B2B user registration in ICSS

Hi,
Currently in the ICSS when registering on the B2C site, the registered user is assigned the reference user in the system as standard. However on the ICSS B2B site the registered user is not assigned the reference user as standard. Also when the B2B registered company is created it is not created with the role 'Sold-to party' and there is no where in the configuration (IMG) where you can make this setting. Therefore our B2B registered users are not being replicated back into R/3.
We need the registered B2B organisations and contact persons to be replicated back into R/3. The B2C registered users are being replicated back into R/3.
I was wondering whether anyone has come across this issue and any help would be much appreciated.
Regards
JoJo

Hello Sarangamath,
Would it be possible to get some furhter information on the Business process that you are folloing. From your reply I see that you are using the ICSS_B2B scenarion but in this case there is no registration page for users, this is available in the ICSS_B2C scenario.
Typically the useradmin for the B2B users can be done in a few different methods.
1. In the isauseradm application,
2. Through transaction BP or Web UI.
Regards
Mark

Similar Messages

IStore - B2B users registration by iStore administrator

How can a iStore/CRM HTML administrator register new customer user/administrator?
We are now in R12.
In 11.5.9, via CRM HTML responsibility, we had to do the following steps in order to setup a new user account:
1/ Find the organziation and create the contact
2/ During contact creation process, there was a radio button to make the contact iStore user
3/ Enter name, contact info, user name and password for the new user.
4/ AFter the new user is created by CRM HTML Administrator, user receives email notification with username and password
5/ When new user attempts to login to the store using the login credential from the email, user will be prompted change password page
Do we have a similar functionality in R12?
If not, what is the alternate solution? no customization please
Just to be clear, basically we do not want the customers to have the ability to self-register. Therfore, sales organization would want to have complete control over the user registration.
Appreciate your help on this.
many thanks..

Thanks

IStore B2B user management - Remove user

Hi All,
I have the following set up at my instance for iStore-
- The user registration type that access iStore is B2B
- I have a primary user for each organization that access the store.
- This primary user can has the IBE_USER_ADMIN privelege which allows it to create more user.
I want to give this primary user the privelege to Remove the user also.
Hope I am clear in my requirement Any help in this regard is appreciated.
Regards
Deepak

Hello Ashish,
For Business Users (B2B) there are the following roles:
IBE_BUSINESS_USER_ROLE non-administrative business user
IBE_PRIMARY_USER_ROLE administrative (primary) users
You can reference details in the iStore documentation link for the roles assigned to the seeded user types -
Site Management User Type Definitions
Here is the documentation link for details on the seeded permissions assigned to the roles -
Oracle iStore B2B User Permissions
Regards,
Debbie

How to authenticate userid and password of b2b user in a b2c portal

I am having a reqirement in B2C web portal , where in i have to create two input text fields which will accept userid and password ( the userid and password will be of b2b users)and button to logon and if i click on the logon button, it should take into b2b web portal. Is it possible? if possible please help me in this issue.
Please get back to me if i am not clear in my requirement.
Thanks a lot in advance!
lakshman reddy G.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Oct 6, 2008 6:07 PM

To get an idea check these links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/aaa1a890-0201-0010-eb93-ae3d2bb74a78
BSP/HowTo - Customizing the design of System Logon page in NetWeaver '04
-Aman

Auto Approval of Self User Registration Fails OIM 11g R2

Use Case : Auto Approval of Self User Registration
Steps followed
1. A New Approval Policy created with Auto Approval flag set as True for Request Level Approval.
2. A New Approval Policy created with Auto Approval flag set as True for Operation Level Approval.
3. The field Organization was pre populated using the Pre Population Adapter, as mentioned below.
+<AttributeReference name="Organization" attr-ref="act_key" type="Long" widget="ENTITY" length="256" required="false" available-in-bulk="false" entity-type="ORGANIZATION">+
+<PrePopulationAdapter name="OrgPrepopulateAdapter" classname="com.plugin.OrgPrepopulateAdapter"/>+
+</AttributeReference>+
4. A new user was created using the "Register New user" Link.
5. Log in as System Adminstration and under Track requests, found that the New request has failed.
6. On click of Request link, the request details shows the Organization field has populated with the expected value.
7. The Logs suggests that the Request failed due to Organization field going Null.
LOG
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown Index: 0, Size: 0[[
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:547)
     at java.util.ArrayList.get(ArrayList.java:322)
     at oracle.iam.requestactions.approval.operationlevel.OrgBasedMethodology.getOrgDetails(OrgBasedMethodology.java:215)
-------------

