B85-G43 nosound
System is completely mute. It had sound right after installing but after installing Nvidia drivers for GPU it disapeard.
Since that time I tested: win 7 32bit, win 8.1 64bit, even Ubuntu live;
various drivers from mobo's DVD, MSI website, Realtek website latest and older,
with my GPU and without, using only IGP.
and nothing:
Device Manger shows that all is installed properly
headphones are recognized when attached (both back and front socekt)
HD audio is primary device (it even shows green bars when sound is tested )
Just there is no sound.
Unmounting mobo and booting it out of case didnt change anything.
Is there anything more I can do before returning to the shop ?
same thing just happened to me today on B75A-G43 did you tried set the volume on the speakers to the max? only on max volume i hear on one speaker some very mute sound. So, i think that onboard audio died :(
Similar Messages
-
B85-G43 overclocking i5-4570K ?
What is the situation with overclocking (by adjusting multiplier) "K"-line CPUs on B85-G43 ?
Is it possible ?
Does it depend on BIOS version or CPU's production date ?
I want to buy B85-G43 with i3-4130 but change it in the future to some i5-4...K
There is a lot of videos and tests showing that OC is not impossible on MSI B85-G43, however Intel says that b85 chipsets do not allow any overclocking.The updated microcode from Intel was released around Aug 2013. You will see that most boards had a BIOS update around that time stating a microcode update. Some BIOS prior to that are still on the ste and certain manufacturers actually still have those marked as being able to OC
Problem with reverting to an older BIOS like that, it may introduce bugs in other areas that have been fixed in subsequent releases.
If you want to OC, get a Z board. There are m-ATX and ITX boards with Z chipsets and they do as well in OC'ing as the more expensive boards due to the thermal limitations of Haswell that usually kick in long before the limits of OC have been reached. -
B85-G43 A2 boot error when connecting more then one SATA driver
Hello everyone please help me.
As the title says, whenever i connect more than one sata driver (hdd or dvd) i get te A2 boot freeze....
Already changed cables, hard drives, and problem persist!
Sorry for my bad english, not my main language.
Board: MSI b85-g43
Bios: c.40
VGA: amd 7970 black edition
PSU: xfx pro1000w
Intel Core i5-4670K
MEM: HyperX 1600 8gb
HDD: kingston 120gb ssd and two SATAS
OS: Windows 7 64bit UltimateSvet, thx for replying.
I'm a noob here and have some doubts about this steps...
1.) >>Use the MSI HQ Forum USB flasher<< (Ok got it.)
A.) Download the attached archive and place it on your desktop. Do not decompress. (Ok got it)
B.) Download and install the Forum flash tool. (MSI HQ Forum USB flasher?)
C.) Insert your FAT32 formatted usb stick. (Ok got it)
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled. (win 8 options??? i'm running on a win7 ultimate 64bit)
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive. (Ok got it.)
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash. (ok got it, change boot sequence to USB and follow the directions.)
Yeah i know a lot of doubts, sorry for that, Working all day and at night i have to go to the university.
Thank you for your time!!! -
B85-G43 Gaming A2 boot error when connecting 3 disk drive
my spec
core i5 4570
MSI b85 G43 gaming
apacer 4x2 GB ram
msi gtx 650 ti boost
1 samsung 840 EVO 128 GB SSD
1 x 2 WD Blue Hdd
1 sata dvdrw drive
Win 7 64 bit
here is my problem. whenever i connect one of my WD blue hdd this A2 code always come out.
already tried changing my cable, updating my bios to latest version (C7) it didn't work. so anyone here, please help me.Quote from: david.chandra.73 on 17-October-14, 20:08:25
latest BIOS from MSI 12.7 and by the way, i've upgraded my PSU to Seasonic X-series 660w from Super Flower SF500P12A 500w. and this problem still exist
oki, thanks
Quote
1 x 2 WD Blue Hdd
can you please tell the exact models? -
HI, I don't see any file related to MSI B85-G43 Gaming Bios, I would like to update ME....
E7816IMS.C33 is the latest Beta
>>Use the MSI HQ Forum USB flasher<<
Mode 1 pointed at the archive
Or extract the files to a dos bootable usb and run the bat file manually. -
Hello, could someone tell what drivers i need to download for this motherboard?
