B2B setup question.

I have a requirement, where the PO reqest will come from the partner in a ftp server and B2B will pick it up from that server and send the document to BPEL for further processing. I tried to set up B2B by following the purchase order tutorial present in B2B user's guide. Here the difference is that I have setup the remote trading partner is in the same server as the host TP and using the same repository. What is happening is that after I enqueue the message(test.xml) in IP_OUT_QUEUE, it seems B2B is picking it up because I don't see that IP_OUT_QUEUE after a few minues, but it is not going to IP_IN_QUEUE. I have set my BPEL process to look into IP_IN_QUEUE.
I also don't see any b2b.log file where I can see the errors(if any).
Do I have to use some other setup?
Can you please help?

I manually created everything present in that tutorial(because the import was giving some error) where GlobalChips is the Host partner. But what is the proper way to test it. As per the tutorial I should run the enq_ordrsp.sh . I did it and it enqueued in IP_OUT_QUEUE, but then nothing happened. Also, since the transport protocol is File, shouldn't I test by downloading the Acme_orders.xml file in the directory I mentioned in my URI?
My next question is if I can make EDIFACT tutorial work then I have another issue to sort out, which is, my document is in Rosettanet format. Somewhere in the discussion forum I saw that for my business case scenario, if I take purchase order tutorial and change the DCs to File/FTP it should work. But for the version of B2B I have File/FTP are not supported protocols for Rosettanet. Is it added later? or do I have to setup something else for getting those protocols for Rosettanet?

Similar Messages

  • LoginModule with JAAS, setup question for Frank Nimphius

    Hi Frank,
    i am trying to use a custom LoginModule in conjuction with the setup procedure in your "J2EE Security in Oracle ADF Web Applications" white paper. Have you done this before? can you provide roadmap for additional/alternate setup steps needed to use a LoginModule?
    this is my original post from early this week:
    JAAS Setup question
    thanks,
    brenden

    Brenden,
    please refer to the OC4J security documentation which si a part of the Oracle Application Server documentation that can be looked up online here on OTN. Custom LoginModule configurations require OC4J 9.0.4. In addition, this feature also only works with the jazn-data.xml provider and not with OID.
    From the perspective of this whitepaper, the LoginModule will be used by the OC4J container to authenticate users and thus should not require any change in teh paper.
    I haven't yet had the time created an example and document that showcases how to do this. Hopefully christmas will give me some rest to look into this.
    Frank

  • What is B2B setup for grouping transaction sets based on criteria.

    Hi,
    Oracle B2B offers a time bound Batching feature . However to handle following case such as Batching based on Order Number it is required to define the criterion.
    Could you please provide the information on B2B Setup for grouping transactionsets based on input parameter(Invoice id OR Invoice Number or Payment ID ) passing from back end application(BPEL) to B2B.
    For count based batching , my understanding is need to pass information in the format " <BatchMode>:<BatchID>:<Count>:<timeout>:" by parameters delivered with the IP_MESSAGE_TYPE construct. Which paramter of IP_MESSAGE_TYPE construct I have to use for passing the values to B2B in the format " <BatchMode>:<BatchID>:<Count>:<timeout>:"
    I am unable to find Action name attribute of IP_MESSAGE_TYPE construct to pass the values. Please provide the required information.
    Thanks&Regards,
    Sridhar.Rachumallu.
    Edited by: sridhar.rachumallu on Sep 7, 2010 11:06 AM

    Hi Anuj,
    Thanks for the information.
    ACTION_NAME attribute is not available with SCA. Three channels (Default,AQ,JMS ) are provided in B2B adapter for connecting to B2B. Which one supports action_name attribute?
    Design Time:
    Presently by using 'Default' channel of B2B adapter i am connecting to B2B. I am unable to pass the value for b2b property "ACTION_NAME" because invoke activity does not has respective sca normalized message propertie "b2b.actionName". So i am adding input property tab in .bpel file under corresponding B2B Adapter invoke tag as given below.
    <invoke name="Invoke_Put3070EDI820"
    inputVariable="Put3070EDI820_InVar"
    partnerLink="Put3070EDI820"
    portType="ns1:B2B_send_ptt" operation="send">
    <bpelx:inputProperty name="b2b.toTradingPartnerId"
    variable="Variable_TargetTPartner"/>
    <bpelx:inputProperty name="b2b.fromTradingPartnerId"
    variable="Variable_SourceTPartner"/>
    <bpelx:inputProperty name="b2b.documentTypeName"
    variable="Variable_TransactionSet"/>
    <bpelx:inputProperty name="b2b.documentProtocolVersion"
    variable="Variable_EDIVersionNo"/>
    *<bpelx:inputProperty name="b2b.actionName"*
    variable="Var_B2Baction"/>+
    </invoke>
    Defined variable ' Var_B2Baction' as string and assigned the expression as "concat('D:',bpws:getVariableData('Var_B2BBatchID'),':2:60')" and composite instance id expression "ora:getCompositeInstanceId()"mapped to 'Var_B2BBatchID' in BPEL.
    Run time :
    In application message of B2B coming the value as "b2b.actionName=D:608469:2:60". Here count coming as 2 but B2B is not grouping 2 transaction sets.Creating one EDI file for one transaction set.
    Why B2B is not considering incoming value "b2b.actionName=D:608469:2:60" for batching the transaction sets.
    Please suggest me the correct approach if i am wrong.
    Thanks&Regards,
    Sridhar.Rachumallu
    Edited by: sridhar.rachumallu on Sep 8, 2010 4:24 AM
    Edited by: sridhar.rachumallu on Sep 8, 2010 4:25 AM
    Edited by: sridhar.rachumallu on Sep 8, 2010 4:27 AM
    Edited by: sridhar.rachumallu on Sep 8, 2010 4:27 AM

