B1DE For VS 2008

Hi,
Am Currently working with VS 2008 to Create Add-ons.. sofar i worked on VS 2005 and created ARD through B1DESetup_2005_1.3_VS2005 without any problem.. now what version i have to use to create ARD.. B1DE only available for Frameworks upto 2.0 only in Downloads Section.Any suggestion...
-- Ganesh

Hi
Still now there is no new version of B1DE for Visual Studio 2008. I think so new version will be released soon.
There is another method
Go to this path
C:\Program Files\SAP\SAP Business One SDK\Tools\AddOnRegDataGen
run AddOnRegDataGen
Through this it could be solved.
-Anto

Similar Messages

Unable to load driver for Storage for Windows 2008 UCS B230 M2

I am trying to Boot from SAN windows 2008 R2. I have configured and connected the Cisco UCS Chassis and FI to our Network & Storage .I am having problem to install Windows 2008 R2 Server on Blades as it is not able to see Storage LUN while installation .I downloaded drivers from Cisco Support Site.
I tried drivers from ISO ucs-bxxx-drivers.2.1.3 latest version but Windows is showing driver is available but not installing the driver I am getting the following error and not showing the LUN hard disk to select the installation.
Windows is unabe to locate storage LUN. I am able to LUN while booting process.
I am not sure where I am doing wrong.or I am chosing wrong driver.

I don't see the error message either, but to install W2008 on a boot lun, you must
1) do the zoning of the vhba (initiator) to the pwwn of the storage subsystem port (target)
2) the lun masking / mapping has to be setup
3) fnic driver has to be installed
Therefore, if you don't see your boot lun, either 1) and or 2) has to be fixed
then
4) only one path should be configured (e.g. fabric a), because no multipathing is available during installation, this is very important, and necessary for W2003, 2008 and 2012
and
5) if you see the boot lun, and can install, but the boot fails, the problem is the boot policy !
Very easy ! Good luck !

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Error Msg when installing Office for Mac 2008 on New Mac Book Pro

Why Am I getting the message "Classic environment no longer supported" when I try to install Office for Mac 2008 install on a Late 2011 Mac OS X Lion 10.7.2
Here is a screen shot:

And for what it's worth, my choice would be (and is) LibreOffice, which I've used for about a year with nearly complete satisfaction. Last time I tried it three or four years ago, OpenOffice had the ugly, unrefined appearance of a Windows application; it had no Mac interface at all. That might actually be comforting to someone coming to the Mac from Windows, but as a 27-year Mac user, I hated it. I don't know whether OO has gotten a facelift in the intervening years.
The intermediate step between OO and LO was NeoOffice, which I used for several years. It was OpenOffice with a Mac face, and I liked it well enough. LibreOffice is its further evolution, more compatible with the latest MS Office files.

How do i install office for mac 2008 to my new i mac which has no optical drive. I have the Office discs and product key

how do i install office for mac 2008 to my new i mac which has no optical drive. I have the Office discs and product key

You could purchase any commonly available external USB DVD/CD writer, such as the excellent LG brand units sold on Amazon, for about $30 US. I've used an LG writer for years to save wear and tear on my older Superdrive.

Error in File UNKNOWN.RPT (Crystal for VS 2008)

I have read and implemented nearly every suggested solution to solve this riddle of a Crystal Error I am stumped with. Of course, on my dev box the report runs perfectly, as it should. However, if I deploy my simple report web project to my client's Windows 2003 Standard Server, running IIS 6, I get this error. I have literally implemented, or attempted to implement every single suggestion Google users have to offer, including adding security for nearly every user that has ever existed, to nearly every folder that has ever existed. I have uninstalled/reinstalled/upgraded from Crystal for VS 2008, up to Crystal 12, down to Crystal 10.....and the same exact error appears.
 
Here is what my report app consists of:
1. A single Crystal Report for VS 2008, in a reports folder (which I have granted full control permissions to everybody and my mother, along with permissions to Windows/Temp)
2. That report, when called from the code behind, loads the report and immediately exports the report to a stream, so I can render that stream to a pdf viewer for the user. (yes, very simple)
3. (I do pass load a dataset that is passed into the report too)
 
What happens on the server when the report is referenced/ran 
1. A Crystal .rpt file is geneated in the Windows/Temp folder 
2. The frustrating error appears on the screen 
 
I have read through all BO suggested fixes for this, and nothing. 
I have implemented all types of permissions changes, and nothing. 
I have checked then rechecked the registry settings (even though everything happens on the C: drive), and nothing 
I have reinstalled different versions/runtimes etc...and am now back to the original Crystal for VS 2008, and nothing 
 
My only total confusion, is that this report runs fine on my new Windows 2003 server. The only difference between my server and my client's server, is that my client's server also has Helm installed. That's it.
 
