B2B Console "missing" in SOA SUite 11g R1 PS3?

I have a brand new SOA SUite 11g R1 PS3 installation, using the following installation steps:
OracelXEUniv
WebLogic Server 10.3.4.0
SOA Suite 11.1.1.2
SOA Suite 11.1.1.3
SOA Suite 11.1.1.4
Created a new single server domain using teh new 11.1.1.4 developer template
I can start the weblogic console, no problem
I can start the enterprise manager console, no problem
when I try to start the B2B Web Console http://localhost:7001/b2bconsole, or http://localhost:7001/b2b I get the 404 HTTP error - the console applicaitn is not found
Can someone, please, suggest what I am missing?
Thanks in advance

Hello Michael,
I analyzed this issue and found that it is working as designed. Developers templates are designed for low memory hosts and hence certain applications like b2bui, composer, OracleAppsAdapter etc. does not get deployed by default. If a user wants to use these applications then he may target and deploy them manually from Weblogic Admin console.
As these applications may not be required for all users who installed SOA (because SOA installable contains many components of SOA like BPEL, Mediator, Rules, Workflow, B2B and BPM Suite as well and a developer may not be interested in using all these applications), so these apps does not get deployed by default.
For the benefit of other users of this community, I have blogged about the same here where you may also find steps that how to enable these applications -
http://anuj-dwivedi.blogspot.com/2011/02/b2b-consolesoa-composer-not-opening-up.html
Thanks for bringing this issue up here in this forum.
Regards,
Anuj

Similar Messages

How to configure ftpadapter JNDI in server Console for oracle soa suite 11g

Hi All,
I need to configure a ftp adapter in one of my bpel process. Could any one guide me pleas ,how to do FTP adapter jndi configure in admin server console?
Thank you.
Regards,
Satish

http://www.oracle.com/technology/architect/soa-suite-series/dynamic_endpoints.html
Configuring the End Point Properties for an Adapter through Oracle Enterprise Manager
does that help ?

Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL

Hi,
I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
BPEL DOMAIN : default
Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
So when I Configured the BPEL node property in Peoplesoft as :
BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
BPEL DOMAIN : default
I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
So I'm not able to proceed in this regard.
Any help in this regard is highly appreciated.
Thanks in Advance,
Girish
Edited by: user11214154 on Nov 23, 2009 8:12 PM
typo error

Hi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s)

Does the AS2 adpater is included by default in the SOA suite 11g or BAM

Hi,
I wanted to know that does the AS2 adpater comes by default with the SOA Suite 11g package or with BAM or we do need to have a seperate licensing for the adapter.
Thanks in Advance,
Jignesh

Hello Jignesh,
Oracle B2B (part of Oracle SOA suite 11g) supports AS2 exchange protocol. I don't think you need a separate license for that but still it would be better to confirm it once with your local Oracle Sales representative.
For Oracle B2B related info, please refer -
http://www.oracle.com/technetwork/middleware/b2b-integrations/overview/index.html
Regards,
Anuj

How to create users for B2B console in SOA Suite 11g?

Hi,
I have installed SOA Suite 11g and created a new user in weblogic server and assigned groups Deployers, Monitors & Operators. On trying to login(http://hostname:port/b2bconsole) using this new user, im not able to login and the below error is logged.
"There are no trading partners for this user".
Can someone plesae guide me on how to create a new user for B2B as i dont want to grant adminstrators group to developers.
Thanks,

Hi,
Please login as the weblogic server boot user into b2bconsole and then go to users tab of the host trading partner
and search for the newly added user [ provide full username ]
and then assign the role as administrator / monitor from there.
once this is done.. the newly added user should be able to login to the b2bconsole..
monitors have read only access and less priveledges..
Regards,
Vijay

Is B2B document editor necessary in SOA suite 11g environment?

Hi All,
In my server, SOA suite 11g is installed, which include B2B engine also.For devoloping a POC in B2B environment, document editor is necessary or not?. Without document editor, is it posible to devolop a simple POC? I am completely new to this B2B environment.
Regards
Dd

Integration B2B forum is -
Integration - B2B
Document Editor is optional and will be used in case of B2B. For further clarification, raise a thread in B2B forum.
Regards,
Anuj

Error while starting the AqAdapter in SOA Suite 11g Admin Console

facing an issue with the AqAdapter(Resource Adapter) in Soa Suite 11g Admin Console.
we go to Deployments --> Select Aq Adapter --> Currently it shows the status as Prepared
Now we try to Start it again --> it comes back with the error message mentioned below
weblogic.application.ModuleException: weblogic.connector.exception.RAException:
Jndi Name is null or empty. Errors were encountered while performing this operation.
source path on the admin server is mentioned here for this AqAdapter:
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/AqAdapter.rar
deployment plan :
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/was/Plan. xml
We check in the Configuration tab --> Outbound Connection Pools -->
here it shows the Group as javax.resource.cci.ConnectionFactory and under it we have setup
2 connection pool instances with JNDI names as : eis/AQ/aqSample & eis/aq/B2BAQ
Could someone please help here as to what could be the reason why this error is coming and
how we could resolve this.
With Regards & thanks