  • Sending 3B2 document manually to test B2B setup and BPEL SOA composite

    HI
    I am trying to setup a new 3B2 agreement with a customer.
    Can I send a 3B2 document to B2B manually,on behalf of the would be customer to test if my B2B setups work
    Is there a way to do this.
    Regards
    Vamshi

    HI
    I am trying to setup a new 3B2 agreement with a customer.
    Can I send a 3B2 document to B2B manually,on behalf of the would be customer to test if my B2B setups work
    Is there a way to do this.
    Regards
    Vamshi

  • New UCS and VMware setup Questions

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    We are currently in the process of migrating out vmware infrastructure from HP to UCS.  We are utilizing the Virtual Connect Adapters for the project.  With the migration we also plan on implementing the cisco nexus v1000 in our environment.  I have demo equipment setup and have had a chance to install a test environment, but still have a few design questions.
    When implementing the new setup, what is a good base setup for the virtual connect adapters with the v1000?  How many Nics should I dedicate?  Right now I run 6 nics per server (2 console, 2 Virtual Machines, and 2 Vmotion).  Is this a setup I should continue with going forward?  The only other thing I am looking to implement is another set of nics for nfs access.  In a previous setup at a different job, we had 10 nics per server (2 console, 4 virtual machines, 2 vmotion and 2 iSCSI).  Is there any kind of standard for this setup?
    The reason I am asking is I want to get the most out of my vmware environment as we will be looking to migrate Tier 1 app servers once we get everything up and running.
    Thanks for the help!

    Tim,
    Migrating from HP Virtual Connect (VC) -> UCS might change your network design slightly, for the better of course .  Not sure if you're using 1G or 10G VC modules but I'll respond as if you've using 10G modules because this is what UCS will provide. VC modules provide a 10G interface that you can logically chop up into a max of 4 host vNIC interfaces totaling 10G. Though it's handy to divide a single 10G interfaces into virtual NICs for Service Console, VMotion, iSCSI etc, this creates the opportunity for wasted bandwidth.  The logical NICs VC creates provides a max limit of bandwidth to the adapter.  For example if create a 2GB interface for your host to use for vMotion, then 2G of your 10G pipe is wastes when there's no vMotions taking place!
    UCS & 1000v offer a different solution in terms of bandwidth utilization by means of QoS.  We feel it's more appropriate to specifiy a "minimum" bandwidth guarantee rather than a hard upper limit - leading to wasted pipe.  Depending on which UCS blade and mezz card option you have, the # of adapters you can present to the Host varies.  B200 blades can support one mezz card (with 2 x 10G interfaces) while the B250 and B440 are full width blades and support 2 Mezz cards.  In terms of Mezz cards now, there's the Intel/Emulex/Qlogic/Broamcom/Cisco VIC options.  In my opinion the M81KR (VIC) is best suited for virtualized environments as you can present up to 56 virtual interfaces to the host, each having various levels of QoS applied.  When you roll the 1000v into the mix you have a lethal combination of adding some of the new QoS features that automatically match traffic types such as Service Console, iSCSI, VMotion etc.  See this thread for a list/explanation of new features coming in the next verison of 1000v due out in a couple weeks https://www.myciscocommunity.com/message/61580#61580
    Before you think about design too much, tell us what blades & adapters you're using and we can offer some suggestions for setting them up in the best configuration for your virtual infrastructure.
    Regards,
    Robert
    BTW - Here's a couple Best Practice Guides with UCS & 1000v that you might find useful.

  • New Mac Pro setup questions..

    Hi,
    Just pulled the trigger on a Mac Pro 3gh, 4gb, ATI 1900. I am going to that from a dual 1.42 quicksilver and had some questions.
    It seems migration assistant may not be the best way to go. Is this true, should I reinstall everything? Is it possible to drag and drop apps to the new machine?
    Is it possible to get mail info from another machine to the new one? I have an iMac at home that I have been using Mail with and would like all the email addresses on the new machine at work. My old setup, I was still using Enterouge (sp) and would like to use Mail like at home.
    I have the stock 250gb drive and I need to figure out different drive scenarios. I recently bought two external 500gb drives before even thinking about a new system. I am a commercial photographer and one drive is a backup that lives offsite from my studio for protection. Should I mirror with an external?
    Thanks for any help!
    HD

    This FAQ may be helpful:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Written by Kappy with additional contributions from a brody.
    Here is a list of where your important data is stored ("~" stands for "Home"):
    Your Data in Documents:
    ~/Library/Application Support/AddressBook (copy the whole folder)
    ~/Library/Application Support/iCal (copy the whole folder)
    Also in ~ / Library/ Application Support (copy whatever else you need)
    ~/Library/Keychains (copy the whole folder)
    ~/Library/Mail (copy the whole folder)
    ~/Library/Preferences/com.apple.mail.plist (This is a very important file which contains all email account settings and general mail preferences.)
    ~ / Library/iTunes (copy the whole folder)
    ~ / Library/Safari (copy the whole folder)
    ~/ Pictures/iPhoto Library
    If you want cookies:
    ~/Library/Cookies/Cookies.plist
    ~/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in Documents/Microsoft User Data
    Also in ~ /Library/ Preferences/Microsoft
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • New W530 setup questions...

