B570 Laptop - No display, POST or LED

Hi,
I have a 1 year old B570 laptop which will not boot. It will not show a display, power on, POST boot and the LEDs do not light up.
The problem has been on-going for a while and the laptop would occassionally refuse to boot. You would have to remove the battery and then it would start up. When this happened the laptop would appear to power on but it would not POST or display anything, However, the unit now seems to be dead.
I have tried removing the battery, charging the laptop and holding the power button in for ten seconds, but I still cannot find any sign of life. This leads me to think that it may be an issue with the motherboard?
Can anybody help?
Thanks,
Martin.

Bump

Similar Messages

  • HDMI Help? (Lenovo B570 Laptop)

    I have a B570 laptop with an HDMI port that sports a double headed arrow, which i assume signifies it's capable of doing both input and output, the problem is, when i plug in my PlayStation 3 to try to use my laptop as a screen, nothing happens and i don't know what to do.  Help?

    Hi Bachoman,
    Welcome to Lenovo Community!
    I understand your concern but I’m sorry to inform you that this feature is not supported in your B570 Laptop.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • External monitor works only works when laptop screen displays

    Hi there, I just connected a different (newer, but not brand new) external monitor to my T61.  When I toggle screens (fn-f7) the external display gets no signal in the 'external display only' position, but displays beautifully in the 'both' position.  This never happened with my old monitor.  I would like to use the external display and not have the laptop screen display.  Any ideas? Many thanks, Ellen

    H
    Try this:
    After connecting external monitor, press win key+p and thrn choose projector only.
    Have a nice day
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • Display output on LED TV from DisplayPort on zbook 15

    Hi,
    I have a notebook zbook 15 Product D5H42AV.
    On this laptop I have a DisplayPort output and a Thunderbolt output.
    I have bought on the market an adapter (not from HP) from DisplayPort to HDMI.
    I cannot get the output displayed on my LED TV (full HD).
    Could it be that the adapter supports only DisplayPort 1.1 and not 1.2?
    If I want to see the screen on TV, shall I use the a DisplayPort adapter or Thunderbolt adapter?
    Is there any way to troubleshoot why I cannot display the output on TV from my laptop?
    This question was solved.
    View Solution.

    Hi Provost,
    thank you for your feedback. I have tried but still not working.
    According to this document:
    http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA5-2657ENW
    it seems that I should connect the HDMI to DisplayPort:
    *DisplayPort connector supports a DisplayPort display, a HDMI display with an DP-to-HDMI dongle, a VGA display with a DP-to-VGA dongle, or a DVI display with a DP-to-DVI dongle.
    I have a Samsung TV Series 6 with 4 different HDMI input:
    HDMI1 (STB)
    HDMI2 (ARC)
    HDMI3
    HDMI4 (DVI)
    I have tried with all of them unsuccessfully. I'm afraid that my DP-to-HDMI dongle that I bought on a local internet shop and it's made in China is somehow not fully compatible with my zbook.
    Maybe I should buy the original one from HP.
    When I connect the laptop to TV I saw that somehow the TV see that the port is connected but it says "No Signal".
    Also pressing F4 and checking with the Screen Resolution windows (in Windows 7) shows the second display as VGA. So it looks it does not detect the DisplayPort.
    Is it possible that the port must be enabled (bios or Windows setting) or that I miss some drivers?
    Checking on the Internet I found that there are some adapter that can connect also to the thunderbolt port:
    https://m.cdw.com/shop/products/StarTech.com-Mini-DisplayPort-to-HDMI-Video-Adapter-Converter/197508...
    The product is described as compatible with zbook 15
    However the official HP site sell a dongle only for the DisplayPort:
    http://shopping1.hp.com/is-bin/INTERSHOP.enfinity/WFS/WW-USSMBPublicStore-Site/en_US/-/USD/ViewProdu...
    The adapter I'm using can be seen in this page:
    http://media.extron.com/download/files/userman/68-1887-01_B.pdf
    It's the "DisplayPort Male to HDMIF Active Adapter" (top right code 26-655-01).
    I'm a bit confused now. I don't know if I have to buy a different adapter or if there is a way to troubleshoot my problem and see if the DisplayPort is enabled and working on my laptop.
    Regards.
    Alberto

  • My laptop screen displays on reverse direction

    HP Pavilion DV6-2121er
    OS: Windows 7 Home Basic
    My laptop screen displays texts and symbols on reverse direction. For example, on the desktop "My computer"  - as "retupmoc yM".
    I did reinstall my OS, but it didn't help me.
    What problem may be? Please, help me!

