B2B. Enhanced version of the CRM organizational model
Hi,
We use B2B with sales order. We works with standard org. structure.
Enhanced version of the CRM organizational model.
http://help.sap.com/saphelp_sm40/helpdata/en/32/4473211b7778428efebc865e351cb4/content.htm
Does B2B works fine with Enhanced version of the CRM organizational model?
Denis
Hi,
Enhaced backend integration - Org model is used when there is more than one "org" attribute is assigned to higher org node , e.g. two sales offices assigned to one sales org.
In Product catalog configuration , in Catalog Variant, we can make entry for Sales org , Distribution channel & division,
so in this case , i feel there should not be problem in B2B scenario even if we use enhanced backend integration model.
hope it helps,
regards,
Prashant
Similar Messages
-
Enhanced backend integration version of the CRM organizational model
Hi,
I want switch from Enhanced org Model to Standard Org Model While doing client copy in EHP 1
Existing client is with Enhanced Org Model.
Any Suggestions?Hi,
As per SAP , if you are already using enhanced backend integration model , you can " NOT" return to the standard backend integration version,
http://help.sap.com/saphelp_sm40/helpdata/en/15/fbbb3ee5bf7173e10000000a114084/content.htm
Hope it helps,
regards,
PRASHANT -
Can someone explain how Groupware fits into the CRM mobile model?.
Can anyone explain how Groupware fits into the CRM mobile model?.
Also we have the client console on the laptop, but it looks very basic. My understanding is that it's supposed to be able to download sales details before going on the road, is that correct, or have I misunderstood something?.
JasonHi Jason,
For Groupware integration try looking at
http://help.sap.com/saphelp_crm50/helpdata/en/74/49af3ab73dc363e10000000a114084/frameset.htm
For Client Console functionality refer to
http://help.sap.com/saphelp_crm50/helpdata/en/9d/a7443bc6054d4ee10000000a11402f/frameset.htm
Regards,
Gervase -
HT2188 list of software versions for the different iphone models
where can i find a list of software versions for the different iphone models?
Wikipedia has a list of the original and current iOS for each device
http://en.wikipedia.org/wiki/List_of_iOS_devices -
Delete CRM Organizational Model entries
Hi
We are loading as part of a migration Market Plans under the Org Model.
After initial loading (still in test) we have found that most of the entries are incorrect and need to fix.
Because these are hierarchy based type entries, so i have to delete at the lower level and move up the hierarchy until all are deleted or is thete a way to select the highest level and this will delete all below.
There have been no assignments against these entries.
Thanks for your help on this one
TonyFYI, there is a way by using program RHRHDL00 and plugging in the Object IDs
Cheers
T -
Transferring Organizational Model
After the organizational model has been generated in CRM, can we transfer the sales structure to ECC (using delta upload), if at all if we modify the generated sales structure in CRM? Also if there are any changes made in ECC sales structure after the organizational model has been transferred to CRM, can we transfer the changes to CRM by installing the enhanced backend integration version of the CRM organizational model and copying entire sales structure from ECC to CRM?
Hi Namrata,
I believe this generation of Organizational model has been done using report:
CRM_ORGMAN_R3_ORGDATA_GENERATE.
Once you downlad an org structure from ECC, you cannot change it in CRM system. It can only be changed in the source system that is ECC.
Once you change the org structure in R/3, the changes wont be replicated back in CRM!!! Well, this is a disadvantage of doing it this way.
A better way is:
Create Org structure in R/3 and CRM independantly and then link them in CRM;
PPOMA_CRM-->Open your Org Unit >Functions Tab> select R/3 Sales org
In this case, you can make changes to org Units on both sides.
Hope the information is useful to you!
Sharif. -
Hi all,
I need some clear explanations about "<b>enhanced backend integration version of the CRM organizational model</b>" because I don't understand the SAP HELP explanations.
COuld anyone help me please?
Thanks in advance
JavierHi Javier,
1. There are 2 version in CRM Org Model.
a) SBIV (Standard Backend Integration Version)
b) EBIV (Enhanced Backend Integration Version)
2. EBIV is used to handle <b>multiple assignments</b> in CRM system.
3. As you know we have 3 Org Units as far as Sales is concerned i.e. Sales Org, Sales Office, Sales Group.
4. In R/3 there is a standard way to maintain multiple assignments among these org units.
Ex: Sales Group 'X' works (assigned) for 2 Sales Offices 'North' and 'South' simultaneously.