    Just received my W530 in the mail and I've been trying to get up to speed on all the new technology out there and how to properly setup my computer... I've tried various searches but haven't got a clear answer I don't think - here goes: 
    W530 8gb RAM (2x4), K2000, 500 gb HDD with raid option, x64 win 7, hi res screen
    I already bought a Samsung EVO SSD 250GB for the main drive which I will pickup from my US mailbox on Monday.
    The reason I bought the computer is because my 4 year old Acer just couldn't handle the intensity of PlanSwift and On-Centre digital estimating programs for construction. In addition I dabble with Chief Architect Premiere for 3D house design and the Adobe Suite to do graphics stuff for the company, etc., etc. I will likely take some CAD related courses at school as well in the future.
    My plan was to install OS and programs on the new SSD in the main bay and keep current project files on there. All misc pictures, videos and company files and other things on the HDD which would be in the UltraBay. I currently use about 180 GB and have another 250GB stored on an old laptop which I'd like to transfer over so everything is on one laptop. That one will be for internet searches in the garage for dirtbike repairs 
    Questions:
    1. Is it worth getting a 128 GB mSata drive for the OS (under $100 for Crucial)? Then have all program files on SSD in main bay and misc files on HDD in ultrabay? do I need an adapter for the ultrabay or is it already able to accept the HDD in the ultrabay? I haven't popped out the ultrabay yet to see... 
    2. I hear of using the mSata drive for Caching? Is 128 GB enough for OS and caching? When is the caching helpful? Should I use the mSata just for caching?
    3. Do I setup the computer with the OS on the HDD in the main bay and then clone/image it to the mSata drive oro SSD drive? Or do I start with the SSD in the main bay? I'm really confused on this part... 
    4. If necessary I will upgrade the RAM later - I think this is a straightforward upgrade as long as the voltages with the original RAM are the same - is this correct?
    5. I currently use a Sony KDL 40XBR8 TV as a second monitor at work - what connection should I be using to get the best display settings? I currently use an HDMI with my Acer for no particular reason. I also have an Acer 23" at home which will be replaced with another Sony or Samsung TV when we move into our new house... 
    sorry for the noob questions... I am typically really good at finding answers to my questions but i really didn't find any clear answers or they were so technical I didn't realize it was the answer to my question ;-)
    Can someone give me a practical approach to setting up my computer so I can start off right... thanks!!
    Daniel
    Thanks in advance
    Daniel
    ps can't wait to light this thing up with the SSD! It should rip pretty good... 
    | W530 | i7-3630QM | 16GB DDR3 | 128GB mSATA | 250GB 840 EVO | 500GB HDD | 1920x1080 | QUADRO K2000M |

    Hi Daniel.  When I bought my w530 I immediately installed a 256gb SSD. And now, over a year later I'm looking at getting a 256gb mSata for the boot drive. 
    1. The mSata port may only be Sata II but I figure it's not likely that I'll notice the difference.  High transfer rates are really only realized with large files and the OS is usually a large collection of very small files.  But that's just an opinion and your experience may vary.
    For an ultrabay adapter, check out newmodeus.  Quite a few forum posts mention success with this adapter versus the cheap ones from eBay.  I haven't bought one yet myself, but this is what I will get when the time comes.  (they also sell an adapter  to convert your optical drive into an external USB optical drive.)
    http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_7&products_id=400
    Also, search the forum and be aware that there are many who report problems of the w530 kicking out the ultrabay drive, but it seems better with the newmodeus adapter (as I recall; it was quite a while back when I read about it).  I haven't looked at what ncix carries for adapters but would be interested to know if you find something that works.
    And the drives shipped with the w530 come in different heights, and if it doesn't match the height of your SSD you will need rubber rails.  I still haven't ordered mine and I'm letting my drive sit in the overheight internal bay without proper support.   I just carry it very carefully.  I'm not sure of the best place to get rails, direct from Lenovo or elsewhere.  Last time I checked with Newmodeus they didn't sell just rails, but that may have changed (it was quite a while ago that I checked).
    2. Caching only helps if your OS boot partition is on a traditional harddrive.  With an SSD you won't utilize the caching as it won't be any faster (and may be slower).
    3. I would try installing direct to the mSata/SSD instead of cloning.  For a new system it's probably just as easy and less prone to issues.  Windows will take care of alignment, etc., and turning off features unnecessary for SSD (superfetch/prefetch/and all that).
    I also don't believe it necessary to install Win7 fresh.  It depends on your view.  I didn't want the hassle of tracking down a legit copy of Win7 install that I would trust, not to mention the hassle of installing it.  Instead, I made the restore DVD(s) using the Lenovo tools whlie the original harddrive was installed, then switched the drive with the new SDD and restored from the DVDs.  Then I went through and uninstalled any Lenovo software I didn't think was useful.  It's been working nicely ever since and I don't regret not starting with a fresh install.  Your experience may vary, though.
    4. Upgrading ram is very easy.  I'm not sure about specs, but if you don't match voltage and speed the system will downgrade both to the lowest common available.  You should be able to find many discussions about matching RAM voltage on the 'net.  You also would have to wait until your system arrives anyways because you don't know the specs of the RAM in advance (since Lenovo uses different suppliers).
    I'm not sure how much RAM you'd need for CAD software.  I upgraded mine to 32gb because I didn't want to find myself wishing I had more (for software development).  I think I only ever hit as high as 20gb used, and am usually around the 6-12gb mark (depends on how many VMs I have going).
    5. Sorry, I can't answer your video question.  I use the docking station with two monitors via DVI.  I haven't tried HDMI.
    Before you sell off the extra parts, make sure you don't need them for warranty coverage.  Warranty will only cover the system with original parts, so if you have to send in your system you would remove all custom parts and reinstall the originals.  I'm not sure about onsite service, if you have to revert your system or not to original specs.
    All comments I made above were in respect of Win7 Pro.  I have no idea if anything changes under Win8/8.1.
    Good luck!  I hope you enjoy your w530 as much as I do mine. 
    w530 i7-3820QM / 32GB Corsair Vengeance 1600 RAM / 256GB Plextor M3P SSD / Quadro K1000M

