B500 .... stuck at the last step to open the back panel ...

Hi
I have completed this stage
[IMG]http://i48.tinypic.com/14m80b9.jpg[/IMG]
And last step which I never get to open the panel ..
[IMG]http://i45.tinypic.com/2u7apsk.jpg[/IMG]
I follow the (1) and cannot open .... anyone can share some light ?

Hi guys,
last week I exchanged my 1 TB HD with an 128GB SSD drive. Because I know how hard it is to open the back panel I documented my progress with pictures for you.
To sum it up, you need:
Fingernails (essential)
two screwdrivers (essential)
Paperclips (nice to have)
fork (nice to have)
The Trick is to use every millimeter you can between the back panel and the main frame. You stuff it with one of the mentioned tools and search for a new space between the back panel and the main frame. When you have a bigger opening use the screwdrivers. I don't have the time to describe every step of the opening, just look at the pictures - you should get the idea. Be careful to only leverage screwdrivers against the gray areas preferabel when you notice metal under it. Don't leverage against the orange parts, they might break.
Hosted Pictures
I didn't change RAM/CPU/etc., but once you're in you should be able to figure it out for yourself.
If you have questions leave them here, I try to answer them.

Similar Messages

HT1296 Having difficulty getting music from my old 4S to transfer to my new 5S. I go through a Sync process and when it gets to the last step of Sync, the blue Audio bar shrinks back to show the few albums that are already on the phone.

I've been trying to get songs from my old 4S to my new 5S. I am using a computer to accomplish this. My 5s has a few albums I purchased from iTUnes. I see all the music I want to transfer to my new phone. I go through a Sync process and it cycles through the steps but the music will not get to my new phone. I used the Manage my music configuration.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

IPad / iTunes sync gets stuck at the last step

Whenever I sync my iPad and iTunes, it doesn't complete the last step and gets stuck on "Waiting for items to copy".
First it was with "Step 7 of 7: Syncing Genius data to iPad", so I deleted all Genius stuff and links to it. Since then it gets stuck with: "Step 6 of 6: Synching Artwork to iPad" and just hangs with it forever.
I am an Apple newbie, the iPad 3 is my first Apple appliance. What can I do to avoid having to exit syncing by unplugging the iPad? (NB iTunes runs on a PC with Windows 7.)
Thanks, Joseph

It may be that you have a couple of problem files. I have a similar issue, where some music, that I purchased via iTunes, won't sync on to my iPod.
I'd suggest that you start my turning off as much syncing as you can in iTunes. Use iCloud to transfer your calendars, contacts etc.
Then try syncing some of your music and other media manually. If there are errors, then iTunes should flag them up by saying "Could not copy xxxx because ..."
Personally, I only sync media manually, as I don't always want iTunes to perform a full sync every time I start it up. As my iPad is set to sync wirelessly, it connects to iTunes every time I open it.

Why is my syncing (ipad2) seem to be stuck on the last step?

Why is my syncing (ipad2) seem to be stuck on the last step?

Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

My iPad gets stucked in the last step of the sync with the computer.

When connecting the iPad to the computer the iTunes starts, reconizes my iPad and starts the sync of the iPad.
It syncs the contacts, calendars, pictures, music, etc, but in the last step (7th; "finishing Sync") it stucks and stays for ever without finishing.
I cannot load a previous backup because as soon as I connect the iPad to the computer the Sync process starts and no button is available.
I've tried to load again iTunes to start from the begining but it is still saying the same, that the Sync process is finishing and is blocked there.
Any help?
Thanks a lot.