    I have the same problem.  A more accurate description would be that the display is mirrored...
    If I view the reflection of my display in a mirror everything appears normal.
    If I view my display directly everything is reversed horizontally pixel by pixel (i.e.. mirrored).
    At no point during the boot process is the display correct.  As soon as the BIOS posts the screen is messed up so this issue has nothing to do with the display driver as it's not even loaded yet.
    My problem is actually slightly worse.  My display is mirrored and then shifted to the right half a screen length with pixels beyond the right edge of the screen getting wrapped around to the left side of the screen.  You can get a sense of the problem by doing or imagining the following scenerio:
    1) Take a screen shot of your desktop.
    2) Open the screen shot in photoshop and mirror it (not the same as rotating or flipping)
    3) Print the screen shot and tape the left edge of the paper to the right edge forming a tube
    4) Make the tube flat again by cutting it down what used to be the middle of the image.
    Please help HP

  • HT1477 When i disconnect my iPod 2nd Gen from my laptop, its display turns off and working freezes. Please help me.

    When i disconnect my iPod 2nd Gen from my laptop, its display goes off and working freezes. Please help me.

    The computer freezes?  There may be something wrong with the USB port.  If the laptop has more than one port, does this happen on any port?  If you are disconnecting the shuffle cable from the computer, does it make any difference if you disconnect the shuffle at the other end of the cable first, then disconnect the cable from computer?  Or if you currently disconnect the shuffle from cable first, try it the other way.
    You may be able to work around this problem, if you get a self-powered USB hub.  Something like this one
    http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
    There are many choices, but be sure to get one that has its own power supply.  You can leave the shuffle cable connected to the hub, and connect the shuffle to the hub, instead of directly to the computer.  This may provide a "buffer" for whatever is causing your laptop to shut off when the shuffle is disconnected.  Since the hub has its own power supply, it will not rely on the computer for power to re-charge the battery.

  • To display posting date in alv top of page area for transaction KOB1

    I want to display posting date given on selection screen of transaction KOB1 to the alv top of page area on final alv output .
    what are the possible solutions ?

    I want to display posting date given on selection screen of transaction KOB1 to the alv top of page area on final alv output .
    what are the possible solutions ?

  • Dilemma : the thunderbold display or the LED cinema to buy ?

    Dilemma : the thunderbold display or the LED cinema to buy ?

    since they cost the same amount of money, the thunderbolt

  • ARD on my laptop not displaying both monitors on my desktop

    I'm running ARD 3.2 on both my Macbook Pro laptop, and Macpro desktop. Both are running the latest version of Leopard. My desktop has dual monitors, and it seems before I upgraded to Leopard, ARD on my laptop would display BOTH of my desktop monitors (scaled down, of course). However recently, it stared to only display the desktop's primary monitor, and not even detect or display the second. I've been pulling my hair out trying to find a relevant setting, and searching the forums for someone with this issue. Does anyone know what's going on? Please let me know. Thanks in advance!

    For opening your domain file in Lion  or to switch between multiple domain files  Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiiled version with this link: iWeb Switch Domain.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • HP Photosmart C310 Series Printer Display and power LED not lit...still able to print.

    I am not sure what happened. I was printing, walked upstairs, came back down and the display and power LED on my Photosmart C310 were off. I thought the circuit for the outlet had tripped but that was not the case. I unplugged the printer, disconnected the power supply and let it sit for 2 minutes. Plugged it back in and nothing changed. Forced off printer/reboot?..nothing changed. Tried online utility. Useless. Is this common? Is there a solution? Any suggestions? Thanks in advance.
    Have had problems with HP and Compaq in past and obviously made a mistake buying again. Product is past warranty and I am not willing to pay to speak with a "representative" who is on a computer using a diagnostic tree program literally taking shots in the dark. Thanks but no thanks HP. I would love to Office Space this friggin' printer but I'll hold off for now.. 

    I experince the exact same issues and have for most of the time I have owned my C310A. I've gone through all the firmware upgrades, the useless patches etc. something is WRONG with the printer as my power modules continues to pump out the voltage after the printer shuts down(I've confirmed with a voltmeter). My printer will be printing a photo and the display will shut off, the power light and wireless LED lights go off BUT the photo continues to printer and the carriage will return to its resting spot THEN remain unresponsive till I go through the unplug routine. It's no wonder HP discontinued this printer and I'm throughly disgusted at tthe lack of quality in the components. I('ve gone through at leat 5 HP printers in the last6 years, each printer failing to either power issues or ink delivery systems. There is a very obvious lack of quality control. I feel as thoughHP sells the shoddy printers to force continual upgrades and flow of ink sales.  The design and engineering and features of the C310 A is to be commended but the qulaity and reliabilty of the mfg. product is abysmaly horrible. HP once had a solid quality control methodology that was second to none now  its just too little and too late.

