B2C web shop - change/remove the 302 redirects for google search

Hi All,
We are making our webshop (http://hamperking.com.au) search engine friendly and implimenting a number of SEO recommendations.  One of these recommendation requires the removal of the "works as designed" 302 redirects (temporary) in our CRM 2007 shop.  Or atleast change them to 301 redirects (permenant).  As the 302 redirects are temporary, google will not give them priority.
Can anyone point me into the right direction as to the SC and DC where is config is made?
Cheers,
Vic

I can not answer your direct question, but am curious as to why you are not using the [Web Crawler|https://service.sap.com/sap/support/notes/1128832] to accomplish this or perhaps you were unaware of it?

Similar Messages

  • How to change the browser used for Google search from context menu of selected text?

    How to change the browser used for Google search from context menu of selected text?
    It uses Safari. But I want to use Chrome (it's my default browser).

    How to change the browser used for Google search from context menu of selected text?
    It uses Safari. But I want to use Chrome (it's my default browser).

  • I want to know why you have changed from the very simple, uncluttered google search box to this awful, busy front page? If this continues I will probably go to Internet Explorer although there's is almost as 'busy'.

    We used to get, when clicking on Mozilla, a simple box (Google) with a space to put the subject you wanted searched. Simple and uncluttered. I went to Mozilla because of this, as Internet Explorer was messy and cluttered. Imagine my dismay when I find Mozilla has gone the same way!!! I do not want 'Alot' as the homepage for searches, nor do I want all the crazy advertising, etc. - I just want the simple, uncluttered box back but do not know how to achieve this.

    I have sad and urgent news for you, Mozilla has not gone this way - it is still the simple box for the rest of us.
    '''You are infected with Malware that profits from those adverts'''

  • Error while opening the B2C Web Shop

    Hi All,
    Our Basis team has installed the JAVA Stack for CRM 7.0 EHP1. We can successfully open the XCM page for the web shop using the following URL: http://host:port/b2c/admin/xcm/init.do.
    We get a SAP E-Commerce Error page when we try to launch the B2C Web Shop using the following URL:
    http://host:port/b2c/b2c/init.do. The following error messages are shown along with a "Log On" button:
    An application error occurred
    A serious system error has occurred
    The shoplist read from buffer is empty
    Contact the administrator
    Log on
    I have created the Internet B2C Users& specific roles and also done the XCM Configurations (New customer configuration, General Settings & JCO Component created). Restarted the Java Application. However we still get the same error page while launching the web shop. Please help us to rectify this error.
    Also I get a blank-white page when I try to open this URL for maintaining a B2C Shop: http://host:port/shopadmin/shopadmin/init.do?configuration.xcm=Z_MY_SCENARIO
    I can successfully open the URL for SHOPADMIN XCM: http://host:port/shopadmin/admin/xcm/init.do
    Please help us to resolve the issue. How can we maintain the SHOP? Have we missed some configurations?
    Thanks !

    I am not able to open the shopadmin URL for defining a new B2C web shop. This URL does not work : http://host:port/shopadmin/shopadmin/init.do?configuration.xcm=ZMY_SCENARIO. I just get a white blank page.
    I can open the XCM for shopadmin using teh URL: http://host:port/shopadmin/admin/xcm/init.do.
    Thanks.

  • Production B2C web shop sites

    Hi all,
      I was looking to see if anyone could give me a URL of an existing B2C web shop that I can look at to see the software package in action. So far the demo sites that I have looked at have been extremely slow. Our e-commerce sites are currently in .net, and we would like to move to the web shop application, but what we have seen so far has been very disappointing performance-wise compared to our existing applications. We are currently migrating from a custom ERP to SAP and looking to convert four e-commerce sites to a CRM E-Commerce/Enterpirse Portal solution. Thanks.
    Dave Gramenz

    Here's a couple I know of:
    Sylvania's B2C - http://ecom.mysylvania.com/sylvaniab2c/b2c/z_login.do
    Sony Euro's B2C - https://shop.sonystyle-europe.com/SonyStyle/b2c/catalogForward/(xcm=PCM_b2ccrmstandard&layout=15_108_60_47_109_113&uiarea=0&Z_CONTEXT_RECOMM_TYPE=recommendations&ctype=areaDetails&carea=%24ROOT)/.do?catalogEntry=true

  • Pricing Totals not appearing in B2C web shop

    Hello All,
    We are using list prices in product catalog and in B2C  web shop.
    We are unable to see the pricing totals in the save order screen.The pricing totals and prices are appearing in in the back end(SAP GUI).
    Could any one suggest where do we have to make the necessary settings?
    Thanks in advance,
    Sastri

    Dear Yanamandra,
    If you are using list price your gross total also will be the same as list price.
    And for this you have to switch off the IPC in XCM settings and have to replicate the catalog properly in TREX server.
    Otherwise if you are using a customer pricing procedure to calculate the prices and there are other additional prices which have to be added to the list price at the time of pricing.
    Then you should activate the IPC and also your VMC should be active in the CRM s/m, and also if you are using any customized user exit that also  should be implemented.
    hope this clarifies your doubt.
    Thanks and Regards
    shanto aloor

  • Problem with B2C web shop(not opening)

    Hi all,
    Trying to open B2C web shop, getting run time errors.Infact did all the necessary XCM and CRM gui config settings.Role i have assigned here is SAP_CRM_ECO_ISA_WU_B2C.Even the product catalog replication was succesful.
    what could be the possible reasons for the above issue?
    Regards,
    PV.

