B1ip detected an error

Hi,
When I activate the widget with this identifier
http://127.0.0.1:8080/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_XPT/INB_HT_CALL_SYNC_XPT.ipo/proc
the system asks me for a profile and password
I tried several profile (sa or manager or his or B1i B1iadmin) without success
All services are started
a little help would be nice to me
thank you
regards
Didier Le Van

Hi,
the username i use to login is 'B1iadmin' case sensitive.
the password is the password that you defined during the B1integration installation.
*Could be your B1i user password is not defined in the companyDB.
My step of installation :
Let say you pick SBODemoUS as your test database,
login the database manager and ;
1. set B1i user as super user
2. add password (try to avoid special character)
3. set password not expired
4. log off and login as B1i
install B1int, set the B1iadmin pasworrd and the B1i user password.
after done try to login.
nd.Q

Similar Messages

SAP B1ip detected an error : 403 Forbidden

Hello, I recently installed SAP B1 8.81 PL09, and the standalone B1 integration component. I followed the installation guide perfectly, and still receive an error whenever I try to use my dashboards, or open the integration framework.
I installed on my iPad app version 1.4.0.
When I try to connect to the server b1ic, with a sniffer http on port 8080 I get the following error :
SAP B1iP detected an error:
Emitted HTTP-Code
403 - Forbidden
All configurations on the client side app and sap are correct.

hi,
please check this NOTE: 1495563 - [SAP Business One Integration component troubleshooting|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303134393535363326]
regards,
Fidel

SAP B1iP detected an error 404 Not found

我根据Yatsea 写的Creating New Dashboard Packages for Sap Business One 8.8以及提供的sample一步一步的去做，到最后一步提示如下错误：
SAP B1iP detected an error:
Emitted HTTP-Code
404-Not Found
Internal Reason
/com.sap.b1.dashboards/001sap0001.XXX_Top_10_BPs.Top_10_BPs/default.html [err004]
Recommendation
Check for the correctness of your activity or environment or ask your system-administrator for further help.
tid
10111016465218008162C0A8016D9A20
Full Internal Error Message
/com.sap.b1.dashboards/001sap0001.XXX_Top_10_BPs.Top_10_BPs/default.html [err004]
这是什么原因啊？我折腾了一天了，还没弄好哦。。。。

Hi Jay,
     我重新导入了，有看到event,是在Failure里面。
   Result Message是：no scenario step (vBIU) associated for this step for the incoming system (SysId)
     Msg是：
    <?xml version="1.0" encoding="utf-8" ?>
- <Msg xmlns="urn:com.sap.b1i.vplatform:entity" MessageId="10111710462131508066C0A801672D97" BeginTimeStamp="20101117104621" recording="false" logmsg="0009" MessageLog="true">
- <Header>
<IPO Id="INB_HT_CALL_SYNC_XPT" tid="10111709282731508057C0A801674050" />
<Sender Id="001sap0004" />
</Header>
- <Header>
<IPO Id="INB_HT_CALL_SYNC_XPT" tid="10111709282731508057C0A801674050" />
<Sender Id="001sap0004" />
</Header>
- <Body>
<Payload Role="T" Type="Call" add="" />
- <Payload Role="S">
<io xmlns="urn:com.sap.b1i.bizprocessor:bizatoms" pltype="ure">==== data-length: 0 ====</io>
</Payload>
</Body>
- <Body>
<Payload Role="T" Type="Call" add="" />
- <Payload Role="S">
<io xmlns="urn:com.sap.b1i.bizprocessor:bizatoms" pltype="ure">==== data-length: 0 ====</io>
</Payload>
</Body>
</Msg>
为什么会失败呢？失败的原因是什么呢？怎么解决呢？
我看了里面Warning的信息：
An IPO-Execution profile cannot be given, as the necessary log-information is missing!
Make sure to set in the config-file 'xcellerator.cfg' the log-level for the components
'com.sap.b1i.bizprocessor' and 'com.sap.b1i.dblayer' to 'CONFIG' (restart B1iP afterwards).
Then, enable detailed logging for the particular IPO-Step and re-execute the particular IPO-Step!
所以我检查了我的xcelerator.cfg文件。
Dolphin
Edited by: Wu dolphin on Nov 17, 2010 3:52 AM
Edited by: Wu dolphin on Nov 17, 2010 4:47 AM

SAP B1iP detected an error: 500 -internal server error

Hi expert,
I have an error message when I add new network location with http://<server ip address>:8080/B1iXcellerator/exec/dummy.
Error message is
" The folder you entered does not appear to be valid. Please choose another"
I have B18.8 PL15, B1iiSN 88 PL03 and windows 7 64 bits machine.
Also I've got error message as below when I enterd http://<server ip address>:8080/B1iXcellerator/exec/dummy address to internet exploere.
"SAP B1iP detected an error:
Emitted HTTP-Code
500 - Internal Server Error"
I need to edit BizPackage and BIU docuemnts from xml editor.
Thanks
Joanne
Edited by: Joanne Lee on Feb 15, 2011 10:46 PM
Edited by: Joanne Lee on Feb 15, 2011 10:46 PM