Hi Demo,
I've tried what you say but, if I'm doing it right, it doesn't work because after rebooting it goes again to syncing and stucks on the last step.
Nevertheless let me check if I'm doing it right; When you say "Before you restore from the backup, quit iTunes, ...." you mean "Before" or "After" because I don't understand how I could reboot the iPad BEFORE I restore from the Backup if it is already restoring.
Just let me write down the procedure to check that it is the right one:
1- I launch iTunes (iPad not connected) and go to Edit>Preferences>Devices, and I check the box to Prevent the iPad to syncing automatically. I click OK.
2- I quit itunes.
3- I connect the iPad to the computer.
4- I launch iTunes.
5- I go to Restore from Backup
6- Restore from Backup is finished
7- I quit iTunes
8- I disconnect the iPad from the PC
9- I reboot my PC
10- I reboot my iPad by holding down on the sleep and home buttons... iPad stars.
11- I connect the iPad to my PC.
12- I launch iTunes
13- I click on sync button.
If the procedure is right then my problem must be another one because when I do it and it starts syncing again the same problems comes back again and the syncing never stops at the last step.
Thank you anyway for your time and support.
Best regards,
Francisco

My iPod used to be signed in with my moms apple ID but now I have my own. When I opened IMessage it wanted me to sign in, but on the last step it said, "your email can't be verified since its already in use" please help I want to use IMessage.

My iPod used to be signed in with my moms apple ID but now I have my own. When I opened IMessage it wanted me to sign in, but on the last step it said, "your email can't be verified since its already in use" please help I want to use IMessage.

Hi Kanemelinda8833,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Also, make sure you have signed out of your Mom's Apple ID and are signed in with your own Apple ID on this device.
Click on the link to see more details and screenshots.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Sign out of your Apple ID on all iOS devices, in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID on your device.
When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At
Cheers!
Judy

Import Wizzard Open on the last step

Hi
I'm having a problem when trying to load data.
When I select the import package it opens the wizzard incorrectly. It seems to be opening on the last step.
It does not open on the first step so that I can choose the file to import.
Can someone please help. Why isit doing this?

Hi
If I try look at the package, try modify the stanadrd "import" I'm receiveing this error
Exception Text **************
System.InvalidCastException: Unable to cast object of type 'System.Xml.XmlText' to type 'System.Xml.XmlElement'.
   at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.LoadDetail(String strXMLString)
   at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.GetPackageDetailfromServer(String strPackageName, String strPackageFilePath, String strTeamID)
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.PackageListClickEvent(String strPackageID, String strPackageFileName, String strTeamID)
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.SetStartUp()
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.frmMain_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
There seems to be something wrong.

