B85-G43 A2 boot error when connecting more then one SATA driver

Hello everyone please help me.
As the title says, whenever i connect more than one sata driver (hdd or dvd) i get te A2 boot freeze....
Already changed cables, hard drives, and problem persist!
Sorry for my bad english, not my main language.
Board: MSI b85-g43
Bios: c.40
VGA: amd 7970 black edition
PSU: xfx pro1000w
Intel Core i5-4670K
MEM: HyperX 1600 8gb
HDD: kingston 120gb ssd and two SATAS
OS: Windows 7 64bit Ultimate

Svet, thx for replying.
I'm a noob here and have some doubts about this steps...
1.) >>Use the MSI HQ Forum USB flasher<< (Ok got it.)
A.) Download the attached archive and place it on your desktop. Do not decompress. (Ok got it)
B.) Download and install the Forum flash tool. (MSI HQ Forum USB flasher?)
C.) Insert your FAT32 formatted usb stick. (Ok got it)
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled. (win 8 options??? i'm running on a win7 ultimate 64bit)
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive. (Ok got it.)
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash. (ok got it, change boot sequence to USB and follow the directions.)
Yeah i know a lot of doubts, sorry for that, Working all day and at night i have to go to the university.
Thank you for your time!!!

Similar Messages

Can you connect more then one external screen to a mac with one mini display point?

Does any one know if you can connect more then one external screen to a mac, with one mini display point?

This company has a dual monitor solution for DisplayPort;
http://www.matrox.com/graphics/en/products/gxm/dh2go/

Can I connect more then one cDAQ-9188 in the same network?

Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.

You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Rendering Error when using more than one DataSheetView on a Enterprise Wiki-Page

Hi Experts,
how to reproduce:
Add two Custom Lists with some Fields (Add Lookup-Columns to both Lists).
Add a DataSheetView to each List and mark it as Default-View
Create a Enterprise Wiki-Page
Add a WebPart (Custom-List-1)
You will see the Content from List 1 as DataSheet-View (because it is the Default-View)
Add another WebPart below the previous added WebPart (Custom-List-2)
You will see the Content from List 2 as DataSheet-View (because it is the Default-View)
Notice that the First DataSheet has faulty Rendering. The Lookup-Columns having more than one 'Arror-Down' Image and it is even on the left. If you click into different Column, different row you get the same.
I can reproduce this behaviour anytime.
Environment: SharePoint 2013 Enterprise, IE10
If you use Development-Tools to identify first datarow of first DataSheet you can see that it has to do something with the related <Input>-Tags:
<div class="combobox-placeholder" id="jsgrid_combobox" style="left: 27px; top: 32px; width: 117px; height: 29px; border-top-color: currentColor; border-right-color: currentColor; border-bottom-color: currentColor; border-left-color:
currentColor; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; border-top-style: none; border-right-style: none; border-bottom-style: none; border-left-style: none; visibility: inherit; ; direction: ltr; min-width:
117px; background-color: transparent;">
<input class="cb-textbox " style="width: 156px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown" class="combobox-img" style="height: 29px;"
dir="ltr" type="button" value="▼"/><input class="cb-textbox " style="width: 84px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown"
class="combobox-img" style="height: 29px;" dir="ltr" type="button" value="▼"/>
Please have a look into it. Current Workaround for me is to have a Default-ListView in first WebPart. But then Customer has to click the Edit-Button to Change the Item in the releated EditForm. This is a Show-Stopper here!
With Best Regards,
Ronny

Hi Ronny,
According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
I tested the same scenario per your post, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How To connect More Then One database

How To Connect More the One Database In Single form.
I want to use Access And Oracle In the Same Form.
I want to Transfer data from Access file To oracle database.
Chirag

Hi,
You can do this using EXEC_SQL package. Please see Note 115540.1 on metalink which describes how you can connect to Ms Access and Oracle using EXEC_SQL.
Regards
Kavitha Prakash
Oracle Support

Acrobat stop when open more then one document

Hello
when I try to open more then one PDF Acrobat hang.
I must kill the process and then I can open one PDF again.
It does not work independently I try to open the second PDF by double-click or with the menu inside Acrobat.
I use Adobe Acrobat XI (11.0.0) on a Windows 7 64-Bit system.
I try to deinstall Acrobat completly and reinstall it but without success.
I could not really say until which time it works but I know that it is working in the near past.
Can somenody tell me why it doesn´t work?
What happen? What could be the reason?

Please update the Acrobat 11 to 11.0.6 via Help -> 'Check for Updates' option and then see if issue still exist.
Regards,
Anoop

B85-G43 Gaming A2 boot error when connecting 3 disk drive

my spec
core i5 4570
MSI b85 G43 gaming
apacer 4x2 GB ram
msi gtx 650 ti boost
1 samsung 840 EVO 128 GB SSD
1 x 2 WD Blue Hdd
1 sata dvdrw drive
Win 7 64 bit
here is my problem. whenever i connect one of my WD blue hdd this A2 code always come out.
already tried changing my cable, updating my bios to latest version (C7) it didn't work. so anyone here, please help me.

