B75A-G43 low memory frequency

I have bough MSI B75A-G43 motherboard and four AMD AE34G1609U2-U memory modules (built by Patriot). In BIOS each of modules frequency shown as 1600, but memory frequency set to 1333, and no option 1600 provided in menu.
I have updated BIOS to latest version, but no success.
Is there some way to set memory frequency to 1600?

I see that, that is because it is AMD memory designed for AMD systems.
You will need to manually set the speed and timings although it SHOULD work even though it is not ment for intel.
Do you need help with this?
How to manually set the memory to it's spec (as stated on thier website)
Enter UEFI/Bios
Click OC
Goto DRAM FREQUENCY: AUTO  and change this to 1600
(At this point you can try to save and exit, but i prefer to set the timings manually.)
Next:
Change the Dram Timing Mode to either Link or Unlink either one will work.
Click on advanced dram configuration
Set the timings as follows:
tCL: 9
tRCD:9
tRP:9
tRAS:24
save and exit
It is possible that these settings will not work, if your system won't boot after doing this, you will need to clear the cmos and start over.
>>Clear CMOS Guide<<

Similar Messages

  • MSI Dragon on a Budget - B75A-G43 Gaming

    If you are tight on your budget and MSI “Z77A-GD65 Gaming” is out of the picture. Try instead MSI’s more affordable Dragon line – “B75A-G43 Gaming” motherboard.
    The board uses the Intel Chipset B75 Solution which actually is for Small Business Computing. With this, users can enjoy the “Small Business Advantage” Software Package which enhances the security and the productivity of your PC. Below are the said softwares:
    •Software Monitor – monitor critical software below the OS
    •Data Backup and Restore – run data backup on schedule
    •USB Blocker – block unwanted USB device classes
    •PC Health Center – optimize system on schedule even if PC is off
    •Energy Saver – automatically power on each workday morning or do scheduled shutdowns
    •Intel Wireless Display – Share and collaborate wirelessly
    Now, let’s move on with the gaming side of the motherboard. The board is capable of doing AMD Crossfire with x16 speed on the 1st slot PCIE VC GEN3 and the 2nd one at x4 PCIE GEN2. Killer E2200 Game networking is also fused into the board for maximum networking performance for online games and high-quality streaming media. Aside from this two, Sound Blaster Cinema makes the Audio quality top notch. You will be getting surround sound with just your stereo headphones, hear specific sounds in gaming environments and most of all sound effects are reproduced crystal clear.
    With MSI’s Military Class III components, you don’t have to worry even if your PC is turned on 24/7. Solid Capacitor lifespan is over 10 years and with the help of the Super Ferrite Choke, it improves the power efficiency and power stability of the board.  And if you feel that the performance of your system is not fast enough for you, OC Genie II can make your system faster by automatically overclock your system memory and processor.
    Comes now the bundles:
    Quote
    •User Manual, Reviewer’s Guide, Quick Installation Guide
    •Utility Driver DVD Disc
    •Dragon Badge
    •IO Back Plate
    •SATA 6GB/s Cables
    •Door Knob Label
    IO Ports from left to right:
    Quote
    •Gaming Device Ports – PS2 Combo port and 2x USB 2.0 Ports. These ports are optimized for high polling rate which lowers your mouse’s response time from 8 milliseconds to 1 millisecond. There are also gold plates on the ports which enhances the durability.
    •2x USB 2.0 controlled by the Intel Chip
    •HDMI Port
    •Killer Network E2205 Gigabit LAN and 2x USB 3.0 by Intel
    • VGA and DVI Ports
    •Realtak ALC892 8-channel audio with jack sensing
    So that’s it and I will just leave you guys a close shot of the Dragon Heatsink 

       Is it really true?  A current board that actually has PCI slots on it?   
    As a side note, LGA 1150 high end board, please have a PCI slot usable with an SLI setup!   

