B1BC BR02 SP01 e 2007B PL09 , continuar sem fazer a replicação do item e PN

Paulo,
1. Uma vez que está utilizando o 2007B, poderia confirmar que tem o
PL08 que é o patch supportado para essa versão. ESTOU COM O PL09
2. Você esta utilizand o B1BC SP01? SIM
3. Vejo na impressão de tela 'Replicaçao Fonte Castro5.JPG' que o B1
Company nome tem espaços. Verifiqe que o manual é claro quanto a não
utilização de espaços nesse campo OK IREI FAZER A CORREÇÃO
4. No MessageLog você tem alguma mensagem de erro? NAO
5. Você introduziu os dados na Matriz e depois restaurou essa base
como filiais? SIM,DE ACORDO COM ORIENTAÇÃO DO CARLOS HERNANDEZ
6. Tendo o 2007B você removeu o B1i que vem de raiz com o SAP B1 e
depois reinstalou o Add-on e o B1i que vem com o B1BC? REMOVIU DOS BANCOS O A VERSAO DO B1BC 2.7 E DEPOIS INSTALEI A VERSAO 2.9, QUANDO VC FALA B1i É O USUARIO, ELIMINEI O USUARIO, QDO INSTALEI ELE CRIOU O B1i1.REFIZ OS BANCO DO ZERO E FIZ A INSTALAÇÃO O USUARIO B1i FOI CRIADO AUTOMATICAMENTE.
GOSTARIA DE SABER , COMO DEVO CONFIGURAR O B1I DENTRO DO SAP TABELA QUE TEM NO TREINAMENTO PARA O 2005B , LOCALHOST - 8080 - SA -SENHA DO SA, É ASSIM? OU TEM ALGUNHA MUDANÇA SAP 2007B B1BC SP01?
Apesar de ter feito todas as correções utilizado o copy express em todos os bancos , ainda continuo sem replicar o item e PN, o que devo fazer mais para que seja replicada.

Paulo,
Fiz com as filiais sem nada(dados), e não replicou, creio que o problema seja referente ao endereço do Messagelog, pois qdo abrir o caminho Http:
localhost:8080Messagelog , não aparece se existe erro ou que fez com sucesso, fiz a instalação na minha maquina e este caminho aparecia com os eventos, onde é criada esta tabela? e em que momento, creio que seja isto.
Quais os bancos que preciso ter ou criar para a utilização do B1BC, sei que a landscape é criada no momento da instalação, é necessaria algum outra, pois na versão antiga solicita a criação de um banco Event.
Estou fazendo novamente a instalação do B1BC, para ver se foi algo no momento da instalação.
Jaqueline Martins

Similar Messages

SEM-BPS How to retract Revenue item ,NPV, Pay back Period ,IRR in IM(ECC)

Hi ,
I appreciate if someone guide me on how to retract from BPS planning layout , revenue items ,Pay back period , NPV, IRR into Investment Management (ECC). I am able to post investment cost and overhead cost ,but stuck with all above items .
Thanks in advance,
Thanks & Regards,
Rajiv Jain

Hi ALL,,
you can only
push back planned (investment and overhead) costs; the retraction of
revenues, NPV, payback period etc. is n o t supported at all.
As a workaround maybe you can somehow read the values to be pushed back
in the SEM system via customer owned program in SEM and then use the
corresponding BAPI function modules to update appropriation requests in
ERP via RFC call of these BAPIs: Please use
- function module BAPI_APPREQUEST_SETPLANVALUES
   to update (plan or) revenue values
- function module BAPI_APPREQUEST_CHANGEVARIANT
   to update profitability analysis values (NPV, payback period ... ).
Thanks & Regards,
Rajiv Jain

NF-e 10.0 Inbound - Processo de Subcontratação sem Cod. Material de Produto

Boa noite,
Estou implantando o processo de Subcontratação com 1 NF (SUBCON1A), mas aqui no cliente a RC é gerada pela Ordem de Produção sem Código de Material para o Produto, apenas o Componente possui código de Material. No step de Atribuição do Pedido de Compra / Item eu consigo atribuir o Produto ao Item Principal do xml, mas o componente não aparece para ser atribuído ao Retorno simbólico do XML. Parece que o GRC não reconhece a atribuição do item do Ped.Compra sem código de material ao Item principal e não traz o componente do PC para ser atribuído.
Saberiam me dizer se o código do material do produto no Ped.Compra é obrigatorio para o processo de subcontratação no GRC ?
Vejam as imagens abaixo :
Note que o Main Item não possui código de Material. E a mensagem na parte de Avaliable PO Items é para atribuir primeiro o Item Principal como se o GRC não reconhecesse oa atribuição ao item pricinpal ja realizada anterormente.
O pior é que o GRC não exibe mensagem de erro quando gravo a atribuição, apenas não exibe o componente do Ped.Compra impedindo a atribuição e a continuidade do processo.
Vcs ja passaram por essasituação ?
ë possível realizar a subcontratação com esse cenário ?
Obrigado