Quote from: david.chandra.73 on 17-October-14, 20:08:25
latest BIOS from MSI 12.7 and by the way, i've upgraded my PSU to Seasonic X-series 660w from Super Flower SF500P12A 500w. and this problem still exist
oki, thanks
Quote
1 x 2 WD Blue Hdd
can you please tell the exact models?

Error when connecting more than 50 users ??

I use database 8iEE & form server (9ias rel1) on different box to deploy form on the web
the error occur when user connect more than 50, but it's ok when connect to database using sqlplus
Is there someone has the same experience ?

I think this problem has been addressed and answered in this forum time and again …
Opening files or creating new files while in Full Screen Mode will cause a cursor offset in Photoshop CS4 (I don’t know if there are configurations where that does not happen, but best assume it just does); the common remedy is circling through the Screen Modes by hitting F on the keyboard three times.
Edit: The matter doesn’t seem to have made it into the FAQ, though. Maybe someone could add it there?

XBox Live lagging when connecting more than one la...

I have the BT Home Hub 2.0 B and when I am on XBox Live with one laptop connected to the hub I have no problems but as soon as more than one laptop is connected I have terrible lagging - please can anyone give me any suggestions. I have the UPnp set to ON and the XBox IP Address is set to always use this IP address on the hub.

Hi Stevemc5267,
It sounds to me like you are putting too much demand on your connection. With three devices attached they are all fighting for bandwidth therefore the speed left over for your Xbox live falls causing lag.
I would guess you are on the up to 8Mbps package. However if this is not the case post your hub stats from http://bthomehub.home and run a test via www.speedtester.bt.com and let us see the results.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Connecting more then one client computer to TC

Hello all,
I am upgrading from an Airport Extreme to TC 2GB.
The problem I am facing is that while everything works fine on the Airport Extreme, when TC is connected only one computer can use it. My question: how do I open the network to two more clients?
A bit more info, with maybe some clues:
The computer connecting is an iMac. Unable to connect are a MacBook Pro and an ipad.
TC gets it's connection from a TNN Aztec 600z modem with one enterence, which is, then, connected to an Audio Codes devise (voice over ip phone line) and then to the TC.
This is a DSL connection.
The MacBook Pro sees a network, connects to the same wireless netwrok as the iMac, with a Green light appearing in the Network CP next to "Wirless", but the browser can't connect.
Nothing changes between the Airport Express and the TC set up, in fact I even tried it with the same exact wireless network name.
Airport utility can connect to the TC and control it, Version 7.6 is installed. Still with AE everyone can connect but with TC only one machine.
TC is set up as a "bridge". all other set ups result in loss of connectivity to all machines.
I would greatly appriciate any and all insights, this is exremely frustrating and somewhat bizzar.
thanks,
Amit

You will need to explain a few more things.. you seem to have both extreme and express.. is this right or a typo??
Was the extreme also setup in bridge?
I want the IP address of all the computers/devices when connected to the Airport .. and having internet.
I then want the IP address with gateway and dns of all the computers/devices when connected to the TC.
Have you rebooted everything.. starting with modem.. voip ata, TC and computers/devices in that order, after you place the TC in the network. If not please do so.
Running the TC through the ATA could be the problem. What is the IP address of the ATA, and is it working as a router?
You will do much better either bridge the modem.. use pppoe client on the TC. (if that is allowed by your ISP). Then plug the ATA into the TC. You may have too many devices competing for IP address and router duties.
An alternative setup..
If you have an extreme.. as per your first sentence, and everything is working, you can simply plug the TC into that in bridge.. you will then need to sort out the various wireless overlapping channels etc. But the basics should work.

Dynamic sotring unpossible when have more then one group!

Hi Folks!
I have problem that is bothering me for two days. I would like to have dynamic sotring on my report but it is not possible when i have two groups. It is working only if i have one. If i have two it sorts by the first column in the group. I try to set property break order to none but then i get an error REP-1259: Group 'GroupName' has no break columns. Please advice me what are my options.

Hi,
the order-by statement, whcih can be dynamic via lexical parameters is only relevant for the lowest group. For the other groups the Property is relevant and it must be set for at minimum one column in every group. That's what you have seen.
What you can do is, to create a formula column in an upper group, use the sort-order for this column and set the formula column with that information you want to use for sorting.
Regards
Rainer

ORA-19228: XPST0008 -- undeclared identifier when using more then one var.

HI Gentlemen,
Given an XMLTYPE table with only one row. Under the root element there is a <header> and a <body> where the stuff inside the body has a different namespace. When I try to drill down with the statement in p.sql below, I always get
SQL> @c:\xsl\p
FROM z
FEHLER in Zeile 10:
ORA-19228: XPST0008 - nicht deklarierter Identifier: Präfix 'j' lokaler Name '' (undeclared identifier)
I also tried to insert a WHERE clause, it always complains with $j. When I am using only one variable, $i, it is OK. XML DB Developer's Guide has examples that are very close to this--they execute A1. CAn you help me where am I wrong?
Thank you very much, kind regards
Miklos HERBOLY
SELECT
   XMLQuery('xquery version "1.0"; (: :)
   declare namespace n1="urn:ehd/001"; (: :)
   declare namespace n2="urn:ehd/go/001"; (: :)
   for $i in /n1:ehd/n1:header
let $j := /n1:ehd/n1:body/n2:gnr_liste/n2:gnr
   return $i,$j'
   PASSING xml_document
   RETURNING CONTENT) as ziffer
FROM z
/