What is next? Is there any other solution I have not tried?
 
Actual Error Message: 
Error in File UNKNOWN.RPT: 
The request could not be submitted for background processing. 
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 
 
Exception Details: System.Runtime.InteropServices.COMException: Error in File UNKNOWN.RPT:
The request could not be submitted for background processing.
 
Source Error:
 
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
 
Stack Trace:
 
[COMException (0x800002ad): Error in File UNKNOWN.RPT:
The request could not be submitted for background processing.]
 CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +271
 
[CrystalReportsException: Load report failed.]
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +333
 CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +894
 CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod) +85
 Reports.ViewQuoteReport.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\AutoID\Reports\ViewQuoteReport.aspx.vb:30
 System.Web.UI.Control.OnLoad(EventArgs e) +99
 System.Web.UI.Control.LoadRecursive() +50
 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
Edited by: ohjonny on Feb 2, 2010 7:29 AM
Edited by: ohjonny on Feb 2, 2010 7:30 AM

I would pin this on the Helm (e.g.; works without, does not work with...). Couple of things you can try:
1) Call who ever you got your particular Helm from and see if they have any ideas
2) Use Process Monitor to see if it tells you what files / folders / reg entries are not being accessed. ProcMon is here:
http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx
Ludek

Unable to install new SP1 update for for Office for Mac 2008 on new MacBooo

The new update SP1 for Mac Office 2008 will not install on new Macbook Al - very slow to d/load and refuses to install - is tis due to MacBook or does it happen on other Macc as well ?

Zapdoc wrote:
The new update SP1 for Mac Office 2008 will not install on new Macbook Al - very slow to d/load and refuses to install - is tis due to MacBook or does it happen on other Macc as well ?
The terminology SP1 is a bit confusing. SP1 and such is mostly used with Win Office products. The latest update for Office 2008 is
"Microsoft Office 2008 for Mac 12.1.4 Update
This update fixes a calendar issue in versions of Microsoft Entourage that were updated with the Microsoft Office 2008 for Mac 12.1.3 Update. The issue prevents Exchange accounts in Entourage from sending meeting invitations and responses. This issue can occur when an Entourage identity is configured with more than one mail account. We strongly recommend that all Entourage users who installed Office 2008 for Mac 12.1.3 Update install this update."
and all updates have been named 12.M.N, M=0 or 1, N =4 in this case.
The update above, and earlier ones -- and updates for Office 2004 -- can all be found here for download:
http://www.microsoft.com/mac/downloads.mspx
Is this what you are trying to install? I did this update on my Al MB recently and it went fine.
Phil
Message was edited by: w7ox

Replacement optical drive for early 2008 MacBook

I own an early 2008 2.4 GHz Intel Core 2 Duo 13" MacBook that appears to have developed a fault with the MATSHITA DVD-R UJ-857E optical drive.
Unfortunately I am unable to get the optical drive replaced by Apple, as it seems they don't keep the parts for any machine over five years old. So I plan to replace the faulty unit myself. Can anyone recommend a replacement? The UJ-857E model doesn't appear to be available anywhere other than in the United states and then only as a refurbished unit and listed as an 857C which I assume to be from an earlier model.
I was wondering if there might be a more recent equivalent available that I might use instead. There seem to be several UJ-898 models for late 2008 MacBooks available, but I have no idea how much of a change Apple made to the internal configuration from early to late 2008.
Does anyone have any experience of replacing or upgrading their optical drive that they would be willing to share? I plan to follow the IFixit tutorials for the procedure. I just need to know what unit to buy as a replacement.

I would stick to what OWC (macsales) offers.
http://eshop.macsales.com/shop/superdrive/MacBook_13

What charger do I need for my 2008 macbook pro 15"

what charger do I need for my 2008 macbook pro 15"?

This one:
http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
Ciao.