5. But in CRM this assignment is not as common as in R/3 and is not supported thru SBIV.
6. If you would like to have these multiple assignments made in R/3 available in CRM as well you may want to go thru EBIV.
7. Once you run EBIV you cannot go back to SBIV.
8. In EBIV divisions and distribution channels can only be assigned to sales units (sales organizations, sales offices, and sales groups). If they are assigned to any other neutral Org Units (Org Units without any Org Attributes), those assignments would be deleted once you shift from SBIV to EBIV.
Hope this helps.
Thanks.
Ajay Kiran -
Is there a standard SAP program or function module to load the CRM Organizational model data from Excel? How can we load the CRM Organizational model data from Excel?
Currently we are doing it manually using the transaction -
PPOMA_CRM - Maintain Organizational Model.Hello,
A standard report exists for this purpose : RHALTD00 .
1. You can also see sdn thread :
how to use report RHALTD00..Please help
2. Read the documentation against this report
3. Search with this report name in sdn/help portal and you will get more info.
Regards,Khan. -
Restore standard organizational model in CRM
Just out of interest: if I were to convert the organizational model in CRM into an enhanced one, is there any possibility to later restore the standard organizational model, for instance via a backup?
Just out of interest: if I were to convert the organizational model in CRM into an enhanced one, is there any possibility to later restore the standard organizational model, for instance via a backup?
-
Organization Model download from R/3 to CRM
Hi Guys
We are maintaining the complex Organization model in R/3 system and we need to Download the complete organization Model from R/3 to CRM and its relevant Organization structures too. I could not found a way what is the download object to be used to download the Organization model from R/3 to CRM .
will the Transaction CRMC_R3_ORG_STRUCTURE download the Organization model also , and what is the prerequisites for this organization model download
Thanks in advance
Warm regards
RajasekharDear Jayesh
1) Do the ALE specific settings like creating Logical systems , Rfc destination,
Distribution Model .
2) Specify the filters in the distribution model as per the note 312090, 550055
3) below link will be usefull to u
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1
Warm regards
Rajasekhar -
CRM Org Model vs. Roles
Does anyone know the difference between creating and providing security through CRM CIC Org. Model versus handling the security through Roles
Hello Mukund,
You can execute transaction CRMC_R3_ORG_GENERATE to download the R/3 sales areas into CRM.
Only new sales organizations are downloaded with CRMC_R3_ORG_GENERATE when is executed a second time, therefore is highly recomended to execute this transaction once. You can see it in the documentation of this transaction: IMG: CRM > master data > orga. management > data transfer >Copy R/3 Sales Structure.
The download from R/3 into CRM is supposed to be one-time download and all the maintanence should be done in both systems separately.
If you have already created organizational data seperated in CRM and ECC, therefore here there are just two options: either make all necessary assignments manually in PPOMA_CRM, or delete the CRM Org Model completely and rerun a new initial load with the above mentioned transaction.
To maintain the sales organization data manually in ppoma_crm, you need to go to the organizational unit's 'Function' tab, enter the corresponding R/3 sales organization there.
As for the distribution channel and division, they should be maintained in the 'Attributes'.
Hope the above information could be helpful.
Best regards,
Maggie -
Hi Gurus,
We have setup the Org Model in sync with R/3 in our Dev Client.
CRM => O 050000001 /20/00 (Sales Org/ Distribution Channel/ Division)
Corresponding R/3=> USAO/20/00 (Sales Org/ DChannel/ Division)
How do we transport it to Quality Client of CRM?
Do I have to setup the entire Org Model Again?
If any documentation/ Steps are available then it will be of gr8 help
Thanks
MukundHello Mukund,
You can execute transaction CRMC_R3_ORG_GENERATE to download the R/3 sales areas into CRM.
Only new sales organizations are downloaded with CRMC_R3_ORG_GENERATE when is executed a second time, therefore is highly recomended to execute this transaction once. You can see it in the documentation of this transaction: IMG: CRM > master data > orga. management > data transfer >Copy R/3 Sales Structure.
