B560 audio specs + Ubuntu issues

I'm trying to set up Ubuntu on my new B560. So far sound is not working.
Ubuntu describes the sound card thus: "Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)" And Windows 7 uses drivers from Realtek.
Can anyone give a more detailed/specific name/description of the sound card? (that might help in deciding which driver setting to use)
Or does anyone have experience getting this to work in Ubuntu or another version of Linux?
Solved!
Go to Solution.

Problem solved by upgrading Ubuntu. The soundcard is a Realtek ALC269VB.

Similar Messages

X-Fi Xtreme Audio & 4GB RAM issue - latest driver?

:X-Fi Xtreme Audio & >4GB RAM issue - latest driver?T Hi All,
Been using an X-Fi Xtreme Audio with 4GB RAM for ages, no issues.
I purchased and installed a zotac 9600 GT which has GB onboard ram, which works fine, but now my X-Fi has started causing general system instability. (processes using heaps of CPU time whilst apparently doing not much, jerky/slow adobe flash, distorted (slow-motion) audio at random times, etc etc.
In the support section here it says:
Audio issue from output from soundcard with computer having 4GB RAM:
<span class="text">
Keywords: <font>4GB ram, installation, xfi, x-fi
Summary: Customers with computers having <font>4GB or above of RAM and are experiencing audio issues, please download the latest driver for your sound card.
However... When this issue first came up I formatted my primary dri've, reinstalled the OS and downloaded the latest drivers for EVERYTHING. The problem has prevailed..
It was only yesterday that I tracked down this problem in the support section here, and tried to verify that my driver is indeed the latest. But device manager lists the driver as "6.0.0.209" when in the support section here the downloads are named ".xx.xxxx" or something. How can I confirm that I have the latest driver? In any case, I'm almost certain that I have the latest, and this issue is still occuring.
I have read in other forums that on other varients of my X-FI card, the latest drivers have not solved this problem either.. sorry I cant be more accurate than that.
For now, I have solved this problem by simply removing 2GB of ram from my PC. Obviously, I'd like to find a solution and put the other 2GB back in!
Thanks in advance for your help!

Could DanielK please mod this as well, so we can try them. Or Daniel, you could you please tell me how you modified the previous drivers from auzentech as I dont know how these CL drivers work and are modified. What is the inf in these drivers, and if you could tell me the deviceID?s of all the x-fi models, or atleast for x-fi xtreme music as it is my modell. Thx in advance!
EDIT:
I have modified the drivers, was not so hard after all. Im uploading the file now, which should have support for all X-FI cards thanks to Daniel's great job with the earlier version.
Upload finished in 4-5minutes. I will post with link soon to rapidshare!

MiniDV audio sample rate issue

I cannot get the audio sample rate to match. I have captured miniDV footage (32mhz/12bit). In Sequence settings the audio options for bit are 8, 16, 24. My audio is out of sync!!!! What can I do? I have 2 hours of raw footage and can't proceed! Any help is VERY appreciated. thanks in advance!

Hi again!
Hum ... that´s not as simple as it could be!
That way i´ll have to capture twice?!
There must be another way of doing it , i don´t think Avid can do it and FCP don´t .
As i told you i use both systems and i know they´re limitions (or i think i know!), but it´s strange because Avid Xpress DV 3.5 (from the age of stone ) do it in a blink ... ok ... found an FCP limitation!
Thank you!
If there´s another way ... please feel free to post it!
(and is was supposed to "reply" a "miniDV audio sample rate issue.
HBars

Audio Video synchronization issues

Hi,
I have a video application that I am building - and
previously I used FMS and TCP connections for video. Now expecting
the latency to be much lesser with UDP, I implemented UDP in my
application and stratus as the RTMFP capable server. I used the
sample video phone application's tutorial do a simple sendStream
and receiveStream for video.
However, unlike the hosted sample application itself, my
audio and video are completely out of synchronization - about 4
secs!! I tried to look at the sample code to see if there were any
special settings that were made. I could not find any.
My questions:
1. Did Adobe make any special tweaks in their hosted sample
application? If so, what are they?
2. Are there any known synchronization issues with using
RTMFP connections for video?
3. Does anyone else also face audio video synchronization
issues?
4. If none of the above is true, what do you think my
mistakes are? Please let me know if I need to add more information
to answer this question.
Thanks in advance.
Rohan

with RTMFP, video and audio can go out of sync if the data
rate of your stream exceeds your network capacity. video is
currently sent with 100% reliability, so once it's queued for
transmission, it's going to be sent (eventually). video is lower
priority than audio, though, so your audio data gets first dibs on
your network capacity. if the video stream's data rate is higher
than what fits in your network (after audio), the video data will
back up until its send buffer is filled, and new camera frames will
stop getting captured. in the steady state, this can look like a
multi-second offset between the video and audio.
try turning your video rate/quality down so that it fits in
your network capacity. video and audio should stay in sync.
with RTMP, there's one network transmission buffer (TCP's)
for all of the parts of your stream (audio & video). when you
have insufficient network bandwidth, the TCP buffer will eventually
fill up and video frames will stop being captured to compensate. so
while audio and video might remain in sync, the total end-to-end
latency will go up. when using RTMFP, the audio and video have
independent transmission buffers, so in cases of insufficient
network resources, the higher-priority audio should remain more
timely but video may fall behind.
-mike

Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 13" laptop after Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio. The video is clear but also being played in repeated frames as it moves slowly forward!- sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided?? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

What are the detailed audio specs - Intel iMac 2.66ghz (early 2009)?

Hi, I am wondering what the detailed audio specs are for this system - Intel iMac 2.66ghz (early 2009).
The online description only provides the basics. I would like to know more, such as frequency response, sound to noise ratio, etc. Is this information available anywhere?
Thank you.

Apple hasn't posted detailed release notes for the 2009 iMacs yet, but I doubt that the audio specs are any different from those in the 2008 iMac which can be found here.
Regards.

Audio/Video sync issues after exporting

Two quick issues:
1. I've recently exported a project from FCE4 to quicktime and am finding that the audio is slightly out of sync with the video everytime.
Is there an ideal format or setting I need to export at to avoid this?
2. Also, I've edited two projects using the same clips and keep finding that the second one I make seems to make the video very narrow when I export it. Is there a setting I need to use to avoid this, or does the problem lay in the setup?
Cheers!
John

From what I see in your info, the clips don't match the Sequeunce.
Furthermore, the clips are not FCE freindly. Probably required rendering?
I'd suggest using Streamclip to convert the H.264 clips to the exact specs of one of the FCE>Easy Setups, audio and video properties, then start over.
http://www.squared5.com/
BTW: Whatever you convert the clips to must match the Easy Setup, so that you work with Clips and Sequence being the same. The best way to acheive this is to start a NEW Project, set the Easy Setup first, then bring in the the matching clips.
Using Item Properties in Browser>Seqeunce/Clip is one way to confirm matching specs for both.
Al

Audio / video sync issue in playback

for every recording i've made, when i play back the archive there is noticable lack of sync between the audio and the person's mouth. the video seems to lag behind by almost a second. the good news at least is that the delta is constant.
has anyone else experienced this? it's happening in any scendario i try, even if i'm just recording myself.
is the LCCS dev team aware of this? since audio and video streams are recorded separately, is there any way for me to programatically 'nudge' the streams into sync?
it's currently a show stopper, it looks really bad when the sync is so obviously absent.

finally getting back to this..
i did as you suggested and recorded a video of myself using the recording and playback examples provided with the SDK (the 2.2 newest version btw).
the de-syncing of audio and video is definitely there. it seems especially bad for longer recordings. however, an interesting thing i discovered in playback:
- sometimes, if i drag the playhead somewhere in the recording, pause, and then hit play, video and audio fall into sync.
- if i start playback from the beginning of the recording, audio/video is always out of sync.
i understand that the video and audio streams are recorded separately and thus played back separately. my guess is that when those streams are retrieved and playback begins, one starts before/after the other because they're not retrieved at exactly the same time. it seems some extra work is required to ensure that their playback commences at exactly the same timestamp within each stream.
i can provide my recordings as an example if required.
this is a total showstopper for me. it renders the entire recording service useless if the playback can't have sync between audio and video. i would be happy to help with testing this more. can someone from the LCCS team comment on this issue?
thanks
adam

When I play a movie through iTunes, audio has no issues but video stutters and skips

Hey everyone,
I have a Dell 17R, Windows 8 64 bit, intel i7-3630QM at 2.4 GHZ, 8gb ram, Nvidia GT-650M at 1920x1080 using driver 320.49
When I play a movie in iTunes, the audio works flawlessly but the video will be smooth for a few seconds, stutter and then skip small 2-3 second spots. I haven't noticed that the parts skipped are any more graphically intense than other spots and there is no discernable pattern.
In the past, I have been able to play movies through iTunes with absolutely no problem but when I downloaded this most recent one a few days ago all of my movies have been experiencing the same issue.
When I stream other videos from other sources I do not experience the same problems as I do when I use iTunes. Streaming 1080P over youtube or a similar services is no issue.
I have updated my video drivers to the latest version as well.
I am at a loss, any suggestions would be appreciated.
Thanks!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
-Griff W.