Hi,
I also experiencing this error :
when accessing : I'm using windows 7 profesional B1iSN 9.0, what's need to be configured ?
http://127.0.0.1:8080/B1iXcellerator/exec/webdav/
SAP B1iP detected an error:
Emitted HTTP-Code:
500 - Internal Server Error
Internal Reason:
while trying to invoke the method com.sap.b1i.bizprocessor.BizStoreURI.isUniqueURI() of an object loaded from local variable 'buri'
Recommendation:
Check for the correctness of your activity or environment or ask your system-administrator for further help.
Full Internal Error Message:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: java.lang.NullPointerException: while trying to invoke the method com.sap.b1i.bizprocessor.BizStoreURI.isUniqueURI() of an object loaded from local variable 'buri'
Log-ID:
LID150209170906235005790AD33703754E

SAP B1iP detected an error 401 unauthorized

the user encountered the error in subject when launching cockpit.
the SQL server 2008 is a named instanced. I've configured another TCP Port for this named instance.
Installing integration component, B1event sender and DIproxy successfully.
in the integration framework, SLD, tested connection to DB and B1DI successfully also.
server is windows 2008 64 Bit.
I've installed J2SE 5.0 32 bit and 64 bit. during installation of integration, have selected the path correctly.
B1i user is assigned B1iINDIRECT_MSS and B1i licence and is a superuser. password is also set.
uninstall and reinstall integration components numerous times, still unable to resolved.
have went through troubleshooting guide on error 401 and doesn't resolve the issues.
Any expert can advise?

Hi,
try to apply this solution I quoted from B1_88_InstallDashboards_EN.pdf file :
When you are getting an authorization error (401) please check if you entered the correct password for the Business One user u201EB1iu201C
■try to logon to SAP Business One with user u201EB1iu201C and this password
■If necessary apply new password
JimM

Win 8.1//Recover error at fourth supplemental disc//Detect some error during PININST_BBV.

Hii Team,
Please find the product details for your need full:-
Product number: F6C57PA#ACJ
Product: HP ENVY TouchSmart 15-j109tx Notebook PC (ENERGY STAR)
Issue- recovery attempt has failed select one of the three buttons.
Below is the error log in the notepad:-
[13:34:51.78] ChkErrBB.CMD : Detect some error during PININST_BBV.
[13:34:51.78] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[13:34:51.78] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
Tss to isolate the issue:- Bios updated no go, bios defaults no go, checked with another set of rcds but same issue on the fourth discs on different dvd's also.
RCD kit Part#:-
749548-D62
749549-D62
749550-D62
752228-B22
Error Comes at recovery dvd:- 752228-B22.
HP Experts kindly intervene with the case for a way out from the issue asap.

This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
Please see HP Forum thread Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults;
1) Boot computer – immediately click / press F10 to get into the BIOS Manager.
2) Press F9 to set the BIOS to factory default.
3) Press F10 to "Save and Exit"
4) Redo the Recovery – remember to leave the wireless light “on” during the Recovery
Other thing to try: don't use the supplemental disc... set the system date in BIOS to 2012... run "Minimized Recovery" instead of "Factory Reset"
I currently have the same issue with my HP 15t-j100 CTO and HP 13 Split x2 (both on loan from HP). I have tried various fixes/solutions posted on the forum, but haven't been successful in recovering my computers. In both cases I an using a USB Flash Drive set up as HP Recovery Media. It appears you are using an external CD/DVD drive and 4 DVDs as your HP Recovery Media. My computers display a "Restoration Incomplete" dialog box and CTOERROR.flg displays;
Please contact HP in your country / region, via the HP Worldwide Support Portal, for official HP assistance.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393}   2013-10-14 21:53:00:256-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}   2013-10-15 04:15:54:069-0700   1   162   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Download   Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF}   2013-10-15 12:10:38:196-0700   1   193   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}   2013-10-15 12:15:25:676-0700   1   183   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Install   Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0}   2013-10-15 12:15:25:766-0700   1   202   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D}   2013-10-15 19:29:31:486-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65}   2013-10-15 19:29:49:702-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}   2013-10-15 19:30:05:744-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}   2013-10-15 19:30:08:753-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD}   2013-10-15 20:00:05:044-0700   1   183   101   {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}   501   0   wusa   Success   Content Install   Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}   2013-10-16 00:11:39:832-0700   1   148   101   {00000000-0000-0000-0000-000000000000}   0   c8000247   AutomaticUpdates   Failure   Software Synchronization   Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.

