Bacgflush error: Change REM profile

Hi Gurus,
I have tried to backflush a part number. I get this error:
'Changed REM Profile regarding generation of postprocessing records'.
From my knowledge we didn't chnge the REM profile and product cost collecter is also avilable.
Please help to resolve the error.
Thank you.
Naveen

Dear Naveen,
Check whether did you make any config changes in the REM profile in OSP2 or else assigned some other REM profile which
allows reprocessing.
In my understanding if already some reprocessing exists for that material in MF47,and if you try to change the REM profile and
try to backflush,this will give this error.
Check and correct me if i 'm wrong.
Regards
Mangalraj.S

Similar Messages

  • RM887- change rem profile regarding generation of postprocessing records.

    Hi,
    While doing MFBF (GR GI) I am getting error "change rem profile regarding generation of postprocessing records" Message No RM887. I am using same REM profile for many other materials for which MFBF is working fine. There are no COGI errors pendings for the materials for which I am gettinh error. But in MF47 there are some pending records which I neither can change nor delete, I am geting same message as in MFBF in MF47. So I have two issues here 1) How to adress error in MFBF. 2) Why records are seen in MF47 and not in COGI?
    Thanks
    Suresh.

    Dear,
    Please refer the OSS notes 383141,202654, 885798.
    In OSP2 Transaction, check whether the REM Profile having the Tick for "Create Cumulated post processing records".
    If this is not there, and allowing the entries to go to COGI with Execute Correction in dialogue mode "Optional" will be a problem
    Please try and come back.
    Regards,
    R.Brahmankar

  • Changed REM Profile regarding generation of postprocessing records

    Hello Team,
    I have tried to backflush a part number. I get this error:
    Changed REM Profile regarding generation of postprocessing records
    The intrigue here is that this same part number was backflushed last week without error.
    I will appreciate your inputs.
    Thank you in advance.

    Joel,
    Check the material master for changes in REM Profile assignment, looks like the REM profile assigned to the material does not allow Post Processing records, so if there are errors during backflush like less stock, no storage location, batch not assigned, system would give error and it would not allow you to post the backflush.
    If there are no changes in the material master for REM profile assignment then the assigned REM profile itself must have been changed in configuration in the path mentioned by fellow forum member. Please check and for "Error correction for backflushing" section definations.
    Regards,
    Prasobh

  • Kanban : Changed REM profile regarding generation of postprocessing records

    Dear Gurus,
    I am trying make a kanban container from empty to full and i am getting the below error message.
    Changed REM profile regarding generation of postprocessing records - RM887
    I have not change the production version or rem profile. This error is when i scan them to FULL so I have not used "Execute correction in dialog box mode" option in OSP2. NO COGI errors...
    Any advice is highly appreciated.
    Regards,
    Senthil
    Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:54 AM
    Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:55 AM

    Dear Senthilkumaran,
    Was there any changes made in the REM profile in OSP2 related to creating individual post processing records or cumulated,if not
    was the REM profile changed in the material master?
    Can you please check this and reply?
    Regards
    Mangalraj.S

  • Issues in REM Profile(AGI)

    Hi Gurus
    We are working of REM , we are using AGI Profile for Goods issue, from last 3 or 4 days we have started facing problem in that
    when we are running AGI , it is giving message (Changed REM profile regarding generation of postprocessing records & Collective mess. for mat. XXXXin plant XXX with version 0001 not executed on 20100319* )*  in this it is showing for one or 2 material whereas it is runnning fine for other materails
    It is also running fine for other 2 plants
    Please help me

    Hi,
    1. Did u change the Rem Profile any time recently ?
    Reg
    Dsk

  • Order Import failing with error "The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory."

    Hi All,
    I am getting this error while importing an internal sales order.
    “The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory.”
    I have tried to set mentioned profile as ‘Yes’. But still getting same error.
    Also, provided subinventory is present and active in given inventory organization.
    Please share if anybody encountered this before and have a solution.

