B210a red cast and ICM

Hi have just installed a new B210a.
On my 4x6 prints, there is a feint red cast on the prints.
I also retouched the images in a popular piece of image software, but on printing, the images look like the originals and not the retouched versions - they are nowhere near as bright and clear as the monitor image.
Printer properties says ICM is disabled.  What should I do about ICM with my HP DV9689ea laptop and the B210a?
Neil

I'm having the same problem but with a green cast.  And my prints are "muddy" as well -- nowhere near the vibrant prints my Photosmart 8250 produced. I tried printing with ICM disabled and then with ICM handled by the printer with no visible improvement.

Similar Messages

  • My Canon Pixma Pro9000 Mark 2 printer and red cast to prints

    My Canon Pro9000 Mark 2 prints with a severe red cast on all prints. It has worked great for 3 years prior on my Mac. Just updated and installed Mavericks (OS 10) and believe that to be the culprit. Already checked ink tanks, ran printer head tests, cleaned and deep cleaned, and so forth. Does any Mac user (or other) know of a fix for this? 

    It may be a little different with the 9000 as it is several models back by now.  But what I explained should be close.
    Don't have it?  Get it HERE  <--- click me
    EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
    Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

  • Handling colour: working in red, white and black

    I've got a music video project which was shot (HDV) in very rich colour in the inside of an old car with red leather seats, and it's well styled. I want to do something a little different with the colour in post - by saturating the reds, whites and blacks and desaturating the rest, to land up with an un-natural look that will suit the style of the production. Is there a way to selectively desaturate and work with colour in certain frequency spectrums rather that mids/highlights? This tends to put a colour cast over the entire image, which I don't want.

    Well you sure picked the three worst colors to work with!
    Search this forum for "pleasantville effect" and crack open the manual to read all about the threeway color corrector and "limit effect"
    Have a blast.

  • Photos have a red cast

    Hi:
    I just read a very long Forum post involving Chris Cox from July 2010 regarding the referenced issue; unfortunately the thread had left the problem unresolved in 2010. I have a Nikon D3 camera, Windows 7, CS5, and a Epson R3000 printer. Everything was working well together, then "snap", ALL photos have a magent cast. When Windows Photo Gallery or CS5/Bridge are first opened, the photos import with correct color balance immediately. Then, the screen "blips", and all photos have a magenta sunburn. If I plug a thumbdrive of the same photos (downloaded from Windows>Pictures) into a Mac with CS5 and an Epson 4880 printer, then everything works perfectly and no magenta in the work flow. This red cast in photos seems to have been a long standing issue for many people, I hope a resolution has been found by now for this frustrating problem.  Thank you, Steve  [email protected]

    its all photos now have a red cast
    i dont think its a iphoto issue
    fred

  • All the pictures have an red cast to them

    all photos  have a red cast to them

    Hi there cqerqso,
    Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Extreme red cast on iPhoto after editing

    Some, but not all, photos edited in iPhoto exibit an extreme red cast distortion when I try to use them in a slide show or if I try to export them. I have tried several different formats on export and all show the red cast. The photo also changes to the redcast when I go into the info mode.

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    If that's doesn't help Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
    Happy Holidays

  • Safari 4 images all have red cast until mouse over?

    I've searched fairly extensively for anyone else having this same problem, and I note a number of possibly related threads on the colour/color management in Safari, but this problem seems to be slightly different. Perhaps someone will tell me this is a feature, but I can't find it listed. I'm finding that on many pages, such as www.news.com.au, images (of any size) have a distinct orange or red cast until I pass my mouse over them. A smaller but possibly related problem occurs with text and especially links, which are sometimes a garish bright blue until my mouse rolls over them.
    To fix the images requires only a mouse over, and seems almost instantaneous, but this is tedious, and the pages look really ugly. Does this happen on all pages? No, for instance I did a search for "Steve Jobs" on Google images and the results all look fine. Do I have a MBP and a second monitor (which has been mentioned in the other threads)? Absolutely, a 24" Apple LCD.
    If I understand the color management issues, images don't suddenly correct themselves when you move the mouse over them, which is why I thought I'd post this to see if there is a fix, or if anyone else is experiencing the same thing.
    Thanks for any replies.
    Ivan

    And I'd like to report that although the red cast has gone away, it pales in comparison to the new problem, where images go monochrome/sepia, which I'm now experiencing. Moving the window over to the laptop screen and back to the second display seems to fix it, not exactly a great workaround. I hope someone fixes this bug soon, it's pretty nasty.