Osx 10.6.8 m audio midi keyboard issue, not recognised

hi
after updating the OS to the latest snow leopard i'm no longer able to use my midi keyboard (M-AUDIO Radium 61 usb powered)
i'm using an M-Audio fast track pro usb external audio device and when i plug the midi cable, coming from the keyboard, none of my softwares recognise it (Logic pro, Ableton, Reason).
the monitor led for the midi signal is flashing indicating that signal is received but no signal at all seems to be sent to the OS.
i initially thought it might have been the audio device driver: outdated for the running osx (audio ins and outputs where behaving correctly anyway) and did update it. No changes
i've also downloaded the latest keyboard's drivers (for osx 10.6.8 32bit), wich seemed superfluous to me since i'm using it via midi cable only, with no results.
Tried by repairing disk permissions as well in disk utility (just in case..)
tried my devices on a diffrent macbook installing an older version of snow leopard and they're doing theyr job properly
tried using a Midi to USB cable converter instead (was working on the other computer)
i don't have (i'm not sure at least) a backup for the previous osx upgrade to restore (is there a way to find out what version of the os is backed up within time machine?)
any help will be highly appreciated
Matteo

the issue persists with Lion os 10.7.3

Audio tracks playing different audio tracks - routing issue?

I'm having trouble with some routing issues I believe. Here's the deal:
Some audio tracks are playing different audio tracks, when that region is not even in it. For instance:
Track #2 is Soloed. Output is Output 1-2. I hear the audio file that is in Track #1, which is NOT Soloed and I shouldn't even hear. I don't hear anything from Track #2. The only way I can hear Track #2 is by playing it from the audio bin, which obviously isn't going to work out right.
If I drag the audio region of Track #2 to a brand new audio track, I still don't hear anything. Is it possible this audio file(s) got corrupted somehow?
Please help!

Chris Joye wrote:
I'm having trouble with some routing issues I believe. Here's the deal:
Some audio tracks are playing different audio tracks, when that region is not even in it. For instance:
Track #2 is Soloed. Output is Output 1-2. I hear the audio file that is in Track #1, which is NOT Soloed and I shouldn't even hear. I don't hear anything from Track #2. The only way I can hear Track #2 is by playing it from the audio bin, which obviously isn't going to work out right.
If I drag the audio region of Track #2 to a brand new audio track, I still don't hear anything. Is it possible this audio file(s) got corrupted somehow?
Please help!
Check the parameters, in the left side of the arrange page window.
To me, it sounds as if you have a bunch of arrange tracks, which are all playing back through audio track #1.
Cheers

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

About to purchase a 24" iMac - Any Audio Line In issues?

having read this thread... http://discussions.apple.com/thread.jspa?threadID=642356 i'm worried about the new 24" iMac being plagued with Audio Line In crackles and pops when recording audio. eg - GarageBand, etc.
My current Mac, a Power Mac Dual 2ghz G5 (1st gen) had similar issues, why can't Apple get Audio Input right?
I use Logic Express, but I assume if there's a hardware problem it will be present in all apps.
Can anybody confirm if these issues are present before I make my purchase? Thanks.
Dual 2Ghz G5, 2.5GB RAM, 500GB HD, 250GB HD Mac OS X (10.4.5) ATI RADEON 9800 PRO 256MB

Mark, this is a hospital ward. There will always be someone who has some issues. The chances of your getting a specific issue yourself in two separate machines are very slim unless the software itself isn't written right.
Some crackles can be explained by audio file compression. When you compress audio, occasionally data corruption and other issues get caught up in the mix. It is best if you record audio uncompressed if you want the best quality for your audio, or if you use compression, use it at a high enough bit-rate to satisfy your audiophile ears.
Don't worry about getting the issue, and if you do get the issue, that's why you have AppleCare.

After upgrading to latest version of iTunes audio CD burning issues

Hi,
I upgraded to the latest version of iTunes and now when I try to burn a playlist as an audio CD it keeps telling me it won't fit on one CD and I have now gotten the playlist down to 1 hour and it is an 80 Min CD and it still won't let me do it. Anyone else having an issue and if so is there a solution?
Thanks,
Mike

I've seen this once before and deleting the playlist and recreating it with a different name solved it.
Also... try using disk utility to burn a data CD to make sure that burning generally works. Daft I know, but there you go.

Apple TV audio/voice track issues

We just started using Netflix with AppleTV. For several programs we can hear the music track, but the audio track is absent. Dolby setting is "auto", we've done all updates, restarted, no luck...any suggestions?

Managed to solve this problem myself, it turns out that the files that were causing issues had two audio tracks attached, when the file is loaded i press and hold the middle button to bring up the options, from there press right to the middle tab and change the audio from surround to normal and it plays at normal speed, i have no idea why it was doing this but i can now watch ALL my material finally! hopefully this helps someone else!
Jim

B560 audio specs + Ubuntu issues

Similar Messages

Maybe you are looking for