  • Newb setup question re: 500 cannot compile error

    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: -1 in the jsp file: null
    Generated servlet error:
    [javac] Compiling 1 source file
    This is on the default index.jsp page that installs with Apache Tomcat/4.1.18... at http://localhost:8080/index.jsp which maps to C:\Program Files\Apache Group\Tomcat 4.1\webapps\ROOT\index.jsp
    by now I have way too many java sdks installed...
    C:\Program Files\Java\j2re1.4.1_01
    C:\Program Files\Java\j2re1.4.0_03
    C:\j2sdk1.4.0_03
    C:\j2sdkee1.4
    The first one I tried got me the same error I am getting now.. and since I have tried different versions changing JAVA_HOME
    Right now..
    JAVA_HOME = C:\j2sdkee1.4
    CATALINA_HOME = C:\Program Files\Apache Group\Tomcat 4.1
    I have no idea what's going on here not having much experience in settting up web servers or java SDKs. But in order to learn the stuff I have planned to I need teh following to get up and running on Win2K.. any help is greatly appreciated.
    Java JDK 1.4.
    Tomcat servlet\JSP engine 4.0.1.
    MySQL database 3.23.46
    If I stick a standard html page in the tomcat root it will show just fine.. so I suspect the whole Java thing is buggin for some reason.
    Here's the full text of the returned error followed by the text of the index.jsp file
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: -1 in the jsp file: null
    Generated servlet error:
    [javac] Compiling 1 source file
         at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:130)
         at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:293)
         at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:340)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:352)
         at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:474)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:184)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
         at java.lang.Thread.run(Unknown Source)
    Apache Tomcat/4.1.18
    <!doctype html public "-//w3c//dtd html 4.0 transitional//en" "http://www.w3.org/TR/REC-html40/strict.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <title><%= application.getServerInfo() %></title>
    <style type="text/css">
    <!--
    body {
    color: #000000;
    background-color: #FFFFFF;
    font-family: Arial, "Times New Roman", Times;
    font-size: 16px;
    A:link {
    color: blue
    A:visited {
    color: blue
    td {
    color: #000000;
    font-family: Arial, "Times New Roman", Times;
    font-size: 16px;
    .code {
    color: #000000;
    font-family: "Courier New", Courier;
    font-size: 16px;
    -->
    </style>
    </head>
    <body>
    <!-- Header -->
    <table width="100%">
    <tr>
    <td align="left" width="130"><img src="tomcat.gif" height="92" width="130" border="0" alt="The Mighty Tomcat - MEOW!"></td>
    <td align="left" valign="top">
    <table>
    <tr><td align="left" valign="top"><b><%= application.getServerInfo() %></b></td></tr>
    </table>
    </td>
    <td align="right"><img src="jakarta-banner.gif" height="48" width="505" border="0" alt="The Jakarta Project"></td>
    </tr>
    </table>
    <br>
    <table>
    <tr>
    <!-- Table of Contents -->
    <td valign="top">
    <table width="100%" border="1" cellspacing="0" cellpadding="3" bordercolor="#000000">
    <tr>
    <td bgcolor="#D2A41C" bordercolor="#000000" align="left" nowrap>
    <font face="Verdana" size="+1"><i>Administration</i>      </font>
    </td>
    </tr>
    <tr>
    <td bgcolor="#FFDC75" bordercolor="#000000" nowrap>
    Tomcat Administration<br>
    Tomcat Manager<br>
    </td>
    </tr>
    </table>
    <br>
    <table width="100%" border="1" cellspacing="0" cellpadding="3" bordercolor="#000000">
    <tr>
    <td bgcolor="#D2A41C" bordercolor="#000000" align="left" nowrap>
    <font face="Verdana" size="+1"><i>Documentation</i>      </font>
    </td>
    </tr>
    <tr>
    <td bgcolor="#FFDC75" bordercolor="#000000" nowrap>
    Tomcat Documentation<br>
    </td>
    </tr>
    </table>
    <br>
    <table width="100%" border="1" cellspacing="0" cellpadding="3" bordercolor="#000000">
    <tr>
    <td bgcolor="#D2A41C" bordercolor="#000000" align="left" nowrap>
    <font face="Verdana" size="+1"><i>Tomcat Online</i>      </font>
    </td>
    </tr>
    <tr>
    <td bgcolor="#FFDC75" bordercolor="#000000" nowrap>
    Home Page<br>
    Bug Database<br>
    Users Mailing List<br>
    Developers Mailing List<br>
    IRC<br>
    </td>
    </tr>
    </table>
    <br>
    <table width="100%" border="1" cellspacing="0" cellpadding="3" bordercolor="#000000">
    <tr>
    <td bgcolor="#D2A41C" bordercolor="#000000" align="left" nowrap>
    <font face="Verdana" size="+1"><i>Examples</i>      </font>
    </td>
    </tr>
    <tr>
    <td bgcolor="#FFDC75" bordercolor="#000000" nowrap>
    JSP Examples<br>
    Servlet Examples<br>
    WebDAV capabilities<br>
    </td>
    </tr>
    </table>
    <br>
    <table width="100%" border="1" cellspacing="0" cellpadding="3" bordercolor="#000000">
    <tr>
    <td bgcolor="#D2A41C" bordercolor="#000000" align="left" nowrap>
    <font face="Verdana" size="+1"><i>Miscellaneous</i>      </font>
    </td>
    </tr>
    <tr>
    <td bgcolor="#FFDC75" bordercolor="#000000" nowrap>
    Sun's Java Server Pages Site<br>
    Sun's Servlet Site<br>
    </td>
    </tr>
    </table>
    </td>
    <td>     </td>
    <!-- Body -->
    <td align="left" valign="top">
    <p><center><b>If you're seeing this page via a web browser, it means you've setup Tomcat successfully. Congratulations!</b></center></p>
    <p>As you may have guessed by now, this is the default Tomcat home page. It can be found on the local filesystem at:
    <blockquote>
    <p class="code">$CATALINA_HOME/webapps/ROOT/index.html</p>
    </blockquote>
    </p>
    <p>where "$CATALINA_HOME" is the root of the Tomcat installation directory. If you're seeing this page, and you don't think you should be, then either you're either a user who has arrived at new installation of Tomcat, or you're an administrator who hasn't got his/her setup quite right. Providing the latter is the case, please refer to the Tomcat Documentation for more detailed setup and administration information than is found in the INSTALL file.</p>
    <p><b>NOTE: For security reasons, using the administration webapp
    is restricted to users with role "admin". The manager webapp
    is restricted to users with role "manager".</b>
    Users are defined in <code>$CATALINA_HOME/conf/tomcat-users.xml</code>.</p>
    <p>Included with this release are a host of sample Servlets and JSPs (with associated source code), extensive documentation (including the Servlet 2.3 and JSP 1.2 API JavaDoc), and an introductory guide to developing web applications.</p>
    <p>Tomcat mailing lists are available at the Jakarta project web site:</p>
    <ul>
    <li><b>[email protected]</b> for general questions related to configuring and using Tomcat</li>
    <li><b>[email protected]</b> for developers working on Tomcat</li>
    </ul>
    <p>Thanks for using Tomcat!</p>
    <p align="right"><font size=-1><img src="tomcat-power.gif" width="77" height="80"></font><br>
    <font size=-1>Copyright &copy; 1999-2002 Apache Software Foundation</font><br>
    <font size=-1>All Rights Reserved</font> <br>
     </p>
    <p align="right"> </p>
    </td>
    </tr>
    </table>
    </body>
    </html>

