>
<exception-type>test.ChildException</exception-type>
<location>/customerrors/ChildException.jsp</location>
</error-page>
is specified in the web.xml of the application as exceptions are searched in order of appearance regardless if ChildException or ParentException is thrown, the call will be directed to /Customerrors/ParentException.jsp because ChildException is a subclass of ParentException..
Working mapping would be :
<error-page>
<exception-type>test.ChildException</exception-type>
<location>/customerrors/ChildException.jsp</location>
</error-page>
<error-page>
<exception-type>test.ParentException</exception-type>
<location>/customerrors/ParentException.jsp</location>
</error-page>
so you need to switch the declarations in the web.xml (effective on next start of the application).
BR, Oliver

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

Hi Aloolaab,
I understand that you're trying to enable web services on your printer. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.

Is it possible to enable the Web Services for eprint on the CP1025nw

I am using the HP Laserjet CP1025nw
It is connected to a wired network with a fixed IP address.
I am using Windows 7 64bit
When I click enable to complete the Web Services setup - it fails telling me to check the internet connection.
The internet is working fine and all other aspects of the printer are working so how do I complete this setup??
Any suggestions please?
Thanks John
This question was solved.
View Solution.

Hi John,
I suggest starting over and following the instructions.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Web service error message ' Invalid Response Code: (403) Forbidden'

Hi Experts,
I created a webservice, and it working fine in Development and Quality systems. But it is not working in Production system. When trying to click on 'Open Web Service navigator for selected binding' for testing it's giving the following error message.
Cannot download WSDL from http://na00stgerp01.systems.corbis.net:8003/sap/bc/srt/wsdl/bndg_DFCA9B84C8D5A7F1A013001C23C37FBD/wsdl11/allinone/standard/document?sap-client=120: Invalid Response Code: (403) Forbidden. The requested URL was:"http://na00stgerp01.systems.corbis.net:8003/sap/bc/srt/wsdl/bndg_DFCA9B84C8D5A7F1A013001C23C37FBD/wsdl11/allinone/standard/document?sap-client=120"
Please suggest me any solution.
Thanks
Lakshminarayana

Hi Lakshminarayana,
there may be lots of reasons.
[http://lmgtfy.com/?q=http%20%2B%20403]
Regards, Hubert

Unable to connect to Web Services error message

I have read through the thread here and it seems like this has been a common issue -- but the final resolution seems to have been solved with a private message...I try to scan and send via email -- everything has been set up properly (and this, in fact, used to work -- but has suddenly stopped) -- I have tried rebooting everything -- and I definitely have a good connection to the internet -- but when I try to scan and send to email, get the error message "cannot connect to web services."Any idea what's going on and how to resolve the problem?

Hello skagitsusan,
Welcome to the HP Support Forums!
I am not 100% as to the steps you have tried in attempt to resolve the Scan to Email issue on the 7520, but I would like to offer the steps I have given in another Thread.
Re: Trouble scanning using Photosmart 6520 <---
The steps will cover your printer, even though they are different Photosmarts.
Let me know if this works.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Unable to start debugging on the web server error message when running asp

Hi Mark,
i want to apply a asp web application on your book at page 336/337
I am using .NET 2005 pro. edition.But if i run(play button) the asp web site
it gives above error message which i wrote on the subject.
Could someone help me?
Thanks for reading..
Regards..
S.K

You may want to check whether your Web application has been configured to use "Integrated Windows Authentication".
Go to your IIS, check the Properties of your web application under Web Sites\Default Web Site, select "Directory Security" tab, click the first "Edit..." button (for Anonymous access and authentication control). At the very bottom, make sure "Integrated Windows authentication" is checked.
Re-start your Web application.
Message was edited by:
shsu

Web Services error message ! !??

Hello,
I try to use a .NET WS with XI 3.0 SP16.
When I try this WS with IE or XMLSpy all work fine.
I configure the URL, the Action, and a user authentication with domain suffix : [email protected]
With XI I receive an error message :
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anybody know how to solve this issue ?
Thanks
Regards,
Chris

Dear collegues,
i am trying to invoke Ws using SOAP Adapter,
i configured the user authentification & proxy also.
still i get this error
<b>sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</b>
i searched the forums some one suggested to change the content type to text/xml,
where & how to do this.
Regards
chandra

Enable WSRM (Web Service Reliable Messaging) in sap system

Hi All,
Can any one provide document to enable wsrm in sap pi system.
your help is much appreciated
Thanks,
Narendar.

Hi,
Please check below link it will help you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/107256c4-d4c4-2d10-fca1-d1676081892b?QuickLink=index&…
Best Regards,
Atul

M251n can't enable hp web services

I just got an M251n printer and I have been trying to set up the wireless for hours going through all the support suggestions and none have worked. When trying to enable the Web Services Setup I get a message of "Connection error. Check internet connection." The connection is fine and working and the printer is connected online via ethernet and my computer is connected to the printer by USB.
I am using a Mac and have downloaded the latest driver for the printer. One support suggestion stated that I might have outdated firmware but I can't find any firmware updates for this printer.
I am not sure what is wrong. It's not straight forward and without the wireless function working I will have to take this printer back and buy a different brand.
Any suggestions are welcomed.
This question was solved.
View Solution.

