B1TCH (DIC tools ) for SQL 2008 and SAP b1 8,81

Hi
In the past , I used B1TCH tools for updating fileds in jurnal entry with SQL 2005 and also B1 2007 verion.
but now I cannot use it with SQL 2008
is there any comment?
Thanks

Try: Get Your Kicks with DI Commander

Similar Messages

Monitoring/ tuning tool for sql server and os environment

What is a good tool for monitoring/tuning OS and SQL layers.

OS and SQL are different things, and I am not sure what you mean under layers.
To further expand my question, what OS build, what SQL Server edition?
All these have enormous impact on strategy.
Then the question is for what? OLTP need one tuning, DW another.
Monitoring is also a question of budget, how much allowed to spend?
Secondly, this forum is not dedicated to these kinds of questions.
Arthur My Blog

Where is the management Studio for SQL 2008 Express?

Can anyone point me to where I can download the management studio for SQL 2008 Express.
I've downloaded and installed SQL 2008 Express without problem but can't find the management studio.
Help.

Paradox1 said:
The 2008 version of the Management Studio is not a stand alone installation and can only be installed as part of the SQL Server 2008 Express with Tools or Advanced installation.
Like many others, I spent countless hours trying to figure out how to install the Management Studio for SQL Server 2008 Express - Advanced installation (same should apply to the w/ Tools version). What happened in my case was that I installed Visual Studio 2008 Express and during that process a stripped down "Instance" of SQL Server 2008 was installed that did not include the Management Studio. Through much pain and torture I learned that the Management Studio can only be installed during installation of the first instance. To delete that first instance, you must go to "Add or Remove Programs" and remove "Microsoft SQL Server 2008". The removal process will only remove one instance at a time and if you have installed more than one instance you need to keep going until all instances have been removed and the application completely disappears from the Add or Remove Programs" dialog. Note: You do not need to uninstall any of the other SQL Server 2008 applications that also appear in the "Add or Remove Programs" dialog. Then go back through the install process as follows: Double click on SQLEXPRADV_x86_ENU.exe to load the SQL Server Installation Center and then go to Installation > New SQL Server stand-alone installation. Then proceed through all of the installation steps until you get to “Feature Selection” and click on “Select All” to toggle on all of the Shared Features, which should include Management Tools - Basic.Continue the process from there and you should be good to go. Hopefully this will help others to avoid much of the pain that many of us have already experienced.

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SQL Agent and SAP Agent

hello gurus,
     I am in need of technical details of SQL agent and SAP agent of Symantec database backup server for SQL server/ windows.
    Can anybody please help me in this??
Thanks and Regards,
Rahul

Hi Kevin,
     I have some queries and i believe, you can answer it.
I have the following system
OS/ Applications details
1) Windows 2003 enterprise edition 32 bit
2) MS SQL Server 2005
3) SAP ECC 6.0
Sever details
1)     IBM x3650 dual Xeon server 5120@ 1.86 GHz,
2)     RAID level I
3)     RAM 8 GB
I want to go for Symantec database backup software. What information I have is, to take SAP systems database backup through Symantec you need to have.
1) SQL Agent of Symantec
2) SAP Agent of Symantec
                Given these information can you please help me out in putting the backup system in place.?
Thanks and Regards,
Rahul

Versioning Tool for SQL Server?

Problem:
Does Microsoft have a versioning tool for SQL server?
I'm thinking about similiar tool as visual studio team foundation but for SQL server?
WOuld like to see any changes in a stored procedure in different version.

Additionally you can also refer below article.
http://blogs.msdn.com/b/bahill/archive/2009/07/31/come-visit-revisit-the-beer-house-continuous-integration.aspx
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Cyrstal Report 2008 and SAP BW

Hi,
BOE 3.1, Crystal Report 2008 and SAP Integration Kit 3.1 installed on the window server 2003.
Trying to build the Crystal Report on top of SAP BI 7.
Set the MDX driver setting in Crystal Report.
In Crystal Report, I click on Create Report from Query.
Now on the Field Explorer, I can see that each Characteristic has generated the following:
Example:
Company Code
-->Company Code Node ID
-->Company Code Parent Node ID
-->Company Code Member Unique Key
-->Key
-->Medium Name
-->Char of accounts (Key)
-->Chart of accoutns (Long Name)
1) I understand that the following are generated by Crystal Report, but where are the Chart of account (Key and Long Name) coming from??? I dont have this in the Query Designer.
There are many other field appears under the Company Code charateristic but I dont know where are there coming from?
-->Company Code Node ID
-->Company Code Parent Node ID
-->Company Code Member Unique Key
-->Key
-->Medium Name
Now, I have drap-and-drop the characteristic Company Code and use it in the Crystal Report.
2) Strange, when I preview the Crystal Report, it is display as Text (Medium Name) where as this is display as Key in Query Designer.
Why?
Please help, thank you.