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

SOA Suite 11g Admin console EM link

I have installed SOA suite 11g onto a windows XP machine with a local loop back network adaptor. When I go to the WebLogic Server Administration Console home page the link for the Oracle Enterprise Manager is picking up the loop back network adaptors IP address (10.10.10.10). This results in the link not working when accessed over the network. I can replace the local IP address with the machine name or DHCP IP address within the browser to work round the issue. However, is there any way to correct this and re-configure the link to use the actual IP address like the other links?
Regards
Neil

Another way is to get rid of the Loopback Adapter (ie unconfigure it) and just install it. WLS has no issues with DHCP environments.
--olaf

SOA Suite 11g installation - B2B issue

Hi guys,
I just installed windows SOA Suite 11g on my machine. When I access the B2B and try to create a new version, I get the following error:
MDS-00522: failure to save document /soa/b2b/doc_EDI_X12.xml to the metadata repository
ORA-01573: shutting down instance, no further change allowed
ORA-01573: shutting down instance, no further change allowed
I am pretty sure that I need to change the configuration somewhere so that it does not save the file on some linux directory, but saves on my C drive somewhere. But I could not find the configuration location. I would really appreciate your help in this regard. Thanks

Seems like it is a SOA Suite installation issue. I am closing this post.

Cannot access EM console on SOA Suite 11g (404 error)

I have installed SOA Suite 11g on a new environment. The admin server and managed server (soa_server1) start up without any errors in logs. However after start up, I am unable to access the enterprise manager console at http://host:port/em due to 404. Interestingly, I can access the WebLogic administration console at http://host:port/console without any issue.
I have installed SOA Suite 11g before on my local machine and have never had any issue like this before.
Is there a way to manually start up the enterprise manager application? I have seen some advise in previous posts which mention the use of emctl (enterprise manager command line control) however, this does not appear applicable to the em app that runs on WebLogic application server in 11g.
Any troubleshooting advice would be greatly appreciated!

You can access the EM using http://host:7001/em url.
But for EM to be present in the domain, you should have created your domain with Enterprise Manager template selected. I think, you haven't done this step. Login to your WLS Admin Console, navigate to Deployments. Check for an application named 'em'. If it is not there, then this is the issue.
To get your domain extended with EM, do these steps.
1. Stop your servers in the domain.
2. Invoke the configuration wizard ($ORACLE_HOME/common/bin/config.sh/cmd)
3. Choose Extend Domain option. Select your domain.
4. Select Enterprise Manager template. Complete the wizard.
5. Start your servers.
Now you will be able to access EM, using the above URL.
There is no need for emctl in SOA 11gR1. Starting the Admin Server will help you to work in EM.
Hope this helps!!!

Namespace prefix in Root element missing during variable assignment in SOA Suite 11g

I need qualified element Namespaces in one of the target variables. All elements being referred to would have the namespace prefixed. This is working for all child elements, but not the for root element. How can i get the root element prefixed with the namespace?
We are using SOA Suite 11g and the Jdeveloper version we are using is 11.1.1.6.0
when i use transform operation to populate the target variable the variable gets populated something like this :
<inputVariable>
<part name="payload">
<Message>
<msg:Header>
<head:field1>xxxxxx</head:field1>
<head:field2>2013-07-09T08:00:55</head:field1>
</msg:Header>
</Message>
But the actual output we need is
<inputVariable>
<part name="payload">
<msg:Message>
<msg:Header>
<head:field1>xxxxxx</head:field1>
<head:field2>2013-07-09T08:00:55</head:field1>
</msg:Header>
</msg:Message>
We tried the fix suggested in one of the SOA threads but its not working for us and looks like that will work only for SOA SUITE 10g.
Please provide us any help/suggestions if anyone know the solution.
Thank you in advance for the help.

Any one can help us please.......