Oi Ramon
A solução funciona sim quando você não tem código de material do item pai. O que você precisa ter é o número e linha do pedido de compra na linha do item pai e dos componentes. Além do registro info de subcontratação dos componentes com o código de material do seu fornecedor.
Abraço
Eduardo Chagas

A tela da Configuração do Grupo de item aparece fora da tela de acesso

Grupo,
Gostaria de ajuda, o servidor do meu cliente caiu e estava usando o cadastramento do grupo de item, agora quando tento abrir ele pararece no alto sem poder ser inserido os cadastros, já tentei de todas as formas baixar a tela mais não tive sucesso, e não tem como inserir novos grupos nen ver ,estou usando o B1BC SP001 BR 02 SAP 2007B PL09.
Jaqueline Martins

Oi Jaqueline
Tente no SAP Business One menu -> "Janela" -> "Cascata".
Depois disso deve ter as janelas mais ao centro e com possibilidade aceder aos campos.
Paulo Calado
SAP Business One Forums Team

Sap b1 setup failed on Windows Vista -Home edition

Hi experts,
I installed SQL-2005 on windows vista home edition and also installed SAP B1-2007B-PL09 but it shows error connection with License server failed and SAP B1 service manager-License Manager 2007 are also disable .so my question is it SAP b1 support Windows vista-home edition.pl suggest me solution.
Regards,
Sudhir pawar

Sudhir,
Windows Vista home edition is not a supported Operating system.
That being said, the reason that your license manager is not enabled is more than likely not due to this fact.
Close the server tools, and relaunch but this time right-click and 'run as administrator' this should enable all the options and allow the license server to start.
You may also want to view the system requirements PDF available in the SAP B1 document resource center, this should give you some insight into supported platforms.
I hope this helps,
Lucas

Problem in Customer Balance

HI To All,
I am using sap b1 2007b pl09 .i face one problem . i see customer balance through customer master.it shows on figure on debit and credit side on opening balance column but opening balance is 0.what is login of the figure appeared on debit and credit column if customer have some balance.
regards,
vishal

Hi,
i told u produre go to customer master (2007b pl09) click on account balance but cofirm that customer have some some transaction if we open customer statement then remove tick on unreconsiled transaction .then see that in opening balance row in debit and credit column it shows some value in following transaction i think it shows last unreconsiled transation but what is login of that
Regards,
Vishal

AddOn Installation Failed On Terminal Server

Hello All,
I have created a addon in SAP B1 2007 B and when i am trying to installed the addon on the Windows 2008 Terminal Server
so that the client can log on to the AddOn through terminal server .But the addon is not getting installed and throwing an
error " AddOn Installation Failed " and "Failed to Initialised the AddOn".
Thanks & Regards
Amit

Amit,
Are you logged on as Administrator on the Terminal Server and are you installing the add-on? Windows Server 2008 is supported as of 2007B PL09. Are you at least at this PL level?
Eddy

Sales Analysis Report - Items -- blank result

Hi,
I'm testing a setup and running the sales analysis report. It works for the Customer version but I get no results when running on Items.
I'm on SBO 2007A SP01 PL07. There are open and closed invoices for inventory items; no credit memos have been posted. All Item type invoices.
When I run by Customer, I get the correct data - open and closed invoices for that customer.
When I run by Items, I get no results. The date range is the same for both reports.
When I run the purchase analysis on Items, I get data for the same items I am trying to see in the sales analysis.
Any ideas what could be causing this?
Thank you,
Heather

HI Gordon,
I left the default settings:
- Annual Report, Invoices, Individual Display, No Totals
- Posting Date: whole fiscal year
- Main selection: left blank/default (group = all, no properties)
I have double/triple/quadruple-check even the Secondary SElection to make sure there's nothing there.
I have also run it on Due Date instead of Posting Date, still no results (if run on Items).
As I mentioned, the selection criteria is what I want but for some reason that one version, Items, does not work. The other 2 tabs work with the same selection.
Heather

Upload XML Notas de Entrada

Boa tarde!
Gostaria de saber se há algum mecanismo disponível onde eu consiga efetuar o processo do MIRO e escrituração fiscal (J1B3N), atraves do upload do XML da Nota Fiscal de entrada, ou seja automatizar o processo.
Obrigada,
Thaís

THais,
você usa a solução SAP NF-e(GRC)?
se sim, o processo NOrmal Purchasing não te atende? Você quer apenas efetuar a escrituração sem fazer a MIGO/Inbound Delivery?
o Que você pode fazer no SAP NFE é implementar o processo FLEX.
AÍ você pode fazer a escrituração e a MIRO da forma que lhe convém.
[]'s
JN

Purchasing - A/P Transaction Processing for Services and Non Inventory Item

On of the main areas of concern that businesses have is in the area of Purchasing, Goods Receipts and AP Invoices Processing - There is a requirement that businesses have widely referred to as 3-way matching.
While SAP Business One has this functionality covered quiet well via the following, there is still some need for enhancements so that the application can correctly reflect the AP Accruals:
- Purchase Order processing with Approval Process (if configured)
- Ability to perform Goods Receipts for Services.
- Matching of AP Invoices to Goods Receipts with AP Invoice Approval Process (if configured)
The above transactions serve the 3-way matching quiet well for all purchases however when it comes to accuring for Services that have been provided, the application does not do this. The Goods Receipt transaction processing to acknowledge the service delivery is allowed however the related posting to the allocation account is missing.
The process that is followed by the application is same for Items that have not Inventory Items in Item Master.
As a result of the above, the business have to manually work out what the Accurals for services provided but not invoiced should be.
With little enhancement to the product this shortfall could very easily be overcome.