    I ended up uninstalling every java this and that.. and tomcat.
    Then installing only the j2sdk1.4.0_03 SDK.
    Then set up JAVA_HOME for all users and modified the path with full path to the bin (c:\j2sdk1.4.0_03\bin)
    Lastly I reinstalled tomcat and, voila, everything was working.
    It can be quite maddening when you THINK you did everything by the boook and something doesn't work. When you replied and confirmed that I was on the right track.. uninstalling and trying yet again became les frustrating an option.
    Thanks.
    BTW- I needed this env to do the projects in what sems to be a very interesting book.. "macromedia Flash MC application design and development" by Jessica Speigel .. published by New Riders.
    Her flash help website is at www.were-here.com.. the projects in the book are for flash-based multiplayer games and multi-user formums and such.

  • Ftp setup question

    sorry if this a repeat question, but i'm stumped. i've set up
    a number of sites previously, and never had a problem using the ftp
    with dw. my typical setup has been
    ftp host: ftp.mysite.com
    host directory: public_html/
    username
    password
    never a problem.
    now i'm trying to set up a site on a new dedicated server
    host and these same setting don't work. as an aside, i'm using
    cpanel and when i set up the ftp user i noticed the directory is
    /home/wwwcoun/public_html/, so i alternated this with a simple
    public_html/ but it didn't work. suggestions please. thanks.
    mike

    Try -
    FTP Host - www.mysite.com
    Host directory - BLANK
    Can you connect? If you can, tell me what FOLDER names you
    see on the
    remote folder list.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "hconnorjr" <[email protected]> wrote in
    message
    news:emvf4c$6cr$[email protected]..
    > sorry if this a repeat question, but i'm stumped. i've
    set up a number of
    > sites
    > previously, and never had a problem using the ftp with
    dw. my typical
    > setup has
    > been
    >
    > ftp host: ftp.mysite.com
    > host directory: public_html/
    > username
    > password
    >
    > never a problem.
    >
    > now i'm trying to set up a site on a new dedicated
    server host and these
    > same
    > setting don't work. as an aside, i'm using cpanel and
    when i set up the
    > ftp
    > user i noticed the directory is
    /home/wwwcoun/public_html/, so i
    > alternated
    > this with a simple public_html/ but it didn't work.
    suggestions please.
    > thanks.
    >
    > mike
    >
    >

  • 802.1x for user authentication setup questions

    Hi,
    I am fairly new to the 802.1x realm, I have read several documents on how the setup is accomplished and I was hoping someone could validate the setup I have in mind to make sure I am on the right page.  Any comments or assistance would be greatly appreciated, I do not have the infrastructure to test everything before hand.
    I have a remote site with a switch and router.  I want to authenticate users using their AD credentials. At the datacenter I will have ACS 5.2, a Windows 2008 enterprise server for AD service and CS service. I do not have the option to install an additional client on the PC like anyconnect, I need to use Windows OS supplicant without installing physcial certificates on the machine.
    - Within the CS service I will generate a certificate that will be imported by ACS.
    - I will activate ACS to integrate with AD
    - I do not want to insall certificates on the client machines so I will use PEAP w/ MSCHAPv2
    - The authenticating clients will be XP w/ SP3, I am hoping that a group policy can be created to enabed the wired service to start automatically and I will also need to add my CS/CA server as a trusted authority unless I purhcase a verisign certificate to be used. Correct? or will this need to be done when the desktop image is installed on the pc?
    Additional Questions:
    - With the setup I described above using MSCHAPv2 when the user boots the computer in the morning, hits ctrl+alt+delete and provides their AD credentials will this act as a single sign on? first authenticating them through 802.1x so the port is authorized and then authenticating them to the AD server? or will there be some type of pop up window that will appear before the ctrl+alt+delete window? making the user provide credentials twice (annoying)
    - Once the user is autheticated can I push an ACL down to the switch to enforce a set policy? or does this happen on the router?
    - Most of the documents I have read are related to L2 802.1x is there a  L3 option that includes the router that I should be looking at to  provide more features?
    - can anyone speak to their experience with the Windows OS supplicants? is the functionality flaky/clunky or if the backend is setup properly it works seamlessly?
    Sorry for the long winded post but I am kind of shooting in the dark without having the equipment to test with. Any help is appreciated!
    Thanks

