B570 Keyboard Issue.... Keyboard stuck key issue....

Okay...
Earlier in February, My sister accidentally spilled sweet tea (That's right, Sweet Tea) on My BIBB Laptop... After letting it dry for a few days, I found out that the Main Keyboard needed to be replaced, so I bought a replacement Keyboard in June... However, when I plugged it in to my Laptop and tried to start it up, This error occurred:
Error: (I Can't remember the number) Keyboard Stuck Key.
After Unplugging the replacement keyboard (Which is in Great Condition...) I restarted the Computer with my USB Keyboard Connected and it started up fine.... After logging in, I tested my replacement keyboard by plugging it in, and found out that both Shift keys, Backspace keys, arrow keys, and the Number pad on the far right of the Keyboard weren't working....
A friend of mine told me that it was a Motherboard problem and the laptop would have to be replaced, But now I Don't know what To do now....
My question is:
Is there a way to fix this without replacing the whole Laptop? And if so, How?

I'm unable to find any information on Seacreate. Are you sure it's spelled correctly?
Try running a Windows update to see if that finds a driver for it. http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isnt-working-properly
If that updates properly and it's still not working, then it's more than likely a hardware issue. Can you check the keyboard cable connections and make sure it is all secure and not crimped, broken, etc?
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

Similar Messages

T400 stuck key issue

I bought my T400 2764-CTO in last December, and started using it on mini dock without any problem. Until recently, it starts to show stuck key issue randomly (not always failure) both at boot up or under Windows Vista.
ERROR
0210 Stuck Key FF
Press <F1> to SetUp
Note: the stuck key keeps changing, sometimes 13, sometimes 1F, sometimes other key.
I opened the laptop, and checked the connection of the keyboard but couldn't locate any problem there. Can this be a keyboard issue? Or even a motherboard issue?
Can Lenovo swap a new keyboard for me? If so, what do I need to do then?
Thanks!
Best Regards

You can call Lenovo service, and log a service call, they will make the necessary arrangements. If you are not confident with bios update then please don't do it youself, and let the warranty department do it for you, as any mistakes can make your laptop useless and you will be paying couple hundreds of euros to get the motherboard replaced.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Issues with 'stuck' keys on new iMac (2011) with Aluminium KB

Hi All,
I've got a weird issue which I've seen on a few other forums... with no real fix. I've got a new 27" iMac (2011) and I have been using it happily for a few weeks. In the last two days, my keyboard has been going a little crazy.
Firstly I thought it funny that the 'option' key wouldn't work during bootup and later I discovered that once booted in OSX, i'd have 'sticky' keys or keys not registering when pressed.
When I reset the keyboard, everything works fine again.
Its becoming a problem as I cannot register an of the bootup options anymore and have reverted to using an old Remote to access my boot volume screen (holding the Menu button).
Has anyone seen this before and if so, what is the fix other than taking the keyboard back to the Mac store?
Thanks again,
Con

Hi Cabakroll,
Yeah, I've been doing regular updates (when available). I have actually figured out the issue... its a very weird fix mind you. I went back to see what changed the other day, when I first notice the issue. I recalled that I swapped out the batteries (the ones that came with it were running low for some reason), with rechargables.
Since then, the keyboard has been going crazy. I swapped the rechargables with normal batteries and bingo, problem fixed. :S
Thanks for getting back to me though.
Hopefully this helps others too.

Keyboard Number Key and Directional Key Issues

This is a problem with the keyboard number keys and the Plus Key on the number pad, the number keys at the top of the keyboard above the letters, and the directional keys at the bottom of the keyboard next to the alt/ctrl keys. When pressed they are malfunctioning as follows, and I am actually typing the result on the keyboard numbers or number pad keys to demonstrate the result. Keys at top of keyboard: Pressing the Dash Key: `1Pressing Number One: `1Number 2 works finePressing Number 3 dims the screenPressing Number four: 54Pressing Number five: 54Pressing Number six: 67Pressing Number seven: 67Pressing Number eight: \8Number 9 works finePressing Zero: -0 Number Keypad: Pressing Number one: +1Number 2 works fineNumber 3 works finePressing Number four: 64Number 5 works finePressing Number six: 64Number 7 works fineNumber 8 works fineNumber 9 works fineNumber 0 works fine Keypad symbols: Pressing Plus Key: +1 Directional Keys: Right Arrow Key: Cursor moves up a random number of lines in a document.Left Arrow Key works fineUp Arrow Key works fineDown Arrow Key (inserts back slash): \ I have searched and searched and have not been able to find a solution to this or even another post outlining this type of problem. Please Help.

