B2B Add on - Party configuration using B2B - AS2 Aadapter

Can anyone help me to configure Party using B2B AS2 Adapter .
I tried configuring the channel using Party passing the Sender ID . Getting this error.
Cannot get channel binding: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=67140c68525433f4a8468af588477d5e;

Hi Mithali,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660?QuickLink=index&…
Under Sender Agency; put <your Business Service / System / Comm. Comp name>; example XID_112 or whatever
Under Sender Schema; put ALE#KU; if your Partner type of Sender is KU in WE20
This combination will derive the sender Party.
Similarly you can put the receiver boxes if you want to de-normalise and derive the receive party name.
Let me know if it helps; else can help you more!!
Thanks
Saurabh

Similar Messages

MDS-01401: Fails in updating configuration using B2B console

Hello B2B experts,
I am getting the following error applying any changes to the TP using B2B console. I checked the log and it doesn't give me more information than the following one. I restarted both weblogic and soa severs, and still it is throwing the same error.
MDS-01401: Updating a node in one document "/soa/b2b/tp_MyCompany.xml" using a node from a different document "/soa/b2b/tp_MyCompany.xml.bak" is not allowed.
ADF_FACES-60097: For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096: Server Exception during PPR, #39
Any ideas on this one?
Thanks in advance!

Thanks Anuj for quick response.
There was a problem with one of the file, tp_MyCompany.xml has been backed up by one of our developer as tp_MyCompany.xml.bak and he included that in the exported TP file. When we did an import of that file, the .bak file took precedence over the .xml file. Rather, B2B was trying to update both the files I believe and it was throwing out the expcetion. I deleted the .bak file and reimported it again and everything is now working as expected.
Regards!
Edited by: user021211 on Jul 19, 2011 8:23 AM

Reg XML to Plain Conversion using B2B add on

Hi All,
This is an outbound scenario where the message is sent to AS2 receiver channel and the output is Plain file. I have added all the module parameters
and the content type as application/plain. While testing I am facing the error,
Exception caught by adapter framework: XML-Parser error occured while parsing: Cannot initialize XML to plain handlerCan not find a matching configuration for sender party "", service , receiver party ,service , namespace , action in table B2B_PLA_CTRL_IF.
Can anyone help me on this issue.
Cheers,
Neethu

Hi Neethu,
Did you import the content? See How to install the new B2B add-on , see step 5.1
You need to do this for the message type you want to exchange ((EDI, ansi X.12, ...).
Also, please do step 5.2. I guess this is not the case.
Kind regards,
Dimitri

Need information on how to integrate bank interfaces for 820,824 transaction using B2B add on

HI All,
Can anyone share some knowledge on how to integrate 820,824 transactions using PI B2B add on .
I have downloaded B2B mapping kit and B2B toolkit into IR and uploaded SCA files into PI server.
But I can not see any mappings provided for 820/824 by SAP in B2B mapping kit.
Please share your comments.
Regards,
Dinesh

Hi Dimitri,
I am looking for 820,824 for ANSIX12 format.
And i guess SAP has provided example mappings only for 810,830 and 850.
I am unable to see the example mappings provided by sap for 820/824 in B2B mapping toolkit.
Is there any way or place to find the example mappings for these formats?
Regards,
DInesh Male

B2B software package you use for AS2

Hi All,
We are using Oracle 10G B2B. We are adding a new supplier. Our new supplier asks " what is your B2B software package you use for AS2"
I said " Application server integration B2B of version 10.1.2.3.0", then immediately he replied
"I could not find Oracle Application Server Integration B2B 10.1.2.3 listed on the Drummond Group website for AS2 interoperability certification. Would the software package be listed under another name?"
Could you please help us to reply his question..