    Hi ALL, my problem is resolved.
    the user password in jco setting is wrong and when i  corrected that. the error went off.
    So try to test run the applications where ever possible before accessing it.
    Priya

  • Interaction Center Mode functionality in B2C Web shop

    Hi,
    We have a requirement in which sales rep of a company will pre-populate a shopping cart for the customer in B2C Web shop. Later customer can order that shopping cart.
    We are trying to achieve this requirement through Call/Interaction Center Mode functionality.
    If anybody has worked on this functionality before or has any idea, please share.
    Regards, Vipul Kumar.
    Edited by: vipul_kumar02 on May 27, 2011 12:11 PM

    Hi,
    I have configured the call center mode functionality in spro (Customer Relationship Management -> Web Channel -> Basic Settings -> Activate Links from CRM WebClient UI to Web Channel Applications -> Start Web Shop in Interaction Center Mode) with the help of information given on help.sap.com.
    Now I can see B2C Web shop link on Web UI. The problem when I click on the link it's working if the URL in the backend is of google.com but not working for B2C Web shop. I think the problem is with the role assigned to the user.
    If anybody has any idea, please share.
    Regards, Vipul Kumar

  • Products in b2c web shop

    Hi
    I am busy implementing a b2c web shop and and facing a problem that I hope someone can help me with.
    My client has an established SAP ECC6 backend system running SAP retail. They create articles in ECC using transaction MM41. One article represents a product that can have multiple GTIN and units of measure for different pack sizes. When we replicate the products to CRM the product is created with the same article number, GTINs and units of measure.
    e.g. 1 can of cola (EA), 6 pack of cola (CK), and 24 case of cola (CS) is 1 article with 3 GTIN.
    I need to represent each GTIN as a separate product on the web shop although we only have 1 product in CRM. Is this possible?
    Regards
    Karl
    PS. Please let ne know even if it is not possible.
    Edited by: Karl Tilling on Jul 20, 2011 11:14 AM
    Edited by: Karl Tilling on Aug 3, 2011 3:46 PM
    Edited by: Karl Tilling on Aug 3, 2011 3:48 PM

    A GTIN is assigned to the product together with a unit of measure. As more than one unit of measure can be specified for a product, this means a product can have more than one GTIN.
    During an initial or delta download, EANs can be transferred from SAP ECC to SAP CRM as follows:
       (1)  Only the EANs corresponding to the EAN/UCC-8, UCC-12, EAN/UCC-13, and EAN/UCC-14 standards can be transferred from SAP ECC.
       (2)  As more than one EAN can be assigned to a material in SAP ECC per unit of measure but only one GTIN per unit of measure in the product master in SAP CRM, only the EAN with the Main EAN indicator is transferred.
    So, 1 product with 3 UoM is what you will get.

  • Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
    It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
    Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
    Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
    Dual 1.8 G5   Mac OS X (10.4.3)   1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

  • Have Firefox home page set for Google search, but each following tab opens w/Yahoo search instead. How do I remove the Yahoo and have Google home page on every tab????

    As I said above: I Have Firefox browser home page set for Google search, but each following tab (but suddenly now it) opens w/Yahoo search instead. How do I remove the Yahoo search off the added tabs and have Google home page/ blank tab (like it used to be) on every tab????

    The new Firefox Start Page - '''about:home''' - isn't the same homepage that was used in earlier versions of Firefox - http://www.google.com/firefox There is no "setting" for the "Search Container" on the about:home "page" - in the Options UI or in about:config .
    Set that old "Mozilla Firefox Start Page" as your "homepage". <br />
    http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    Or open your Profile folder and delete the '''webappsstore.sqlite''' file and hope the "Search Container" on the about:home "page" returns to Google. When it '''''is''''' Google, the Google logo appears to the left of the "Search Container"; when the search engine there has been changed to something else, there is no logo to the left of the "Search Container" - AFAIK.

  • How to hide/remove the 'Delete' button for a particular role

    We have a role that can only Create and Edit the Accounts, Contacts, Opportunities, & Leads. So I modified the Default and Owner Access Profiles for that role and changed the Access Level to 'Read/Edit' for each of the above mentioned Record Types.
    When the user is logged with this role they can see the 'Delete' button on all the Record Types. When they click on the 'Delete' button they get the 'Access Denied' message. Thats fine, but how do you hide/remove the 'Delete' button for this role so they don't try to click it.

    At this time it is not possible to hide/remove the "Delete" button. This functionality is on the roadmap.

  • [svn:osmf:] 11996: Updates and changes from the spec review for FMMLoader.

    Revision: 11996
    Revision: 11996
    Author:   [email protected]
    Date:     2009-11-19 11:12:19 -0800 (Thu, 19 Nov 2009)
    Log Message:
    Updates and changes from the spec review for FMMLoader.
    Modified Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/proxies/LoadableProxyElement.as
    Added Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/net/FMMLoader.as
    Removed Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/net/ManifestLoader.as

    Hi
    I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
    I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
    At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
    So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
    I have put a support email into Apple, but don't expect a reply any day soon.
    The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
    Do you mean, going back to the Folio Producer Panel, and building a whole new App?
    This process certainly isn't for the faint-hearted!
    HELP!

  • Want to remove the email address for renewing of 2 apps - and replace it with my email address

    Want to remove the email address for renewal of 2 apps on my iPhone and replace it with my current email - how can I do this???

    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

  • How to Remove the default Block for payment in MIRO

    Hi,
    In MIRO after posting the document message is coming,
    "Document no. 5105600184 created (Blocked for payment)"
    But our requirement is to remove the default "Block for payment"
    What is the necessary setting to be done to remove it.
    Thanks
    Prasant

    Hi
    Thanks for your reply.
    But in vendor master "Payment Transaction Accounting View"
    I have selected the check box" free for payment".
    still the message is coming in MIRO
    Prasant

Maybe you are looking for