  • P6n diamond, no post, no leds on the d-bracket

    Tried setting up my new P6N diamond today with a Q6600, and 8GB of Patriot memory.  No post, not LEDs in the d-bracket and no beep codes.
    Pulled out some RAM, tried it at 4GB, and at 2GB, no luck.
    Tried a E6300 and a Pentium D, and also some Muskin value-ram, same results.
    I don't think the system is overheating, it will run without posting for as long as I let it.
    I tried to 2 different PCI-E cards (X1900xtx, and 6600GT) as well as an MX4000 PCI card.  All components (except the PSU and motherboard) are known to work in other configs.
    I'd like to think there's something I'm missing, I've got both power connectors set up,  the PSU is a Thermaltake 750W, brand new.  I really don't want to have to RMA this thing.
    I also tried clearing the CMOS with the SW3 button as well as pulling the battery. 
    update:  tonight, I was able to see the 4 leds come on, they are very, very faint, so I couldn't see them in the daylight, they seem to flicker a little.  I've reseated the CPUs several times and still get no post, beep, etc, even removing the RAM gives no beep
    Pulling the RAM and CPU out and powering on results in the same results from the d-bracket, 4 very faint green leds

    My q6600 isn't a G0.
    I tried both 1GB and 2GB DIMMS, same results.
    Also, I don't get any LEDs on the board
    I also just tested the power supply with a different MB, and it works fine.
    Updated specs from the 'moan' guide...
    Intel Q6600 2.4GHz B3 Stepping
    Intel E6300 1.86GHz
    Intel Pentium D 930, 3.0GHz
    MSI P6N Diamond MS-7320 ver. 1.0
    Patriot Extreme PC2-6400 800Mhz 5-5-5-12 2GB DIMMs, in 1, 2 and 4 stick combinations
    Corsair (not muskin as stated in my previous post) Value Select PC2-5400 667Mhz in 1 and 2 stick combos
    HIS ATi X1900XTX 512MB DDR3 PCI-E x16
    BFG 6600GT 128MB GDDR3 PCI-E x16 
    GeForce MX4000 128MB PCI
    No Hard drives installed yet
    No Peripherals installed yet
    No OS installed yet
    ThermalTake Toughpower 750W ATX 12V 2.2 & EPS 12V
    +3.3v - 30A
    +5v - 28A
    +12V1 - 18A
    +12V2 - 18A
    +12V3 - 18A
    +12V4 - 18A
    -12V  - 0.8A
    +5Vsb - 3A
    combined+ 3.3 and +5V output 180W, max output 750W

  • TO ALL 7690m XT LAPTOP USERS - PLEASE POST TO SHOW HP WE WANT A REPLACEMENT OR REFUND

    Hello,  I am starting this thread to show HP that we HP customers did not spend $1000+ for a giant paper weight.  I purchased my HP Dv7t on Feb 6, contacted HP by Feb 9 to complain of graphics issues.  I was told that there is nothing HP can do till a newer graphics driver came out (which never came as we were promised).  I purchased this computer for one reason; to play games.  In the past 3 months it has been collecting dust, while I use my older laptop to play games on the lowest possible setting waiting impatiently for the new updates.
    The issue is HP's most recent Dv7t Quad laptops were being sold with a 7690mXT graphics card which is known as a gaming card.  HP also markets it as a gaming PC.  Yet I am unable to play Star wars the old republic, Mass Effect 3, and Battlefield 3.  The games just crash.  HP told us back in Feb that in a month a newer driver would come out, never did.  Other issues are over heating, GPU throttling down fps on movies and games, and random crashes.
    I read on formus today that HP achnowledges this issue and is now only replacing your Dv7t with their brand new option with the Nvidia GPU if you purchased your laptop within 21 days.  I feel as a loyal HP customer, with a faulty $1300 laptop withing its warranty, only purchased less then 3 months ago, reporting issues 3 days after receiving it, the fact HP cant solve their issues, deceived in purchasing a faulty laptop design, advertised as a gaming laptop, the fact I have helped more HP Customers on their forums then their own tech support, that we and I deserve a refund, or a replacement, so we may finally utilize our computers.  I have owned 5 computers in my life, never had an issue like this before, so [legal discussion:removed] they better do the RIGHT THING and give us our replacements. 
    Please post your issues so HP can see we were tricked into purchasing a faulty computer.
    Thanks.