    Thanks too you both for the responses.
    I have a few followup questions which I have added inline.
    Q:
    - With the setup I described above using MSCHAPv2 when the  user boots  the computer in the morning, hits ctrl+alt+delete and  provides their AD  credentials will this act as a single sign on? first  authenticating them  through 802.1x so the port is authorized and then  authenticating them  to the AD server? or will there be some type of pop  up window that will  appear before the ctrl+alt+delete window? making  the user provide  credentials twice (annoying)
    A:  If you select "Use windows credentials" it won't prompt you for credentials. so All automatic.
    However  note that it will only login AFTER you entered the credentials on the  logon page. So you won't have network connectivity for the initial  logon, so no login scripts this way.
    With your comments I am rethinking my approach, I am considering that if the company security policy will allow it I will do machine authentication only instead of user auth.   Obviously this is not as secure since a rogue user could change the local admin password and have access to the network.  But interms of simplicity and ease of use machine authentication provides a transparent authentication mechanism that should suffice.  I would just have to sell the solution to security. 
    There a few things I need to understand before persuing this.
    - will the machine be 802.1x authenticated and on the network before the  ctrl+alt+delete? so when user logs in the machine has passed 802.1x  already and has received ip from dhcp? this is my hope.
    - is peap/mschap still the supported protocol so no physical cert is required per machine? no EAP-TLS
    - is the machine profile on the AD server used for 802.1x verification/authentication? meaning ACS will pass off to AD to verify the machine is part of the domain? or do you have to create machine profiles in ACS?
    - I have read a few articles out there about issues with machine auth with clients using XP, perhaps this was related to previous serivce packs before SP3? there was mention of registery changes required etc.
    - is there a different supplicant offered by cisco that is more robust that would provide more stability or is the cisco supplicant cost money per user license or other etc.
    Again your feedback is invaluable as I do not have the physical equipment to test with.  Unfortunatly I have to propose a solution before actually testing something which I am not particularly fond of.
    Regards,
    Eric

  • Oracle 11gR2 RAC VM and SCAN and DNS and /etc/hosts (two) setup questions

    Hi,
    I am looking forward to setting up two Oracle 11gR2 RAC instances
    on my Oracle VM test machine.
    I plan on using the Oracle 11gR2 RAC VM template.
    I want the final Oracle 11gR2 RAC instances to have SCAN that uses DNS.
    The DNS will be pre-installed in the JeOS.
    My first simple question about the setup is the following.
    In my DNS name file, for example,
    /var/named/chroot/var/named/milkyway.univ.db
    do I need to provide the racnode1 and racnode2 information,
    for example,
    # DNS name file (snippet)
    myjeos IN A 192.168.1.150
    racnode1 IN A 192.168.1.161
    racnode1-vip IN A 192.168.1.163
    racnode2 IN A 192.168.1.162
    racnode2-vip IN A 192.168.1.164
    rac-scan IN A 192.168.1.131
    rac-scan IN A 192.168.1.132
    rac-scan IN A 192.168.1.133
    Or, can I just provide only the rac-scan information
    # DNS name file alternate (snippet)
    myjeos IN A 192.168.1.150
    rac-scan IN A 192.168.1.131
    rac-scan IN A 192.168.1.132
    rac-scan IN A 192.168.1.133
    What I am getting at is the following.
    Within the install process, will racnode1, racnode1-vip, racnode2,
    and racnode2-vip host names and their IP address be written
    to the RAC instances /etc/hosts files? (So I should not bother
    to put them in the DNS name file like '# DNS name file alternate (snippet)'?)
    Or, should I put the racnode and racnode-vip host names and IP addresses
    in the DNS name file like '# DNS name file (snippet)'?
    The second question is the following.
    Are the cluster name and the scan name allowed to be different?
    Currently, I would plan them to be different,
    for example, rac-cluster and rac-scan.
    Or, are they required to be the same,
    for example, rac-cluster and rac-cluster.
    Thank you.
    AIM

    AIM wrote:
    do I need to provide the racnode1 and racnode2 information,
    Or, can I just provide only the rac-scan information You need to provide all of it in DNS, because other hosts in your network will need to be able to resolve all of the normal, VIP and SCAN addresses for your RAC nodes. We write this data out to /etc/hosts just to reduce the amount of round-trip DNS requests the cluster nodes make for themselves.
    Are the cluster name and the scan name allowed to be different?They can be different.

  • B2B 11G questions

    Hi B2BGurus,
    Can anyone explain us with below questions, Here i am giving our scenario and my questions
    Scenarion:
    Div A FTP-> SOA-->B2B OutboundCoustome queue ---> B2B---->Http or HTTPs(AS2) or FTP(As2)
    Div B FTP-> SOA-->B2B OutboundCoustome queue ---->B2B---->Http or HTTPs(AS2) or FTP(As2)
    Div C FTP-> SOA-->B2B OutboundCoustome queue ---- B2B---->Http or HTTPs(AS2) or FTP(As2)
    Div D FTP-> SOA-->B2B OutboundCoustome queue ---->B2B---->Http or HTTPs(AS2) or FTP(As2)
    Explanantion of scenarion:
    1.     Division people places the files in FTP
    2.     Soa picks it up, do the transformation and places the file in B2B outbound custom queue
    3.     B2B server picks it up from B2B outbound custom queue and converts it into native EDI and sends it to trading partner using AS2
    Questions:
    1.     My idea is --for each trading partner planning to create two different queues (one is for outbound and another one is inbound), is it suggestible of creating a n number of custom queues?
    2.     If we creating a custom queues which is suggestible( either JMS custom queues or AQ custom queues)
    3.     If any transaction was error out, to which queues the transaction will go? And how can we find that transaction in database.
    4.     How the 850 transaction and 997 transactions will co-relate, on what basis B2B will check?
    5.     We sent one transaction to supplier and we received a –ve MDN, How can we see that –ve MDN and how we will recognize it
    6.     Are there any different or separate error queues in Oracle B2B?
    7.     What are the important B2B tables in 11G
    8.     In B2B_Instancemessage table we have ID and B2B messageId, Could you please tell us what is the use of this?
    Regards
    cnu