  • B75A-G43 GAMING does it support SLI

    Hi i own a B75A-G43 GAMING and am running it with an MSI GTX660 gaming OC, i read that it supports crossfire which i believe is AMD multi GPU, i can find nothing in my manual about SLI though ... Logic tells me that if it supports crossfire it should support SLI right ?
    Im looking to pair my MSI GTX 660 gaming with another one, as the card is very good im not looking to change it but i would like to SLI it with another.
    So will the B75A-G43 GAMING support SLI if it supports crossfire ?

    Like badboy already said it takes two R9 270X and will also run them in Crossfire. However like badboy already says one card would be working in a Slot being at X16 and one running in a slot being at X4. That will not only decrease the possible Crossfire performance but also cause a lot more microstuttering making the felt performance lower than it actually is judging by fps. It is way not recommended therefor to go for a multi gpu setup with this board. If having the money for two R9 270X better spend it for one card of a higher performance level like R9 290(X) or a GeForce GTX780.
    A single card will be way more fun.

  • Powerbook Lower Memory Slot Issue, what are my options?

    Hi there,
    I have a Powerbook G4 1.5ghz that I purchased in October of 2004. I had no problems with it until after upgrading the RAM to 2 x 512mb chips and then installing Tiger which resulted in me later notcing the missing RAM and learning about the lower memory slot failure issue.
    I find that sometimes if I remove the RAM and try and power it up and then replace the RAM again that the lower slot ocassionaly does come back. Trouble is though that the machine will either crash or I loose the other RAM slot when I have to shut it down. It seems to be so intermittent this way and I'm tired of constantly removing the RAM to fiddle about with it.
    My serial number begins W8441, so it isn't covered by the returns programe. I would call Apple Support, but I am put off by a £35 charge just to have them discuss and diagnose the problem.
    I'm in the UK and as I don't have Applecare and I'm not elgiable for the returns programe can anyone tell me what they charge for a logic board replacment? Looking at what they charge in the US, it's not cheap.
    I use my Powebook for Final Cut Pro, DVD Studio Pro, After Effects mainly and I had been alright with 1gig when it was working.
    I'm really trying to decide what the best thing to do is....
    - Do I pay for the logic board replacement, which I'm not really sure I can afford right now, or to be without my machine... especially as I have read that it can just fail again.
    - Should I just buy a 1gig stick for the upper slot and try and sell my old RAM, as that would be cheaper than getting the logic board replaced?
    It's a real shame that Apple doesn't seem to want to ackowledge that this effects other users as I'd been so impressed with everything about Apple up until now.
    Thanks for any advice.

    (Browse down for findings and questions).
    The notorious lower-memory-slot-bug has hit my finally too... I never believed it until now (and I've immediately signed the petition).
    I am outside warranty and I never bought Applecare either.
    Also my powerbook, a very dear machine to me, is a less common type to have this problem: a 1 GHz G4 15" FireWire 800 OS 10.3.9 type. Funny enough my older powerbook ( a G3 Bronze) is still running strong with no problems whatsoever.
    My G4 15" also has the "white spots" problem and a dead superdrive... I cannot believe how many hardware problems I'm having with this machine in comparison to all my older macs - even my sluggish powerMac 7200/90 never gave me this many headaches...
    Alright, I'll stop complaining for now.
    I've been able to browse the internet on this and found the following statements:
    The lower memory slot gets "fried" because of a OS 10.3.9 upgrade,
    or possibly due to overheating when the powerbook is put on the users' lap,
    or possibly due to picking the powerbook up by the corners so the metal gets bent.
    + I have only seen one case where someone's UPPER memory slot was defective.
    The solution to this problem (replacing the logic board) didn't seem to be definate in many cases so I'm reluctant to try this myself (and I have very little money). The alternative (replacing the upper slot memory with a bigger type of RAM) seems a bit scary to me,
    because I wonder:
    -will the upper memory slot RAM get "fried" eventually as well after a while?
    -do you need to have something installed in the lower slot or is it possible to just install one RAM card only?
    -are there more people with a 1 GHz PB that have this problem? It seems it's mostly people with a 1,67 GHz that have been bitten by this bug and maybe that's why Apple decided to give the majority a free repair. I am not sure whether that is a common policy, I am part of the minority it seems.
    As a solutions someone posted on a board that we should all buy KTA-PBG4333/1G RAM, but here in Dutch stores it is said this memory is only compatible with 17" powerbooks....
    Does anyone know if it is suitable for 15" as well??
    G4 Powerbook   Mac OS X (10.3.9)   1 GHz G4 Powerbook FW800