All listed in download section on product site for your OS: http://www.msi.com/support/mb/B85-G43-GAMING.html#down-driver
-
MSI B85-G43 GAMING. Almost without audio
Hi guys !
I just bought a motherboard model B85-G43 GAMING. And I almost have no audio =(
I tried:
- Install the driver that came with the CD;
- Downloaded and installed the latest driver from the MSI website;
- Downloaded and installed drivers from realtek website.
Nothing works... I'm desperate ! I can't find a solution... PLEASE, if anyone could give me a hands up.
Really appreciate !Quote
What would exactly be "RMA the mobo"?
it means to send the board back to reseller or msi for repair/replacement
Quote
I just bought a motherboard model B85-G43 GAMING. And I almost have no audio =(
almost no audio is indeed very informative
Quote
And It's not exactly "without audio", there is audio it's just veeeery low..
you should tell this before
Quote
Nothing works... I'm desperate ! I can't find a solution... PLEASE, if anyone could give me a hands up.
have you done a new fresh OS installation after you got this new mainboard? [B85-G43 GAMING]
Quote
there is audio it's just veeeery low..
have you checked mixer settings, volume control?
what audio you've played? maybe the volume is low from the player?
have you tried to re-plug the speakers jacks to ensure its filled all the way to the audio ports?
have you tried a different speakers set? -
B85-G43 OC - possibile ?
Hi all !
Recently I bought a motherboard MSI B85-G43. I thought I was doing good business, because I read on many technical sites and watched many video presentations about the OC possibilities on this MOBO. At one big Polish portal benchmark.pl , i saw ensuring (2013-07-23) :
Quote
W odpowiedzi na doniesienia o aktualizacji mikrokodów (mającej zablokować możliwość przyspieszania procesorów na płytach bez chipsetu Z87), producent uspokaja swoich klientów i zaleca częste uaktualnienia BIOS-u – podobno będą one stale oferować nową funkcjonalność.
in english : Quote
In response to reports of a microcode update (having the ability to lock the CPU acceleration on non Z87 chipset motherboards without), the manufacturer reassures its customers and recommends frequent updating BIOS - apparently they constantly offer new functionality." about microcode update, and that MSI will support this functionality in future
I think I made a mistake because I have not found the most important information :
Quote
MSI will not promote OC on H87, B85 and H81 Chipsets
Stability and Quality outweigh cheap marketing gain
(2013-07-25)
What should I do at this point? I bought the i5 4670K, and I dont have OC option. Is it possible to upload the appropriate BIOS that unlocks the ability to multiplier oc, and adjust CPU ratio, ratio mode ? Can I somehow download appropriate BIOS ?
Sorry for my bad English.
Thanks for helpQuote from: bzik on 04-January-14, 21:12:11
All right - Intel prohibits overclocking options on H87 or B85 - right ?
But this not explain my questions...
Hi,
I have found a link for you, which explains ALL the things..
http://www.pugetsystems.com/labs/articles/Z87-H87-H81-Q87-Q85-B85-What-is-the-difference-473/
====EDIT====
Or to make it easier for you:
"The Z87 chipset is the most feature-rich chipset and is the only one to offer full CPU overclocking for supported (K-series) processors. This chipset can easily handle SLI/Crossfire configurations by allowing the 16 PCI-E lanes from the CPU to be divided into either a single x16 slot, dual x8 slots, or a single x8 plus two x4 slots. While this means that the Z87 chipset can support triple SLI/Crossfire configurations, we typically recommend against doing so except in isolated circumstances. In most cases a Socket 2011 system is a better option as the additional PCI-E 3.0 lanes will provide improved performance.
The B85 chipset is the "budget" business option and as such is very limited compared to the other business chipsets. As such, it does not support iSIPP or vPro. Like the Q85 chipset, it has four SATA 6Gb/s ports compared to the six found on Q87. The B85 chipset is a good option for systems that need only basic functionality without the various features found in the other business chipsets." -
Hello everyone,
I just bought my MSI B85-G43 mobo and Intel pentium G3258 processor and im not able to oc it? I have updated bios v.3.8 and multipler option in Bios is still blocked on x32, cant increase it : (
It is any solution to help me with it?