Hello neilthedirector,
Welcome to the HP Support Forums!
I see that the HP LaserJet Pro 200 color Printer M251n will not allow you to enable the Web Services. I was able to locate a firmware update utility that you can check the printer with, if you are using Mac OS X 10.5 - 10.8.
HP LaserJet Pro Series Firmware Update Utility<---
If the update is not present, or fails to resolve the issue, try applying a manual I.P address and DNS. To do this;
Enter the printer's I.P into the address bar in Safari.
Click Networking, then IPv4 Configuration.
Set the IP Preferred Address Method to Manual.
Increase the last set of numbers by 50.
Subnet Mask should be 255.255.255.0.
Default Gateway will be your router's I.P address.
Click Network Identification on the left.
Under DNS Primary (IPv4) enter 209.244.0.3 and for Secondary (IPv4) enter 209.244.0.4.
Click Apply and then power the printer off and then on.
Try now to enable the Web Services.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Error during invoking the web service

hi,
i am using axis 1.2.1 & tomcat-5.0.28
when i am trying to invoke the web service i am getting the error.
i am passing all the parameters..then also it is giving the error.i have used the wsdl file to generate the stubs (using wsdl2java tool).the web service is in remote system.
anybody knows Please let me know the soln.
thanks in advance
the error:
Exception in thread "main" AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client
faultSubcode:
faultString: JAXRPCTIE01: caught exception while handling request: deserialization error: java.lang.NumberFormatException: For input string: ""
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:JAXRPCTIE01: caught exception while handling request: deserialization error: java.lang.NumberFormatException: For input string: ""

1. Does your network have a proxy ? - if so, configure the proxy details in the SOAP adapter.
2. Does the WS expect any credentials? - if so configure the same in the adapter.
More: /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

SAP Web Service error text : The database returned a value containing an error , type CX_SY_OPEN_SQL_DB

Hello Guru's,
we are creating sales order in SAP from a quote created in .NET, through Web Service created in SAP, and consumed in .NET.
When ever a order is created in SAP for a given quote, SAP returns the sales order number to .NET.
Orders are getting created as expected, but once in a while we are getting the following error from webservice :
Web service processing error; more details in the web service error log on provider side (UTC timestamp 20140609173429; Transaction ID 4DFCEFE33301F1EBB5CE00155D0B4530)
But the problem is order is getting created in SAP for the perticular quote for which we are getting the above error and this order number is not getting returned to .NET.
Upon analysis in TCODE SRT_UTIL for the above transaction ID, has the following details , which are hardly help full to resolve the error.
----TYPE                                  CX_SY_OPEN_SQL_DB
----ERROR_TEXT                   The database returned a value containing an error
----CX_SY_NO_HANDLER
-----CLASSNAME                     CX_SY_OPEN_SQL_DB
This Exception raised by Web Service application
Could you please help in resolving this issue or alteast provide an approach for the same.
Thank you,
Suresh.