Hi,
Once there are transactions, we cannot make existing Inventory type item to Non Inventory type item.
Check SAP note:937297 which states as follows :
Symptom
Changing the status of the Inventory Item checkbox (in Item Master Data) for items with inventory transactions and documents, might lead to inaccuracies in the calculations of inventory value.
Other terms
Inventory Item, Non-inventory Item, Item Master Data, Continuous Stock, Perpetual Inventory, Inventory Valuation, 2004, 2005, 2005 A SP01
Reason and Prerequisites
Consulting Note
Solution
The status of an item (Inventory Item/Non-Inventory item as selected in the Inventory Item checkbox in the Item Master Data window), cannot be changed once an A/P, A/R, or Inventory document is posted for the item.
Regards,
Jitin Chawla

Batch No. in AP Invoice PLD

Hi all,
How to retrieve Batch No. in AP Invoice PLD in SAP 2007B.
I want to print batch no. regarding item in repetative area.
when selecting batch no. from OIBT table ,it is showing multiple rows ,also retreiving the previous batch no. of that particular item.
How to retreive the batch no.??
Regards,
Neetu

i want to print batch no. regarding item code in a/p invoice pld.
when in invoice pld i m picking the batch no,from oibt.batchnum ,it is picking multiple enteries it is also showing the previous batch nos created against that particulra item.
how to retreive batch no. on a/p[ invoice pld.
admin-> System Initilizaiton -> Print Preferences - > Per Document tab, 'When Batch/Serial No. Exist, Print' here 'When Batch/Serial No. Exist, Print' is selected
regards,
neetu

Order cancellation problem

Hi Frnds,
When i am trying to cancel the Order confirmation (CO13 Tcode ) i am getting an error as :
Deficit of BA Unrestr. prev. 57.000 M : ELF-WJ-40MM-SP01 3100 440 0000015183
But i have the stock of this item in plant 3100 and 440 Sloc . I have a stock of 2500 M with the same batch.
But why i am getting this error and why is it not allowing me to cancel the order .
Regards
Rakesh

Hi,
Please check that at the posting date of the cancellation entry the stock was there or not.The system refers to the same posting date on which the confirmation was done.Please check that at the same date the stock was there.
Also check the current stock status like if it is blocked or in restricked use.
regards,
kaushik.

FMS IN ROW LEVEL

Hi All
Working on SAP 2007B PL17
I reuired Foreign name filled from the item master to appear in the Row level of the Purchase order.
I am using below querry but not getting the result
SELECT $[oitm.frgnname]
Please Suggest
Ashish Gupte

Hi Pankaj ,
I am getting following error when i had run your Querry
[Microsoft][SQL Native Client][SQL Server]Cannot convert a char value to money. The char value has incorrect syntax.
'Service Contracts' (OCTR)
Ashish Gupte

Assignment of components to operations using LSMW

Hi
i created routing using LSMW.
i created all the operations using direct nput methode
and material to group assignmebt using batch input methode.
but i was not able to assign my components of the BOM to my routnig operations.
How to do this.
which one is the best and easy way. direct or batch input methode.

Dear,
Now I am clear.
You need to create different 2 BOM and with BOM items, as below,
example - total requirement of material A is say 10.
Semi finished Product- X BOM
BOM item 1 - material A-qty 8
BOM item 2 - material B-qty -5
Finished material Y - BOM
BOM item 1 - semifished material X-qty 10
BOM item 2 - material C-qty 10
BOM item 3 - material A-qty 2
BOM item 4 - material D-qty -2
You need to create above 2 BOM's if you want to see semifished product into inventory, if not proceed as below
Finished material Y - BOM
BOM item 1 - material A-qty 8 assign it to routing operation 10
BOM item 2 - material B-qty -5 assign it to routing operation 10
BOM item 2 - material C-qty 10 assign it to routing operation 20
BOM item 3 - material A-qty 2 assign it to routing operation 30
BOM item 4 - material D-qty -2 assign it to routing operation 30
I think this is the only way you can map it.

Meu iphone travou

Depois que meu iphone atualizou para versão 8.1.2 ele travou a parte de ligação,contatos,ve chamadas.. Ta muito difícil de mecher,eu ja redefinir as configurações mais nada adiantou..o que devo fazer

Boas
Tenta o ligar ao itunes e formatar de novo, mas faz uma instalação de raiz , sem fazer backup

B1BC BR02 SP01 e 2007B PL09 , continuar sem fazer a replicação do item e PN

Similar Messages

Maybe you are looking for