  • Red cast

    Hi,
    When using the 'Image Overlay' in the Retouch menu of the D3100 (i.e. putting two NEFs on top of each other) and I import the resulting file in Lightroom (or CameraRaw), it's got a very strong magenta cast, which I can't get rid of.
    Anybody any idea what causes this?
    When I import the same file in Picasa or another un-Adobe related RAW converter, this cast is not there.

    It's a bug. On my machine I get the red cast if I choose any option for the number of rows other than 5. Other people report five or less works. At any rate, EVERYONE reports choosing any number of rows greater than 5 in the Options section results in the red cast. One person reported his mother rather liked the look....
    Francine
    Francine
    Schwieder

  • What would cause a MacBook Pro display to begin having a red cast to everything I view? MacBookPro1,1 Mac OS X, 1.3 GHz Intel Core Duo, 1 GB 667 MHz RAM

    All of a sudden my MacBook Pro (Granted it is an old computer) started having a red cast to the display.  All shading and shadows are red now.  Up until yesterday, I never had any problems with the display.  Is it just getting too old?  Computer works fine otherwise.
    Hardware Overview:
      Model Name:          MacBook Pro 15"
      Model Identifier:          MacBookPro1,1
      Processor Name:          Intel Core Duo
      Processor Speed:          1.83 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per processor):          2 MB
      Memory:          1 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          MBP11.0055.B08
      SMC Version:          1.2f10
      Serial Number:          W86100NWVJ2
      Sudden Motion Sensor:
      State:          Enabled

    Your install disk must look like this
    and not like this.
    Those gray disks are machine specific and will only work with model of Mac that they shipped with.

  • I have Mac pro and firefox 3.0.19.I am trying to download a video from youtube.? I can see the video. I want to download it and save in my computer to see it again. I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me t

    I have mac pro and firefox 3.0.19
    I am trying to download a video from youtube.?
    I can see the video. I want to download it and save in my computer to see it again.
    I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
    When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
    == This happened ==
    Every time Firefox opened
    == I want to download a video from youtube

    No, this reply is not helpful. It simply generates this little gem:
    "This service requires the conversion feature to be enabled.
    Configure conversion ?"
    And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

  • I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" the error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

    I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
    You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See http://kb.mozillazine.org/Unable_to_save_or_download_files

  • After re-installing my MacBook Pro hard drive, I lost my Firefox/Mozilla 'top banner' (red ,yellow and orange in color) and with it my ability to down load via a small tab located top right on it's bar. How do I get this function back??

    Recently I found it necessary to re-install my entire operating system, and I lost my ability to down load streaming videos. I am an artist almost 70 yrs. old, and am not very computer proficient which is why I purchased a MacBook Pro. I used Firefox/Mozilla to do downloading because it was easy. When I brought my system back up I found that the top 'Firefox banner' had changed from red, orange and yellow in color to shades of gray. With this change found that I no longer had the download 'tab' to click on to initiate downloads (located top right on the Firefox top section).
    I've tried re-installing Firefox and Antbar download helper but am still not able to download. How do I get the download capability back again???? ......roxor999

    Your storage device is probably faulty.  It would be helpful if you indicated the EXACT model/year MBP that you have.
    Ciao.