Hi,
Ask your supplier to check the AS2-3Q05 report of Drummond group. It is available at below link -
http://www.drummondgroup.com/html-v2/as2-archive.html
You can find Oracle Application Server 10g (10.1.2) listed here. Also give him the refernce of below doc -
http://www.drummondgroup.com/pdfs/AS2_5.05.04_Final_release.pdf
Regards,
Anuj

B2B add-on

Hi,
We all know that B2B scenario involves Party to Party communication as the systems involved
in message exchange are in different landscapes.We also checkbox for sender uses virtual receiver
while creating receiver determination.
We have one B2B scenario where (EDI to IDoc-XML) parties are not used.
Does B2B add on eliminates the need for party to party comunication?
Regards,
Mayank Yadav

Thanks All for Help,
Actually in my scenario B2B add on was installed and Parties were not used.
So I got confused why Party is nt used here since its a B2B.
Now I got a clear idea about B2B addon- it converts EDI to EDI-XML
just like Seeburger BIC mapping Designer does for Seeburger AS2 adapter.
Morever Party was not used here(in my B2B scenario where B2B add on was installed;business component is used instead of Business system) because 1 sender and 1 receiver system is there.
Party will be used only when we have multiple external sender/receiver systems across the landscape so that they can be identified with globally valid IDs.

B2B Add on (Edi separator) IDOC AAE Receiver Error

Hi
We are getting an error, Transmitting the message to endpoint <local> using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.engine.interfaces.messaging.api.exception.ConfigException: No sender agreement configured that matches the message's header fields (sender party: "xxxx", sender service: "", interface: "xxxx", receiver party: "", receiver service: "xxxx") when using IDOC_AAE Receiver adapter with ICO, scenarion works fine with standard IDOC adapter on integration engine
We have 7.31 dual stack with B2B addon sp03
We are using control records from mapping (reciver idoc adapter >advanced>control record in IDOC XML> all options selected)

Hi,
Yes, I filled the information on EDI separator channel, however this works fine with standard idco reciever adapter on integration engine, the issue is when I use ICO with Idoc_aae reciever adapter
you mean to say I have to use (.*) filling all sender edispeartor channel information mandatorily
what if I have to use the information to filter the message type from a multiple message type EDI file
Again this works absolutely fine with idco adapter on IE

Need to send XML msg to TP using B2B, but format should be Orcl XML Gateway

Current Interface:
==================
We have an EBS 11.5.10 with XML Gateway.
Actively we were exchanging XML data with 5 trading partners (different application maintained by 3rd party) using EBS XML Gateway.
XML Gateway uses OAG Format (attached the format bellow)
Future Interface:
=================
Our company is in process of moving our EBS 11.5.10 app to Oracle Fusion Apps.
Oracle Fusion app interfaces will be using Fusion Middleware and B2B.
For that we doing a POC interface between a Fusion MDM and 1 Trading Partner.
Problem:
========
But, when sending XML message to other TP using B2B, the format is different. i.e. Message in the XML Format.
Eg.
<?xml version="1.0" ?><OUTB_FUS_IND_DATA> <OUTB_FUS_IND TRANSACTION_TYPE="TP_INDIVIDUAL_OB" TRANSACTION_SUBTYPE="INDIVIDUAL.UPDATE"> <OUTB_FUS_IND KEYVALUE="100010058799220" PERSON_FIRST_NAME="Xyz" PERSON_LAST_NAME="Abc"/> </OUTB_FUS_IND></OUTB_FUS_IND_DATA>
Oracle XML Gateway send message with message envelop, which have attributes as text field and payload in the XML message format (XML Gateway envelope details is below).
(Sample XML messages goes out: HTTP Body
TRANSPORT_PROTOCOL=OXTA
TRANSPORT_PROTOCOL_VERSION=1.0
REQUEST_TYPE=SEND
MESSAGE_ID=A1234567890ZZ0987654321
MESSAGE_TYPE=XML
MESSAGE_STANDARD=OAG
TRANSACTION_TYPE=TP_INDIVIDUAL_IB
TRANSACTION_SUBTYPE=INDIVIDUAL.UPDATE
DOCUMENT_NUMBER=12345
PARTYID=9999
PARTY_SITE_ID=8888
PROTOCOL_TYPE=HTTPSu2013OXTA
PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
Therefore, when I receive the document in PI the mapping fails due to an incorrectly formed message payload. For example:
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&REQUEST_TYPE=SEND&MESSAGE_ID=9EA3BD2......
We want B2B send messages to other TP as same way XML gateway use to send.
How we solve this issue?
XML Gateway Envelope (Manual)
=====================
In addition to the business document such as a purchase order or invoice in the XML Payload, a set of message attributes are transmitted. Collectively, these attributes are called the XML Gateway envelope.
This section discusses the XML Gateway envelope and its data in the validation process for inbound messages, or its source of data for its creation for outbound messages. Data entered into the Trading Partner Setup form is referred to as data in the trading partner table. Data entered into the Define Transactions form is referred to as data in the transaction table.
Most of the data elements are copied from the Trading Partner tables or the Transaction tables to the XML Gateway envelope.
Attribute
=========
MESSAGE_TYPE
MESSAGE_STANDARD
TRANSACTION_TYPE
TRANSACTION_SUBTYPE
DOCUMENT_NUMBER
PARTYID
SOURCE_TP_LOCATION_CODE
PARTY_TYPE
PROTOCOL_TYPE
PROTOCOL_ADDRESS
USERNAME
PASSWORD
ATTRIBUTE1
ATTRIBUTE2
ATTRIBUTE3
ATTRIBUTE4
ATTRIBUTE5
PAYLOAD