    Hi 2878342
    Please refer the following metalink note, it should resolve your problem.
    Order Import Interface.Error Message Specified Subinventory Is Invalid To Use (Doc ID 406411.1)

  • Post processing errors in REM

    Hi Gurus,
    What is significance of post processing in REM?
    We have 4 options.
    1)     MF45 u2013 Post process Individual
    2)     MF46 u2013 Post process Collective
    3)     MF47 u2013 Post processing list
    4)     COGI u2013 Post processing individual Components
    I am able to use COGI and clear errors occurred in back flushing.
    But cannot under above first 3 transactions.
    System is taking to all materials where correction is needed for eg in MF47. When I select a material and change post processing record, taking me to screen of post processing list of component.
    Here I observe that bell , Batch determination and Stock determination are disabled. Where as these are enabled in COGI. What can be the reason behind? Any settings missing in REM?
    Pl. help me.
    Srini

    Hi Srini,
    To avoid this you can confirm the following things.
    1.Ensure that suffecicient stock is available in the backflushing locations of each materail.
    2.To prevent the generation of "post-processing list" you can block the BOM from getting backflushed if sufficient stock is not available in specified location for the BOM COMPONENTS. To do this change the "REM profile" to "002"in MRP4 view for the BOM MATERIAL.(if the profile is
    not available you can crate it through SPRO).
    3. To clear the existing Backlog use transcation MF47 and re-process(be ensure that required stocks is
    available for each bom component)
    Hope it will solve ur problem.
    Regards,
    R.Brahmankar

  • REM profile

    Hi,
    In Repetitve Manufacturing , i was doing Assembly backflush.
    If i want to do Activity backflush with reporting point, ( I have maintained Milestone control key also in Routing) whether i have to change my REM profile in Material master.?
    If i am changing , system shows the error related to costing.
    Help me out of this. I would like to understand this process clearly.
    Santhosh.

    Dear Santhosh,
    Assuming you have made the configuration changes to the existing REM profile in T.Code OSP2,now modify your routing/rate
    routing with operations containing milestone confirmation set control key.
    If my understanding is correct then I dont think a new PCC is required for the same material.Instead in KKF6N--->enter the
    material,plant,select the production version,now click on change mode--->Shift+F6 and then click on cost calculator for pre.cost
    estimate for the product cost collector(Shift+F1) and then save the data,now check in MFBF as I have explained in my earlier
    thread.
    check and revert back,
    Regards
    Mangalraj.S

  • Bloqued Stock Default into REM Profile

    Hi everyone:
    I need to know how can i be able to set the Stock Type to REM Profile, 'cause I need that the result of the Posting into MFBF T.code be Blocked Stock, instead of, Unrestr. Stock.
    I was trying by the REM Profile into: IMG guide: Production> REM > Control > Profile...  but... I don't get to find out the check or the configuration parameter to set this stock type. I know that into the MFBF there is a function with F5 to Change Detailed Setting but, I need this parameter pre set for all access into that screen and don't is changing it each time i go to this T code.
    Please & Thanks in advance for your help.
    Regards
    Omar Perea

    Hi OMAR ,
    Could you pleasse breif How you did the setting, even i require GR atomatic By MFBF, I tried with 103 it is giving Below error ,
    Update control of movement type is incorrect (entry 103 X X _ F)
    Message no. M7226
    Diagnosis
    The system could not find entry 103 X X _ F in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
    so could u explain me the process how u did ,
    Thanks in advance.
    Madhu

  • User Profile Incremental Sync does not views changes in profiles.

    User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD. 
    All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
    1.profile property is set up to sync with AD attribute (with EXPORT).
    2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
    3. sharepoint server 2010 SP1, "CU June 2012"  14.0.6123.5002
    4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
    there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
    which I resolved by clearing timer service cache.
    Help with advice, urls or solurions please..

    Hi  VlH,
    According to your description, the issue can be caused by the Profile or Profile Values table.
    You can check the event log and ULS log to see detail error message.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2013, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    For your issue you can refer to the similar thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
    Also a good blog for user profile synchronization:
    http://www.harbar.net/articles/sp2010ups.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Invoice EDI error : EDI: Partner profile inbound not available