Sorry for my bad english btw.I wonder how it is with stability, as simple running is not enough
Get intel burn test run few times (5 enough) on max threads, then Prime95 for 6h or more (more for best answer about "OC") and then feed back about it
Quite surprised it works, but then this Pentium is simple unlocked version of the old one, so that might be the case it works? Nothing improved but unlocked it..
Anyways enjoy, maybe it will work fine so you don't have to bother with Z series board -
Hello
I'm planing to buy a new computer set with that motherboard MSI B85-G43 and i5-4460. On official MSI site I read Haswell-Refresh processors
are supported from Bios v3.7. There is my question here. Will the i5-4460 boot with a MSI B85-G43? I mean can I able to enter to BIOS and update it with a new version?
I don't have an older processor which work and supported on 100% on this motherboard.Thanks for answer and I think I will take standard Haswell instead Haswell Refresh. I don't want to have any problems. i5-4570 should be fine.
Anyway or btw. Is RAM memory Crucial Ballistix 2x4GB (BLS2CP4G3D1609DS1S00CEU) supported on this motherboard? I didn't see them on list (maybe is out of date) so I want to ask before buy.
edit// I found Crucial Ballistix is supported https://pcpartpicker.com/parts/memory/?compatible_with=msi-motherboard-b85mg43 -
[MSI B85-G43] Windows freezes watching videos
Hello folks,
My computer is freezing when I watch streams on Twitch and sometimes on Youtube too.
It also happens when I watch movies using Media Player Classic.
I can play games for hours and the system never got stucked.
Can somebody help me?
My specs are:
MOBO: MSI B85-G43 GAMING LGA
PSU: EVGA 500W 100-W1-0500-KR 500W, 80 Plus
GPU: EVGA GTX 970 FTW
RAM: DDR3 Corsair Vengeance CMZ8GX3M1A1600C10B 8GB 1600MHz
Processor: Intel Core i7-4790k 4.0GHz 8MB 4ª Geração LGA 1150
Ps. Sorry for bad english, it's not my main language. :DI was using Windows 8.1, but I formatted my pc and installed win 7 professional.
The problem happens on both OS.
When I get home I'll try to remove my GPU and test only on Intel HD 4600.
In other forums, I told that my Intel HD was not showing on "System Device's", they told me that it's normal, since my motherboard only uses the GTX, but I don't know. In my opnion, this video/stream it's Intel HD responsability.
I also read something about i7-4790k voltage on the BIOS, but I don't have no clue about what voltage it should or should not be. There are some people that had this problem becaus Intel Turbo Boost too, when I get home I'll check that too. -
MSI B85 G43 Gaming slow downloadspeeds
I've got the B85 G43 mobo, with the Killer E2205 Gigabit LAN controller.
I've tested my connection 5 times with Speedtest, and barely got 10Mbit up & 10Mbit down. I then tested it from the same site, same room, same cable even, on an older PC, and the results were higher.
When I check the speed in Network Center it says 10Mbit on the new PC, and 1Gbit on the 7 year old PC.
What I've already tried;
- Reinstalling drivers official site
- Disabling everything with 'Killer' in its name from startup & services
- This tutorial
- This tutorial to turn it into a Qualcomm
Getting lost here, I've had a lot of hope but download speed always stays the same. Atm I'm downloading BF4 but at a whopping 1MB/s, that takes about 10 hours, really sad. On my old PC I'd get 5 MB/s or even 8 MB/s, which is perfectly acceptable.Quote from: redangel745 on 11-February-15, 01:36:24
I'm now using these drivers, together with forcing it to run at Full Duplex 100Mbit. And it works!
I also bought a new switch, just to be certain. The previous Switch supported 10/100 Mbit, this one 10/100/1000 Mbit. My speed has gone x 10 though, thanks to the drivers (I think)
Quote
I also bought a new switch, just to be certain. The previous Switch supported 10/100 Mbit, this one 10/100/1000 Mbit. My speed has gone x 10 though, thanks to the drivers (I think)
why not 1000 then, but 100?
your cable is the issue now? -
MSI B85 G43 GAMMING - 1600 RAM ISSUES
Hello!
I bought MSI B85 G43
And i m having a problem with the RAM
Because the store man said to me, this Board can run the RAM at 1600hz
OK! I saw too in the MSI website...
And yes i can run that Frequency RAM... but exist a problem!
This Board can´t run the really CAS of my RAM!