Hello there,
It sounds like you're going to either need your keyboard replaced, or have the buttons fixed. You can either have this done professionally, or personally, since the warranty states that you're permitted to replace the keyboard. For more information on how to replace it, visit this pdf and scroll down to keyboard, under replacement. https://www.google.com/url?sa=t&source=web&rct=j&ei=4U2bVeSZOMSu-QGwtIuIBQ&url=http://h10032.www1.hp.com/ctg/Manual/c03935332&ved=0CCIQFjAB&usg=AFQjCNFI7Za3MTOYi3U2gqYwky_v2R-eIA&sig2=BEpyqWkFFkSjkR0z4r5v-Q
I apologize for it being a Google link, since I am on mobile.
Best Regards,
Shawn

Tecra M10 - Stuck CTRL key issue -- perhaps to do with BIOS?

Hello and thanks for reading.
I recently switched my Tecra M10 to Windows 7 (from XP) and it soon developed the dreaded "stuck CTRL key" issue. This causes the keyboard to behave as if the CTRL key is permanently depressed. Sometimes hitting a combination of keys, or bringing up the onscreen keyboard, temporarily solves the issue, but then it returns.
It seems to be an issue many people have, with no simple solution. I've looked at every thread about it I can find, and tried many things to do with drivers etc. without any success.
So firstly, if anyone knows a remedy that works for this particular machine, I would be very grateful to learn it!
Then, there are two things I've not yet done: update BIOS and disable pinch zoom.
I was looking at the following BIOS update:
http://www.toshiba-asia.com/sg/support/drivers/details/25244
... which is version 3.00 and seems to be most recent. My own version is 1.90.
However version 3.00 is labelled "For PTMB0* ONLY". I don't know what this means or whether it applies to me. Can anyone help? Should I install this BIOS?
For the pinch zoom, I've been told that disabling it does sometimes cure the CTRL problem -- but I can't find any pinch zoom facility on the M10. I suspect it simply doesn't have one. Is that right?
Many thanks for any help you can give.

Hi
> I was looking at the following BIOS update. which is version 3.00 and seems to be most recent. My own version is 1.90.
There are different Tecra M10 models on the market.
Check the labels at the bottom of the unit. There you should find some numbers like for example PTMB0E-01K00LGR
The first 6 characters are important: for example PTMB0E
I assume your notebook belongs to European series.
In such case you should check the Toshiba EU driver page for possible BIOS update.
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
However, on Toshiba EU driver page you will find also the BIOS v3.0 for all European Tecra M10 units.
Anyway, back to the CTRL button issue: guess what, you should connect an external USB keyboard and should check how the CTRL button acts.
In case the USB keyboard would work properly, the CTRL button of internal keyboard is affected and you will need to replace the internal keyboard.
PS: it could be possible that the option "sticky keys" has been enabled. To disable this function, you have to press SHIFT button 5 times in the row.

Messed Up Keyboard Mapping, not an Software Issue

Greetings Folks!
I've been having a strange problem with my keyboard; the keyboard mapping is all messed up!
I was writing a piece of work this afternoon, and had to go out for couple of hours. I put my Macbook Pro into sleep and gone out. When I returned, I seemed to having problem logging in again. Tried to log in to guest account, all worked normal. I did some trials, apparently my keyboard mapping got screwed. All keys are working but all address strange letters, like Kyrilic or Scandinavian letters. Function keys are OK, I can adjust the brightness, etc, touchpad is fine, but no text.
I'm practically locked out of my account. Only one thing is the extreme slowness of stacks. It takes forever icons to pop out, everything else seems fine. All software work, everything is OK, and local keyboard mapping settings seems fine.
Any suggestions?

Yeah, keyboard is messed up, it was an hardware issue.
I've stopped by in my Apple Store and told them about the problem. They were very kind, and I handed my Macbook Pro over. The have examined it, and delivered to me shortly. According to the service document, one of the function keys struck somehow, altering the whole mapping of keyboard. They have changed it, and my Mac runs like new.
Thanks for tips mate.