Hi,
see below:
) I understand that the following are generated by Crystal Report, but where are the Chart of account (Key and Long Name) coming from??? I dont have this in the Query Designer.
There are many other field appears under the Company Code charateristic but I dont know where are there coming from?
-->Company Code Node ID
-->Company Code Parent Node ID
-->Company Code Member Unique Key
-->Key
-->Medium Name
>>> Chart of account most likely are DISPLAY ATTRIBUTES
Now, I have drap-and-drop the characteristic Company Code and use it in the Crystal Report.
2) Strange, when I preview the Crystal Report, it is display as Text (Medium Name) where as this is display as Key in Query Designer.
>>> if you take the field from the field explorer without open the list / collapse it the default that is being displayed is the text.
Ingo

Integration for Business Workflow and SAP Interactive forms by Adobe

Hi
Is any of you able to watch the following SDN eLearning Session ?
Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)
I can play nearly all the other eBooks, but not this one. Any idea ???
Regards, bernhard

I solved the problem.
It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
Greetings, Bernhard

SQL 2014 license for SQL 2008

Hi,
I'm purchasing SQL 2014 license.
Can I use the SQL 2014 license for SQL 2008 or 2012.
Thanks,
Sathish
Sathish

Hi Sathish,
For more detailed information regarding to the license issue, please call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the
Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
Regards,
Elvis Long
TechNet Community Support

Error during DatabaseCopy using SAP tools for SQL Server (v7.12)

I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR 2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE 2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
 function:CallTheLogInquirer
is validator: true
WARNING 2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE 2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </body></html>
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AM

This is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh

Silent Install for SQL 2008 admin tools, to be pushed out via SCCM 2012

Hi I would like to know if you have any information on Silent App installs for MS SOL fetchers only? I really need to know what MSI to use in my Application and any switched i can incorporate for deployment though SCCM 2012.
Thanks,
Manny

Hi,
do you want to install SQL 2008 admin tools? and what tools do you want to install? and what is your application? And do you want to deploy the installation script via SSCM? Please be more clear.

Source for Custom Action Table in SQL 2008 and above.

Up till SQL 9.0, there used to be a CustomAction table in SqlRun.msi but this file was removed in the later versions. Is this still there in any other file or is there an alternate source for pausing the install process at a certain stage?
yup

SQLrun.msi is removed from 2008 onwards but it was not used for stopping intall process as per below link it was used for starting SQL server and getting info about list of application installed
SQLmsi file
What is your requirement exactly
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
My TechNet Wiki Articles

Connectivity between SQL Serevr 2008 and SAP BW using Microsoft Connector 1.0

Hi ALL
         I am trying to connect to SSIS 2008 to SAP BW using Microsoft Connector 1.0.
Following are stepes I performed.
1. Created RFC on SAP BW Server.
2. Created Prcess Chain in SAP BW.
3. Created SSIS Package using SAP BI Source. Here I set Execution Mode : P Trigger   Process Chain.
The process chain is executing fine on SAP BW Server, But it is unable to send back a
notification to SSIS package. And here my SSIS package failed.
I am getting following error message :
[SAP BI Source] Information: Process Start Process, variant Start Variant for MSBI has status Completed (instance D8Z84GJ2RLV7WCI2IYK5CZ1R3)
[SAP BI Source] Error: An internal exception occurred.
Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException:
An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
Before this error I am getting following messages are :
[SAP BI Source] Information: Process Data Transfer Process, variant Z09_O101 -> Z09_H101 has status Active (instance DTPR_D8Z84GJ2RLVZKYTTUHZRFEG0V)
[SAP BI Source] Information: The component is waiting for a notification.
Is there any way to test the both the way connections? I mean SAP BW -- SSIS &                SSIS --- SAPBW.
Can any one please explain me entire connectivity architecture between SSIS and SAP BW using Microsoft Connector 1.0. (I mean how these RFC are working and how SSIS is pulling the data from SAP BW)

I am having the same problem. We actually loaded data a few times but now it does not work. It is amazing that we cannot find help for this problem. Has anyone been successful using the BI connector 1.1 to load data to a BI system using SSIS. I think
this had to do with either a DLL problem on the machine running SSIS or the Service Pack level of the BI system. I cannot find any documentation showing versions. I have looked through the documentation that was written back in 2008 but can't seem to
get it to work.
Sorry we are trying to push data (BW Destination) to BI it looks like you are trying to get data from BI.

SQL Server Data Tools for SQL 2014 setup

Hello,
I have been using SQL server 2008 with Visual Studio 2008 to perform the ETL processes.
I have recently got SQL 2014 and realized that Business Intelligence Development Studio does not come with it so I have to download SQL Server Data Tools for Visual Basics 2012 or 2013 from:
https://msdn.microsoft.com/en-us/data/hh297027
Can someone advise what exactly I have to do if I want to start using SQL 2014 with SSDT? I still have VB 2008 installed and all my packages were created with that version.
Do I need to download VB 2012 or 2013 plus SSDT and then SSDT? Do I also uninstall VB2008?
Thanks in advnce

Hello,
If you want to keep developing packages for SQL Server 2008 then you need to use BIDS 2008, you cannot use SSDT.
If you want to upgrade BIDS projects to SSDT, then you can use Integration Services Project Conversion Wizard from Visual
Studio or SSIS Package Upgrade Wizard from SQL Server Management Studio (SSMS).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

JDBC 1.2 for SQL 2008

Hi Gurus,
I searched in SAP Marketplace and saw that the JDBC adapter 1.2 posted there is for SQL 2005 server only. May I know where I can download a JDBC 1.2 adapter for the 2008 SQL server? I'm working with XI 7.0.
Thanks all.
Regards,
SAPenthusiast

Hello,
Check these notes:
Note 639702 - JDBC Driver for Microsoft SQL Server
Note 1600699 - Microsoft jdbc driver 1.2 support
I think you can just use the JDBC 1.2 that appears for download in SQL Server 2005. Check http://msdn.microsoft.com/en-us/sqlserver/aa937724 for example. The same driver is used to connect different DB versions.
Cheers,
Diego.

B1TCH (DIC tools ) for SQL 2008 and SAP b1 8,81

Similar Messages

Maybe you are looking for