Use Case : Auto Approval of Self User Registration
Steps followed
1. A New Approval Policy created with Auto Approval flag set as True for Request Level Approval.
2. A New Approval Policy created with Auto Approval flag set as True for Operation Level Approval.
3. The field Organization was pre populated using the Pre Population Adapter, as mentioned below.
+<AttributeReference name="Organization" attr-ref="act_key" type="Long" widget="ENTITY" length="256" required="false" available-in-bulk="false" entity-type="ORGANIZATION">+
+<PrePopulationAdapter name="OrgPrepopulateAdapter" classname="com.plugin.OrgPrepopulateAdapter"/>+
+</AttributeReference>+
4. A new user was created using the "Register New user" Link.
5. Log in as System Adminstration and under Track requests, found that the New request has failed.
6. On click of Request link, the request details shows the Organization field has populated with the expected value.
7. The Logs suggests that the Request failed due to Organization field going Null.
LOG
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown Index: 0, Size: 0[[
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:547)
     at java.util.ArrayList.get(ArrayList.java:322)
     at oracle.iam.requestactions.approval.operationlevel.OrgBasedMethodology.getOrgDetails(OrgBasedMethodology.java:215)
-------------

Query : Addition of extra fields in the User Registration page of portal.

Hi All,
I have a query, about adding extra fields in the new user registration page of portal.
If you can suggest the required source files in details,inorder to incorporate two more fields.
Say, AGE and COMPANY,with the existing fields in the same page.
Along with this,can you please send the details of retrieving those information from backend and the backend functionalities associated with the SUBMIT button on the registration page.
Regards,
Sudeep

Hi,
Your query is divided into two parts.
The first part is adding new fields into existing form. This feature comes under Branding of portal. Plz use the link below understanding the same and related help :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/affe402a5ff223e10000000a155106/frameset.htm
The second part is retrieving the values from backend.Here it will be the UME database. You need to develop a logon.par file and replace the same in your portal.
Happy Customizing.
Sukanta Rudra

Self user registration request fails during Approval.

Hi,
My case is explained below.
I have created a new user using "New User Registration" in the sign in page.
Now the user is created in OID.
I logged into identity manager using "xelsysadm" user.
I clicked "Track Requests" and search, I could see the new request with status "Pending request approval"
I clicked on "Pending Approvals", selected the request and click on "Approve"
I get a success message. However the user is not getting created in OIM.
Here the user is getting deleted from OID also.
I could not find any forum page discussing this issue. Anyone good in 11gr2 kindly help.
I get the following error in the logs.
[2013-01-31T16:51:17.884+05:30] [oim_server1] [WARNING] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: e171ff3c1743d36a:75a03544:13c9008be1d:-8000-0000000000000642,1:27414:13] [WEBSERVICE_PORT.name: CallbackServicePort] [APP: oim#11.1.2.0.0] [J2EE_MODULE.name: workflowservice] [WEBSERVICE.name: CallbackService] [J2EE_APP.name: oim_11.1.2.0.0] Exception :[[
oracle.iam.request.exception.RequestServiceException: An error occurred while completing approval process instance 8d7d6216-fcbe-48b1-90a5-dce34b3b8492. The corresponding error message is Index: 0, Size: 0.
     at oracle.iam.request.impl.ApprovalManager.approvalInstanceComplete(ApprovalManager.java:255)
     at oracle.iam.request.impl.ApprovalPolicyServiceImpl.updateApprovalResult(ApprovalPolicyServiceImpl.java:52)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy811.updateApprovalResult(Unknown Source)
     at oracle.iam.request.api.ApprovalPolicyServiceEJB.updateApprovalResultx(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

Okay, here are the detailed steps to update it.
Click on track requests and search or your request
Click on your request number then it will open request details form.
This form will have two tabs request details and approval details.
Click on approval details tab.
Click on row#1.
As soon as you click on row #1, it will show you a history down to that row # 1 details. Here you will see sequestnce #, stage1, participant name, participant action etc.
Click on participant name for ex. xelsysadm.
As soon as you click on xelsysadm, view snapshot button will be enabled.
Click on view snapshot button.
Now, it will will show you a detailed request details form which will have two tabs request details and approval details.
Click on request details tab. Here you can update organization name. and you will see update button as well. Click on update button after updating org name.
Now, go to pending approvals and approve your request.