The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End!

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

The application detected an error that prevents changes from being saved.

Hi. I'm having this problem almost all the time when I do some color correction.
"The application detected an error that prevents changes from being saved. To avoid losing your work, quit Final Cut Pro."
Any ideas why this is happening?
I'm on a 2010 Mac Pro running latest Mavericks and latest FCP X.
I already removed FCP X, and all the effects I have installed. But still the issue persists.
Thanks.

That could have happened. I can't remember though.
Is there any work around?
I currently only have 1 open library and 1 event on it. If I move or copy that event into a new library, would that in theory work?
Thanks for the help so far.

Detect some error during PININST_BBV HP envy-15035eo

Hello!
I just bought a new Samsung SSD 840EVO to my HP Envy-15035eo running Windows 8.1. I popped the SSD in to my computer an ran the recovery I bought from HP. After the computer reboots a couple of times the recovery restars and go back to the initall stepps of the recovery. Then if i pull out the USB-drive and reboot the computer ill get the message
"The recovery attemt har failed. Select one of the following buttons: Save log , Details. Retry". If i press "Details" I will get the following message:
"ChkErrBB.CMD : Detect some error during PININST_BBV.
ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log"
I have tried to do a recovery after I load setup deafaults in the BIOS and enabled Legacy support. I have even done a Start up test on the new SSD and it passes the test.
Any help would be greatfull! Thanks!

1) Try Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults
•Boot computer – immediately click / press F10 to get into the BIOS Manager.
•Click on F9 to set the BIOS to factory default.
•Save and Exit
•Redo the Recovery – remember to leave the wireless light “on” during the Recovery... Didn't work for me
2) Set System Date to 8/4/2012 and Redo Factory Reset and System Recovery... Didn't work for me
Ignition75 states "I managed to get the recovery to work, by changing the system date in BIOS to 2012."
3) Set BIOS to factory default, System Date to 8/4/2012 and performed Minimized Recovery (based on one of these posts)... Successful Minimized Recovery... Set BIOS to factory default, System Date to 8/4/2012 and performed Factory Reset... SUCCESS
Don't know what, how, or why it worked... but it worked.
Please try the above suggestions and report back with your findings.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Envy m6 - getting error while recovery of my OS. Detect some error during PININST_BBV

I am receiving the following error while reinstalling my OS using the HP recovery Discs.
I get this window with no close button except for Save , Details or Retry.
[ 2:37:49.82] ChkErrBB.CMD : Detect some error during PININST_BBV.
[ 2:37:49.82] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[ 2:37:49.82] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
(The two .LOG files do not exist on the C: partition which is there.)
My hard disk has crashed, so I used a new one [1 TB] which is bigger in size from the factory installed 750GB.
I did all the tests by pressing F2 - system diagnostics. All system tests have passed.
Please help me with the solution, as I need my laptop running ASAP, but the recovery is giving problems.
I did other procedures to reset the Boot options to Factory defaults using F9. IT didnt help me.
It keeps throwing the same error.

I have tried all the suggestions to change the BIOS date from year 2013 to 2012. The recovery CD's shipped from HP automatically changes the date to 8/27/2012. I can't help it.
I bought another new HDD with size 750 GB similar to the facotory shipped HDD. Did the start-up test again. Everything passed. But, in the recovery, I still have no luck.
I reordered the Recovery discs from HP which had the application repair disc as well. I used all the 4 recovery discs , and the system ran for almost 2.5 hours and gave the same Error PININST_BBV , BurnbootWan.log and other one.
Can anybody help to resolve my recovery issue ASAP. the model is HP envy m6-1188ca.

On closing Acrobat Windows detect an error "Data Execution Prevention has closed Adobe Acrobat".

Hi,
I developed a plugin which captures Before/After open, close and save events and perform some operation inside these events.
I tested the plugin in Windows XP and Acrobat 9.0.0 and 10.0.0 and everything works fine. But when in test my plugin on Windows Server 2008 Standard 32 bits, then windows detect an error while closing the acrobat and shows the following message:
"Data Execution Prevention has closed Adobe Acrobat"
I am using Acrobat 10.0.0 for testing in Windows Server 2008 operating system. Also, debugging the program shows no error but plugin does not produce the desired result when tested on Windows Server 2008 Standard 32 bits operating system.
Can anyone please giude me how to resolve this issue??
Thanks in advance!