  • Low memory problem in nokia c5-03

    I wanted to install the Viber application for Nokia on my phone. But the memory is low and a message is displayed "Low memory on C".  I have deleted all my messages and images are also not present. I have checked the phone memory the total size of the contents is 21.3 kb. I have a phone memory of 75.4 MB, but the free space is just 2.99MB. There are about 30 MB SIS applications and 42MB 0f Other files. Can i delete these files??
    Solved!
    Go to Solution.

    Memory Full: Delete or remove some data from C: Phone memory"
    The phone notifies you if the phone memory or memory card memory is getting low. There can be different error messages shown this situation, e.g.:
    "Memory Full: Delete or remove some data from C: Phone memory"
    "Disk Full : Automatic retrieval of mailbox for exchange disabled"
    To free phone memory, transfer some data to the memory card with the File mgr application (select Menu > Applications > File mgr.). Select or mark files to be moved, select Options > Organise > Move to folder and then the destination folder.
    In order to free memory, you could also remove or move the following:
    Messages from Inbox, Drafts and Sent folders in Messaging.
    Retrieved e-mail messages from the phone memory.
    Saved Web pages. Clear the web browser cache to free some memory (select Options > Clear privacy data > Cache).
    Saved images, videos, or sound files.
    Contact information.
    Calendar notes.
    Downloaded application packages.
    If there are applications which are not needed any more, uninstall them (select Menu > Settings > Data mgr. > App.mgr. > Installed apps.).
    Any other data that you no longer need
    If possible, use the memory card instead of phone memory in the Camera application (select Options > Settings > Memory in use to define the memory where the images are stored). You can also use Nokia Suite to transfer images and video clips to your PC.
    If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first or Memory low. Delete some data, try deleting items one by one (starting from the smallest item).
    LAST OPTION Is hard reset TYPE in *#7370# code os 12345 if asked.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • I want to ask something about firefox. why firefox use very much memory? can you develop to reduce memory comsume? this problem is very distrub in my PC with low memory.

    I want to ask something about firefox.
    why firefox use very much memory?
    can you develop to reduce memory comsume?
    this problem is very distrub in my PC with low memory.
    == This happened ==
    Every time Firefox opened

    How much memory is Firefox using right now?
    # Press '''CTRL+SHIFT+ESC''' to load the Task Manager window
    # Click the Processes tab at the top. (Click once near the top of the window if you don't see tab
    # Find firefox.exe, and see how many kilobytes of memory it's using.
    Showing around 80MB when Firefox first starts is normal. Right now, I have 75 tabs open and it's using 500MB - this varies a lot depending on what you have in the tabs.
    Other than high memory usage, what other problems are you experiencing? (Examples include slowness, high CPU usage, and failure to load certain sites)
    Many of these issues, including high memory usage, can be caused by misbehaving add-ons. To see if this is the case, try the steps at [[Troubleshooting extensions and themes]]. Outdated plugins are another cause of this issue - you can check for this at http://www.mozilla.com/plugincheck

  • Low Memory Environment Render Issues...