Jumpstart: Disable user registration in Solaris 10 x86 8/07

Earlier Solaris version let you disable the user registration screen by adding DISABLE=1 to /etc/default/solregis or not installing SUNWsregu. That doesn't work with Solaris 10 x86 8/07. There is no SUNWsregu package.
Can this still be disabled?

Confirmed: I just jumpstarted with Solaris 10 x86 (10/09) AKA Update 8, and touched the .nvreg file into existence with a finish script. The system no longer prompts to register at first login.
Finish script code snipit:
if [ -d ${BASEDIR}/usr/lib/breg/data ]; then
touch ${BASEDIR}/usr/lib/breg/data/.nvreg
fi

Can I create a User Registration System in Adobe Muse?

Hello community!
I was wondering if I can create a User Registration System in Adobe Muse? I do NOT use Dreamweaver, and I know Dreamweaver can do it. I am not a coder, but there are plenty of tutorials online for me to follow step-by-step. I just can't seem to find anything for Muse.
Since Muse has Insert HTML, I was wondering if anyone has figured out a way to create a User Login and Password protected page.
Thanks!
Joe~

Hi,
There are multiple threads in this issues
Login page using Muse and BC
Re: Is there a way to make private (members only) areas through muse?
Re: Can I create a login/password protection in Muse for a HTML5 page or two?
How do I create a password protected entrance page for a muse site?
Do let me know if you have questions further.

User Registration Process: Task Assingment for a Self-Request User

Hi guys,
Doubt: In the User Registration Process Can I configure the Target User's Manager as the Assignee of the Awaiting Approval Data? I understood that I can do that because the user has not been created yet. Does it make sense? I need to send the approval to the user's manager and he/she will be responsible to complement the user info.
Scneario: In the User Registration Process, that Awaiting Approval Data has been configured with a Task Assignement Adapter. This adapter reads the Manager Login in the request info and sets this values as the "Adapter return value for key". Also, the adapter has another task that sets the "Adapter return value for key type". The adapter is working ok.
Problem: When the adapter is run, OIM outputs a message that says adapter was run. I don't know why, but OIM runs the adapter many times, where it should run once. Also, the task is been assigned to the SelfREg user.
What do I have to do to get my task assignment adapter working as expected?
Thanks,

Yeap. Sorry! I've searched for my problem but I haven't seen that post.
More problems with hard-coded-based development of OIM. A process must be a process, a task must be a task, a form must be a form etc. A product like OIM can not have internals and hard-coded instructions. And dont have statements like: If the object is something of OIM, don't allow this and that; else, allows the user do whatever :-)
Thanks kevin.

Facing issue on request submission from Self user registration with workflow.

HI Everyone,
We have a use case where in User Registration process has a two stage workflow.
In the first stage approver(Common admin) would open the request and approve it updating the organization to which the user belongs to and the the work flow should be routed to the selected organization admin in the second stage based on the org selected in the first level of approval.
For this we have devloped a workflow and applied the same and now facing the issue once the request moves to Second level for approval.
Request gets failed.
Below is the exception found on clicking Request status from Track Requests.
Can you kindly let me know any possible resolution to resolve this.

Error log :
IAM-2050126 : Invalid outcome com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}runtimeFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>oracle/iam/platform/OIMClient</summary> ,detail=<detail>java.lang.NoClassDefFoundError: oracle/iam/platform/OIMClient
at orabpel.approvalprocess.ExecLetBxExe0.execute(ExecLetBxExe0.java:195)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELxExecWMP.__executeStatements(BPELxExecWMP.java:47)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:173)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2718)
at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1197)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1100)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:76)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:251)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:330)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4652)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4583)
at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:714)
at com.collaxa.cube.engine.CubeEngineSecurityManager$2.run(CubeEngineSecurityManager.java:101)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:74)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity$ActionExecutorWrapper.execute(AbstractSubjectSecurity.java:242)
at oracle.security.jps.internal.jaas.CascadeActionExecutor$SubjectPrivilegedExceptionAction.run(CascadeActionExecutor.java:83)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.security.Security.runAs(Security.java:61)
at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:51)
at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:56)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity$ActionExecutorWrapper.execute(AbstractSubjectSecurity.java:242)
at com.collaxa.cube.engine.CubeEngineSecurityManager.performActionAsSubject(CubeEngineSecurityManager.java:79)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:555)
at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:531)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:319)
at sun.reflect.GeneratedMethodAccessor4136.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.oracle.pitchfork.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:103)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:113)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:100)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:154)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:113)
at sun.reflect.GeneratedMethodAccessor1077.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.oracle.pitchfork.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:68)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at com.sun.proxy.$Proxy330.handleInvoke(Unknown Source)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:30)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:89)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:65)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at com.collaxa.cube.engine.dispatch.Dispatcher$ContextCapturingThreadFactory$2.run(Dispatcher.java:933)
at java.lang.Thread.run(Thread.java:745) </detail> ,code=<code>java.lang.NoClassDefFoundError</code>} cause: {oracle/iam/platform/OIMClient} received from SOA for the request id 214.