First of all EBiz and B2B/BPEL are two different products meant for different purpose and hence you cannot expect that EBiz and B2B/BPEL should have same functionality.
Whatever headers you have mentioned, those are added by OXTA (Oracle Transport Agent) which is part of EBiz. You can add almost all these headers in Oracle B2B in "Additional transport headers" section of Transport Protocol Parameter.
Search for "Additional transport headers" at below link -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/b2b_tps.htm#BABBCDHI
Regards,
Anuj

Sap pi b2b add-on

Hello
We are currently planning on getting on SAP PI B2B ADD-ON. Currently we generate the EDI formatted file using file content conversion in the receiver file adapter. It is a very laborious task.
Does getting the B2B ADD-ON eliminate the file content conversion to produce the EDI file format ? Also how much time would cost would be saved if we got the b2b ADD-ON? Is there anyone who is doing file content conversion to generate the edi file format ? What are your thoughts?
Thanks!

Hi ,
Go through below link.
The SAP PI B2B add-on EDI capabilities unveiled
Regards
Venkat

Classifier mapping to read Sender & Receiver Identification Number from XML. How to handle in B2B Add on

In current See burger tool, We have this functionality to read Sender and Receiver Identification number from the XML. Is there any way in b2b add on to do this.

Hi,
The classifier within the Seeburger context is being used to call your parent mapping, in case you want to dynamically determine your mapping, based on data in the UNB/UNH segment.
Within the B2B add-on, there is no need to.
Only use module localejbs/EdifactConverterModule in case you want to convert to or from EDI.
You have a specific requirement or do you want to test something out?
Kind regards,
Dimitri

Error -: AIP-18510 while deploying a configuration in B2B

Hi All,
I am getting the following error while deploying a configuration in B2B.
Could someone please let me know why is this occurring since from the error there does not seem to be any set-up issue. It looks like some Internal Error.
If somebody has faced the same similar, please let me know what do we need to do to fix it.
Thanks In Advance,
Dibya

Hi Ramesh,
This issue is resolved. I just restarted the B2B server and then I deployed the configuration. It went through fine. I am not sure why the B2B Server is behaving inconsistently.
I am surprised as to how a simple restart can solve the issue.
Please let me know if you have any inputs on this.
Thanks
Dibya