    Kudos to all the gamers and other notebook savvy users for their posts about the 7690M and 7690M XT. In February, I purchased a dvt6 i7 quad core with 2 gb of Radeon 7690 m XT. I chose this notebook after reading about it on various forums where gamers mostly post. Not knowing much about computers it seemed the gamers knew a lot. I wanted a really nice laptop. with good graphics. I love visual arts and product design. I was thrilled to order this notebook and was assured by the HP sales staff that I was making a wonderful choice with the dvt6.. I got the 7200 hybrid drive and the 1080p display and looked forward to fast performance and visual wow. Because of the cost, over $1000, it was important to me the notebook stay in stride with future technical advancements for  the next two to three years., at least.
    I felt aggrieved when HP walked away leaving me alone with the 7690M XT. During the 21day return policy I hammered at testing the components. Lacking many computer skills,little did I know I had been I thrown into a radeon/ intel marriage, dysfunctional. at its quad core. Intuitively something about how the graphics worked seemed off. Calling tech support confused me more. Tech after tech told me I did not have an intel display adapter. I did not have switchable graphics. "Your order form only lists the Radeon card.!." I went back and forth with different techs with different takes. I imagined the techs were right , despite tne fact the device manager had two adapters, the order form trumped all.. One night I had this dream.
    Intel: " Honey, call the driver we need to take Crysis to school."
    Radeon: "Yes dear, but the AMD agency fails to update his license.".
    Intel: "That's it, I will take Crysis since all you do is look good and make promises you pretend to keep." "Why didnt you call for a new driver?"
    Radeon: "Call? When? All you do is takeover and run everything?" (Radeon huffs,turns red,and leaves.)
    Inel: " Oh,not another black out, I am leaving you for Nvidia !"
    I know very little about how a computer works I made repeated calls to tech support and was led down one dark alley after another. I have spent twenty+ collective hours with support. Reputably, I was told that I did not have an intel display adapter or switchable graphics: only the AMD 7690M XT. Last week my HP case manager mailed me an email with downloads to fix my graphics with updates from July 2011. Strange. I will have to investigate these updates as it seems I already have more current updates. The case manger insisted I do the downloads to see if my games play. The only other alternative he offered was to send my laptop in for repairs. I emphatically told him there were no repairs for the graphic problems because HP does not have a proper driver for the 7690M XT.
    [Legal Discussion Removed per Community Guidelines]
     

  • Laptop no display

    Hello.
    Lenovo B450
    The situation with this laptop. When you turn on the laptop gives signs of life: all the LEDs are lit, the cooler spinning hard disk works. But the image on the display and the image is not displayed on an external monitor.
    Closing the lid sensor is the Hall sensor. Motherboard with no external signs of overheating and short circuits. The graphics chip and chipset when basking.
    Do not understand in which direction to dig for repair. I request assistance.

    Hi Gohh,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with no display on your B450 laptop.
    Please try to perform the power drain by disconnecting the external devices connected, now shut down the system and remove the adapter and battery. Now press and hold he power button and now connect the adapter and connect only battery and adapter only,
    Try power on the system and check for the issue, check connecting only adapter, also check connecting only battery and check for the issue.
    Do post us back if the issue still persists.
    Best Regards
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • MSI Big Bang Xpower II did not post - Debug LED Code #67