Good Model for Web Self-service User registration ?

Trying to build a web self-service user registration module.
9iAS documentation says 9iAS uses JAZNUserManager that uses jazn-data.xml.
I like jazn-data.xml because the password is encrypted and works with j_security_check with minimal coding, just need to make entries in web.xml.
Is this a good model, ie storing web users in jazn-data.xml ?
Thanks in advance

You should have a kind of auto-enrollment feature on Sharepoint side where, based on a menu selection, the user will be able to enroll himself and his account will be moved to an OU or added to groups based on the provided details. The problem with this
is that this is usually the source of duplicated user accounts in AD and it is not easy to apply a kind of control on how users should enroll themselves only one time and also hard to manage and cleanup later.
You can ask them in Sharepoint forums for more details:
http://social.technet.microsoft.com/Forums/en-US/category/sharepoint
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

User registration email notice

I am trying to get this working in our user registration form in portal where user will only get an email when she is approved or denied by our USER admin team BUT not when he first register at PORTAl.
Right now user register himself on portal and he gets an email that his account is created. This new id comes in the PORTAL User notice tab where admin will approve or reject him.
What i am trying to achieve is stop that first email which goes when user get resgiter but receive only a final email when his account is approved or rejected.
I tried to change these property in config tool
==============================================================
As per the Link. I have set these value
ume.notification.selfreg_performed = FALSE
ume.notification.create_approval = TRUE
ume.notification.create_denied = TRUE
and
and on the portal page under TAB>SYSTEM ADMIN>SYSTEM CONFIG>UME
CONFIG?NOTIFICATION EMAIL these are all checked.
-Send E-Mail on Following Events:
Administrator creates new user (->user)
User requests new password (-> user)
Administrator changes password (-> user)
Administrator locks user account (-> user)
Administrator unlocks user account (-> user)
Administrator deletes user account (-> user)
Import function creates new user (-> user)
Import function updates user (-> user)
===============================================================================
But this totally stop the email from coming . Looking by the property name it looks like they should make this change happen but it not. Can some one suggest what else can be done to achieve this.

Hi,
Uncheck the UME property 'Administrator creates new user.'
Portal User Notice tab must be customized. Look for its code, and use javax.mail.internet.MimeMessage to send the final mail on click of accept or reject button.
Regards,
Atul

Business catalyst user registration

How does one setup (is it even possible) to set up two factor user registration in Business Catalyst.
i.e. The users registers and is sent an email with a link to validate that the user is using a valid email address.

Should not be the case.
The Email is the primary identify, if you are using the proper email field and not a custom field BC will only add the form data to a single CRM entry. You wont find there are multiple customers in the CRM with the same email.
A user can always fill in the same form, and new cases attached to them. There is no system email check on the field itself at this time. You just need to design how your site and registration flow works so people know not to keep registering.

After updating to Firefox 18.0.1, I am getting a "User Registration" page. What is this?

When I open Mozilla, I get two windows. The one on top is identified as "User Registration"; it is blank except for the line, "%brandDTD; %browserDTD; %baseMenuDTD; %charsetDTD; %textcontextDTD; %customizeToolbarDTD; %placesDTD; %safebrowsingDTD; %aboutHomeDTD; %debuggerDTD; ]>", at the top. If I close that page, my usual home page is right behind it. It is apparently causing no actual problems, but is disconcerting. What is this page, is it asking me to do something (if so, what), and, if not, is there a way to stop it from appearing?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

B2B user registration in ICSS

Similar Messages

Maybe you are looking for