Thank you Bhaskar,
How can we clarify whether the error is from SAP or Web part.
I have checked ST22, but there is not entry for the perticular exception transaction ID
My exception time stamp is
-------------------START-------------6/9/2014 1:34:33 PM
Error :Web service processing error; more details in the web service error log on provider side (UTC timestamp 20140609173429; Transaction ID 4DFCEFE33301F1EBB5CE00155D0B4530)
-------------------END-------------6/9/2014 1:34:33 PM
In al11, i found the following for the perticular exception time stamp
**** Trace file opened at 20140609 133431 Eastern Daylight Time, by disp+work
**** Versions SAP-REL 720,0,500 RFC-VER U 3 1442251 MT-SL
XRFC> Begin of user trace
XRFC> ---------------------------------------------------------------------
XRFC>                                                                     <
XRFC> TRACE SOAP RUNTIME - header                                         <
XRFC>                                                                     <
XRFC> ------------------------------------------------------------------ <
XRFC> REQ_SIZE   : 2685                                                   <
XRFC> RESP_SIZE : 0                                                      <
XRFC> PARENT_ID : ROOT_CALL_ID                                           <
XRFC> TRC_KEY    : 40FCEFE3BD6EF184B5CE00155D0B4530                       <
XRFC> REQ_BASED :                                                        <
XRFC> SESSION_ID : 0003925540FCEFE3BD6EF17DB5CE00155D0B4530               <
XRFC> TS_CALL    : 20140609173408.2880000                                 <
XRFC> SY_UNAME   :                                            <
XRFC> HOSTNAME   :                                              <
XRFC> SY_SID     : PRD                                                    <
XRFC> SY_MANDT   : 300                                                    <
XRFC> SYS_NR     : 19                                                     <
XRFC> APPLSERVER :                                      <
XRFC> ISPRESCHED : X                                                      <
XRFC> DURATION   : 21810                                                  <
XRFC> NETHDRTIME : 21810                                                  <
XRFC> CALL_STATE : 2                                                      <
XRFC> ERRORTYPE : APPLFAIL                                               <
XRFC> ERRORAREA : APPL                                                   <
XRFC> CTXDP_TYPE : SOAP_RUNTIME                                           <
XRFC> SYNC_ASYNC : S                                                      <
XRFC> LOCATION   : P                                                      <
XRFC> DIRECTION : I                                                      <
XRFC> REQ_ID     : 91C57815916E421CA9F3D652FFACE9C7                       <
XRFC> RESP_ID    : 00155D0B45301EE3BBFF89A0267EB5CE                       <
XRFC> MSG_STATE : 114                                                    <
XRFC> IF_NAME_I : ZSD_CS_CREATE_SALESORDER_SERVI                         <
XRFC> IF_NS_E    : urn:sap-com:document:sap:soap:functions:mc-style       <
XRFC> IF_NAME_E : ZSD_CS_CREATE_SALESORDER_SERVI                         <
XRFC> ISSHORTCUT :                                                        <
XRFC> TRC_PATT   : WSTEST                                                 <
XRFC> TRC_SSID   : PRD_19                                                 <
XRFC> TRC_USER   :                                           <
XRFC> TRC_TS     : 20140609173409                                         <
XRFC> TRC_COUNT : 99                                                     <
XRFC> TRC_EXT    :                                                        <
XRFC> COMPLETE   : OK                                                     <
XRFC> CALLEDPROG : ZSD_CS_CREATE_SALESORDER_SERVI                         <
XRFC> SOAP_APPLI : urn:sap-com:soap:runtime:application:rfc:710           <
XRFC> CONF_ID    : 00155D0B45301EE3AEFDAD78756555CE                       <
XRFC> BIND_ID    : 00155D0B45301EE3AEFDAD787565B5CE                       <
XRFC> OP_NAME    : ZsdCsCreateSalesorder                                  <
XRFC> COMM_PATRN : Method:ZsdCsCreateSalesorder                           <
XRFC> OP_NS      : urn:sap-com:document:sap:soap:functions:mc-style       <
XRFC> REMADDRESS : 172.16.11.43                                           <
XRFC> DT_OBJ     : ZSD_CS_CREATE_SALESORDER_SERVI                         <
XRFC> MEMCONSUMP : 296291                                                 <
XRFC> WSHOST     :                                                        <
XRFC> WSPORT     :                                                        <
XRFC> WSPROT     :                                                        <
XRFC> WSCLIENT   :                                                        <
XRFC> WSPATH     :                                                        <
XRFC> PXYHOST    :                                                        <
XRFC> PXYPORT    :                                                        <
XRFC> USEDRFCDES :                                                        <
XRFC> BONAME     :                                                        <
XRFC> PROCCOMP   :                                                        <
XRFC> DEPLOYUNIT :                                                        <
XRFC> ------------------------------------------------------------------ <
XRFC>                                                                     <
XRFC> TRACE SOAP RUNTIME - trace records                                  <
XRFC>                                                                     <
XRFC> ------------------------------------------------------------------ <
XRFC> E SOAP_RUNTIME 20140609173429.7400000 : CL_SOAP_RUNTIME_SERVER      <
XRFC> ->EXECUTE_PROCESSING Exception handling for IF "ZSD_CS_CREATE       <
XRFC> _SALESORDER_SERVI" OP name "ZsdCsCreateSalesorder" MSG ID           <
XRFC> "91C57815916E421CA9F3D652FFACE9C7" user "STULZWEBSERV"              <
XRFC>                                                                     <
XRFC>                                                                     <
XRFC> E SOAP_RUNTIME 20140609173429.7240000 : CL_SOAP_RUNTIME_SERVER      <
XRFC> ->EXECUTE_PROCESSING CX_SOAP_ROOT : An exception has occurred. |    <
XRFC> program: CL_SOAP_RUNTIME_ROOT==========CP include: CL_SOAP          <
XRFC> _RUNTIME_ROOT==========CM004 line: 120                              <
XRFC>                                                                     <
XRFC>                                                                     <
XRFC> E SOAP_RUNTIME 20140609173429.7400000 : CL_SOAP_RUNTIME_SERVER      <
XRFC> ->EXECUTE_PROCESSING CX_SY_NO_HANDLER : An exception with the type <
XRFC> CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor    <
XRFC> declared in a RAISING clause | program: SAPLSTXD include: LSTXDFDB <
XRFC> line: 200                                                           <
XRFC>                                                                     <
XRFC>                                                                     <
XRFC> E SOAP_RUNTIME 20140609173429.7400000 : CL_SOAP_RUNTIME_SERVER      <
XRFC> ->EXECUTE_PROCESSING CX_SY_OPEN_SQL_DB : The database returned a    <
XRFC> value containing an error | program: SAPLSTXD include: LSTXDFDB     <
XRFC> line: 227                                                           <
XRFC>                                                                     <
XRFC> ---------------------------------------------------------------------
XRFC> End of user trace

B110a Trying to enable the Web Services Error message received

Similar Messages

Maybe you are looking for