    Hi cnu,
    Http or HTTPs(AS2) or FTP(As2)AS2 supports HTTP/HTTPS only. FTP is not supported as part of AS2.
    1. My idea is --for each trading partner planning to create two different queues (one is for outbound and another one is inbound), is it suggestible of creating a n number of custom queues? It makes sense, specially from maintenance perspective.
    2. If we creating a custom queues which is suggestible( either JMS custom queues or AQ custom queues)Depending upon use case and design you may use either of AQ/JMS but JMS may be preferred for tight performance requirement use cases. (my personal opinion)
    3. If any transaction was error out, to which queues the transaction will go? And how can we find that transaction in database.By default, exception queue is IP_IN_QUEUE (AQ), but you may configure custom JMS exception/error queues. Please refer -
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/app_except.htm#BCEIEEFF
    4. How the 850 transaction and 997 transactions will co-relate, on what basis B2B will check?Please refer -
    How 850 matches with corresponding 997
    5. We sent one transaction to supplier and we received a –ve MDN, How can we see that –ve MDN and how we will recognize itOn reports console you may see negative MDN's. Please refer "Inbound Exception Handling Scenarios" -
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/app_except.htm#BCEIEEFF
    6. Are there any different or separate error queues in Oracle B2B?No. By default IP_IN_QUEUE is the error queue.
    7. What are the important B2B tables in 11G
    B2B tables
    Information required about B2B transaction tables in 11g
    It's not recommended to access tables directly. Use InstanceMessageAPI -
    http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/b2b_api_imsg.htm#BABFEFCD
    8. In B2B_Instancemessage table we have ID and B2B messageId, Could you please tell us what is the use of this?ID is the unique identifier for the particular table. B2B messageId is actually the unique identifier for a message and used for correlation between requests and response.
    Regards,
    Anuj

  • XBR-75X940C setup question.

    I recently purchased a 940C and I am wondering about setup. I have a new Pioneer Elite SC-91 receiver I am using with the TV and it is HDCP 2.2 compliant. I am running a Sony 4k media player, DirecTV and Apple TV into the receiver via HDMI and then another single HDMI to the Sony 940C. My question is which HDMI input on the TV should I use? I want to be able to make sure I can send sound from the TV Apps to my receiver. Thanks.

    HDMI4/ARC input. I have the more or less the same setup, except for the sony media player. Make sure you use a HDMI 2.0 cable from your receiver to the TV. You will also have to do a HDMI sync on your receiver. Unplug the receiver after all connections are complete, keep the TV on.

  • DMVPN w/ Multicasting setup/questions

    Hello
    I have a lot of questions, so bare with me as i puke them out of my head.
    I have been doing some testing with DMVPN inconjuction with multicasting video (Hub and spoke, w/ no spoke to spoke). The test setup is using 2 cisco 2811 w/out the vpn module.  I understand the performance hit with not having the module. With that being said here are my questions.
    1. With encryption on both the HUB and spoke routers are using 90-97% cpu (8Mb multicast stream).  With encryption off, the Hub is around 60%, and spoke around 75%.  Here is where i'm confused.  If i send that same stream as a unicast stream, w/ encryption on, both the Hub and spoke are only using around 30-35% cpu.  Why is there so much more cpu need when its a multicast stream?
    2. In the current config i'm seeing input, throttles, and ignore errors on the Hub and spoke.  The Hub has these errors on the LAN interface, and the spoke has these errors on the WAN interface. All other interfaces are totally clean.  I have checked and there are no duplex or speed mismatches.  Any ideas?
    HUB:
    Current configuration : 1837 bytes
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Hub
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    enable password
    no aaa new-model
    clock timezone Central -6
    dot11 syslog
    ip source-route
    ip cef
    no ip domain lookup
    ip name-server 8.8.8.8
    ip multicast-routing
    no ipv6 cef
    multilink bundle-name authenticated
    voice-card 0
    archive
    log config
      hidekeys
    interface Tunnel1
    bandwidth 100000
    ip address 192.168.11.1 255.255.255.0
    no ip redirects
    ip mtu 1400
    no ip next-hop-self eigrp 1
    ip pim sparse-mode
    ip nhrp map multicast dynamic
    ip nhrp network-id 1
    ip nhrp holdtime 450
    no ip route-cache cef
    ip tcp adjust-mss 1360
    no ip split-horizon eigrp 1
    delay 1000
    tunnel source FastEthernet0/0
    tunnel mode gre multipoint
    tunnel key 100000
    tunnel bandwidth transmit 100000
    tunnel bandwidth receive 100000
    interface FastEthernet0/0 (WAN)
    ip address 216.x.x.x 255.255.255.192
    ip pim sparse-mode
    load-interval 30
    duplex auto
    speed auto
    interface FastEthernet0/1 (LAN)
    ip address 128.112.64.5 255.255.248.0
    ip pim sparse-mode
    load-interval 30
    duplex auto
    speed auto
    router eigrp 1
    network 128.112.0.0
    network 192.168.11.0
    auto-summary
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 216.x.x.x
    ip http server
    ip http authentication local
    ip http secure-server
    ip pim rp-address 128.112.64.5 10
    access-list 10 permit 239.10.0.0 0.0.255.255
    snmp-server community public RO
    Spoke:
    Current configuration : 1857 bytes
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Spoke
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    enable password
    no aaa new-model
    clock timezone central -6
    dot11 syslog
    ip source-route
    ip cef
    no ip domain lookup
    ip multicast-routing
    no ipv6 cef
    multilink bundle-name authenticated
    voice-card 0
    archive
    log config
      hidekeys
    interface Tunnel1
    bandwidth 100000
    ip address 192.168.11.2 255.255.255.0
    no ip redirects
    ip mtu 1400
    ip pim sparse-mode
    ip nhrp map 192.168.11.1 216.x.x.x
    ip nhrp map multicast 216.x.x.x
    ip nhrp network-id 1
    ip nhrp holdtime 450
    ip nhrp nhs 192.168.11.1
    no ip route-cache cef
    ip tcp adjust-mss 1360
    no ip split-horizon eigrp 1
    delay 1000
    tunnel source FastEthernet0/0
    tunnel destination 216.x.x.x
    tunnel key 100000
    tunnel bandwidth transmit 100000
    tunnel bandwidth receive 100000
    interface FastEthernet0/0 (WAN)
    ip address 65.x.x.x 255.255.255.192
    ip pim sparse-mode
    load-interval 30
    duplex auto
    speed auto
    interface FastEthernet0/1  (LAN)
    ip address 128.124.64.1 255.255.248.0
    ip pim sparse-mode
    ip igmp join-group 239.10.10.10
    load-interval 30
    duplex auto
    speed auto
    router eigrp 1
    network 128.124.0.0
    network 192.168.11.0
    auto-summary
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 65.x.x.x
    no ip http server
    no ip http secure-server
    ip pim rp-address 128.112.64.5 10
    access-list 10 permit 239.10.0.0 0.0.255.255
    snmp-server community public RO