    Howdy folks,
         I've been working on a 13 minute promotional video for a non-profit summer camp. It is made up of mostly still images with some ken burns effects, a narration track, a music track, some titles, and some logo overlays.
         I am doing this on a 3.2 Ghz P4 with only 1.5G ram under XP sp3. I realize this is not an ideal PPro box.
         Windows XP is configured to use 2 drives for VM paging (3Gigs each). All drives have over 100gigs of free space on them.
         Now until recently I've only had a couple of small issues which I suspected were related to trying to do this in a low memory environment. In one case a flash render would die at the same point every time (error was something along the lines of "did not return a valid frame"), and simply scaling down the still image clip at that point in the sequence so that it was closer to the project size took care of it. That method also helped in a few cases where some images would not render at all, and just appeared as black screens in the final video (the render process did not fail, but the end result was missing clips).
         Then there was one case it seemed to fail at random points. A simple reboot took care of that, and it exported just fine.
         But now, however..... Now it's back to failing at random points (sometimes it gets 3500 frames in... sometimes as far as 13400... or anywhere in between) and additionally, by viewing the incomplete flash video file with VLC (which I need to do in order to find out where it failed because PPro never tells me) I find that some of the images are black screens, as before.
         The problem now, is that it's never the same point of failure, and it's never the same images blacked out. And rebooting and or killing off extra processes does not help.
         Now this was rendering fine last week. Here's the kicker - I haven't changed much of anything since then. The project is still the same length, with just about the same number of cuts, tracks, and assets used. The only things I've done since then are:
         1) I duplicated the sequence so that I can make some changes unique to the web-version of the video, and still save the old sequence to go back to. The old sequence has remained untouched and I haven't even looked at it since then.
         2) Created 2 new titles and inserted them in place of some old ones in the new sequence which weren't appropriate for the web version of the video (only the text is different in these new titles... they are the same style, size, etc. as the old ones they replaced)
         3) I shortened some empty time/space/pauses between sections of the sequence.
         So those are all minor changes... but I can't shake the rendering issue no matter how many times I restart or scale down an image that was blacked out or appears at one of the random points of outright failure (again, with the "did not return a valid frame" issue).
         I did notice that after I duplicated the original sequence, the project takes much longer to open. Does having another sequence present in the asset bin use that much more resources? Even if the clips in that 2nd sequence use the same assets as another? I'm tempted to remove the original sequence and see what happens, but I don't want to lose it and have to un-edit the web version whenever I want to go back and re-render the DVD version.
         So basically I'm looking for anything that might cause the small changes I made to be giving me so much grief now.
         Any input is appreciated. Thanks.

    You may have a corrupt project. Try creating a new project and importing the old one into it.
    If you still experience problems then carefully do each of these troubleshooting tips. One or more of them is likely to help.
    Cheers
    Eddie

  • Low memory space

    Hi experts ,
    while working on a program i am facing runtime error of low memory space .
    can u help me on this.
    thanks & regards

    Hi,
    The internal table what you are using holding huge amount data.
    Then you will get "Low Memory Space" error.
    Thanks,
    Sriram Ponna.

  • Low memory (IPod 4,1)

    (IPod 4,1) From I installing ios 6 I have problem with memory :low memory

    Often when the low memory error occurs, best solution is to reboot the iDevice by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.

  • Low memory error with titler

    Every time I ad a title I receive a message advertising of low memory..
    I Have 2GB of memoery with a Intel dual processor

    Please provide
    these details to help us help you.
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 300 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • Low memory on iPad 2

    The diagnostics of my iPad 2 says that my iPad has low memory.however I have 21.5 GB available. Please help. Thanks

    I had this same issue with the new ipad, I kept getting logs generated that stated low memory.  I am not aware of any problems or issues this created, it was just sort of an informational warning not that there was anything wrong.  To “fix” it I just closed all the apps still in memory by double clicking the home button, holding your finger on one of the apps in the bottom window until they shake then hit the x to close them out of memory.

  • Low Memory Warning

    I started a new app today and got the following message:
    Low Memory Warning
    Air Harp has detected your device is
    low on memory. If a problem occurs
    please restart your device.
    No problem occurred. I think Stanza may have been using memory - I really don't know how to tell what's using memory.
    How do I tell what needs to be shut down?