PI 7.1 install issue on the last step

I am installing pI 7.1 on HPUX IA64 and Oracle 10g.
On the very last step, I get the error:
An error occurred while processing service SAP NetWeaver Process Integration 7.1 > Installation Options > SAP Systems with Oracle > Standard System > Standard System( Last error reported by the step :Execution of UTL tool '/tmp/sapinst_instdir/PI71/INSTALL/SYSTEM/ORA/STD/AS/sapjvm/sapjvm_5/bin/java -classpath /usr/sap/XID/SYS/global/sltools/sharedlib/sap.comtcbloffline_launcherimpl.jar -showversion -Xmx256m -d64 com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain /usr/sap/XID/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/XID/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/XID/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/XID/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/XID/SYS/global/security/lib/tools/w3c_http.jar:/usr/sap/XID/SYS/global/sltools/sharedlib:/oracle/client/10x_64/instantclient/ojdbc14.jar -activated -prod_name=NetWeaver -usage_name=AAS -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=XID -dsn=jdbc/pool/XID -ssprops=/usr/sap/XID/SYS/global/security/data/SecStore.properties -ssk=/usr/sap/XID/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_activate_usages.log' and '/tmp/sapinst_instdir/PI71/INSTALL/SYSTEM/ORA/STD/AS/UTL.java.log' for more information.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
The database is up, in fact I can log in a number of waty from bothe the ABAP and Java sides, and it appears to be operating normally.
I opened a customer message w/ SAP, but that's not getting me very far, thought I'd have more luck here.
The UTL_activate usages. log file contains the messages:
Sep 25, 2008 7:07:51 PM Info : Successfully parsed!
Sep 25, 2008 7:07:51 PM Info : Executing command Activate...
Sep 25, 2008 7:07:51 PM Info : Establishing DB connection...
Sep 25, 2008 7:07:56 PM Path : Exception : The DataBase is down or the connection parameters are wrong: -sid=XID -dsn=jdbc/pool/XID -ssprops=/usr/sap/XID/SYS/global/security/data/SecStore.properties -ssk=/usr/sap/XID/SYS/global/security/data/SecStore.key -keyphrase=null
java.lang.Exception
 at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1141)
 at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:413)
 at com.sap.exception.BaseException.<init>(BaseException.java:302)
 at com.sap.sl.ut.infoprovider.exceptions.UTInfoException.<init>(UTInfoException.java:99)
 at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:373)
 at com.sap.sl.ut.manager.persistence.db.InfoManager.activateUsageType(InfoManager.java:124)
 at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.activateUsageType(DataBaseInfoFactory.java:1356)
 at com.sap.sl.ut.manager.command.Activate.execute(Activate.java:46)
 at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
 at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:59)
 at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:55)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "/usr/sap/XID/SYS/global/security/data/SecStore.properties" is invalid: software version 6.30.000.001 is incompatible with file version 7.00.000.001..
 at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
 at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
 at com.sap.sl.ut.manager.persistence.db.DBConnection.connectViaSecureStore(DBConnection.java:157)
 at com.sap.sl.ut.manager.persistence.db.DBConnection.connect(DBConnection.java:171)
 at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:371)
 at com.sap.sl.ut.manager.persistence.db.InfoManager.activateUsageType(InfoManager.java:124)
 at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.activateUsageType(DataBaseInfoFactory.java:1356)
 at com.sap.sl.ut.manager.command.Activate.execute(Activate.java:46)
 at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
 at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:59)
 at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:55)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.security.core.server.secstorefs.FileInvalidException: File "/usr/sap/XID/SYS/global/security/data/SecStore.properties" is invalid: software version 6.30.000.001 is incompatible with file version 7.00.000.001.
 at com.sap.security.core.server.secstorefs.SecStoreFS.checkCompatibility(SecStoreFS.java:1876)
 at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1954)
 at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
 at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
 ... 15 more
Any help would be greatly appreciated.
Cheers,
-Bud

Hi,
Has this issued been resolved please let me know the solution.
Regards,
Yashwant

The last time you opened Finder, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?

The following phrase/option box keeps popping up on my finder: The last time you opened Finder, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? regardless of whether I click to reopen or not the box disappears and then comes back again regardless of which answer I pick. How do I get rid of this annoyance?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

When i connect my ipod touch to the computer and it brings up itunes, and it starts syncing, it just stays on the last step(6) and I can't download anything else to my ipod.

I connected my ipod touch to the computer. When it brings up itunes and start to sync, it stalls at the last step (6). This keeps me from being able to add other songs from my library to my ipod. I'm very new at this and maybe just don't understand how it works.

Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

How can I finish the last step in the 2 Day Plus Appl Express Developer

Hi,
I try to follow doing the steps the Chapter 8 How to Upload and Download Files in an Application of the 2 Day Plus Application Express Developer, after I had finished
the input to Oracel XE (all steps in this chapter and the procedure in 'Downloading Documents from the Custom Table'), I open the "run Page 1 icon" , the procedure seems no running and cause the error 'Page cannot be found'.
I doubt the type is wrong or correct "#OWNER#.download_my_file?p_file=#ID#".
Are there any one can tell me ?
Regards,
Simon Wong
Message was edited by:
user505611