    Hi  EDI experts ,
    We are connecting our SAP ECC 6 ( Ehp 4) system to 3rd party system Mincom via SAP PI, to send PO Creation message (Outbound) and receive Vendor Invoice message( inbound).  We already done all the settings..Output determination procedure, Partner Profile ( WE20) , Port creation , Condition Records, EDI settings in SPRO for invoice..etc as below:
    Logical system ( BD54)
    ECC system - EDACLNT112,
    PI systems u2013 IDACLNT210
    Third party u2013 LSMINCOM
    Port ( WE21)
    IDACLNT510 : For PI with RFC destination IDACLNT510
    Partner ( WE20)
    LSMINCOM :  (Partn.Type LS)
    Outbound parmtrs.- Partner Role- LS, Message : ORDERS , Port - IDACLNT510
    Inbound parmtrs.- Partner Role- LS, Message : INVOIC , Message Variant- MM, Process code u2013 INVL, Trigger immediately (Process code INVL have  Identification - IDOC_INPUT_INVOIC_MRM, Option ALE u2013 Processing with ALE services , Processing type- processing by functional module)
    Here PO Creation is working fine . IDoC of PO outbound message have below details :
    Recipient information:
    Port :     IDACLNT510 (Logical system & Port created in WE21 )
    Partner Number :  LSMINCOM   ( Logical system and Partner created in WE20)
    Partn.Type :  LS        
    Function :  LS     
    Sender information:
    Port :  SAPEDA ( donu2019t know how it created..but in WE21..it is not there)
    Partner number:   EDACLNT112 ( Logical system and Partner created in WE20)
    Partn.Type :  LS        
    Partner Role :Blank
    Just started testing, our PI team is sending the IDoC, with wrong information on partner & other data, so inbound IDoC failing with error u201CEDI: Partner profile not availableu201D. Oaky. I reprocessed these failed IDoCs by changing Partner data just opposite (i.e. Sender info as Recipient info & vice versa) to successful PO Creation O/B message in WE19 in EDIDC and when I click on u201CStandard Inboundu201D, then another window open giving error message u201CPartner profile not maintainedu201D and creates new IDoC with status 56
    EDI: Partner profile inbound not availableMessage no. E0337
    Diagnosis
    An inbound partner profile could not be found with the following key:
    /LSMINCOM/LS//INVOIC///X/
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    Procedure
    Please check the inbound partner profiles.
    Execute function
    I am not getting exactly what inbound partner profile could not be found or what is the problem here . Can anyone suggest me what should be the problem and solution on it ?
    Thanks
    NAP

    Narendra,
    Please advice what was the solution.

  • Error in Xchange profile

    Hi ,
    I want to change aai parameters to replace local to central SLD. But i am getting the following error in xi profile.
    http://hostname:50000/webdynpro/resources/sap.com/com.sap.xi.exprofui/XIProfileApp
    once logged in i am getting the below error.
    dbconnect.prop: failed to load properties file
    Please help me on this.
    thanks
    Kirthi

    Hi ,
    Thanks for the suggestion. In the note 1525193, while creating Java RFC destination XI_EXCHANGE_PROFILE it is mentioned like we need to enter the logon data of the user PILDUSER. But PILDUSER doenot exist either in PI 7.3 or in sol man(central SLD).
    Can you please tell me do  i need use the user maintained in SLDAPICUST of Sol man?
    Regards,
    Kirthi S

  • I Can't Change My Profile Picture... Please help!

    So for the past 3 weeks I havent been able to change my profile picture on Skype. :/ I mean I can still take a picture and use it but I want to use a picture that I already had. 
    But then when I go to the change profile picture option and click on the "Browse..." option it wont open at all!! And when I went to Tools > Options the options tab wouldnt open either and it would just make that noise if an error message would come on but an error message didnt come on at all! And when I try to close Skype by going down to the user bar at the bottom and right clicking > quit it would make that noise too! So now I have to manually close it by going down the File tab. I dont know whats going on with my Skype. Please help. :/

    Do you by chance have Logitech QuickCam webcam connected to your computer?
    You can also try to reset all Skype settings.
    Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Restart Skype.
    N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

  • Diff bet REM profile

    Hi,
    What is the diff between REM profile 0001- W/o activity backflush & 0002 - with activity backflush. Is it activity backflush is necessary?
    Regards,
    Dharma

    hi Dharma,
    the only difference between the
    >Final backflsh w/o activities profile 0001 &
    >Final backflsh w activities profile 0002
    is that in profile 0001 u cannot post the activities to the product cost collector while in profile 0002 u can when u backflush.
    the activities which are posted in the to the collector can be done based on
    >standard cost estimate
    >preliminary cost estimate
    standard costing is done usually at the start of the year and is not changed while preliminary costing calculates the costs for the  production process which can be for a particular production version or for a combination of BOM or Routing.
    so choosing between these two profiles depends on how u want the capture the cost while backflushing.
    hope this gives the required info
    regards,

  • Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

    Hi,
    Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
    DC:windows Server 2008 R2
    Domain functional level:Windows Server 2003
    When Winxp join domain, have no this error message.
    I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
    There have 3 suggestion in this article:
    1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
    Doesnt's work.
    2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
    On my DC, I run netstat -an, reslut as below:
     UDP    192.168.20.3:137       *:*
    3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
    We are not using IPV6.
    This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
    Please help to check this issue.
    Thank you very much.
    BR
    Guo YingHui 

    Hi Guo Ying,
    I have faced this critical error which makes over-writes the host names in the domain when you join.
    For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
    When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
    Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
    Final Resolution is as follows:
    You need to start the dns console on the DC & drop down the domain name.
    Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
    You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
    After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
    Regards
    Anand S
    Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Maybe you are looking for