    Pharmer,
    Looks to me as though you don't enough enough physical RAM to run as many processes as you currently are. 2GB of RAM is pretty low these days. Do me a favor and -- click Start -- Type
    MSconfig in the search bar and press enter -- Click the
    startup tab and see how many programs are checked to start on bootup. You can uncheck ones that you don't need running all the time. That should free up some memory to keep you going for a bit. But a permanent fix would be to increase your
    physical RAM.
    EDIT: Switching to basic desktop will reduce the amount of RAM needed to run Windows, which is why you haven't gotten the problem since.

  • Low memory errors.

    When I ty to play Destination Treasure Island I get a low memory error message. Is this bad? Could my iPad be bad? If I reboot the iPad it starts and lays but I haven't played for hours at a stretch yet either.
    Should I be concerned?
    Thanks.

    Multi-tasking happens in 4.2, it's not something that can be switched on/off (which not everyone likes). The only thing that you can do is go into the task bar (double-click the home button) and close other apps manually (press and hold one of them until they start to shake, then press the '-' in their top left corenr; press home, or touch the non-taskbar part of the screen when finished closing them). The task bar shows recently used apps as well as those that are running, so even if an app appears there it doesn't necessarily mean that it is active.

  • Low memory message

    On 2 occasions I had a message on my screen about low memory. I didn't read the whole message, though (stupid me, I know!!). I did a google search but no helful info. I did not search this forum before posting this...I guess I should have, but after typing all this decided to keep it.
    My storage is less than half full and I do not recall what apps this happened with. Not much to go on, but any help is appreciated.

    The iPhone has limited RAM - 128MB. This will be doubled with the iPhone 3GS.
    I've never recieved such an error message, and my 16GB iPhone 3G has just under 3GB free.
    This may have been a low memory mesage instead of a low available storage message - I've never recieved either one under any circumstances.
    Some apps, especially 3rd party apps may have a memory or RAM leak.
    Did your iPhone's general operation slow down when you got this error message? If so, power your iPhone off and on, or do an iPhone reset.

  • Low Memory.

    After setting for Mail for Exchange, my Nokia E7 phone shows low memory.
    I checked C Memory & there are only important files & that too of small sizes. All major Applications are installed in Mass Memory only.
    Is “Low Memory” issue due to Mail for Exchange? If so, is it possible to transfer / change the data of Mail Exchange to Mass Memory instead of Phone Memory? How?
    Appreciate all the help.

    I had this problem in my Nokia E72, hope its relevant.
    go to office>file manager>phone memory>logs>eng>ods
    are there multiple files. click on options select all and delete. if the no of files is quite large it will take a very long time to delete. or you can select 30-40 files and delete and then check the space. if the free space increases then you need to delete all.
    also try updating your firmware.
    Also checkout this thread http://discussions.nokia.com/t5/Eseries-and-Commun​icators/c-memory-low-on-Nokia-E7-00/m-p/1588222#M1​...

Maybe you are looking for

  • Compiler not embedding current assets / cache cleaning

    dear all, In FlashBuilder 4.7 (beta + release), it consistently happens that linked assets aren't (re)loaded when compiling. Cleaning the project doesn't seem to help. Restarting FB, then cleaning + building mostly reloads the assets. Is there a way

  • Custom error messages when booking traing in SAP LSO

    In SAP LSO i implemented the BADI IF_EX_LSO_CHECK_BOOKING~CHECK_BOOKING in the code i throw error message in the object ct_message_tab  of type DCMESSAGE. When the error is presented within the portal two things are not the way i want it. 1. The erro

  • XL Reporter Do Not Display Blank Records

    hey all, I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02.  However, when I uncheck "Do not display blank records," the generated report lists an instance of each

  • Since Firefox just upgraded, every LINK opens in a new window instead of a new or current tab. PLEASE HELP

    Since install of version 3.6.8, every link I click on opens a new window instead of the current or new tab. No changes in my settings were made. I had no problems until the 3.6.8 was installed.

  • App error 200 reset??? help me

    Hi, Can anyone help? I was doing a update but then accidently unppluged the phone so my blackberry torch started to reboot, it took a while then white screen App error 200 reset shows up i push it and then it trys to reboot again but same app error 2