Keyboard- Azerty to Qwerty migration issue

Hi.
Have an issue with a qwerty keyboard. I used to have a french azerty keyboard out of which I migrated to my brand new macbook air in an english environment.
First of, keyboard values are not working properly as even though i switch language input source, several input buttons are not reflecting their values properly.
Second, in order to solve another issue -keyboard backlight- I was told to act on the F5 and F6 buttons. Didn't work out either.
Please help me out.
Thanks.

Just in case, what model is your macbook air? 2010 models don't have backlit keyboards.
You can tell what model it is by clicking on the apple at the top left of the screen and "about this mac". If it says Core2Duo processor and you bought it brand new on 2010-11 then it won't have keyboard backlight.

Issues with Fn-keys and Synaptics touchpad on Asus X51RL laptop

Hello,
Since I installed Arch on my laptop, it's been working great. But I still have a few issues:
1) Fn-keys do not work. The brightness Fn-keys work, but I think that's done internally by the laptop, since it works even in the BIOS. The sound Fn-keys don't work, which is the ones I really need. How can I fix this? And I read somewhere that I have to switch from the kbd drivers to the evdev driver, is that true?
2) Since the latest update to the synaptics package in testing, the touchpad lost one-touch tapping, along with some other stuff. I know the solution is to disable hotplugging, but I sometimes need to plug in a keyboard or mouse, so I can't. How can I retain the scrolling and one-touch tapping settings from Xorg.conf AND hotplugging while using the latest synaptics?
3) The pre-configured options for the synaptics touchpad in the archwiki are good, but not that accurate. The size of the scrolling section of the touchpad is a bit too large, among other things. It's a minor problem compared to the others, but it'd be nice to fix it. In Windows, I definitely remember the settings being more accurate. Is there a way to have the Synaptics driver autodetect like the Windows one, or am I missing something here?
Thanks a lot in advance!

I have the S62J (Intel verified whatnot version) with this Asus, the brightness keys work. I think they are hard wired though as they work in the BIOS.
I tried the acpi-support, but I haven't had any luck with it yet. I'll have to mess with it some more to see if I'm missing something.
I'm also wondering if there isn't a different keyboard layout I should use. I notice that there is a 30-something-asus-something.fdi (I'm not on the notebook at the moment) on the system, but I don't know if it's being used by anything.
The other observation is that using the Fn button is throwing ACPI calls into my dmesg.log file. I need to research to find out how to use them.

Wireless keyboard sk-2061 sleep key doesn't work. How do I get it to work?

The sleep key doesn't work on my HP SK-2061 wireless keyboard. How do I get it to work?

Hello @SunLovinGran,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your wireless keyboard's sleep key doesn't work. Is your computer able to enter sleep mode by itself after a certain period of time? Are you able to enable sleep mode using a different keyboard?
In the meantime, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting. This should help diagnose any possible issue with how keys or buttons are input using your keyboard.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Repeating key issue

I just moved to the Mac a couple of months ago. I love it and haven't looked back. However, today, I used my Mac twice. First, this morning, I didn't do anything unusual. I cleared out my trash, browsed a bit on the Internet and answered e-mail. Then I modeled some artwork. I shutdown my machine, shutdown my cable modem & router and went to work. When I came back at lunch nothing was wrong and I hardly did anything (Internet still wasn't on).
However when I came home after work, I started the machine up and the hard drive icon kept popping up and it was difficult to use the menu because I had to hold down the mouse button instead of just click. It turns out that the space key is repeating spontaniously. I thought it might be the keyboard but it doesn't stop when I unplug the keyboard.
Has anyone had this before? How do I cure it? Thanks.

Hi Redspark,
Did you arrive at any solution to your repeating key issue? I've recently joined the discussions forum because I'm having a similar problem - without having typed anything, my backslash spontaneously inserts itself into any text box available and starts repeating itself across the page. In the Finder, I also get various folders spontaneously highlighting themselves, if I pull down a finder menu, it flashes which makes it almost impossible to select anything. As well I get sudden outbursts of the error chime.
Have done an Archive and Install, reset the PMU. I've also zapped the PRAM, checked my RAM slots, checked Permissions, etc.
Let me know if you've got any further insights.
Thanks.

I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

Thanks for replying (thorvsphoenix)
The windex was sprayed on the cloth, not the keyboard. And only one or two pumps on a hand towel. No liquid seeped between the keys the towel was barely damp. You are saying the ammonia gas created the problem?
I think It was more an issue of multiple keys being depressed at the same time that screwed up the configuration. That is why I need to "reboot" the keyboard.