OracleBAMAdapter Configuration problem in SOA suite 11g

Hi,
In Oracle SOA suite 11g(11.1.1.2.0), OracleBAMAdapter configuration using WebLogic server console is resulting in the following error
* An error occurred during activation of changes, please see the log for details.
* [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
Steps used for configuration:
1) Modify adapter configuration using navigation:: Deployments -> OracleBAMAdapter -> Configuration -> Outbound Connection Pools -> oracle.bam.adapter.adc.RMIConnectionFactory -> eis/bam/rmi
2) Specified connection properties with BAM server port details
HostName localhost
InstanceName ADCServer1
Password welcome1
PortNumber *9001*
UserName weblogic
In config.xml (%Domains%/soa_domain/config/) , I could see the following library entry
<library>
<name>[email protected]</name>
<target>AdminServer,soa_server1</target>
<source-path>K:\OracleFMW\Oracle_SOA/soa/modules/oracle.soa.workflow_11.1.1/oracle.soa.workflow.wc.jar</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</library>
Could you please help resolving this issue?
Regards
Naveen

I do not think that would qualify as a solution :-). I was negligient in deploying Work Flow Application, and was not deselecting the checkbox in 11.1.1.2.0 JDeveloper, which reads out like "Deploy to all the servers". Thus it was trying to deploy it to BAM server as well as the Admin Server. I had to deselect it. It's pretty mundane thing that I was missing.
Warm regards.

JANZ User Properties in SOA Suite 11G

Hi All,
I am trying to configure users in Oracle SOA Suite 11G to JANZ Realm . I am able to add user.
In documentation i see user property file present in this location "SOA_Oracle_Home\bpel\system\services\config\demo-users-properties.xml " , I don't have BPEL folder in SOA_SERVER1 , File available in 10G not in 11G.
Basically i am looking to set Manager to users which i define.
Users which i add in admin console are stored in WebLogin Embeded LDAP Server. I am able to see list of user by connecting server using LDAP Browser.
When i try to add manager attribute using LDAP Browser , it fails , record is not displayed in Jdeveloper .
Appreciate if your help in finding user properties or setting Manager role to the user. How can i add more attributes defined in documentation.
Regards
Vijay

Hi Siva,
I don't think still there is any support for PGP in Oracle SOA. You may use java for PGP encryption/decryption and transfer externally encoded messages over SFTP.
Please refer -
Re: PGP Encryption/Decryption
PGP Encryption in B2B
Regards,
Anuj

Oracle SOA Suite 11g VS BPEL PM 11g

Hello,
What is the difference between SOA Suite 11g and BPEL Process Manager 11g?
I understand BPEL PM is a component of SOA Suite 11g.
What capabilities does SOA Suite offer more than BPEL Process Manager 11g?
When does a customer choose BPEL PM 11g over SOA Suite 11g? I assume BPEL PM 11g will be less in terms of cost.
Thanks,
Ram

Ram,
What is the difference between SOA Suite 11g and BPEL Process Manager 11g?BPEL Process Manager 11g is a standalone product and it is part of SOA Suite 11g as well. SOA Suite 11g is actually a group of products and it includes -
Oracle BPEL Process Manager
Oracle Service Bus
Mediator
Oracle Business Activity Monitoring
Oracle Web Services Manager
Oracle Business Rules
Oracle Human Workflow
Oracle Event Processing
JDeveloper and ADF
Adapters
Oracle Entitlements Server Basic
Oracle B2B
So you cannot compare SOA Suite with BPEL.
What capabilities does SOA Suite offer more than BPEL Process Manager 11g?Oracle BPEL Process Manager enables enterprises to model, deploy, and manage BPEL (Business Process Execution Language) processes. It includes a BPEL business process modeler, a scalable BPEL run-time engine, an extensible WSDL binding framework, and a monitoring console. So use of BPEL is limited till business process implementation only whereas SOA Suite offers complete middleware SOA solution.
When does a customer choose BPEL PM 11g over SOA Suite 11g? I assume BPEL PM 11g will be less in terms of cost.Yes, if you want to implement BPEL processes only then you can buy only BPEL Process Manager 11g but if you are looking for to implement a complete middleware SOA solution then licensing SOA Suite 11g will be the better option.
Regards,
Anuj

Error message deploying a composite in SOA Suite 11g

Hello,
We are attempting to deploy a composite to SOA Suite 11g (11.1.1.3). We're getting an 'Unable to register service' error message. When I inspect the log files I see the following entry as the first error:
Failed to retrieve policy[[
oracle.wsm.policyaccess.PolicyAccessException: WSM-06146 : Error deleting the attachment entries.
Anybody have any experience with this error? The error message reference has the following listed:
WSM-06146: Error deleting the attachment entries.
Cause: Failure occurred while deleting the attachment entries.
Action: Ensure that a valid list of policy subjects for deactivated lifecycle type is passed
Level: 32
Type: INCIDENT_ERROR
Impact: Configuration
I don't know how to "ensure that a valid list of policy subjects for deactivated lifecycle type is passed". Please help!!!!
Thanks,
jh

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

B2B Console "missing" in SOA SUite 11g R1 PS3?

Similar Messages

Maybe you are looking for