My RAM is CAS9 and the Board run it at CAS11
So!
When i changed in the Bios the CAS11 to 9...
My PC Freeze all times and Restards!
So my quenstion is!
MSI B85 G43 DONT SUPPORT MEMORY 1600HZ WITH CAS9? ONLY CAS11?
If it supports, what I am doing wrong?
Thanks!Dont work!
When i played videos on youtube in FULL HD, 30 seconds laters my PC freeze and a moment later shut down..
I returned the RAM at CAS11, without XMP
And dont work too, the PC freeze / crashe again!
PC:
MSI B85 G43
I5 4670 3.4HZ
16X4GB G.SKILL 1600HZ
XFX 550W CORE EDITION
MSI GTX 970 4G OC
Someting is damaged, no?
Event Viewer:
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 10/12/2014 21:28:59
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: Paulo
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-12-10T21:28:59.706915500Z" />
<EventRecordID>3431</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Paulo</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event> -
[B85-G43 GAMING] UEFI BIOS [E7816IMS.Cxx]
E7816IMS.C40 ===> E7816IMS.C54
Changes:
01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
02. Fix Intel (R) Rapid Start Technology function fail.
03. DMI Link ASPM default to disable.
04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
a. Fix FixedBootOrder change boot option priorities issue.
05. Fix WHQL test PC Resume fail.
06. Fix some DMI string writeonce issue.
07. Change solution about associate item SATA Hot-Plug and External Sata.
08. Fix Serial(COM) Port1 Settings error.
09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
& Update MsiOc SharkBay Private Module m177
a. Patch XTU can't set BCLK ratio issue.
b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
timing save exit then change one memory to channel A.
c. Add new token to control OC page spec.
d. Modify EIST item and Turbo Mode item related code in OC page.
e. Move Core Ratio Limit item to OC main Page and modify related code.
f. Add CPU Ratio Apply Mode item and related code.
g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
h. Support multi step option select mode for Memory Try It ! function.
i. Move some function struct define and table define to new file.
j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
above default GT ratio and then enter setup change ratio to Auto.
10. Remove XHCI USB Mapping patch code.
11. Fix can't boot to OS after enter boot menu without choose any option.
01. Update code base to 4.6.5.4_VEB_1AQQW036.
02. Update MsiOc SharkBay Module m180
& Update MsiOc SharkBay Private Module m183
a. Fix sometimes CPU Base Clock not be apply issue when CPU Base Clock set to 125.03MHz.
b. Modify Extreme OC Config item string to Extreme OC Setup and modify option string.
c. Fix some coding define error.
d. Patch system sometimes always reset at POST issue when run memory fast boot.
e. Add auto adjust voltage related code when set CPU Base Clock over 175MHz.
f. Modfiy current VREF voltage dispaly function code.
g. Fix system unstable issue when use Corsair CMD16GX3M4A2666C11 memory and set XMP to
enabled and modify auto adjust voltage code for 7914.
h. Fix system unstable issue when use Team Vulcan-2133 memory and set XMP to enabled.
03. Fixed Display shows only 16bits of color when install NV Graphic card that VBIOS
support Optimus and set primary video adapter to IGD to Boot up with IGD output.
04. Resume PC Resume fail solution.
05. Fix M-Flash Boot/Recovery Issue.
06. Patch setup select Save & Exit random hang.
07. Patch WHQL win7 test BitLocker Drive Encryption USB BIOS Logo test fail.
08. Update MSI_XTU_SharkBay_m118.
& MSI_XTU_SharkBay_Private_m125.
01. Update CPU MicroCode - M32306C3_00000019(Intel(R) Haswell Processor C-0).
02. Fix system hang with POST code A2 when using WD 4TB WD40EZRX-00SPEB0 with exFAT format.
03. Enable the control of Active State Power Management on SA side of the DMI Link.
04. Fix boot menu function(F11) still detected IPV4 and IPV6 when enable Network stack and
then disbale Onboard LAN Controller.
1.switch to support dual microcode function in Project for Christopher's media
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.E7816IMS.C40 ===> E7816IMS.C54
Changes:
01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
02. Fix Intel (R) Rapid Start Technology function fail.
03. DMI Link ASPM default to disable.
04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
a. Fix FixedBootOrder change boot option priorities issue.