F110 Grouping Key Issue

I have 3 open items for a vendor - 2 credit memos (with 1000 and 600 amounts ) and one invoice (with amount 600). In the current situation, these items are not offset against each other as they have different payment methods, payment supplement code etc etc. The only common factor between these items is the company code and the vendor number.
And the current requirement is that, only these 2 fields - company code and vendor number need to be considered in offsetting the open items and all the other fields including the payment method etc should be ignored. So, after some research - I figured out that there is something called a grouping key that can be set in the configuration using transaction OBAP. I set the grouping key in OBAP. And this grouping key needs to be used in the vendor master screen for payments for that particular vendor so that all the other parameters will be overridden by this grouping key. FYI..I set this grouping key 02 to use only the vendor number.
Technically.. SAP says this should work. They also say that if it does not work, go and generate the program RSZGR000 as this program contains the respective code to make the payment run program understand that the grouping key is the overriding factor. So, I generated this program too and made sure the code exists. This grouping key is populated in the structure ZHLG1-PAYGR and the payment run program is supposed to understand that this is the overriding field for offsetting the invoices against credit memos. I debugged the payment run proposal and saw that it is populating this field in the structure.
So, I do all this and yet, my open items are not cleared using JUST the Company & vendor. It is still looking for the other fields like payment methods, supplment code etc.
I was looking up at the note 164835 and found that for automatic payment transactions the following fields need to be same for the documents that are being offset with each other: Currency, Receiver, Payment Mthod in the Item and Bank Details in the item.
I was assuming that once the grouping key is populated and used, all the other fields above should be ignored for offsetting.
Any help in this matter would be appreciated!!

I do not think that is the issue here. The issue here is that the payment methods are different for these invoices/cedit memos. One of the Credit Memo's has a blank payment method. So, the automatic payment program is not picking that document with blank payment method.
Invoice 1 has payment method C
Credit Memo 1 has payment method S
Credit Memo 2has payment method as blank
There is an option in the Automatic Payment Transactions screen where you enter the company code and payment methods. In the payment methods, we can enter multiple ones - so, I added S and C, but there is no way to tell the program to pick documents with blank payment methods too.
That is why the Credit memo2 is left out and not settled with other documents.
Please let me know if there is a way out for this.

Windows 8.1 update error 8007002 related to HP Keyboard Standard 101/102 key

Hi! While performing windows updates on my HP split x2 laptop machine with Windows 8.1 64 bits, i encountered the error 80070002. This error is relatd to windows update on HP Dev Company Keyboard Standard 101/102 key I have google any tried all the methods that i have found a) use windows update troubleshot -> it claimed fixed the problem. But when rerun the windows update, it encountered same failure.b) delete the contents in the Windows\SoftwareDistribution folders, reboot, and rerun windows update. Still facing same error. Pls kindly advice me how to fix this error? I would say most of the tricks that i have learnt from the Google is not helpful.Otherwise, i won't spend my time post in this forum. Kindly pls refer to atach screen shots. Thank you very much!

Nkboy, I received the same update today marked as Optional (HP Pavilion 17 Notebook). I have not been able to find any info on this update. Clicked on the "more information" on my HP Support Assistant and got nothing. I need someone to inform me exactly what this update does and if i really need it since it says "optional". It also stated that this was Released in July 2013 and published today 7/6/15 --- confusing re the date released and published. Also, received another "optional" update from HP Inc. - Other Hardware - HP Wireless Button Driver..... no additional info on this update either.

Windows 8 Key Issue

Here's my problem. Windows 8 came preinstalled on my computer; however, I accidently deleted the Windows 8 key from the bios and now Windows keeps asking me to enter the correct key. Since there is no longer a sticker with the key included with the computer I have no way of finding the key. Does HP keep a record of the keys tagged to the serial number? Or am I just out of luck?
I called HP Support about this and they told me to get the key off the CDs which were included with the computer. When I told him there were no CDs, he said I had bought a used computer mascarading as new because all of their computers ship with Windows CDs. When I disputed this he said that Microsoft could solve the issue for me. Microsoft said that HP could solve it. Can anyone help me? I'd rather not spend money on buying Windows 8
Thanks in advance,
Mike
This question was solved.
View Solution.

HP does not retain records of the keys issued . HP also does not ship Windows CD's with the computers unless they were specifically ordered. If you have somehow deleted the key then you are out of luck, sorry.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

B570 Keyboard Issue.... Keyboard stuck key issue....

Similar Messages

Maybe you are looking for