        
    I need HELP...!
    I have a problem my board did not post , did not start and i have the DEBUG LED CODE # 67 displayed.
    There is my build
    MSI Big Bang Xpower II X79 LGA2011
    Intel Core i7 3820 LGA2011 Processor
    Corsair Cooling Hydro Series H100 CPU Cooler System LGA2011
    G.SKILL Ripjaws Z Series memory (F3-12800CL-32GBZL) DDR3 1600 PC3-12800 - CL10-10-10-30 (8192MB X 4) - 32GIG located in DIMM 1-3-5-7
    Gigabyte GTX570 OC Edition video card in slot PCI-E2
    Western Digital Velociraptor 300GB 2.5" SATA 3.0Gb/s 10,000 RPM
    LG BH12LS35 Blu-Ray Writer 12X BD-R 16X
    Ultra LSP-750 Power Supply
    Cooler Master HAF X EATX Tower Case
    When I put the power on, the power supply activated fans and drives spin, all the LEDs on the motherboard light up but nothing appears on the screen.
    No video signal at all and the computer stop and restrart every 15 seconds. When these reset occurs there is no beep on the speaker , nothing at all, no flashing screen either, nothing.
    The DEBUG LED display a sequence of flashing numbers 19 - 60 - 19- 60 - 67 and stop showing still the number # 67 for about ten seconds and then he reset again.
    I carefully followed the instruction manual for the installation, I installed the memory modules in slots 1 3 5 7, i put my video card in slot PCI-E2. all the power wire are connected correctly 1 x 24 pins ATX, 2 x 8 pins ATX, 1 X 6 pins , all the wire from the front panel are correctly connected to the m-connector in JFP1 & 2.
    Did i forget something, I don’t know what the debug led code # 67 exactly mean and what i have to do to fix-it
    Someone has an idea what is wrong or have any suggestion to solve this issue.
     Thank's all for your help.

     
    I followed some advice to remove the memory modules and this is actually caused by the use of memory but you will see I still have a curious bug.
    I referred to the instructions manual to the letter for the choice of DIMM SLOT to put the memory module in single, double, triple and quad channels.
    If I install 1 memory module in the DIMM SLOT  1 to operate in single channel, everything is normal and the motherboard  POST normally and show  the SETUP SCREEN.
    If I install 2 memory modules in  DIMM SLOT  1 & 3 to run in dual channel, everything is normal and the motherboard  POST normally and show  the SETUP SCREEN.
    If I install three memory modules in DIMM SLOT 1 - 3 - 5 to run in triple channel, everything is normal and the motherboard POST normally and show  the SETUP SCREEN.
    As soon as I install four DIMMs modules mémoiredans SLOT 1 - 3 - 5 - 7 to run in quad channel, the motherboard  freezes and does NOT POST and show  code 67 on the debug led and has reset itself every 20 seconds.
    I tried all my RAM modules alternately in both single channel and everything works normally.
    I did the same thing in rotation for both dual and triple channel and everything is still normal with all fourth memory modules individually.
     As soon as I put a fourth memory module it freezes and displays the code 67 or L9 dependent side as you look. 
    So my bug is my motherboard MSI Big Bang Xpower II do  not want  to work in quad channel.
    Do you have any idea where I should look for, is a setting in the BIOS  , I have flashed the bios to the latest version V1.5
    I included the screenshot of the BIOS to see if you can  notice something wrong. 
    Thank you

  • Hp pavillion dv7-3065 laptop will not turn on - led light blinks, ac's light on?

    HP Pavillion dv7-3065 with Windows 7.
    I fell asleep two days ago, and when I woke up yesterday, my laptop was off. (The battery very well may have died while I was sleeping, or just shut off on its own. I don't know which.) I tried turning it on, but nothing happened... except for the lightning bolt (LED light) blinking three times. No noises inside, blank screen, nothing aside those three blinks.
    For the record, I've already tried removing the battery. I've also tried removing the battery, removing the AC cord, and holding in the power button for 30+ seconds. It didn't work.
    I've tried removing the battery and running off AC. This still doesn't work. However, the laptop recognizes that it's plugged in; the little light by it is consistantly on. I've also tested my laptop with another AC adapter just to be safe. Nothing.
    My laptop has been tested without harddrive/etc, but I'm still at a blank. I don't know what else to do. My boyfriend, who's in school to be an IT, took it into his teacher, who messed around with it, and came up with a few conclusions.
    He believes that because the lights are flashing, he's confidant that my motherboard is fine. He said to replace the battery, and if that doesn't work, solder the ...I forgot what exactly, but basically it's the charging connection. I forget what exactly. My apologies there.
    However... I feel like replacing the battery would be a waste of money... Because regardless of battery, the laptop should still turn on with the AC cord. My boyfriend intends to bring this up and ask if he can just skip to the other thing anyway, but he doesn't have that class again for a week, and I'm at a loss of what else to do. Aside from that, his teacher says there's a limited number of other things that could be wrong...
    I was hoping to get some more input... 

    This won't help you out, but I am experiencing the same problem... I am gonna look on this post to see if you get an answer!
    I have the same problem! Except I did manage to get mine to turn on. After doing the hold the power down thing. Nothing happened. I did leave the lap top on cause I was irritated and walked away, about an hour later it came on. It let me turn it on and off a few times. Then stopped. Then leaving it sit on stopped working too

Maybe you are looking for