Are you really using 10.0.0? You've installed no updates to it??
From: poortip87 <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 6 Feb 2012 21:46:02 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: On closing Acrobat Windows detect an error "Data Execution Prevention has closed Adobe Acrobat".
On closing Acrobat Windows detect an error "Data Execution Prevention has closed Adobe Acrobat".
created by poortip87<http://forums.adobe.com/people/poortip87> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4190399#4190399

Detect some error during PININST_BBV. [SOLVED]

I have a HP 2000-2b16NR that needed a new HDD. I ordered and just received the Recovery DVD's for this model from HP and after 5 times running the HP recovery I get this error message.
ChkErrBB.CMD : Detect some error during PININST_BBV.
ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I've already tried defaulting the BIOS like suggested in another thread for this error with no joy. I even pulled the CMOS Battery and removed the Main Batt/Power as well.
Searched the HDD for these two log files BurnBootWarn.log and BurnBootMerge.log and they do not exist in c:\system.sav\logs. However did find this one in there BurnBootMergeBBV1.log.
Replacement HDD is a HGST Travelstar H2IK500854SP 500GB / 5400RPM / 8MB Cache
I suspect that one of the DVD's is bad or HP's Recovery Process is utter cr@p!
RESOLVED: Seems the Supplemental Disk is bad. Ran recovery skipping the Supplemental Disk and all is fine.
This question was solved.
View Solution.

Thanks! That worked great.

"Detect some error during PININST_BBV."

I am still working on the recovery from this problem which AxshunJaxun was able to help me correctly diagnose.
I have since received Recovery Media from HP and purchased a new HDD which should be an improvement over the factory part. And, I have spent part of yesterday and most of today working on the recovery process with no success (multiple failed attempts).
I keep getting a "recovery failed" message from the Recovery Manager application with the specific detail message of:
[ 2:37:49.82] ChkErrBB.CMD : Detect some error during PININST_BBV.
[ 2:37:49.82] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[ 2:37:49.82] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
(The two .LOG files do not exist on the C: partition which is there.)
I have followed the process (had to initially hit ESC instead of F2) laid out by anthony82 and encountered no errors on the memory and HDD tests.
According to this post this is likely a problem with the Recovery Media from HP. Has anyone else seen this type of problem and determined that to be the case as well?
This question was solved.
View Solution.

DarkSetz wrote:
I am still working on the recovery from this problem which AxshunJaxun was able to help me correctly diagnose.
I have since received Recovery Media from HP and purchased a new HDD which should be an improvement over the factory part. And, I have spent part of yesterday and most of today working on the recovery process with no success (multiple failed attempts).
I keep getting a "recovery failed" message from the Recovery Manager application with the specific detail message of:
[ 2:37:49.82] ChkErrBB.CMD : Detect some error during PININST_BBV.
[ 2:37:49.82] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[ 2:37:49.82] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
(The two .LOG files do not exist on the C: partition which is there.)
I have followed the process (had to initially hit ESC instead of F2) laid out by anthony82 and encountered no errors on the memory and HDD tests.
According to this post this is likely a problem with the Recovery Media from HP. Has anyone else seen this type of problem and determined that to be the case as well?
http://h30434.www3.hp.com/t5/Notebook-Recovery/dv4-ChkErrBB-CMD-Detect-some-error-during-PININST-BBV...
"Here is how you fix it. When you boot up your computer hit F10 that will take you to the BIOS manager. then hit F9 to set BIOS to factory default save and exit then do recovery. Worked for me and it only took me 3 weeks to figure it out lol."
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Detect some error during PININST_BBV

Hi All,
I sold my HP Envy 17" via eBay, before I shipped it I did a recovery, to give the customer that new laptop experience, it worked OK however windows wouldn't activate. Microsoft kept saying it's locked by a 3rd party. The customer returned the laptop, I gave a refund, and now I'm trying to sort the issue out.
HP sent out recovery disks, now, when I'm trying to perform the recovery, towards the end of the recovery I'm getting the "Detect some error during PININST_BBV" message.
I've tried resetting BIOS to defaults.
I've tried turning on legacy boot in BIOS.
I'm out of options, I don't want to call HP support because it's just too painful a process.
Has anyone got any ideas?
Thanks.

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Tried Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults
•Boot computer – immediately click / press F10 to get into the BIOS Manager.
•Click on F9 to set the BIOS to factory default.
•Save and Exit
•Redo the Recovery – remember to leave the wireless light “on” during the Recovery... Didn't work for me
Set System Date to 8/4/2012 and Redo Factory Reset and System Recovery... Didn't work for me
Set BIOS to factory default, System Date to 8/4/2012 and performed Minimized Recovery (based on one of these posts)... Successful Minimized Recovery... Set BIOS to factory default, System Date to 8/4/2012 and performed Factory Reset... SUCCESS
Don't know what, how, or why it worked... but it worked.
Please try the above suggestions and report back with your findings.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

B1ip detected an error

Similar Messages

Maybe you are looking for