    Joe,
    You ask the right question.
    CPU ultization = CPU consumed by processes + IO operations (in a huge simplification - CEF) 
    Typically when a packet is processed by router we expect it to be be processed by CEF, i.e. very fast.
    Packet is not processed by CEF:
    - when there is something missing to route the packet properly (think missing ARP/CAM entry) i.e. additional lookup needs to be done.
    - a feature requests that a packet is for processing/mangling
    - Packet is destined to the router
    (And several other, but those are the major ones).
    When a packet is recived, but cannot be processed by CEF, we "punt the packet to CPU" this in turn will cause the CPU for processes to go up.
    Now on the spoke this seems to be the problem:
    Spoke#show ip cef switching stati       Reason                          Drop       Punt  Punt2HostRP LES Packet destined for us             0       1723          0RP LES Encapsulation resource             0    1068275          0
    There were also some failures on one of the buffer outputs you've attached.
    Typically at this stage I would suggest:
    1) "Upgrade" the device to 15.0(1)M6 or 12.4(15)T (latest image in this branch) and check if the problem persists there.
    2) If it does, swing it by TAC. I don't see any obvious mistakes, but I'm just a guy in a chair same as you ;-)
    Marcin

  • 3-Drive/4-Drive RAID setup questions

    I'm contemplating purchasing a new 8-core Mac Pro. I understand RAID but I'm not an expert. That said, I'm thinking of doing one of the following but I don't know if both are doable:
    One setup is 1 hard drive for Mac OS X, and 3 RAID drives for the video capture (3TB total RAID 0 Seagate 7200rpm drives).
    Or, my question, can I just RAID 0 all 4 drives together and then create a partition for Mac OS X? It seems like this would give A LOT faster bootable drive, plus the benefits of seperating the media storage from the operating system.
    The reason I ask now is this makes a difference in my purchase decision. If I can RAID all 4 drives together, do they all have to be the same capacity for RAID 0? If not, I'll just get a standalone 320GB drive for the OS, and RAID the other three 1TB drives together.
    Last question, would it help to use a dedicated RAID card like the CalDigit card (or Apple card) instead of software RAIDing within Mac OS X?
    Thanks in advance.

    First off - DO NOT put your system on your capture RAID. No no no. bad bad bad.
    Yes you can RAID your other three drives into a RAID 0 configuration using Disk Utility. All drives should be the same size. Recognize two things with this setup --
    1. If your system crashes, you loose the RAID partition as it is created and maintained through system software.
    2. If you loose one of the three drives, you loose all the information on all three drives.
    A more secure way to go is with a hardware RAID controller. Apple sells one with the MacPros and Caldigit has one as well.
    With the Caldigit you can set up the 3 drives as a RAID 5 which will give you data security. I'm not sure what RAID configurations beyond 0 the Apple card supports.
    Good luck.
    x

Maybe you are looking for

  • Cant attach multiple files in mail

    How to attach multiple files in mail?? 

  • Nano or shuffle as data storage

    i would like to transfer digital photos on to a nano or shuffle while i am in the field(away from computer). can i transfer photos via a mini usb plug from camera to ipod device. . if not what are the options for transfering photo files from camera t

  • XML Transformation error (ABAP -- XML)

    Hi, I'm getting the foll. error while doing a XML Transformation, Can anyone help me in this regard..   <FIN_WT>56.0</FIN_WT>   <FIN_WT_UNIT>KG</FIN_WT_UNIT>   <ZZQMNUM />   <ZZHOLD />   <ZZDUMATNR The XML page cannot be displayed Cannot view XML inp

  • Lion kills SoundTrack Pro, DVD Studio Pro and Color

    After installing Lion on my cloned boot drive FCP 7.0.3 runs but SoundTrack pro, DVD Studio Pro and Color return an error message indicating Lion can't run PowerPC programs. They also have a white slashed circle over them indicating they aren't compa

  • Nikon D810 9mp raw files won't open

    Apple released an RAW update for Nikon D810 cameras. How long until the 9MB RAW files have an update?