  • Narrow cast and wide cast in ABAP OO

    Hi Xperts
    Considering the code below can the concepts of narrowing cast and widening cast be explained ? Kindly help me in getting a clear picture of the usage of it.
    CLASS C1 DEFINITION.
      PUBLIC SECTION.
        CLASS-DATA: COUNT TYPE I.
        CLASS-METHODS: DISP.
    ENDCLASS.                    "defintion  C1
    CLASS C1 IMPLEMENTATION.
      METHOD DISP.
        WRITE :/ COUNT.
      ENDMETHOD.                    "disp
    ENDCLASS.                    "c1 IMPLEMENTATION
    CLASS C2 DEFINITION INHERITING FROM C1.
      PUBLIC SECTION.
        CLASS-METHODS: GET_PROP.
    ENDCLASS.                    "c2  INHERITING C1
    CLASS C2 IMPLEMENTATION.
      METHOD GET_PROP.
        COUNT = 9.
        CALL METHOD DISP.
      ENDMETHOD.                    "get_prop
    ENDCLASS.                    "c2 IMPLEMENTATION
    START-OF-SELECTION.
      DATA: C1_REF TYPE REF TO C1,
            C2_REF TYPE REF TO C2.
    PS: Pls dont post any links as i already gone thru couple of those in SDN but couldnt get a clear info

    Hi
    I got to know abt narrow cast: referecing a super class ref to a subclass ref so that the methods in subclass can be accessed by the super class reference. Below is snippet of the code i'd checked. Hope this is correct to my understanding. If any faults pls correct me. Also if anyone can explain wideing cast in this context will be very helpful
    FOR NARROW CAST
    {size:8}
    CLASS C1 DEFINITION.
      PUBLIC SECTION.
        CLASS-DATA: COUNT TYPE I.
        CLASS-METHODS: DISP_COUNT.
    ENDCLASS.                    "defintion  C1
    CLASS C1 IMPLEMENTATION.
      METHOD DISP_COUNT.
        WRITE :/ 'Class C1', COUNT.
      ENDMETHOD.                    "disp
    ENDCLASS.                    "c1 IMPLEMENTATION
    CLASS C2 DEFINITION INHERITING FROM C1.
      PUBLIC SECTION.
        CLASS-METHODS: GET_PROP,
                       DISP.
    ENDCLASS.                    "c2  INHERITING C1
    CLASS C2 IMPLEMENTATION.
      METHOD GET_PROP.
        COUNT = 9.
        CALL METHOD DISP.
      ENDMETHOD.                    "get_prop
      METHOD DISP.
        WRITE :/ 'Class C2', COUNT.
      ENDMETHOD.                    "DISP
    ENDCLASS.                    "c2 IMPLEMENTATION
    START-OF-SELECTION.
      DATA: C1_REF TYPE REF TO C1,
            C2_REF TYPE REF TO C2.
      CREATE OBJECT: C2_REF TYPE C2.
    *  CREATE OBJECT: C1_REF TYPE C1.
      BREAK-POINT.
      C1_REF = C2_REF.
      CALL METHOD C1_REF->DISP_COUNT.
      CALL METHOD C1_REF->('GET_PROP').
    {size}
    Edited by: Prabhu  S on Mar 17, 2008 3:25 PM

  • HT4108 I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine.  I moved the TV disconnected cables to move now I can only get video and no sound back on TV.  Any suggestions

    I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine.  I moved the TV disconnected cables to move now I can only get video and no sound back on TV.  Any suggestions ?

    No answer but marking as answered because I want to clear my unresolved questions.

  • Narrowing cast and widening cast

    Hi All,
           I want to know what is the use of a narrowing cast and a widening cast in ABAP objects.
    Can someone please give an example ?
    Regards,
    Ashish

    Hi,
    Check out this link, This will guide you on ABAP Objects
    http://www.sap-press.de/katalog/buecher/htmlleseproben/gp/htmlprobID-28?GalileoSession=22448306A3l7UG82GU8#level3~3
    Both narrow and wide casting are related to inheritance.
    In Narrow casting, you assign a runtime object of subclass to runtime object of superclass. By this assignment , you can access your subclass by using runtime object of your superclass. But here the important point is that, you are assigning subclass reference to super class reference, so you can only access the inherited components of subclass through super class reference.
    Suppose you have a super class lcl_vehicle. it has two subclasses lcl_car and lcl_truck.
    r_vehicle = r_car.
    In Wide casting, you assign a superclass reference to subclass reference . Before this, you do narrow casting,
    Now when you assign a superclass reference to subclass reference. You can access the inherited as well as the specific components of subclass.
    taking the same example,
    r_car ?= r_vehicle.
    '?='  wide cast operator.
    Regards
    Abhijeet

Maybe you are looking for