Simon,
here is the full example. Please follow the steps closely. Input exactly what is written in bold characters (without the line numbers though).
Here we go (in a dos command box):
C:\WINDOWS\system32>sqlplus system@xe
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Aug 13 12:48:24 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
*** Show more detailed error information in the browser ***
SQL> exec dbms_epg.set_dad_attribute('APEX', 'error-style', 'DebugStyle');
PL/SQL procedure successfully completed.Now try to run the following url in the browser: http://127.0.0.1:8080/apex/hr.hello_world
This will give you the following error message:
hr.hello_world: PROCEDURE DOESN'T EXIST
DAD name: apex
PROCEDURE : hr.hello_world
URL : http://XDB HTTP Server:8080/apex/hr.hello_world
PARAMETERS :
===========Now continue with the sqlplus - session :
*** Switch session to user HR to create procedure hello world ***
SQL> alter session set current_schema=HR;
Session altered.
SQL> CREATE OR REPLACE procedure hello_world
2 is
3 begin
4 htp.p('hello world');
5 end;
6 /
Procedure created.
*** check to see whether the procedure was created properly ***
SQL> desc hr.hello_world;
PROCEDURE hr.hello_world
*** grant execute on procedure to account ANONYMOUS ***
SQL> begin
2 execute immediate 'grant execute on hello_world to anonymous';
3 end;
4 /
PL/SQL procedure successfully completed.
*** Switch to user FLOWS_020100 ***
SQL> alter session set current_schema=FLOWS_020100;
Session altered.
*** for testing, disable the security mechanism ***
SQL> CREATE OR REPLACE function wwv_flow_epg_include_mod_local(
2 procedure_name in varchar2)
3 return boolean
4 is
5 begin
6 return true;
7 end;
8 /
Function created.Running the url again should work now, the security mechanism is disabled.
If this works, we can enable the security mechanism again:
*** now create the function again, checking for the proper procedure name ***
SQL> CREATE OR REPLACE function wwv_flow_epg_include_mod_local(
2 procedure_name in varchar2)
3 return boolean
4 is
5 begin
6 if upper(procedure_name) in ('HR.HELLO_WORLD') then
7 return true;
8 else
9 return false;
10 end if;
11 end;
12 /
Function created.
*** remove the debugging information ***
SQL> exec dbms_epg.delete_dad_attribute('APEX', 'error-style')
PL/SQL procedure successfully completed.You don't need to restart any services inbetween the outlined steps and you shouldn't have to change any security settings in your browser. It is all done in the database.
If it still doesn't work, please post your error messages from the browser here.
Regards,
~Dietmar.

When I try to use siri to book an appointment the last step when she says "do you want me to shedule that for you" I say yes and then she says "Sorry I can't do that, very frustrating. Do I have to turn on another setting or something?

When I try to use siri to book an appointment the last step when she says "do you want me to shedule that for you" I say yes and then she says "Sorry I can't do that, very frustrating. Do I have to turn on another setting or something?

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

How do I "save tabs and quit" in this new version of Firefox, as I did in the older version? I want to be able to see the same websites open from the last time I closed the computer.

In an earlier version of Firefox, when I went to close it, I would get a prompt "save tabs and quit?" that allowed me to see the same websites open from the last time I closed the computer. Where is that feature on the new version of Firefox?

Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs. 
You can use "History > Restore Previous Session" to get the previous session at any time. 
You may need to click the orange/gray Firefox button to see History. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" I would be thankful if you could help me?

I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
Process:         Numbers [1021]
Path:            /Applications/Numbers.app/Contents/MacOS/Numbers
Identifier:      com.apple.iWork.Numbers
Version:         3.0 (1470)
Date/Time:       2014-06-27 16:13:23.405 +0100
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 243D9264-54B7-E9AE-2F83-D11098965D14

I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
Process:         Numbers [1021]
Path:            /Applications/Numbers.app/Contents/MacOS/Numbers
Identifier:      com.apple.iWork.Numbers
Version:         3.0 (1470)
Date/Time:       2014-06-27 16:13:23.405 +0100
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 243D9264-54B7-E9AE-2F83-D11098965D14

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

B500 .... stuck at the last step to open the back panel ...

Similar Messages

Maybe you are looking for