The download from R/3 into CRM is supposed to be one-time download and all the maintanence should be done in both systems separately.
If you have already created organizational data seperated in CRM and ECC, therefore here there are just two options: either make all necessary assignments manually in PPOMA_CRM, or delete the CRM Org Model completely and rerun a new initial load with the above mentioned transaction.
To maintain the sales organization data manually in ppoma_crm, you need to go to the organizational unit's 'Function' tab, enter the corresponding R/3 sales organization there.
As for the distribution channel and division, they should be maintained in the 'Attributes'.
Hope the above information could be helpful.
Best regards,
Maggie -
Error in generating Run time version of the KB Object of a VC Product
Hi All
There is a VC Product which needs to be transported to the CRM server via Middleware.
Hence I need to create a Knowledge Base (KB Object) and generate a Run-Time version of the same.
I am getting an error while generating the Run Time version. The description of the error is as follows:
Object characteristic COSTING_LOT_SIZE is supported in IPC scnearios 3,5
and
Object characteristic PRICE_LIST is not supported in IPC scnearios.
The exceptions raised are STPO-MENGE (Component Quantity) and SDCOM-VKOND (Variant Condition)
Please provide your inputs and suggestions in this regard.
P.S: Once I generate the run time version successfully, the CRM Middleware Consultant needs to download the VC Product to CRM.
Thanks in Advance
Regards
ChaitanyaHi Mike,
It likely is the viewer causing the problem. 2008 now has cascading parameters and the activex viewer does not support them.
All I can suggest is you try CR XI R2 which you can upgrade for free, you have to contact CIC to get a keycode to deploy your app, and test again.
R2 is out of support now so no fixes available...
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE
Thanks
Don -
Where to find the french version of the user guide Ipodnano 7th génération?
WHERE TO FIND THE FRENCH VERSION OF THE USER GUIDE IPOD NANO 7th generation?
Ou trouver le guide d'utilisation Ipod nano Génération 7 en version française.?The French manuals for the iPod nano are available here. However I do not see one for the 7th generation model. The English version for the 7th generation model is here.
-
Video content on Enhanced Version of book has disappeared
I had downloaded a sample of "The Prince of Tides" by Pat Conroy to my iPad. The book was supposed to be an "Enhanced Version" and the sample included a short video segment featuring the author. I believe that other video clips were to be included when the entire book was purchased. However, when I did purchase the entire book, no videos appeared, not even the one that had been seen in the downloaded sample.
I then tried to download the sample again to see whether the video was just something that was included as a come-on to entice you to purchase the entire book, but when I returned to the item page in the iBooks store, there was only a box indicating that I had already downloaded the book.
Any suggestions?golferl wrote:
Hi, I can't see this problem has been posed recently but I am unable to import video content from my Canon 5D Mk11 camera into iMovie. When I connect the camera to my Mac Appeture opens (which is set as default) and enables me to import the stills on the camera. However, when I open iMovie and click on the import from camera icon all I get is the default of the iSight camera. I have previously imported from this camera but can't recall doing it since I upgraded to Snow Leapard. Can anyone offer any advice? Many thanks.
Gary
If you get no better suggestions, keep uploading your Canon still files into Aperture, but try uploading its videos to your Mac's iPhoto. You can import videos into iMovie from iPhoto.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight
Maybe you are looking for
-
Why is the 3d option not working in ps cc
my computer is running this Chipset Model: Intel Iris Type: GPU Bus: Built-In VRAM (Total): 1024 MB Vendor: Intel (0x8086) Device ID: 0x0a2e Revision ID: 0x0009 Displays: Co
-
Help me.pixelated images
This Happens Even tho i Restart my after effects.Please Help me
-
When i updated to 5.0 I lost my apps
How do you restore
-
Authorized/Not authorized, that is the question
My logic board was replaced last month and now Itunes is saying my computer is not authorized. When I type in my info to authorize it says it is already authorized, then comes up with the window saying it isn't authorized again. I want to sync my i
-
Hello. I have recently taken my MacBook Pro apart to reapply the thermal grease (arctic silver 5). I put it all back together and it runs fine. One thing I've noticed is my Aiport Status doesn't show up in the menu bar. I opened the computer back up