Hi Miklos,
You'll need parentheses to indicate that you're returning the sequence of $i and $j :
xquery version "1.0"; (: :)
declare namespace n1="urn:ehd/001"; (: :)
declare namespace n2="urn:ehd/go/001"; (: :)
for $i in /n1:ehd/n1:header
let $j := /n1:ehd/n1:body/n2:gnr_liste/n2:gnr
return ($i, $j)or shorter version (if there's only one header per document) :
xquery version "1.0"; (: :)
declare namespace n1="urn:ehd/001"; (: :)
declare namespace n2="urn:ehd/go/001"; (: :)
/n1:ehd/n1:header
, /n1:ehd/n1:body/n2:gnr_liste/n2:gnr
)

How to control when more then one ratiobutton active?

I used pnp LDB, in these i am created 6 radiobuttons.
Radiodutton 1 use : List Display
Radiodutton 2 use : Grid Display
Radiodutton 3 use : Paper Display
Radiodutton 4 use : Download
Radiodutton 5 use : Send Email
Radiodutton 6 use : Application Server
Here List & Grid display are working and remaining any one Radiobutton select and execute. It is show error i.e 'More then one radio button is active'.
How i can control it. Plese give me Idea about that.

Hi Thrimu,
Try to clear radio butttons in INITIALIZAATION event. So that, only one radio button will be active.
also, try to use AT-SELECTION SCREEN OUTPUT event.

Connection of more then one device to a PC

Hi,
I have a product which need to work with 4 devices (no specific model - each time can be a different device[s]), at the moment we are using the PC Suite, and we found a limitation that only one device can be connected to each server.
Is there is away to connect more then one device to a PC using the PC suite?
Thanks,
Idan

As far as I know the short answer is no. The same applies with acyive sync and windows mobile. You can only sync one device at a time as far as I know.

SSL error when connecting in SAP HANA Cloud Portal tutorial

Hi,
I'm going through the tutorial for SAP HANA Cloud Portal - SAP HANA Cloud Portal Developers Tutorial
Unfortuanatelly I have problems with deploying public destinations (page 9).
When I try to deploy the destination for the CRM back from the command console using neo command with relevant parameters and entering my password I get the following error:
ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuraiton/api/rest; server certificate might be invalid or untrusted.
Logfiles.
Session log
2014-08-18 15:53:59,579 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager$1: Get connection: HttpRoute[{s}->https://configapi.hanatrial.onedemand.com], timeout = 0 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] total kept alive: 0, total issued: 0, total allocated: 0 out of 20 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: No free connections [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Available capacity: 2 out of 2 [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,582 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Creating new connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] 2014-08-18 15:53:59,729 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnectionOperator: Connecting to configapi.hanatrial.onedemand.com/216.128.6.149:443 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection closed 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection shut down 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager: Released connection is not reusable. 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Releasing connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:54:00,037 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Notifying no-one, there are no waiting threads
Console log
2014-08-18 15:53:56,080 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Starting execution of command [get-destination] 2014-08-18 15:53:56,086 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] init() finished for [1] ms 2014-08-18 15:54:00,038 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] cleanup() finished for [0] ms 2014-08-18 15:54:00,046 FATAL [main] com.sap.jpaas.infrastructure.console.ConsoleClient: (!) ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuration/api/rest; server certificate might be invalid or untrusted com.sap.jpaas.infrastructure.console.exception.ValidationException at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:97) at com.sap.jpaas.infrastructure.console.command.UnsecuredRemoteCommand.getHttpClient(UnsecuredRemoteCommand.java:57) at com.sap.core.connectivity.config.cmd.ConfigurationConsoleCommand.createHttpClient(ConfigurationConsoleCommand.java:254) at com.sap.core.connectivity.config.cmd.GetAction.download(GetAction.java:79) at com.sap.core.connectivity.config.cmd.GetAction.run(GetAction.java:52) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:295) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:260) at com.sap.jpaas.infrastructure.console.ConsoleClient.run(ConsoleClient.java:235) at com.sap.jpaas.infrastructure.console.ConsoleClient.main(ConsoleClient.java:85) Caused by: com.sap.core.utils.infrastructure.validation.HostValidationException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:304) at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:95) ... 8 more Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397) at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128) at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:390) at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:148) at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:149) at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:121) at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:561) at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:415) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:820) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:776) at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:284) ... 9 more
BR
Beata

Hi Beata,
The CRM scenario is working again. We had to re install the Connector and deploy a new proxy app.
Therefore you would need to download the code from the GitHub repository again. The changes you need to do on your side:
1. Redeploy the new crm__public destination file - the updated destination now points to the new location of the proxy application
2. Update the code of the registration form scripts (form.js and form.spec.xml).
Regards,
Ido

B85-G43 A2 boot error when connecting more then one SATA driver

Similar Messages

Maybe you are looking for