I need a in car charger for my 2008 mac book pro,

I need an incar charger for my 2008 Mac book pro
Can anyone recommend one ?
Either 3rd party or original ?
If anyone has one to sell (and it will work on my Mac book) I would appreciate if you would sell it
I have bought 2 from ebay but they werent suitable
I need it urgently as I am going on a 9 month overland trip, with no mains power availible
The full spec for my Mac book is here
http://http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core- 2-duo-2.4-15-early-2008-penryn-specs.html

You'll need an inverter capable of producing 85 Watts of power for your Macbook Pro OR You can submit a request to Apple: http://www.apple.com/feedback/macbookpro.html

How to help my friend install Microsoft Office for Mac 2008

Hello, I have a friend in North Carolina whose mom recently got a MacBook Pro running OS X Mountian Lion (10.8), he will be coming on to join this discussion after I post it. He needs Microsoft Office for his mom and I just happened to have purchase 3 licenses (two of which I have already utilized). While talking to him over a Facetime call, I walked him through the steps of getting the free office for mac 2008 package from download.com (which seemed kind of sketchy). While the download actually looked legitimate, we ran the installer and it gave some kind of weird error message that said something like "Could not be installed onto Macintosh HD because the Mac OS X is not on that parition" (I'm paraphrasing my friend will contribute the actual message). Could someone please walk us through an easier (and preferably more secure) process? We just need to get to the point where I can give him my last license key. Thanks!
YraYra

You will have to check with Microsoft but I think what you are doing is illegal. The 3 license pack I think means 1 user 3 computers, not 2 users 3 computers.
You might have better luck posting on the Office for Mac forum. http://answers.microsoft.com/en-us/mac?auth=1

Best phone for syncing with Office for Mac 2008?

I'll be getting a new phone in a few months and I want to get one that syncs perfectly and effortlessly with Office for Mac 2008.
I currently use a Motorola Q and a Macbook Pro and have to go through isyncing Office with the Mac versions (iCal and Address Book) and then syncing using Missing Sync. It works, but it's slow and not very elegant.
What's the smoothest solution?
- Mike

Just be careful if you use categories in Entourage for your mail, calendar and contacts and determine whether those categories will move with your contacts and other data to the iPhone when it syncs. I doubt that it will if sync services works the same way between Entourage and iCal because it doesn't support the category capabilities in Entourage which is why people had turned to Missing Sync for the 2004 version of MS Office 2004
FWIW
Ben

Word for Mac 2008 - documents even at 100% size are too small!

I am new to Mac. Just started using Word for Mac (2008) on my new MacBook Air. (I do not have a current user contract with Microsoft for this Word for Mac, so I cannot call them for support.)
The 100% setting shows my new (and old) documents in a very, very reduced way. Only by zooming to the 200% setting can I get the documents to look a normal, standard size. I never experienced this on a PC, using Word versions 1995, 2000, 2007, 2011. I have searched the internet for answers, but have found nothing to solve this. I am sure there must be others having this same problem. Can anyone help me?

Apparently this is a shortcoming of Mac OS X - resolution independence would allow the display and real world size to match. There is also no way of offsetting this and entering the real dpi of your Macbook Air into MS Word - it just assumes the display is 72dpi and that is that. There is no way to make it correct as it stands unfortunately.
If you want to get technical a more detailed discussion can be found here:
https://discussions.apple.com/message/10187142#10187142

I am new to mac and am trying to understand how to do something i did in Word. In Word you can set up document so that you have 2 pages per 8.5 x 11 landscape page. Each page is treated as a separate page. Can this be done in word for mac 2008?

I am new to mac and am trying to understand how to do something i did in Word. In Word you can set up document so that you have 2 pages per 8.5 x 11 landscape page. Each page is treated as a separate page. Can this be done in word for mac 2008?

Suggest you ask on the Microsoft Mac forums since it's their software you have a question about:
http://answers.microsoft.com/en-us/mac

Record the CPU Load in a log for Windows 2008 R2

Use performance monitor and log it to a file.

Hi,
I am an Oracle DBA. I need to record the load of the CPU for windows 2008 R2. Load in the sense Total Memory, Available Memory, Cached and Free. All together into a log.
Kindly suggest me on the same.
Thank you.
This topic first appeared in the Spiceworks Community

B1DE For VS 2008

Similar Messages

Maybe you are looking for