B2B add on issue

Hi All , currently we hare installing single stack SAP PO .We are running very very late .
As per client commitment we must install the B2B add on tool in decentralised engine . We are facing the following issue .
Can not start
com.sap.aii.adapter.ediseparator.app ( 622677 / 2014 )
This is related to issue we are facing after the B2B addon support pack upgrade, I have updated the SAP
message with the required information and waiting for SAP's response.
We got an unofficial input from one of my friends in SAP that this feature is not possible in decentralised engine. I wish to know , has any one done it in decentralised engine , to be more precise , IS IT POSSIBLE ?
Thanks and Regards,
Arnab Mondal.

Hi Arnab,
Follow this thread: Error While Upgrading B2B AddOn to SP02
Seems like they face a similar problem.
Kind regards,
Dimitri

B2B add on for PGP encryption in SAP PI 7.11

Hi Folks,
I see that we can implement PGP encrytption in PI 7.11 SP08, Can anyone please provide me with the B2B add on install link from SAP market place which can enable SFTP adapter and PGP encryption.

Hi Kalyan
OSS note 1695521 provides the details of the download location. Below is a snippet of the note.
You can download the PI secure connectivity add on 1.0 at http://service.sap.com/swdc > Installation and Upgrades > Browse our Download Catalog > SAP NetWeaver and complementary products > PI SFTP PGP ADDON > PI SFTP PGP ADDON 1.0
You can download SP1,corresponding patches for SP0 and SP1 of PI secure connectivity add on 1.0 at http://service.sap.com/swdc > Support Package and Patches > Browse our Download Catalog > SAP NetWeaver and complementary products > PI SFTP PGP ADDON > PI SFTP PGP ADDON 1.0-->Choose the component Type
Rgds
Eng Swee

Why to use B2B when we can go with ...

why to use B2B when we can go with A2A with FTP services running in the source and target systems.
why do we go for parties if the above one is possible.
plz help out im into loads of confusion

Hi
A2A is application to application: when two applications in a company talk to each other we call it an A2A scenario and if its across Companies we call it B2B or buisness to buisness scenarios.
All the following links will explain the difference between A2A and B2B
With scenarios
A2A B2B Scenarios
can anyone explain A2A & B2B AND BPM & ccBPM with an example..
Help for Scenario! B2B or A2A
A2A Vs B2B
A2A and B2B
I hope this will answer your question
regards
--- prasad

Namespace appear after i send using B2B-BPEL adapter

Hi All,
i have a case here:
i have a PIP 4B2 that i remove all the Namespace declaration using BPEL PM and send to Oracle B2B using B2B-BPEL Adapter.
the PIP successfully send out but when receive at another end, the namespace appear again.
anyway to make sure that the namespace wont appear??
thanks
kin wah

hi ramesh,
finally i got time to test.
i tried both way , using B2B Adapter and AQ but the result is still the same.
let me show you this is the my payload from BPEL after my transformation
<Pip4B2ShipmentReceiptNotification><fromRole><PartnerRoleDescription><ContactInformation><contactName><FreeFormText>DUMMY </FreeFormText></contactName><EmailAddress>DUMMY</EmailAddress><facsimileNumber><CommunicationsNumber>DUMMY</CommunicationsNumber>
but after go into Oracle B2B, it become like this
<?xml version="1.0" ?><Pip4B2ShipmentReceiptNotification xmlns="http://www.edifecs.com/RosettaNet/100"><fromRole xmlns=""><PartnerRoleDescription><ContactInformation><contactName><FreeFormText>DUMMY </FreeFormText></contactName><EmailAddress>DUMMY</EmailAddress><facsimileNumber><CommunicationsNumber>DUMMY</CommunicationsNumber>
please advice whether i should log SR for this matter.
thanks
kinwah

B2B Add on - Party configuration using B2B - AS2 Aadapter

Similar Messages

Maybe you are looking for