05. Fix WHQL test PC Resume fail.
06. Fix some DMI string writeonce issue.
07. Change solution about associate item SATA Hot-Plug and External Sata.
08. Fix Serial(COM) Port1 Settings error.
09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
& Update MsiOc SharkBay Private Module m177
a. Patch XTU can't set BCLK ratio issue.
b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
timing save exit then change one memory to channel A.
c. Add new token to control OC page spec.
d. Modify EIST item and Turbo Mode item related code in OC page.
e. Move Core Ratio Limit item to OC main Page and modify related code.
f. Add CPU Ratio Apply Mode item and related code.
g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
h. Support multi step option select mode for Memory Try It ! function.
i. Move some function struct define and table define to new file.
j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
above default GT ratio and then enter setup change ratio to Auto.
10. Remove XHCI USB Mapping patch code.
11. Fix can't boot to OS after enter boot menu without choose any option.
01. Update code base to 4.6.5.4_VEB_1AQQW036.
02. Update MsiOc SharkBay Module m180
& Update MsiOc SharkBay Private Module m183
a. Fix sometimes CPU Base Clock not be apply issue when CPU Base Clock set to 125.03MHz.
b. Modify Extreme OC Config item string to Extreme OC Setup and modify option string.
c. Fix some coding define error.
d. Patch system sometimes always reset at POST issue when run memory fast boot.
e. Add auto adjust voltage related code when set CPU Base Clock over 175MHz.
f. Modfiy current VREF voltage dispaly function code.
g. Fix system unstable issue when use Corsair CMD16GX3M4A2666C11 memory and set XMP to
enabled and modify auto adjust voltage code for 7914.
h. Fix system unstable issue when use Team Vulcan-2133 memory and set XMP to enabled.
03. Fixed Display shows only 16bits of color when install NV Graphic card that VBIOS
support Optimus and set primary video adapter to IGD to Boot up with IGD output.
04. Resume PC Resume fail solution.
05. Fix M-Flash Boot/Recovery Issue.
06. Patch setup select Save & Exit random hang.
07. Patch WHQL win7 test BitLocker Drive Encryption USB BIOS Logo test fail.
08. Update MSI_XTU_SharkBay_m118.
& MSI_XTU_SharkBay_Private_m125.
01. Update CPU MicroCode - M32306C3_00000019(Intel(R) Haswell Processor C-0).
02. Fix system hang with POST code A2 when using WD 4TB WD40EZRX-00SPEB0 with exFAT format.
03. Enable the control of Active State Power Management on SA side of the DMI Link.
04. Fix boot menu function(F11) still detected IPV4 and IPV6 when enable Network stack and
then disbale Onboard LAN Controller.
1.switch to support dual microcode function in Project for Christopher's media
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash. -
MOVED: B85-G43 OC problems on G3258
This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=182216.0I wonder how it is with stability, as simple running is not enough
Get intel burn test run few times (5 enough) on max threads, then Prime95 for 6h or more (more for best answer about "OC") and then feed back about it
Quite surprised it works, but then this Pentium is simple unlocked version of the old one, so that might be the case it works? Nothing improved but unlocked it..
Anyways enjoy, maybe it will work fine so you don't have to bother with Z series board
Maybe you are looking for
-
Is my iPod Touch 4th Gen broken?
I usually have my iPod on my table and it somehow fell on my bed or someone might have put it on the bed. I was asleep by the way. Anyways, I didn't notice it was on my bed because I was really asleep and when I woke up, the iPod was nowhere to be fo
-
Yes, I too cannot use the "Blackberry Desktop Software ( 4.7 or any other version )". I get all the same errors that I keep finding many others are getting. Microsoft's fault.. Blackberry's.. I really don't care, I would just appreciate some softwa
-
Version 4.2.1 (8C148) tried to download ibooks but it is not compatible for my phone so how the **** can i use my phone for reading pdf files. Typical apple **** again.
-
Hi everyone, In the "Define Rule for Object Selection" via SPRO we have created a custom rule Z_ESS_LEA_RULE5 which is based on the evaluation path O-S-P. This brings back a list of employees for a particular Org. Unit. This is working perfectly. How
-
After downloading updates in C5, camera rawstopped working. I am trying to download DNG CONVERTOR but when I press 'Download' it just times out. Is Photoshop having problems as I have tried for three days now.